Thresholding Methods for Reduction in Data Processing Errors in the Laser-Textured Surface Topography Measurements

There are many factors influencing the accuracy of surface topography measurement results: one of them is the vibrations caused by the high-frequency noise occurrence. It is extremely difficult to extract results defined as noise from the real measured data, especially the application of various methods requiring skilled users and, additionally, the improper use of software may cause errors in the data processing. Accordingly, various thresholding methods for the minimization of errors in the raw surface topography data processing were proposed and compared with commonly used (available in the commercial software) techniques. Applied procedures were used for the minimization of errors in the surface topography parameters (from ISO 25178 standard) calculation after the removal and reduction, respectively, of the high-frequency noise (S-filter). Methods were applied for analysis of the laser-textured surfaces with a comparison of many regular methods, proposed previously in the commercial measuring equipment. It was found that the application of commonly used algorithms can be suitable for the processing of the measured data when selected procedures are provided. Moreover, errors in both the measurement process and the data processing can be reduced when thresholding methods support regular algorithms and procedures. From applied, commonly used methods (regular Gaussian regression filter, robust Gaussian regression filter, spline filter and fast Fourier transform filter), the most encouraging results were obtained for high-frequency noise reduction in laser-textured details when the fast Fourier transform filter was supported by a thresholding approach.     

Modelling of the Flow in the Process of Washing Out Automotive Catalyst Carriers with the PbLi Alloy

The process of platinum recovery from used car catalysts is highly desirable for both economic and environmental reasons. From the many available methods of processing used car catalysts, the article conducted both numerical and experimental studies using a device based on the collector metal method with lead as a modified medium through a magnetohydrodynamic pump for washing platinum from the channels of the ceramic catalyst carrier. It was assumed that lead alloys with the addition of lithium increase the extraction of platinum from thin catalytic layers and accelerate the platinum dissolution reaction in the Pb-Li alloy, which is the result of a greater affinity of lithium for platinum compared to lead. This assumption was verified by numerical simulations as well as laboratory tests. Tests were carried out for the secondary supply voltage range between 40 and 60 V and the catalyst flushing time between 240 and 480 s. Graphical results of the research were discussed.     

Antibacterial and Biodegradable Polysaccharide-Based Films for Food Packaging Applications: Comparative Study

One of the major objectives of food industry is to develop low-cost biodegradable food packaging films with optimal physicochemical properties, allowing for their large-scale production and providing a variety of applications. To meet the expectations of food industry, we have fabricated a series of solution-cast films based on common biodegradable polysaccharides (starch, chitosan and alginate) to be used in food packaging applications. Selected biopolymers were modified by the addition of glycerol and oxidized sucrose (starch), glycerol (chitosan), and glycerol and calcium chloride (alginate), as well as being used to form blends (starch/chitosan and starch/alginate, respectively). A chestnut extract was used to provide antibacterial properties to the preformed materials. The results of our studies showed that each modification reduced the hydrophilic nature of the polymers, making them more suitable for food packaging applications. In addition, all films exhibited much higher barrier properties to oxygen and carbon dioxide than commercially available films, such as polylactic acid, as well as exhibiting antimicrobial properties against model Gram-negative and Gram-positive bacteria (Escherichia coli and Staphylococcus epidermidis, respectively), as well as yeast (Candida albicans).     

Possibility to Use Short Sawn Timber in the Production of Glued Laminated Beams

Numerous studies have shown that the geometry of micro-joints significantly affects the strength of the so joined timber element. The bending strength increases by creating a larger bonding area by increasing the length of the wedge joint. Although this type of joint has been successfully used for many years, it can still be troublesome to make. For these reasons, the present study investigated an easy-to-fabricate wedge joint, which we folded during the beams’ formation and glued with the same adhesive as the individual lamellas. Although the research has not fully answered all the questions relevant to both scientific and technological curiosity, it indicates the great potential of this solution. Following the principle adopted in the ongoing wood optimisation work, we concluded that the beams of the target cross-section should be produced, and it should only be possible to cut them to a certain length. In this approach, we only removed defects at critical points for the beam structure and, in this way, up to 30% of the timber processed could be saved or better utilised.     

BCL11B,FLT3, NOTCH1 and FBXW7 mutation status in T-cell acute lymphoblastic leukemia patients

T‐cell acute lymphoblastic leukemia is a heterogeneous malignancy originating from developing lymphocyte precursors likely due to mutations in genes regulating thymocyte differentiation. Here, we characterized mutation status of BCL11B and FLT3 genes, presumably involved in T-ALL, together with FBXW7 and NOTCH1 as known players in T-ALL in 65 pediatric T-cell acute lymphoblastic leukemia patients. We also aimed at the assessment of prognostic value of NOTCH1 and FBXW7 mutations in ALL-IC BFM 2002 protocol.FLT3 and BCL11B mutations were detected in 3% and 2% of patients, respectively. FBXW7 mutations were observed in 8% of patients, while NOTCH1 was mutated in 40%. No correlation was found between NOTCH1 and FBXW7 mutations and traditionally used clinical factors or molecular features. In total we have detected nine mutations, which have not been previously described by others. Eight of them were found in NOTCH1 and one in BCL11B gene.Observed frequencies of NOTCH1 and FBXW7 are in line with previous reports, thus confirming postulated participation of these two genes in T-ALL pathomechanism. Moreover, we report on mutation frequency of FLT3 and BCL11B, not extensively studied in T-ALL so far. Finally, we suggest a putative role of BLC11B as an oncogene in T-ALL pathogenesis.     

