Mental health and the timing of Men’s retirement

BACKGROUND: Analysis of the Psychiatric Morbidity Survey of Great Britain showed that the prevalence of common mental disorders was lower amongst men at or above Britain's state pension age of 65, relative to younger men. Retirees below this age had consistently higher rates of mental disorders than working men. In contrast, the low prevalence of mental disorders amongst retirees aged 65 and older was similar to that of their working peers. The aim of this analysis was to investigate this pattern of results in a national sample of Australian men, and the mediating role of socio-demographic factors. METHOD: Data were from the Household, Income and Labour Dynamics (HILDA) in Australia survey (2003). The analyses included men aged 45-74 years who were active in the labour force (n = 1309), or retired (n = 635). Mental health was assessed using the mental health scale from the Short-Form 36 Health Questionnaire. RESULTS: Retirees were more likely to have mental health problems than their working peers, however this difference was progressively smaller across age groups. For retirees above, though not below, the age of 55 this difference was explained by poorer physical functioning. When age at retirement was considered it was found that early retirees who were now at or approaching the conventional retirement age did not display the substantially elevated rates of mental health problems seen in their younger counterparts. Further, men who had retired at age 60 or older did not display an initially elevated rate of mental health problems. CONCLUSIONS: The association between retirement and mental health varies across older adulthood. Retired British and Australian men below the conventional retirement age of 65 are more likely to have mental health problems relative to their working peers, and retirees above this age. However, poor mental health appears to be linked to being retired below this age rather than an enduring characteristic of those who retire early.     

Modified French-window thoracotomy for exposure of the anterior thoracic spine

Due to the limited exposure, technical challenges, and postoperative pain of thoracic spine surgery, open thoracotomy and video-assisted thoracic surgery (VATS) are associated with significant morbidity and mortality. The modified French-window thoracotomy approach with the aid of a thoracoscope is a useful technique for approaching diseases of the anterior spinal. This approach allows for specific exposure of the spine with a reduction in postoperative pain, morbidity, and mortality and avoids the limitations of VATS.     

The induction of macrophage hemeoxygenase-1 is protective during acute kidney injury in aging mice

Aging is thought to be associated with a higher susceptibility to renal ischemia-reperfusion injury (IRI). To study whether defective induction of hemeoxygenase-1 (HO-1, a protective and anti-inflammatory enzyme) might contribute to this, we found that while 12-month-old mice had similar baseline renal function and HO-1 expression, the induction of HO-1 usually seen in ischemia-reperfusion was reduced. This was also associated with worsened renal function and acute tubular necrosis in the aged compared with young mice. In the older mice, heme arginate (HA) induced HO-1 in the cortex and medulla, significantly improved renal function, and reduced tissue injury. Cellular HO-1 induction in the medulla in response to injury or HA treatment was found to be interstitial rather than epithelial, as evidenced by its colocalization with macrophage markers. In vitro, HA treatment of primary macrophages resulted in marked HO-1 induction without impairment of classical activation pathways. Macrophage depletion, caused by diphtheria toxin treatment of 12-month-old CD11b-DTR transgenic animals, resulted in the loss of interstitial HO-1-positive cells and reversal of the protective phenotype of HA treatment. Thus, failure of HO-1 induction following renal IRI worsens structural and functional injury in older mice and represents a therapeutic target in the elderly. Hence, HO-1-positive renal macrophages mediate HA-induced protection in IRI.     

Defining the Origins of the Iliofemoral, Ischiofemoral, and Pubofemoral Ligaments of the Hip Capsuloligamentous Complex Utilizing Computer Navigation

Purpose  

To use computer navigation software to investigate the specific origins of the hip capsuloligamentous complex.     

Posterior Capsular Rupture Causing Posterior Shoulder Instability: A Case Report

We report the case of a 20-year-old male competitive football player who was treated for a midsubstance posterior capsule rupture after a posterior dislocation from falling onto his shoulder. Conservative management for 5 months after the injury failed to improve his subjective symptoms, with the primary symptom being activity-related posterior shoulder pain. Advanced imaging findings and physical examination were consistent with posterior instability, thought to be due to a posterior labral tear. At the time of a diagnostic arthroscopy, the patient was found to have an oval-shaped rupture of the capsule that was neither a reverse humeral avulsion of the glenohumeral ligament lesion nor a posterior labral tear. The capsular tear was repaired through an all-arthroscopic technique with nonabsorbable sutures. The patient returned to his previous competitive function, had no pain, and had full motion at final follow-up without recurrence of instability or pain symptoms.     

