Tissue destruction in periodontitis: bacteria or cytokines fault?

The pathogenesis of periodontal disease involves the sequential activation of a great variety of components of the host immune response, primarily acting to defend periodontal tissues against bacterial aggression, but also functioning as mediators of tissue destruction. The expression of the disease results from the interaction of host, microbiological agents, and environmental factors. Leukocytes play a critical role in the pathogenesis of the disease, producing different cytokines, chemokines, and other mediators, thus generating a host defense response, as well as inducing tissue inflammation and bone destruction. The aim of this review is to address the role of some inflammatory mediators in response to bacterial aggression in periodontitis.     

In vitro evaluation of microleakage of different materials used as pit-and-fissure sealants

The aim of this study was to evaluate in vitro the marginal microleakage of different materials used as pit-and-fissure sealants (Delton, Filtek Flow, Dyract Flow and Vitremer). Fifty-six extracted sound human third molars were randomly assigned to 4 groups (n=14). After sealant placement, the teeth were thermocycled (500 cycles; 5 degrees C, 37 degrees C and 55 degrees C), isolated, immersed in 2% buffered methylene blue dye for 4 h, included in acrylic resin and sectioned longitudinally in a buccolingual direction. The sections were analyzed for leakage using an stereomicroscope. A 4-criteria ranked scale was used to score dye penetration. All materials exhibited dye penetration to some extension and no statistically significant difference was observed among the groups (p>0.05). In conclusion, the findings of this study showed that a flowable composite resin, a flowable compomer and resin-modified glass ionomer placed on occlusal pits and fissures had similar marginal sealing as the unfilled self-cured resin-based sealant.     

Maxillary sinus augmentation using an engineered porous hydroxyapatite: a clinical, histological, and transmission electron microscopy study in man

Porous hydroxyapatite (HA) is a calcium-phosphate-based material that is biocompatible, nonimmunological, and osteoconductive, and has a macroporosity of about 200 to 800 microm. The pores seem to be able to induce migration, adhesion, and proliferation of osteoblasts inside the pore network and to promote angiogenesis inside the pore system. The aim of this study was to evaluate the clinical behavior and the histological and ultrastructural aspects of porous HA in maxillary sinus augmentation procedures. Twenty-four patients (19 men, 5 women; average age 53.4 years) in good general physical and mental health and with partially or completely edentulous maxillae were selected for this study. Six months after sinus floor elevation, at the time of dental implant placement, biopsies were carried out under local anesthesia. These bone cores were cut in half and were processed for light and transmission electron microscopy. After a mean 3 years after implantation, all implants are clinically in function and no surgical or prosthetic complications have occurred. Under light microscopy, newly formed bone was 38.5% +/- 4.5%, whereas the residual biomaterial represented 12% +/- 2.3% and the marrow spaces represented 44.6% +/- 4.2%. In addition, in the majority of cases, the biomaterial particles were in close contact with the bone, which appeared compact with the characteristic features of well-organized lamellar bone. A cement-like line was slightly visible at the bone-biomaterial interface, but there were no gaps or interposed connective tissue in between. A high quantity (about 40%) of newly formed bone was present. Bone was closely apposed to the biomaterials particles as shown in light microscopy and transmission electron microscopy. Moreover, no signs of inflammatory cell infiltrate or foreign body reaction were present. Also, most of the biomaterial was resorbed and only a small quantity (a little more than 10%) was still present. The results of our study show that porous HA can be a suitable synthetic material for bone regeneration in maxillary sinus augmentation procedures.     

