Coronally positioned flap plus resin-modified glass ionomer restoration for the treatment of gingival recession associated with non-carious cervical lesions: a randomized controlled clinical trial

BACKGROUND: The aim of this randomized clinical trial was to evaluate the treatment of gingival recession associated with non-carious cervical lesions by a coronally advanced flap alone (CAF) or in combination with a resin-modified glass ionomer restoration (CAF+R). METHODS: Nineteen subjects with bilateral Miller Class I buccal gingival recessions associated with non-carious cervical lesions were selected. The recessions were assigned randomly to receive CAF or CAF+R. Bleeding on probing (BOP), probing depth (PD), relative gingival recession (RGR), clinical attachment level (CAL), non-carious cervical lesion height (CLH), and dentin sensitivity (DS) were measured at baseline; 45 days; and 2, 3, and 6 months postoperatively. Keratinized tissue width (KTW) and keratinized tissue thickness (KTT) were measured at baseline and 6 months. The height of the non-carious cervical lesion located on the root and crown were estimated, allowing calculation of root coverage. RESULTS: Both groups showed statistically significant gains in CAL and soft tissue coverage. The differences between groups were not statistically significant for BOP, PD, RGR, CAL, KTW, and KTT after 6 months. The percentages of CLH covered were 56.14% +/- 11.74% for CAF+R and 59.78% +/- 11.11% for CAF (P >0.05). The root and crown surfaces affected by the non-carious cervical lesion were 1.67 +/- 0.31 mm and 0.96 +/- 0.29 mm, respectively, for CAF+R and 1.59 +/- 0.37 mm and 1.01 +/- 0.33 mm, respectively, for CAF. The estimated root coverage was 88.02% +/- 19.45% for CAF+R and 97.48% +/- 15.36% for CAF (P >0.05). CAF+R reduced DS significantly compared to CAF (P <0.05). CONCLUSIONS: Both procedures provided similar soft tissue coverage after 6 months. Despite the fact that a greater reduction in DS was observed after CAF+R, longitudinal observations are necessary to confirm these results.     

Influence of nicotine administration on different implant surfaces: a histometric study in rabbits

BACKGROUND: This study investigated the influence of implant surface on osseointegration around titanium implants inserted in the tibiae of rabbits administered with nicotine. METHODS: Thirty-two (32) New Zealand rabbits were included in the study. After anesthesia, the tibia surface was exposed and 2 screw-shaped commercially available pure titanium implants 7.0 mm in length and 3.75 mm in diameter were placed bilaterally. A total of 128 implants were inserted: 64 blasted with Al2O3 particles (Group 1) and 64 with a machined surface finish (Group 2). The animals were randomly assigned to 1 of 4 treatment subgroups, and daily subcutaneous injections of nicotine were administered: A) saline solution; B) 0.37 mg/kg; C) 0.57 mg/kg; and D) 0.93 mg/kg. In order to label regenerated bone, a 2% calcein green solution was administered by intramuscular injection at 0, 7, and 15 days after implant insertion. After 42 days, the animals were sacrificed and undecalcified sections were prepared. The degree of bone contact with the implant surface, the bone area, and the intensity of bone labeling were measured into the limits of the implant threads. RESULTS: Statistical analysis (2-way ANOVA) revealed no significant difference regarding the effect of nicotine on bone healing around the implants (P>0.05). However, a significant influence of the implant surface on the degree of bone-to-implant contact was detected in groups C (30.13 +/- 4.97 and 37.85 +/- 8.85, for machined and Al2O3-blasted surfaces, respectively) and D (27.79 +/- 3.93 and 33.13 +/- 8.87, for machined and Al2O3-blasted surfaces, respectively) (P<0.05). CONCLUSIONS: Although nicotine administration may not statistically influence bone healing around titanium implants, implant surface design may enhance osseointegration after nicotine administration.     

EFFECT OF CAST RECTIFIERS ON THE MARGINAL FIT OF UCLA ABUTMENTS

Objectives:

This study assessed the effect of cast rectifiers on the marginal misfit of cast UCLA abutments compared to premachined UCLA abutments. The influence of casting and porcelain baking on the marginal misfit of these components was also investigated.

Methods:

Two groups were analyzed: test group – 10 cast UCLA abutments, finished with cast rectifier and submitted to ceramic application; control group – 10 premachined UCLA abutments, cast with noble metal alloy and submitted to ceramic application. Vertical misfit measurements were performed under light microscopy. In the test group, measurements were performed before and after the use of cast rectifiers, and after ceramic application. In the control group, measurements were performed before and after casting, and after ceramic application. Data were submitted to statistical analysis by ANOVA and Tukey''s test (α= 5%).

Results:

The use of cast rectifiers significantly reduced the marginal misfit of cast UCLA abutments (from 25.68μm to 14.83μm; p<0.05). After ceramic application, the rectified cylinders presented misfit values (16.18μm) similar to those of premachined components (14.3 μm). Casting of the premachined UCLA abutments altered the marginal misfit of these components (from 9.63 μm to 14.6 μm; p<0.05). There were no significant changes after porcelain baking, in both groups.

Conclusion:

The use of cast rectifiers reduced the vertical misfit of cast UCLA abutments. Even with carefully performed laboratory steps, changes at the implant interface of premachined UCLA abutments occurred. Ceramic application did not alter the marginal misfit values of UCLA abutments.     

