Global oral health inequalities in incidence and outcomes for oral cancer: causes and solutions

The mouth and oropharynx are among the ten most common sites affected by cancer worldwide, but global incidence varies widely. Five-year survival rates exceed 50% in only the best treatment centers. Causes are predominantly lifestyle-related: Tobacco, areca nut, alcohol, poor diet, viral infections, and pollution are all important etiological factors. Oral cancer is a disease of the poor and dispossessed, and reducing social inequalities requires national policies co-ordinated with wider health and social initiatives - the common risk factor approach: control of the environment; safe water; adequate food; public and professional education about early signs and symptoms; early diagnosis and intervention; evidence-based treatments appropriate to available resources; and thoughtful rehabilitation and palliative care. Reductions in inequalities, both within and between countries, are more likely to accrue from the application of existing knowledge in a whole-of-society approach. Basic research aimed at determining individual predisposition and acquired genetic determinants of carcinogenesis and tumor progression, thus allowing for targeted therapies, should be pursued opportunistically.     

Dental practitioners in Israel: past, present and future

Since 1980 various studies have been published in Israel dealing with dental manpower issues, utilizing several methods such as manpower to population ratio. The dental literature pointed out that dentistry in Israel has an over supply of dentists and that manpower to population ratio is one of the highest in the world 1:770. All studies were based on the information provided by the Ministry of Health which showed that Israel has over 9500 dentists. The Israel Central Bureau of Statistics figures showed a much smaller number which was 5700 active dentists. This enormous gap in between two sources of information, following strict examination of the data revealed that the Bureau of Statistics information is reliable and hence, the real manpower to population ratio in Israel in 2008 was 1:1271. Prediction of manpower is extremely important and the base line information is crucial for future evaluations.     

Effects of low power red laser on induced-dental caries in rats

OBJECTIVE: The purpose of this study was to investigate the effects of low power red laser associated with acidulated phosphate fluoride on the development of induced-dental caries in rats. DESIGN: Dental caries were induced in molars of 40 rats divided into five groups: control group (CG), the teeth were not submitted to any treatment; laser group (LG), teeth were irradiated with a low power red laser (LPRL), power of 30 mW and dose of 5 J/cm(2); fluoride group (FG), teeth were treated with topical acidulated phosphate fluoride (APF) 1.23% applied for 4 min; laser+fluoride group (LFG), teeth were irradiated with LPRL followed by APF; fluoride+laser group (FLG), teeth were treated with APF followed by LPRL. The animals were killed after 48 days, and the first and second molars were extracted to analyze the caries lesion area, microhardness, and calcium and phosphorus ratio. RESULTS: There were no statistical differences among FG, LFG, and FLG regarding to caries area and microhardness, although the caries area were smaller in LFG. Ca/P ratio did not show significant differences among all groups. CONCLUSIONS: Although LPRL before APF application appeared to diminish the caries progression, LPRL did not present any additional benefit compared with acidulated phosphate fluoride on the prevention of induced-dental caries in rats.     

Performance of Five Commercially Available Tooth Color-Measuring Devices

PURPOSE: Visual tooth color assessment is neither accurate nor precise due to various subjective and objective factors. As newly developed tooth color-measuring devices for dental application provide the possibility of a more objective means of color determination, their performances in vitro and in vivo must be evaluated. The objective of this study was to evaluate the accuracy and precision of five commercially available tooth color-measuring devices in standardized and in clinical environments. MATERIALS AND METHODS: In an in vitro study, standards (A1, A2, A3, A3.5, and A4 shade tabs of Vita Lumin) were measured five times with five electronic devices (ShadeScan, Easyshade, Ikam, IdentaColor II, and ShadeEye) by two operators. In an in vivo study, the right upper central incisors of 25 dental students were measured with the same electronic devices by a single operator. Vita shade tab codes were expressed as CIE (International Commission on Illumination) L*a*b* values and in terms of the precision and accuracy of DeltaE color differences. The Mann-Whitney statistical test was used to analyze the differences between the two operators in the in vitro study, and the Kruskal-Wallis one-way analysis of variance on ranks with the post-hoc Tukey test was used to analyze the accuracy and precision of electronic devices. RESULTS: No statistically significant difference was found between the different operators in the in vitro study. The obtained precision was Easyshade > ShadeScan approximately equal Ikam > IdentaColor II > ShadeEye. The obtained accuracy was Easyshade > ShadeScan approximately equal Ikam > ShadeEye > IdentaColor II. In the in vivo study, the Easyshade and the Ikam were the most precise, and the ShadeEye and the IdentaColor II were more precise than the ShadeScan. With respect to accuracy, there was no statistical difference between the ShadeScan, Ikam, and the Easyshade. The IdentaColor II was considered inaccurate (DeltaE(a)= 3.4). CONCLUSIONS: In the clinical setting, the Easyshade and Ikam systems were the most reliable. The other devices tested were more reliable in vitro than in vivo.     