Clinical and metabolic changes after conventional treatment of type 2 diabetic patients with chronic periodontitis

BACKGROUND: The aim of this study was to compare the response to conventional periodontal treatment between patients with or without type 2 diabetes mellitus from a clinical and metabolic standpoint. METHODS: A prospective, parallel, comparative longitudinal clinical study was performed between type 2 diabetics and non-diabetics with moderate generalized chronic periodontitis. The study period was 6 months. Conventional periodontal scaling and root planing were performed, and the response to this treatment was compared between the groups at 3 and 6 months, measuring the plaque index, bleeding on probing, probing depth, level of clinical attachment, and gingival recession. In the diabetic patients, the clinical response was related to measurements of HbA1c and glucose in blood at 3 and 6 months. RESULTS: An improvement in all clinical variables was observed, with no statistically significant differences between the groups, with the exception of probing depth (P <0.0207). The improvement observed in blood HbA1c levels confirmed a positive metabolic response to periodontal treatment, with a lower value for this variable at each measurement time. CONCLUSIONS: Both groups of patients showed a clinical improvement after basic non-surgical periodontal treatment. The diabetic patients showed improved metabolic control (lower HbA1c) at 3 and 6 months after periodontal treatment.     

A preliminary protocol for multi-professional centers for the determination of signs and symptoms of temporomandibular disorders

The objective of the present study was to test a protocol for the quantification of the frequency and severity of signs and symptoms of temporomandibular disorders (TMD) according to patient perception during two phases of investigation. The protocol was developed based on the signs and symptoms most frequently reported in the literature and on the circumstances in which they produce discomfort. Eighty-four patients diagnosed with TMD by functional examination of the masticatory system responded to the protocol questions and indicated the severity of signs and symptoms using an eleven point numerical scale (Phase 1). Forty-two patients were fitted with an occlusal splint (treated group) and the remaining participants did not use a splint (control group). The protocol questions were asked after 50 days of treatment (Phase 2). Based on the results of nonparametric statistical analysis, the incidence of signs and symptoms was high in Phase 1 and significant, with no difference between the groups, whereas the treated and control groups differed in Phase 2. A comparison between Phases 1 and 2 showed that only the treated group presented a reduction in the severity of signs and symptoms. The study showed that using this protocol, it is possible to define the frequency and severity of symptoms as well as the effect of the treatment. The advantage of this protocol is that it would complement the data obtained using clinical examination with information provided by the patient in a measurable manner.     

Dominant form of arthrogryposis multiplex congenita with limited mouth opening: a clinical and imaging study

AIMS: Arthrogryposis multiplex congenita (AMC) is characterized by congenital contractures and joint deformities, but there are only a few reports of temporomandibular joint (TMJ) involvement. The objective of this investigation was to study the cause of limited mouth movement in this disease. MATERIALS AND METHODS: Four individuals from a family affected by AMC over 5 generations were examined clinically and by magnetic resonance imaging (MRI) and 3-dimensional computerized tomography (3D-CT). RESULTS: The CT scans of the 4 individuals showed hyperplasia of the coronoid process protruding into the infratemporal fossa in 2 of them and cranially to the zygomatic arch in the other 2; the hyperplasia was associated with mechanical limitation of the mouth opening. The MRI showed a disc displacement with reduction in 1 patient and a disc displacement without reduction in another; disc displacement could not be evaluated because of the limited mouth opening in the other 2. The condyle-disc complex of these last 2 individuals could only rotate. The MRI on T2-weighted images showed disc hyposignal in all cases but no alterations in the masticatory muscle tissue. The pedigree of the family suggests an autosomal dominant form of inheritance. CONCLUSIONS: The restriction of mouth opening in the 4 individuals affected by AMC was likely due to osseous dysplasia.     

Light shielding effect of overlaying resin composite on the photopolymerization cure kinetics of a resin composite and a dentin adhesive.

