Characterization of in vitro metabolites of the aryl hydrocarbon receptor ligand 6-formylindolo[3,2-b]carbazole by liquid chromatography-mass spectrometry and NMR.

The tryptophan photoproduct 6-formylindolo[3,2-b]carbazole (FICZ) exhibits the highest aryl hydrocarbon receptor (AhR) binding affinity reported so far. In different cells, in vitro, both extracts of UV-irradiated tryptophan and the synthesized pure compound FICZ induce a rapid and transient expression of AhR-regulated genes. The transient induction suggests that the biotransformation gene battery induced by AhR activation takes part in a metabolic degradation of the ligand, whereby a low steady-state level is regained. The down-regulation of AhR-regulated gene expression was previously shown to be dependent on cytochrome P450 1A1 (CYP1A1). Metabolism of FICZ generates five major metabolites, which appeared as three peaks (M1-M3) in the high performance liquid chromatography. The aim of the present study was to use rat liver S9 from Aroclor-pretreated rats to produce large enough quantities of FICZ metabolites for structure characterization and to determine their product precursor relationship. NMR analysis of large combined fractions of the metabolites indicated that M3 and M2 contained 2 isomers, respectively. By means of liquid chromatography-mass spectrometry (negative ion electrospray mode) and NMR spectroscopy (by (1)H-NMR, correlation spectroscopy, and nuclear Overhauser effect spectroscopy techniques) five metabolites of FICZ were identified, and their structures were elucidated. The molecular weights of the two M3 isomers were 300 and both M2 and M1 compounds demonstrated molecular weights of 316, corresponding to addition of one (M3) and of two oxygen (M2 and M1), respectively. The structures were assigned as 2- and 8-hydroxy (M3), 2,10- and 4,8-dihydroxy (M2) and 2,8-dihydroxy derivatives of indolo[3,2-b]carbazole-6-carboxaldehyde (6-formylindolo[3,2-b]carbazole).     

Changes over 6-months in health-related quality of life in a matched sample of hispanics and non-hispanics with heart failure

Hispanics are a growing ethnic minority in the United States and one at significant risk for heart failure. Health-related quality of life (HRQL) is poor in individuals with heart failure, especially during and immediately following hospitalization. No prior research into the HRQL of Hispanics with heart failure was located. A sample of 80 individuals with heart failure, evenly divided by primary language and matched on functional status using the New York Heart Association classification system and age, was studied for 6 months following hospital discharge. Data on HRQL were collected using Spanish and English versions of the Minnesota Living with Heart Failure Questionnaire. Scores improved over time in both groups but significantly more so in the Hispanics when compared to the non-Hispanics. Group differences in HRQL could not be explained by demographics, clinical characteristics, treatment received, perceived support, or instrument response characteristics. Further exploration of this naturally occurring phenomenon may provide insight into how HRQL can be improved in the general heart failure population.     

Reoperations with the Right Gastroepiploic Artery without Cardiopulmonary Bypass

A bstract The right gastroepiploic artery (RGEA) has been utilized as the bypass conduit on the inferior surface of the heart with a minimally invasive approach. Fourteen patients had reoperative coronary bypass surgery for severely symptomatic single-vessel disease of the right coronary artery. All surgeries were performed since May 1996. A small mid-line incision including splitting of the lower sternum gave excellent exposure. The inferior surface of the heart was dissected to expose and stabilize the target vessel. The heart rate was controlled with a diltiazem drip. Cardiopulmonary bypass was not necessary in any case. The right coronary artery was bypassed in three patients, the posterior descending artery branch in ten patients, and the terminal circumflex of the left coronary artery in one. After grafting, patency of the anastomosis was demonstrated by Doppler echocardiogram. Two patients had left anterior descending artery (LAD) grafts with LIMA (left mammary artery) and RGEA grafts performed simultaneously with two port access incisions. No patient had perioperative mortality or complications. No patient had recurrent angina. Doppler color echocardiographic imaging studies before discharge confirmed patency of the graft in 13 of 14 cases. In one case, the gastroepiploic artery could not be visualized. Angiographic visualization was positive in seven cases; seven patients were not studied yet. The gastroepiploic artery is an excellent conduit for vascularization of the inferior aspect of the heart. The operation can be done with a minimally invasive technique and without the use of cardiopulmonary bypass. This approach seems especially applicable in selective reoperative cases.     

