3D evaluation of composite resin restoration at practical training using swept-source optical coherence tomography (SS-OCT)

Internal adaptation of restorations to the cavity wall is one of the important topics in clinical dentistry. The purpose of this study was to investigate the possibility to utilize the non-invasive tomographic imaging system for teaching the importance of cavity adaptation at dental school pre-clinical training. Swept-source optical coherence tomography (SS-OCT) was used for detection of marginal and internal defects in the composite resin restorations as an educational device. Class 1 and Class 2 composite restorations to melamine resin molar tooth were assigned to the students and prepared during the skill test, and SS-OCT imaging was performed to evaluate students' works. SS-OCT could detect the internal gaps and voids within the restorations in tomography images synthesized based on the backscatter signal from within the restoration. It is suggested that the SS-OCT is promising diagnostic modality, as well as educational imaging device for the detection of internal gaps in adhesive restorations.     

Preparation of Sr-containing carbonate apatite as a bone substitute and its properties

Sr-containing carbonate apatite (SrCAp) specimens of varied Sr contents, ranging from 0 to 13.3 mol%, were prepared through a phosphate treatment of set gypsum-and-carbonate mixture at 100°C for 7 days. Effects of Sr content in SrCAp on microstructure, osteoblast-like cell (MC3T3-E1) attachment and proliferation, and alkaline phosphatase (ALP) activity were evaluated. Sr(2+) ion substituted Ca(2+) ion in the apatite lattice. Carbonate content was about 9-13.6 wt%, increasing in content level as Sr content increased. Sr addition benefited cell attachment but had no significant influence on cell proliferation, although the latter was inhibited at the highest Sr content. ALP activity reached a peak in specimen containing 3.4 mol% of Sr. The present study revealed that SrCAp is a promising candidate for use as a bone substitute material with good resorbabilty and osteoconductivity.     

Morphological categorization of acid-base resistant zones with self-etching primer adhesive systems

This study investigated the influence of the composition of self-etching primer adhesive systems on the morphology of acid-base resistant zones (ABRZs). One-step self-etching primer systems (Clearfil Tri-S Bond, G-Bond, and One-Up Bond F Plus) and two-step self-etching primer systems (Clearfil SE Bond, Clearfil Protect Bond, UniFil Bond, and Mac Bond II) were used in this study. Each adhesive was applied on prepared dentin disk surfaces, and a resin composite was placed between two dentin disks. All resin-bonded specimens were subjected to acid-base challenge. Observation under a scanning electron microscope (SEM) revealed the creation of an ABRZ adjacent to the hybrid layer for all the self-etch primer adhesive systems, even when non-fluoride releasing adhesives were used. The presence of fluoride in two-step self-etching adhesive significantly increased the thickness of ABRZ created. Results suggested that an ABRZ was created with the use of self-etching primer adhesive systems, but its morphology differed between one-and two-step self-etching primer adhesive systems and was influenced by fluoride release activity.     

Interfacial fracture toughness of different resin cements bonded to a lithium disilicate glass ceramic

Objectives

To evaluate the effect of HF acid etching and silane treatment on the interfacial fracture toughness of a self-adhesive and two conventional resin-based cements bonded to a lithium disilicate glass ceramic.

Methods

Lithium disilicate glass ceramic discs were prepared with two different surface preparations consisting of gritblasted with aluminium oxide, and gritblasted and etched with hydrofluoric acid. Ceramic surfaces with a chevron shaped circular hole were treated by an optimized silane treatment followed by an unfilled resin and then three different resin cements (Variolink II, Panavia F2, and Multilink Sprint). Specimens were kept in distilled water at 37 °C for 24 h and then subjected to thermocycling. The interfacial fracture toughness was measured and mode of failures was also examined. Data were analysed using analysis of variance followed by T-test analysis.

Results

No statistically significant difference in the mean fracture toughness values between the gritblasted and gritblasted and etched surfaces for Variolink II resin cement was found (P > 0.05). For the gritblasted ceramic surfaces, no significant difference in the mean fracture toughness values between Panavia F2 and Variolink II was observed (P > 0.05). For the gritblasted and etched ceramic surfaces, a significantly higher fracture toughness for Panavia F2 than the other cements was found (P < 0.05).

Conclusions

The interfacial fracture toughness for the lithium disilicate glass ceramic system was affected by the surface treatment and the type of luting agent. Dual-cured resin cements demonstrated a better bonding efficacy to the lithium disilicate glass ceramic compared to the self-adhesive resin cement.

Clinical significance

The lithium disilicate glass ceramic surfaces should be gritblasted and etched to get the best bond when used with Panavia F2 and Multilink Sprint resin cements, whereas for the Variolink II only gritblasting is required. The best bond overall is achieved with Panavia F2.     

An open-label phase 1 clinical trial of the allogeneic side population adipose-derived mesenchymal stem cells in SMA type 1 patients

Neurological Sciences - Spinal muscular atrophy (SMA), an autosomal recessive neurodegenerative disorder of alpha motor neurons of spinal cord associated with progressive muscle weakness and...     

Evaluation of Onlay Island Flap Technique in Shallow Urethral Plate Hypospadiasis

Background:

Hypospadias is one of the most common congenital genital anomalies in males that necessitates to be operated early in infancy (when 6 to 9 months old). On the other hand, hypospadias is a challenging field of pediatric urology with multiple reconstruction techniques. A perfect hypospadias repair is supposed to return urethral continuity with sufficient caliber, eradicate phallus curvature, and supply an acceptable appearance with low complications.

Objectives:

This study aimed to evaluate the outcomes of using onlay island flap technique in the repair of hypospadias with shallow urethral plate.

Patients and Methods:

In this prospective study within June 2012 to December 2013, we performed onlay island flap procedure to repair hypospadias with shallow urethral plate measuring less than 6 millimeter. This technique was selected for all types of hypospadiasis except subcoronal type. Nesbit’s dorsal plication procedure was established for chordee. In cases with very small glans, urethroplasty was performed without glansplasty.

Results:

Twenty three patients with mean age of 30 (range 10 - 60) months underwent onlay island flap repair; all had a shallow urethral plate < 6 mm, 3 had a very small glans, and 18 had chordee. Meatus was located in distal shaft in 5 cases, mid shaft in 8, proximal in 6 and penoscrotal type in 4 patients. Chordee was corrected with Nesbit’s dorsal plication in 16 cases. Complications were: meatal stenosis in 2 cases and urethrocutaneous fistula in 2 patients, all of which were repaired surgically. Mean follow up time was 13 (3 - 20) months. All cases that had glansplasty have excellent esthetic appearance.

Conclusions:

This technique offers acceptable results regarding meatal stenosis, urethrocutaneous fistula and esthetic outcome.     

Effects of GABAergic inhibition on neocortical long-term potentiation in the chronically prepared rat

In this study we investigated the hypothesis whether P2-related differences tested in a visual priming paradigm are associated with theta phase-locking. We recorded the EEG from 31 electrodes and calculated phase-locking index and total power differences for frequencies between 2 and 20 Hz. ERPs (event-related potentials) were analyzed for P1, N1 and P2 components. P2 showed strongest task-related amplitude differences between congruent and incongruent targets. A source analyses was performed for the P2 component using sLoreta that revealed local generators of the P2 in parieto-occipital regions. Phase-locking analyses showed specific effects in the theta range (4-6 Hz) appearing in time windows at around the P2 component. We draw the conclusion that phase-locked theta reflect top-down regulation processes mediating information between memory systems and is in part involved in the modulation of the P2 component.