Shear bond strength of orthodontic resins after caries infiltrant preconditioning

Objective:To investigate the influence of caries infiltrant preconditioning on the shear bond strength of orthodontic resin cements on sound and demineralized enamel.Materials and Methods:Stainless-steel brackets were bonded to sound or artificially demineralized (14 d, acidic buffer, pH 5.0) bovine enamel specimens using a resin cement or a combination of caries infiltrant preconditioning (Icon, DMG) and the respective resin cement (light-curing composite: Heliosit Orthodontic, Transbond XT, using either Transbond XT Primer or Transbond Plus Self Etching Primer; light-curing resin-modified glass ionomer cement: Fuji Ortho; or self-curing composite: Concise Orthodontic Bonding System). Each group consisted of 15 specimens. Shear bond strength was evaluated after thermo-cycling (10,000×, 5°C to 55°C) at a crosshead speed of 1 mm/min, and data were statistically analyzed by analysis of variance, Mann-Whitney test, and Weibull statistics. Adhesive Remnant Index (ARI) scores and enamel fractures were determined at 25× magnification and were statistically analyzed by regression analyses (P < .05).Results:The caries infiltrant system significantly increased the shear bond strength of Transbond XT Primer, Transbond Plus Self Etching Primer, and Fuji Ortho in sound specimens, and of all resin cements except for the Concise Orthodontic Bonding System in demineralized enamel. Overall, caries infiltrant preconditioning decreased significantly the number of enamel fractures, but it did not affect ARI scores.Conclusion:Preconditioning of sound and demineralized enamel with the caries infiltrant system did not impair but rather increased the shear bond strength of most orthodontic resin cements while decreasing the risk of enamel fracture at debonding.     

Clonal evolution in CLL patients as detected by FISH versus chromosome banding analysis,and its clinical significance

The acquisition of new aberrations during the course of chronic lymphocytic leukemia (CLL) named clonal evolution (CE) is usually detected by one of the two methods: chromosome banding analysis (CBA) and interphase fluorescence in situ hybridization (I‐FISH). The purpose of this study was to compare the usefulness of FISH and CBA for detecting CE and to evaluate its influence on clinical outcome. FISH and CBA were performed at two time points: baseline and follow‐up. Thirty‐eight previously untreated patients with CLL were included in this study. CBA and I‐FISH revealed CE in 15 (39.5%) and 10 (26.3%) patients, respectively. High‐risk CE was detected in six cases by CBA and in five cases by I‐FISH. In four cases with CE‐dependent 17p abnormalities detected by CBA, metaphase FISH was needed for the confirmation of 17p13.1 deletion. Time from first‐line to second‐line treatment (TTST) and overall survival (OS) did not differ between patients with and without CE, irrespective of the CE‐detecting method used. However, shorter OS (P = 0.043) and TTST (P = 0.006) were observed for the patients with potentially relevant CE (rCE) detected by CBA, in which acquired aberrations were present in at least 20% of undivided cells and/or changed baseline karyotype to abnormal or complex and were not resulting from 13q deletion. Our results suggest that some, but not all, CE‐dependent aberrations detected by CBA influence clinical outcome. Moreover, I‐FISH, which was aimed at detecting aberrations of prognostic significance, was found to be more precise than CBA in their detection, especially TP53 deletion.     

Postextrasystolic Repolarization Abnormalities in ST‐U Segment in Patients with Ventricular Arrhythmias