In vitro evaluation of ablation parameters of normal and fibrous aorta using smooth excimer laser coronary angioplasty

A modified exeimer laser energy delivery system was used to irradiate 100 segments of normal and fibrous aorta in vitro. The laser beam was scanned into 8 fiber bundles consisting of 50 fibers each resulting in a reduction of the applied pulse energy. The total repetition rate was increased to 150 Hz in order to keep the repetition rate per fiber bundle close to 20 Hz and to minimize thermal injury. The results demonstrate that effective ablation (etch rate per 8 pulses > 2.0 μm) occurred at an energy fluency of 50 mJ/mm² in both normal and fibrous aorta. Tissue damage (carbonization, tissue separation, fissures, cracks, and vacuolization) was in a range of 100 ± 28 to 152 ± 30 μm for normal aorta and in a range of 57 ± 35 to 110 ± 39 μm for fibrous aorta. We conclude that effective ablation of normal and fibrous human aorta can be achieved by the application of smooth excimer laser coronary angioplasty. This improvement of excimer laser technology may result in a reduction of shock wave- and cavitation-induced damage leading to a reduction of tissue injury. However, this awaits further in vitro and in vivo confirmation. © 1993 Wiley-Liss, Inc.     

Breast-feeding and mental and motor development at 51/2 years.

OBJECTIVE: Breast-feeding is associated with better child development outcomes, but uncertainty remains primarily due to the close relationship between breast-feeding and socioeconomic status. This study assesses the issue in a low socioeconomic status sample where breast-feeding was close to universal. METHODS: Seven hundred eighty-four Chilean children were followed longitudinally from infancy. All but four were initially breastfed, 40% nursed beyond 12 months, and infant growth was normal. Child development was assessed at 5(1/2) years by a cognitive, language, and motor test battery. The duration of breast-feeding as the sole milk source was analyzed as a continuous variable, adjusting for a comprehensive set of background factors. RESULTS: The relationship between breast-feeding and most 5(1/2)-year developmental outcomes was nonlinear, with poorer outcome for periods of breast-feeding as the sole milk source for <2 months or >8 months--statistically significant for language, motor, and one comprehensive cognitive test, with a suggestive trend for IQ. CONCLUSIONS: The observed nonlinear relationships showed that breast-feeding as the sole milk source for <2 months or >8 months, compared with 2-8 months, was associated with poorer development in this sample. The latter finding requires replication in other samples where long breast-feeding is common and socioeconomic status is relatively homogeneous.     

Fusion and failure following anterior cervical plating with dynamic or rigid plates: 6-months results of a multi-centric, prospective, randomized, controlled study

Anterior cervical plate fixation is an approved surgical technique for cervical spine stabilization in the presence of anterior cervical instability. Rigid plate design with screws rigidly locked to the plate is widely used and is thought to provide a better fixation for the treated spinal segment than a dynamic design in which the screws may slide when the graft is settling. Recent biomechanical studies showed that dynamic anterior plates provide a better graft loading possibly leading to accelerated spinal fusion with a lower incidence of implant complications. This, however, was investigated in vitro and does not necessarily mean to be the case in vivo, as well. Thus, the two major aspects of this study were to compare the speed of bone fusion and the rate of implant complications using either rigid- or dynamic plates. The study design is prospective, randomized, controlled, and multi-centric, having been approved by respective ethic committees of all participating sites. One hundred and thirty-two patients were included in this study and randomly assigned to one of the two groups, both undergoing routine level-1- or level-2 anterior cervical discectomy with autograft fusion receiving either a dynamic plate with screws being locked in ap - position (ABC, Aesculap, Germany), or a rigid plate (CSLP, Synthes, Switzerland). Segmental mobility and implant complications were compared after 3- and 6 months, respectively. All measurements were performed by an independent radiologist. Mobility results after 6 months were available for 77 patients (43 ABC/34 CSLP). Mean segmental mobility for the ABC group was 1.7 mm at the time of discharge, 1.4 mm after 3 months, and 0.8 mm after 6 months. For the CSLP- group the measurements were 1.0, 1.8, and 1.7 mm, respectively. The differences of mean segmental mobility were statistically significant between both groups after 6 months (P = 0.02). Four patients of the CSLP-group demonstrated surgical hardware complications, whereas no implant complications were observed within the ABC-group (P = 0.0375). Dynamic plate designs provided a faster fusion of the cervical spine compared with rigid plate designs after prior spinal surgery. Moreover, the rate of implant complications was lower within the group of patients receiving a dynamic plate. These interim results refer to a follow-up period of 6 months after prior spinal surgery. Further investigations will be performed 2 years postoperatively.     

Synthesis and physico-chemical properties of poly[4-(1,1,3,3-tetramethylbutyl)phenyl methacrylate]

Poly[4-(1,1,3,3-tetramethylbutyl)phenyl methacrylate] ( 1a ) was synthesized and its physicochemical properties were determined in the condensed phase and in dilute solution. The polymerization of 4-(1,1,3,3-tetramethylbutyl)phenyl methacrylate was carried out by radical mechanism in solution with 2,2′-azoisobutyronitrile as initiator. Several samples were characterized by their intrinsic viscosity, by osmometric measurements, differential scanning calorimetry, and X-ray diffraction. The viscometric behaviour of fractions of 1a was studied in good solvents and theta solvents, and the conformational parameters were calculated. Polymer 1a presents an unusual high rigidity in the chain. X-Ray diffraction of this polymer indicates a one-dimensional ordering of a mesomorphic type.     