Radiographic analysis of a hand-held surgical navigation system for tibial resection in total knee arthroplasty

Tibial intramedullary or extramedullary alignment guides have not been shown to be highly accurate in performing the tibial resection in total knee arthroplasty (TKA). Since May 2010, a total of 42 knees underwent a TKA using a hand-held, accelerometer-based surgical navigation system for performing the tibial resection (KneeAlign; OrthAlign Inc, Aliso Viejo, Calif). Postoperative standing anteroposterior hip-to-ankle and lateral knee-to-ankle radiographs demonstrated that 97.6% of the tibial components were placed within 90° ± 2° to the mechanical axis in the coronal plane, and 96.2% of the components were placed within 3° ± 2° to the mechanical axis in the sagittal plane. The KneeAlign greatly improves the accuracy of tibial component alignment in TKA.     

Why large-head metal-on-metal hip replacements are painful: the anatomical basis of psoas impingement on the femoral head-neck junction

Large-head metal-on-metal total hip replacement has a failure rate of almost 8% at five years, three times the revision rate of conventional hip replacement. Unexplained pain remains a feature of this type of arthroplasty. All designs of the femoral component of large-head metal-on-metal total hip replacements share a unique characteristic: a subtended angle of 120° defining the proportion of a sphere that the head represents. Using MRI, we measured the contact area of the iliopsoas tendon on the femoral head in sagittal reconstruction of 20 hips of patients with symptomatic femoroacetabular impingement. We also measured the articular extent of the femoral head on 40 normal hips and ten with cam-type deformities. Finally, we performed virtual hip resurfacing on normal and cam-type hips, avoiding overhang of the metal rim inferomedially. The articular surface of the femoral head has a subtended angle of 120° anteriorly and posteriorly, but only 100° medially. Virtual surgery in a normally shaped femoral head showed a 20° skirt of metal protruding medially where iliopsoas articulates. The excessive extent of the large-diameter femoral components may cause iliopsoas impingement independently of the acetabular component. This may be the cause of postoperative pain with these implants.     

The effect of a picture archiving and communication system (PACS) on patient radiation doses for examination of the lateral lumbar spine

This study was conducted to determine whether the doses for the radiographic examination of the lateral lumbar spine changed as a result of the introduction of a hospital-wide picture archiving and communication system (PACS). Doses were measured by thermoluminescent dosimeters (TLD) and dose-area product (DAP) meter readings for 100 patient examinations using a 300-speed conventional film/screen system and for 96 patient examinations when PACS was fully operational. Radiographic technique, exposure factors and patient characteristics were noted and effective doses were calculated, and a comparison was made of all variables. No significant differences between conventional and PACS working were found in surface entry and effective doses for single views of the lateral lumbar spine, but there was a 20% reduction in DAP readings with PACS. However, when summed doses for all images, including rejects, required to demonstrate the lateral lumbar spine for each patient were compared, PACS was found to be associated with significantly lower surface entry (TLD) dose, DAP reading and effective dose (28%, 36% and 16%, respectively) than conventional film. For single images of L1-5, when PACS was in use, there was a significant reduction in the DAP readings and increases in the area of the film/plate irradiated, the focus-to-skin distance and the focus-to-film distance. In addition, significantly fewer lumbosacral junction views were undertaken when PACS was in use. Since many confounding factors may have influenced the results over the period of dose measurement, regression models were used to determine the significance of PACS. These models showed that the use of PACS was not significant in causing any differences in the dose for single images as compared with when film was used, but was significant in the resulting total dose reductions for the examinations.     