Background: Changes in U‐wave amplitude after premature ventricular contractions (PVC) are known as prognostic markers in the long QT syndrome dependent on bradycardia. The purpose of the study was to find correlation between postextrasystolic ST‐U segment changes and a history of sustained ventricular tachycardia or ventricular fibrillation (VT/VF). Methods: The ST‐U segment configurations were taken from the 24‐hour ambulatory ECG. The comparison of the morphology of these segments was performed between sinus beats preceding PVC's and first postextrasystolic beats. Population: Two groups of patients were evaluated: 1) 32 patients with VT/VF history (VT/VF group), and 2) 36 patients with potentially malignant arrhythmia (structural heart disease with frequent PVCs and/or nonsustained VT‐nsVT) tnon‐VT/VF group). Results: We found T‐wave changes in 8 patients (25%) from the VT/VF group and in 12 patients (33.3%) from the nonVT/VF group (P = NS) and U‐wave changes in 13 patients (40.6%) and 3 patients (8.3%), respectively (P < 0.05). Other ECG indexes related to PVC's were also considered: RR interval, coupling interval (Cl), prematurity index (Pl), and postextrasystolic pause (PP). The analysis of these ECG indices revealed, when compared with patients without T‐U‐wave changes, that the occurrence of U‐wave changes was significantly related to longer RR interval of the sinus rhythm preceding PVC: 1025 ± 211 vs 918 ± 200 ms (P < 0.05). The prematurity index was lowest in patients with U‐wave changes: 0.54 ± 0.12 vs 0.65 ± 0.16 (P < 0.01) while postextrasystolic pauses leading to the postextrasystolic U‐wave changes were significantly longer: 1383 ± 223 vs 1130 ± 247 ms (P < 0.001). Cl did not differentiate patients: 556 ± 108 vs 584 ± 117 ms (P = NS). Conclusions: Postextrasystolic changes in ST‐U segment configuration are dependent on bradycardia, low prematurity index of the PVC, and the lengthening of the postextrasystolic pause. U‐wave changes more frequently appeared in patients with malignant arrhythmias. Follow‐up study is needed to assess if they might be predictive for the occurrence or reoccurrence of arrhythmic episodes. A.N.E. 2002;7(1):17–21     

A New Preparation Method of Cement with Photocatalytic Activity

The studies of some mechanical properties and photocatalytic activity of new cements with photocatalytic activity are presented. The new building materials were obtained by addition of semi-product from titanium white production. Semi-product was calcined at 300 and 600 °C for one, three, and five hours and then this material was added to cement matrix in an amount of 1 and 3 wt.%. New materials were characterized by measuring the flexural and compressive strength and the initial and the final setting time. The photocatalytic activity was tested during NOx photooxidation. The cement with photocatalytic activity was also characterized by sulphur content measurements. The measurement of reflectance percentage of TiO₂-loaded cements in comparison with pristine cement and TiO₂ photocatalyst calcined at 600 °C were also performed. It should be emphasized that although in some cases, the addition of photocatalyst reduced the flexural and the compressive strength of the modified cements, these values were still within the norm PN-EN 197-1:2012. It was also found that the initial and the final setting time is connected with the crystal size of anatase, and the presence of larger crystals significantly delays of the setting time. This was probably caused by a water adsorption on the surface of anatase crystals.     

Research into the Effect of Grain and the Content of Alundum on Tribological Properties and Selected Mechanical Properties of Polymer Composites

The subject of the research is a polymer composite with a matrix base of epoxy resin L285 cured with H285 hardener, and a physical modifier of friction in the form of alundum. The article presents an analysis of findings of tribological examinations. The authors evaluated the influence of the modifier properties in the form of alundum, i.e., mass share and grain size, on the abrasive wear of a composite, defined as loss of weight as well as on roughness parameters and selected mechanical properties. The tribological examinations have been extended by measurements of hardness and density of the prepared composites. The obtained results of tribological examinations showed an increase in the average value of weight loss in relation to the loss of sample weight loss between the cycles. The influence of both the grain size and the mass percentage share of alundum upon the increase in the longitudinal modulus of elasticity was also observed. On the basis of the obtained results, it was found that alundum of grain sizes equal to F220 and F240 exerted the best influence on the reduction of abrasive wear of the tested samples. In the case of F220, it was 14.04% of the average value of the weight loss between the cycles for all percentage shares of the used grains.     