Effect of oxygen inhibition of self-etching adhesives on enamel-dentin polymer bond

PURPOSE: To determine effects of light curing of self-etching adhesives under ambient air or nitrogen on inhibition depths, enamel and dentin bond strengths, and marginal adaptation in dentin cavities. MATERIALS AND METHODS: The adhesives investigated were: AQ Bond (AQB, Sun Medical; Kyoto, Japan), iBond (IBO, Heraeus Kulzer; Hanau, Germany), One-Up Bond F II (OUB, Tokuyama; Tokyo, Japan), and Prompt L-Pop (PLP, 3M/ESPE; Seefeld, Germany). Inhibition layer thickness (ILT) was microscopically measured on 3 disk-shaped specimens each. Shear bond strengths (SBS) on enamel and dentin (n = 8) were determined after 10 min and 24 h water storage of bonded composite specimens (Venus, Heraeus Kulzer). The marginal adaptation of bonded Venus restorations in cylindrical dentin cavities was microscopically evaluated after 10 min of specimen storage (n = 8) in water. The data were statistically analyzed using parametric and nonparametric ANOVA and post-hoc tests at p < 0.05. RESULTS: Adhesive curing under air revealed significant ILT (microm) differences: IBO (4) < AQB (8) < PLP (12) < OUB (23). Upon curing in nitrogen atmosphere, no inhibition occurred with AQB, IBO, and PLP, and < 3 microm for OUB. SBSs on enamel after 10 min or 24 h did not differ according to curing atmospheres (p > 0.05). On dentin, SBSs were higher after curing under N2 (p < 0.05). Irrespective of the curing atmosphere, marginal adaptation was good for AQB and IBO and poor for PLP; OUB revealed significantly smaller gaps under N2 than under air curing. CONCLUSION: Oxygen inhibition of the four self-etching adhesives investigated had no or only moderate effects on bonding efficacy to enamel and dentin.     

Posttraumatic mandibular deformities

In covering the Emergency Department, the Plastic Surgeon can be faced with the mandibular fracture patient. Although the timely repair of the fracture usually leads to normal function and appearance, occasionally the surgeon is faced with the untoward sequelae of the mandible fracture. Post-traumatic mandibular deformities include non-union, malunion, malocclusion, TMJ dysfuction, and facial asymmetry. The difficulty in treatment of these deformities can be compounded by edentulous mandibles, substance abuse, and approach controversies such as the timing of the repair and surgical versus non-surgical management. Knowledge of the post-traumatic mandibular deformities by the treating physician not only assists in their management but may also allow for their prevention.     

Effect of a peripheral NMDA receptor antagonist on glutamate-evoked masseter muscle pain and mechanical sensitization in women

AIMS: To test the hypothesis that local injection of the N-methyl-D-aspartate (NMDA) receptor antagonist ketamine would significantly attenuate glutamate-evoked masseter mechanical sensitization and muscle pain in healthy young women either taking oral contraceptives (W+OC) or not taking oral contraceptives (W-OC). METHODS: Experimental pain was evoked in 47 healthy female subjects (W+OC, n=25; W-OC, n=22) by 2 injections of glutamate (0.2 mL, 1 mol/L) into the masseter muscle. A first injection of glutamate alone was followed by a second injection, 35 minutes later, of glutamate combined with ketamine (0, 1, or 10 mmol/L). Evoked pain intensity was scored on a 10-cm electronic visual analog scale (VAS). Distribution of perceived pain was drawn on a lateral view of the face (pain drawing). Masseter muscle pressure pain thresholds (PPT) and pressure-pain tolerances (PPTOL) were determined bilaterally before and at regular time intervals after injections. Analyses of variance (ANOVA) were used to test the data. RESULTS: There were no main effects of ketamine on any of the VAS pain parameters or on the pain drawing (ANOVAs: P > .055). Furthermore, there were no differences in PPT, PPTOL, VAS peak pain, duration, overall VAS pain, or pain drawing when W-OC were compared with W+OC (ANOVAs: P > .087). Repeated injection of glutamate alone significantly decreased PPT and PPTOL (ANOVAs: P < .001); however, this effect was not significantly attenuated by ketamine. CONCLUSIONS: Peripherally administered ketamine had no effect on glutamate-evoked masseter muscle pain and sensitization in healthy young women, which contrasts with recent observations in healthy young men. Further studies will be needed to reveal the mechanisms that underlie this apparent sex-related difference in ketamine-mediated analgesia.     

Prosthetic laboratory influence on the vertical misfit at the implant/UCLA abutment interface

An inadequate fit at the abutment/implant interface can generate mechanical and biological problems. The laboratorial stages could induce misfit in such interface when the castable UCLA abutment type is used. The purpose of this study was to comparatively evaluate the performance of three prosthetic laboratories (Labs A, B and C) by vertical fit analysis of castable UCLA abutments on the casting and soldering stages of the same prosthesis. Four fixed prostheses were built by each laboratory using castable UCLA abutments. The evaluation was made by scanning electron microscopy under 500x magnification in the mesial and distal regions of each element of the prosthesis, totalizing 24 measurements per laboratory. The results were analyzed statistically by Kruskal-Wallis test (p<0.05). In the casting process, the values presented by the laboratories differed significantly to each other (p=0.004). After soldering, the values presented by the laboratories showed no significant difference (p=0.948). It may be concluded that the fit values obtained in the casting stage of UCLA abutments can be influenced when processed by different laboratories, and that conventional soldering itself increased the degree of framework misfit, regardless of which laboratory made it.