Relevance of HIV-1-specific CD4+ helper T-cell responses during structured treatment interruptions in patients with CD4+ T-cell nadir above 400/mm3

OBJECTIVES: To analyze the dynamics of both HIV-1-specific CD4 and CD8 T-cell responses during structured treatment interruptions (STIs) in chronically HIV-1-infected (CHI) patients and to correlate them with the viral set point achieved. METHODS: Forty-five early-stage CHI patients who were on highly active antiretroviral therapy (HAART) for at least 1 year and underwent STI were included. Plasma viral load (VL), peripheral blood mononuclear cell (PBMC) lymphoproliferative (LPR) response to HIV p24 protein, and HIV-1 epitope-specific interferon-gammarelease from CD8 T cells were measured over a minimum study period of 2 years. RESULTS: VL set point during final STI was both significantly lower than, and positively correlated to, baseline VL (P < 0.0001: mean VL reduction 0.77 log10, and r = 0.42, P = 0.004, respectively). CD4 LPRs to p24 increased significantly (P = 0.001) between day 0 of the first STI cycle and 4th STI but decreased thereafter. VL set point during final STI was significantly and negatively correlated with LPRs to p24 at both 2nd STI and 4th STI. Nevertheless, at week 52, 12 weeks after the end of the last STI, LPRs were weak and transient in all patients and were not correlated with VL set point. Moreover, the magnitude and breadth of HIV-1-specific CD8 T-cell responses increased significantly (P < 0.0001) between day 0 and week 52. The largest increases occurred during the final STI. Even though VL reached set point by week 12 of the final STI, HIV-1-specific CD8 T-cell responses did not stabilize but rather increased until the end of the follow-up and did not correlate with plasma VL (r = 0.01, P = 0.88). CONCLUSIONS: STIs do not lead to control of viral replication in CHI patients, probably due to the fact that boosted CTL responses lack strong and durable helper T-cell responses. To reset the VL set point, new approaches that effectively augment and preserve helper T-cell responses should be investigated.     

Evaluation of the image quality of ink-jet printed paper copies of digital chest radiographs as compared with film: A receiver operating characteristic study

Paper copies of digital radiographs printed with the continuous ink-jet technique have proved to be of a high enough quality for demonstration purposes. We present a study on the image quality of ink-jet printed paper copies of digital chest radiographs, based on receiver operating characteristic (ROC) analysis. Eighty-three digital radiographs of a chest phatom with simulated tumors in the mediastinum and right lund, derived from a computed radiography (CR) system were presented in two series of hard copies as ink-jet printed paper copies and as laser recorded film. The images, with a matrix of 1,760×2,140 pixels, were printed with a spatial resolution of 10 pixels/mm in the CR film recorder as well as in the ink-jet printer. On film, every image was recorded in two versions, one optimized for the mediastinum and one for the lungs. On paper, only one image was printed; this constituted an effort to optimize both the mediastinum and the lungs. The ink-jet printed images, printed on a matt coated paper, were viewed as on-sight images with reflected light. The exdaminations were reviewed by six radiologists, and ROC curves were constructed. No significant difference was found between the performance of film and that of ink-jet paper prints. Because the cost for a paper copy is only a tenth of that of film, remarkable cost reductions can be achieved by using the ink jet technique instead. Our results show that further quality studies of ink-jet printed images are worthwhile.     

Possibilities and limitation of prenatal diagnosis and carrier determination for Duchenne and Becker muscular dystrophy using cDNA probes.

Two cDNA probes, cf23a and cf56a, identify deletions of selected exons in about 50% of our DMD/BMD patients. We have estimated the most likely order of the 11 exons detectable with both probes with respect to the different extensions of the deletions. In one of our BMD pedigrees, the observed deletion could be traced in the affected males through three generations. This result shows that with the use of cDNA probes detecting deletions, the only risk of error in genomic prenatal diagnosis is the general high frequency of new mutations for DMD/BMD. This is important progress in diagnosis compared to the 2 to 5% risk of misdiagnosis because of crossing over events using conventional linkage analysis with bridging or intragenic probes. The first prenatal diagnosis of an unaffected fetus of a woman who is a DMD carrier according to ultrasound examination is described. In one of our DMD males, the cDNA probe cf56a detects a deletion breakpoint. His sister also shows the altered band and is therefore a DMD carrier, while his mother has a totally normal band pattern. The interpretation of this observation could be either germline mosaicism or two identical new mutations. The identification of deletion breakpoints is a new diagnostic strategy, especially for carrier determination, which excludes misdiagnosis owing to crossing over events and the problems of dosage estimation. It is, however, limited by the low frequency of breakpoints detectable with cDNA probes. Therefore, the generation of new intron probes in this region is an important goal.