Mechanical and Thermal Dehydrogenation of the Mechano-Chemically Synthesized Calcium Alanate (Ca(AlH4)2) and Lithium Chloride (LiCl) Composite

LiAlH₄ and CaCl₂ were employed for mechano-chemical activation synthesis (MCAS) of Ca(AlH₄)₂ and LiCl hydride composite. After short ball milling time, their X-ray diffraction (XRD) peaks are clearly observed. After ball milling for a longer duration than 0.5 h, the CaAlH₅ diffraction peaks are observed which indicates that Ca(AlH₄)₂ starts decomposing during ball milling into CaAlH₅+Al+1.5H₂. It is estimated that less than 1 wt % H₂ was mechanically dehydrogenated in association with decomposition reaction. After 2.5 h of ball milling, no Ca(AlH₄)₂ diffraction peaks were observed on XRD patterns which suggests that Ca(AlH₄)₂ was decomposed. Thermal behavior of ball milled powders, which was investigated by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC), indicates that a certain fraction of Ca(AlH₄)₂ could have been disordered/amorphized during ball milling being undetectable by XRD. The apparent activation energy for the decomposition of Ca(AlH₄)₂ and CaAlH₅ equals 135 kJ/mol and 183 kJ/mol, respectively.     

Ethanolic extract of Brazilian green propolis sensitizes prostate cancer cells to TRAIL-induced apoptosis

Prostate cancer represents an ideal disease for chemopreventive intervention. Propolis possesses immuno-modulatory, anti-tumour and chemopreventive properties. The tumour necrosis factor-related apoptosis-inducing ligand (TRAIL) is an important endogenous anti-cancer agent that induces apoptosis selectively in tumour cells. However, some cancer cells are resistant to TRAIL-mediated apoptosis. Naturally occurring phenolic and polyphenolic compounds sensitize TRAIL-resistant cancer cells and augment the apoptotic activity of TRAIL. The ethanolic extract of Brazilian green propolis (EEP) is rich in phenolic components. Our in vitro results indicate the potential targets in the TRAIL-induced apoptotic pathway for the cancer chemopreventive activity of Brazilian propolis. We examined the cytotoxic and apoptotic effects of Brazilian EEP and its bioactive components in combination with TRAIL on LNCaP prostate cancer cells. The chemical composition of Brazilian green propolis was determined by high performance liquid chromatography-diode array detection. The cytotoxicity was measured by 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl-tetrazolium and lactate dehydrogenase assays. Apoptosis was detected using annexin V-FITC by flow cytometry and fluorescence microscopy. The mitochondrial membrane potential (?Ψm) was evaluated using DePsipher staining by fluorescence microscopy. Flow cytometry was used to analyse death receptor (TRAIL-R1 and TRAIL-R2) expression in LNCaP cells. The inhibition of nuclear factor-κB (NF-κB) (p65) activation in cancer cells was confirmed by the ELISA-based TransAM NF-κB kit. The LNCaP cells were shown to be resistant to TRAIL-induced apoptosis. Our study demonstrates that EEP sensitizes TRAIL-resistant prostate cancer cells. The main phenolic components detected in Brazilian green propolis are artepillin C, quercetin, kaempferol and p-coumaric acid. Brazilian propolis and its bioactive components markedly augmented TRAIL-mediated apoptosis and cytotoxicity in prostate cancer cells. Brazilian EEP enhanced the expression of TRAIL-R2 and the activity of NF-κB in LNCaP cells. The co-treatment of prostate cancer cells with 100 ng/ml TRAIL and 50 μg/ml EEP increased the percentage of apoptotic cells to 65.8 ± 1.2% and caused a significant disruption of ?Ψm in LNCaP cells. We show that Brazilian EEP helped cells overcome TRAIL resistance by engaging both intrinsic and extrinsic apoptotic pathways and regulating NF-κB activity. The data demonstrate the important role of Brazilian green propolis and its bioactive compounds in prostate cancer chemoprevention through the enhancement of TRAIL-mediated apoptosis.