Surgical strategies in the removal of malignant tumors and benign lesions of the anterior skull base

The choice of surgical approaches to the tumors of the anterior skull base is determined by the location, dimensions of such lesions and their relations to the surrounding structures. Furthermore, the need for the reconstruction of the dura and skull base structures has an important influence on the decision about the surgical procedure. Transfacial approaches provide limited exposure, especially when tumors damage the floor of the anterior cranial fossa and involve the frontobasal dura and brain. Transcranial, craniofacial and subcranial approaches in particular may aid a surgeon in the removal of such lesions, and often these surgical procedures are the only beneficial methods. Our study comprised 15 patients. Transcranial approaches were used in ten cases. In five further cases, we adopted craniofacial or subcranial approaches. Total removal of these lesions was possible in 13 cases. Neither important complications nor death after surgery was observed except for two cases (craniofacial/subcranial approach) where the CSF leak and CNS infection were reported. We deem that the transcranial approach creates a good possibility for total removal of anterior skull base tumors, particularly of the benign lesions, and permits reconstruction of the skull base damaged by the tumor. However, in patients with large malignant tumors, the en bloc resection via the combined craniofacial/subcranial approach achieved better outcome.Parts of the materials of this research were presented at the 12th European Congress of Neurosurgery—EANS 2003, 7–12 September, Lisboa, Portugal     

Value of autologous chondrocyte transplantation in experimental cartilage defects reconstruction. Part II: Microscopic analysis of reconstructed cartilage structural integrity and surface regularity]

Experimental and clinical tests proved that cultured, autologous chondrocytes retain their properties and have ability to reconstruct hyaline-like cartilage, which represents chemical composition and biomechanical characteristics similar to normal hyaline cartilage. The aim of this part of the study was microscopic evaluation of repair tissue structural integrity and surface regularity after autologous chondrocyte transplantation. MATERIAL AND METHODS: Repair of partial thickness cartilage defect (ICRS III(o) grade) on distal femur joint surface was evaluated (25 adolescent rabbits). Procedures were performed in two groups: I--autologous chondrocyte transplantation under periosteal flap, II--periosteal graft. Chondrocytes were isolated from the cartilage specimens by enzymatic digestion and cultured in vitro. The follow-up periods were established at 4, 8, 12 weeks. Repair tissue was evaluated microscopically according to modified O'Driscoll scale. RESULTS: In group I, 4 weeks after the procedure surface of the reconstructed tissue was irregular. 8- and 12-week observation found the surface regular and plain, and repair tissue exhibited complete structural integrity. In group II, in all follow-up periods regenerate surface was irregular, there was many fissures and cracks in graft tissue, and in several cases--regenerate disintegration. CONCLUSION: Obtained results indicate, that hyaline-like cartilage reconstructed after autologous chondrocyte transplantation was characterized by regular, plain surface and complete structural integrity.     

Effect of 12-month therapy with omega-3 polyunsaturated acids on glomerular filtration response to dopamine in IgA nephropathy

BACKGROUND: Omega-3 polyunsaturated acids therapy is efficient in primary IgA nephropathy. It is unknown whether doses of omega-3 smaller than those given previously are still effective. The aim of the study was to examine the effect of omega-3 therapy on renal vascular function in relation to proteinuria and urinary excretion of N-acetyl-beta-D-glucosaminidase (NAG). METHODS: 20 IgA patients aged 36.5 +/- 10.77 with creatinine clearance (Cr(cl)) 105.71 +/- 27.3 ml/min and proteinuria 3.31 +/- 2.01 g/24 h were given orally 810 mg EPA and 540 mg DHA daily for 12 months. Before and at the end of the study, 24-hour proteinuria, serum homocysteine, and Cr(cl) were measured. At the same time, renal vascular function was estimated as dopamine-induced glomerular filtration response (DIR). DIR was measured as: two 120-min lasting Cr(cl) (before and during 2 microg/kg b.w./min i.v. dopamine). RESULTS: The results obtained during follow-up were as follows (baseline vs. after therapy): DIR 14.9 +/- 16.4 vs. 30.3 +/- 14.3% (p < 0.01); urine protein 2.31 +/- 2.01 vs. 1.31 +/- 1.37 g/24 h (p < 0.01); (Cr(cl)) 105.71 +/- 27.3 vs. 103.9 +/- 20.9 ml/min (n.s.); NAG 8.3 +/- 1.8 vs. 6.0 +/- 1.2 U/g(creat) (p < 0.01), and homocysteine 16.2 +/- 3.15 vs. 13.8 +/- 2.6 micromol/l (p < 0.05). The only correlation found was linear correlation between basal DIR and DIR change (r = -0.570; p < 0.010) and basal NAG (r = -0.460; p < 0.50). CONCLUSIONS: Omega-3 supplementation is associated with the improvement of both renal vascular function and tubule function.