OBJECTIVES: The purpose of this study was to simultaneously determine the impact of exposure times and incremental resin composite overlaying thickness on the cure kinetics of a light activated composite and a dentin adhesive at selected depths of a simulated restoration. METHODS: Levels and kinetics of polymerization of a light activated resin composite (Z250, 3M-ESPE) and dentin adhesive (Excite, Ivoclar) cured with a halogen light unit (Demetron, Kerr, USA) operating at low/medium intensity (500 mW/cm2) for different exposure durations (20 and 60 s) were measured at selected depths (0.3, 0.6 and 1mm) using a modified calorimetric analyzer (DSC 25, METLLER-TOLEDO). RESULTS: Final polymerization levels of materials up to 1mm through the composite are not significantly different while the light shielding effect of incremental resin composite overlaying progressively reduces their reaction rates. SIGNIFICANCE: Prolonged irradiation time at low/medium energies is effective for proper conversion of a resin composite and dentin adhesive; 60 s irradiation time provides the maximum obtainable conversion through the dental resin composite for thicknesses up to 1mm.     

Microtensile bond strength of light- and self-cured adhesive systems to intraradicular dentin using a translucent fiber post

This study evaluated the bond strength of a light- and self-cured adhesive system to different intraradicular dentin areas (cervical, middle and apical thirds). Twenty single-rooted teeth were instrumented and their roots were prepared to receive a #2 translucent fiber post (Light Post). The root canals were irrigated with 0.5% sodium hypochlorite for one minute, rinsed with water and dried using paper tips. The teeth were divided into two groups (n=10): Single Bond [SB] (light-cured) and Scotchbond Multi-Purpose Plus [SBMP] (self-cured). To avoid polymerization of the materials through the root lateral walls, the teeth were placed in a silicone mold and the adhesives applied with a thin microbrush according to manufacturer's instructions. The resin cement, Rely X ARC, was inserted into the root canals using Lentulo burs. The post was then placed and the light-curing procedure was carried out for 40 seconds (+/-500 mW/cm2). The roots were kept in a 100% relative moisture environment for 24 hours and stored in distilled water for an additional 24 hours. Each root was perpendicularly sectioned into 1-mm thick sections, resulting in approximately four slices per region. Dumbbell-shaped slices were obtained by trimming the proximal surfaces of each slice using a diamond bur until it touched the post. The bonded area was calculated, slices were attached to a special device and submitted to microtensile testing at 1 mm/minute crosshead speed. Data were analyzed using ANOVA and Tukey's test. The mean bond strength values (MPa) were: SBMP: cervical=10.8a, middle=7.9b%, apical=7.1bc; SB: cervical=8.1b, middle=6.0c, apical=6.9b. Significant differences were found between adhesive systems only for the cervical third. The cervical region showed higher mean bond strength values than the middle and apical regions (p<0.0001).     

Evaluation of silver methenamine method for nanoleakage

OBJECTIVES: The aim of this study was to evaluate nanoleakage patterns following silver methenamine staining of restorations bonded with a total-etch single bottle system, a self-etching primer system and a total-etch single bottle system after collagen depletion. METHODS: The dentin bonding systems used in this study were Prime and bond 2.1 (PB) and Clearfil SE Bond (CSEB). Cavities were made in grounded labial surfaces of 15 extracted bovine lower incisors, randomly divided into 3 Groups. Group 1 (PB), Group 2 (CSEB) and Group 3 (PB/SH) PB after collagen depletion with sodium hypochlorite (SH). The specimens were restored, sectioned and submitted to silver methenamine staining, polished and observed with low-vacuum back-scattered SEM. One way ANOVA and multiple-comparison Tukey's test were used for statistical analysis of the leakage scores. RESULTS: PB presented significantly greater silver deposition and a distinct pattern when compared to CSEB. No silver deposition was detected for PB after collagen depletion. SIGNIFICANCE: The dentine bonding systems tested were unable to prevent nanoleakage when used according to the manufacturers' instructions; however, CSEB presented a lower level of silver deposition. Collagen depletion prior to PB application may prevent nanoleakage occurrence in dentine walls. Silver methenamine staining may be a useful method for detection of nanoleakage in dentine when the collagen fibrils remain exposed within the hybrid layers.