Bone density around titanium implants may be influenced by intermittent cigarette smoke inhalation: a histometric study in rats

PURPOSE: This study investigated the influence of cigarette smoke on bone healing around titanium implants placed in rats. MATERIALS AND METHODS: After administration of anesthesia, the tibia surface was exposed and screw-shaped titanium implants (4.0 mm in length and 2.2 mm in diameter) were placed bilaterally (1 each side). The animals (n = 32) were randomly assigned to either group 1 (control, n = 18) or group 2 (intermittent cigarette smoke inhalation, n = 14). After 60 days, the animals were sacrificed and undecalcified sections obtained. Bone density (the proportion of mineralized bone in a 500-microm-wide zone lateral to the implant) was measured in the cortical (zone A) and cancellous bone (zone B) areas. RESULTS: In zone A, a slight difference in bone density was noted between the groups (96.18% +/- 1.08% and 95.38 +/- 1.17% in groups 1 and 2, respectively; P > .05) but was not statistically significant. In contrast, bone density was significantly decreased in zone B in the animals that were exposed to cigarette smoke (17.57 +/- 6.45% and 11.30 +/- 6.81% for groups 1 and 2, respectively; P < .05). DISCUSSION: Whether different results would be observed if animals were exposed to cigarette smoke for a longer period of time and/or before implant placement remains to be investigated. CONCLUSION: Although intermittent cigarette smoke exposure may not seriously affect cortical bone density, it may jeopardize bone quality around titanium implants in the cancellous bone area.     

An expedited technique for remaking a single complete denture for an edentulous patient

Traditional techniques for fabricating complete dentures commonly require 5 visits. Reduction of the number of visits and chair time for complete denture fabrication would be welcomed by dentists and patients. This article describes and illustrates clinical and laboratory procedures for fabricating a new denture for a patient with an existing complete denture. The procedure can be completed in 3 to 4 visits.     

Tissue destruction in periodontitis: bacteria or cytokines fault?

The pathogenesis of periodontal disease involves the sequential activation of a great variety of components of the host immune response, primarily acting to defend periodontal tissues against bacterial aggression, but also functioning as mediators of tissue destruction. The expression of the disease results from the interaction of host, microbiological agents, and environmental factors. Leukocytes play a critical role in the pathogenesis of the disease, producing different cytokines, chemokines, and other mediators, thus generating a host defense response, as well as inducing tissue inflammation and bone destruction. The aim of this review is to address the role of some inflammatory mediators in response to bacterial aggression in periodontitis.     

In vitro evaluation of microleakage of different materials used as pit-and-fissure sealants

The aim of this study was to evaluate in vitro the marginal microleakage of different materials used as pit-and-fissure sealants (Delton, Filtek Flow, Dyract Flow and Vitremer). Fifty-six extracted sound human third molars were randomly assigned to 4 groups (n=14). After sealant placement, the teeth were thermocycled (500 cycles; 5 degrees C, 37 degrees C and 55 degrees C), isolated, immersed in 2% buffered methylene blue dye for 4 h, included in acrylic resin and sectioned longitudinally in a buccolingual direction. The sections were analyzed for leakage using an stereomicroscope. A 4-criteria ranked scale was used to score dye penetration. All materials exhibited dye penetration to some extension and no statistically significant difference was observed among the groups (p>0.05). In conclusion, the findings of this study showed that a flowable composite resin, a flowable compomer and resin-modified glass ionomer placed on occlusal pits and fissures had similar marginal sealing as the unfilled self-cured resin-based sealant.     

Maxillary sinus augmentation using an engineered porous hydroxyapatite: a clinical, histological, and transmission electron microscopy study in man

Porous hydroxyapatite (HA) is a calcium-phosphate-based material that is biocompatible, nonimmunological, and osteoconductive, and has a macroporosity of about 200 to 800 microm. The pores seem to be able to induce migration, adhesion, and proliferation of osteoblasts inside the pore network and to promote angiogenesis inside the pore system. The aim of this study was to evaluate the clinical behavior and the histological and ultrastructural aspects of porous HA in maxillary sinus augmentation procedures. Twenty-four patients (19 men, 5 women; average age 53.4 years) in good general physical and mental health and with partially or completely edentulous maxillae were selected for this study. Six months after sinus floor elevation, at the time of dental implant placement, biopsies were carried out under local anesthesia. These bone cores were cut in half and were processed for light and transmission electron microscopy. After a mean 3 years after implantation, all implants are clinically in function and no surgical or prosthetic complications have occurred. Under light microscopy, newly formed bone was 38.5% +/- 4.5%, whereas the residual biomaterial represented 12% +/- 2.3% and the marrow spaces represented 44.6% +/- 4.2%. In addition, in the majority of cases, the biomaterial particles were in close contact with the bone, which appeared compact with the characteristic features of well-organized lamellar bone. A cement-like line was slightly visible at the bone-biomaterial interface, but there were no gaps or interposed connective tissue in between. A high quantity (about 40%) of newly formed bone was present. Bone was closely apposed to the biomaterials particles as shown in light microscopy and transmission electron microscopy. Moreover, no signs of inflammatory cell infiltrate or foreign body reaction were present. Also, most of the biomaterial was resorbed and only a small quantity (a little more than 10%) was still present. The results of our study show that porous HA can be a suitable synthetic material for bone regeneration in maxillary sinus augmentation procedures.