Screw orientation and plate type (variable- vs. fixed-angle) effect strength of fixation for in vitro biomechanical testing of the Synthes CSLP

BACKGROUND CONTEXT: Two common justifications for orienting cervical screws in an angled direction are to increase pullout strength and to allow use of longer screws. This concept is widely taught and has guided implant design. Fixed- versus variable-angle systems may offer strength advantages. Despite these teachings, there is a paucity of supporting biomechanical evidence. The purpose of our study is to test the influence of screw orientation and plate design on the maximum screw pullout force. PURPOSE: This study evaluates the effect of screw orientation and plate type (fixed- vs. variable-angle) on screw pullout strength. STUDY DESIGN: Anterior cervical plates of both a fixed- and variable-angle CSLP, were tested for peak pullout strength in a direct plate pullout model using polyurethane foam bone, which models osteoporotic bone. METHODS: Self-tapping, locking screws (4.0x14mm and 4.0x16mm) were used. Screws were oriented in the fixed-angle plate in the standard fashion. In the variable plate, screws were instrumented in three different orientations. Biomechanical testing was performed on an Instron DynaMight 8841 servohydraulic testing machine, measuring maximum pullout force under a displacement-controlled pullout rate of 1mm/min. Five samples were tested per group. RESULTS: When all screws were placed 90 degrees to the plate, there was a significantly increased peak pullout strength (412.8+/-22.2N) compared with when all screws were placed 12 degrees "up and in" (376.2+/-24.3N, p less than or equal to .03). When the 90 degrees construct was reproduced using 14-mm screws and compared with 16-mm screws oriented 12 degrees "all up and in," there was still significantly higher pullout strength with the all 90 degrees construct (434.2+/-28.7N vs. 376.2+/-24.3N, p less than or equal to .009). The fixed-angle plate had a significantly decreased peak pullout strength (288.2+/-15.7N) compared with the variable-angle plate (416.6+/-12.6N) (p less than .00001) when the screws were placed in the same orientation. Overall, the variable-angle plate, regardless of the orientation of screws, had a significantly greater pullout strength than the fixed-angle plate (p less than .001). CONCLUSIONS: In this system, a variable-angle plate has greater pullout strength than a fixed-angle plate, regardless of the orientation of screws. With the variable-angle plate, a construct of all screws 12 degrees "up and in" is the weakest configuration. We found that with the 90 degrees construct, both 16- and 14-mm screws performed significantly better than 16-mm convergent screws. These findings are remarkable because they contradict the current doctrine. This may be a function of plate-dependent factors and should not be applied universally to all plate systems. Further study of screw orientation in additional plating systems is warranted.     

Prevention of spinal cord ischaemia during descending thoracic and thoracoabdominal aortic surgery.

Surgery of the descending and thoracoabdominal aorta has been associated with post-operative paraparesis or paraplegia. Different strategies, which can be operative or non-operative, have been developed to minimise the incidence of neurological complications after aortic surgery. This review serves to summarise the current practice of spinal cord protection during surgery of the descending thoracoabdominal aortic surgery. The pathophysiology of spinal cord ischaemia will also be explained. The incidence of spinal cord ischaemia and subsequent neurological complications was associated with (1) the duration and severity of ischaemia, (2) failure to establish spinal cord supply and (3) reperfusion injury. The blood supply of the spinal cord has been extensively studied and the significance of the artery of Adamkiewicz (ASA) being recognised. This helps us to understand the pathophysiology of spinal cord ischaemia during descending and thoracoabdominal aortic operation. Techniques of monitoring of spinal cord function using evoked potential have been developed. Preoperative identification of ASA facilitates the identification of critical intercostal vessels for reimplantation, resulting in re-establishment of spinal cord blood flow. Different surgical techniques have been developed to reduce the duration of ischaemia and this includes the latest transluminal techniques. Severity of ischaemia can be minimised by the use of CSF drainage, hypothermia, partial bypass and the use of adjunctive pharmacological therapy. Reperfusion injury can be reduced with the use of anti-oxidant therapy. The aetiology of neurological complications after descending and thoracoabdominal aortic surgery has been well described and attempts have been made to minimise this incidence based on our knowledge of the pathophysiology of spinal cord ischaemia. However, our understanding of the development and prevention of these complications require further investigation in the clinical setting before surgery on descending and thoracoabdominal aorta to be performed with negligible occurrence of these disabling neurological problems.