Dried Wild-Grown Mushrooms Can Be Considered a Source of Selected Minerals

Dried mushrooms might be a source of mineral components, which are indispensable for human health. The aim of this study was to determine the contents of calcium (Ca), magnesium (Mg), iron (Fe), zinc (Zn), copper (Cu), manganese (Mn), and selenium (Se) in dried wild-grown mushrooms (Boletus edulis and Xerocomus badius) available for sale, and to evaluate these mushrooms’ contribution to the daily reference intake of the studied bioelements. The concentrations of mineral components in the mushroom samples were determined by the flame method (Ca, Mg, Fe, Zn, Cu, Mn) and the electrothermal (Se) atomic absorption spectrometry method. The mean Ca, Mg, Fe, Zn, Cu, Mn (in mg/kg), and Se concentrations (in µg/kg) in B. edulis were 82.1, 964.1, 233.4, 97.9, 25.3, 22.1, and 6501.6, respectively, whereas in X. badius: 67.5, 1060.2, 87.8, 197.2, 33.9, 19.8, and 282.4, respectively. We have shown that dried B. edulis can be considered a source of Se. In the case of the other microelements, the tested mushrooms may serve only as additional supplements. Therefore, the studied species of mushrooms cannot be regarded as potential nutritional sources of the macroelements in question. Consumers should be properly informed about this, which should be guaranteed by appropriate legal regulations.     

Selected Physical and Spectroscopic Properties of TPS Moldings Enriched with Durum Wheat Bran

The impact of the amount of durum wheat bran additive used on the selected structural, mechanical, and spectroscopic properties of thermoplastic starch moldings was examined in this study. Bran was added to corn starch from 10 to 60% by weight in the blends. Four temperature settings were used for the high-pressure injection: 120, 140, 160, and 180 °C. The highest value of elongation at break (8.53%) was observed for moldings containing 60% bran. Moreover, for these moldings, the tensile strength and flexural strength were lower (appropriately 3.43 MPa and 27.14 MPa). The highest deformation at break (1.56%) were obtained for samples with 60% bran and injection molded at 180 °C. We saw that higher bran content (50 and 60%) and a higher injection molding temperature (160 °C and 180 °C) significantly changed the color of the samples. The most significant changes in the FTIR spectra were observed at 3292 and 1644 cm⁻¹ and in the region of 1460–1240 cm⁻¹. Moreover, notable changes were observed in the intensity ratio of bands at 1015 and 955 cm⁻¹. The changes observed correspond well with the amount of additive used and with the injection temperature applied; thus it may be considered as a marker of interactions affecting plasticization of the material obtained.     

Maternal serum concentration of angiogenic factors: PIGF, VEGF and VEGFR-1 and placental volume in pregnancies complicated by intrauterine growth restriction

INTRODUCTION: Pathomechanism of intrauterine growth restriction is a complex issue, involving many different factors, and is still undergoing an investigation. Improper placental angiogenesis, resulting in placental pathology, is considered to be one of the most important causes of IUGR. Placental vascular growth factors--placental growth factor (PIGF), vascular endothelial growth factor (VEGF) and its receptor (VEGFR-1), are involved in the mechanism of placental vascular development and maternal endothelial function during the pregnancy. AIM: The aim of our study was to evaluate the maternal serum concentration of vascular growth factors (PIGF, VEGF) and their receptor (VEGFR-1), as well as the placental volume in pregnancies complicated by IUGR, and to compare the results with healthy control groups. MATERIAL AND METHODS: 20 patients with intrauterine growth restriction and 18 healthy pregnant women were recruited. Their blood serum samples were assayed for the placental growth factor (PIGF), vascular endothelial growth factor (VEGF) and their receptor (VEGFR-1). These placental factors were measured with the ELISA- method (R@D Systems Kits. In all cases the placental volume was assessed with an ultrasound (Voluson V730 GE) with VOCAL (Virtual Organ Komputer-aided AnaLysis). RESULTS: Our investigation revealed significantly lower maternal serum concentrations of PIGF in pregnancies with IUGR, comparing to the controls in the third trimester. In most cases, VEGF concentrations were undetectable in the maternal serum both, in the second as well as in the third trimester. In the 2nd trimester VEGFR-1 concentrations were statistically higher in the investigated group. In the 3rd trimester the concentrations of VEGFR-1 were higher in the investigated group, but the difference has not achieved the level of statistical importance. The mean placental volume was lower in the investigated group but with not statistical gnificance. CONCLUSIONS: Presented and documented dependencies may indicate the involvement of angiogenic factors in a pathomechanism of intrauterine growth restriction process. It seems that the measurement of placental volume may be useful in IUGR diagnosis. However, it should be a complementary examination only, due to technical limitations.     

Studies of Selective Recovery of Zinc and Manganese from Alkaline Batteries Scrap by Leaching and Precipitation

Recovery of zinc and manganese from scrapped alkaline batteries were carried out in the following way: leaching in H₂SO₄ and selective precipitation of zinc and manganese by alkalization/neutralization. As a result of non-selective leaching, 95.6–99.7% Zn was leached and 83.7–99.3% Mn was leached. A critical technological parameter is the liquid/solid treatment (l/s) ratio, which should be at least 20 mL∙g⁻¹. Selective leaching, which allows the leaching of zinc only, takes place with a leaching yield of 84.8–98.5% Zn, with minimal manganese co-leaching, 0.7–12.3%. The optimal H₂SO₄ concentration is 0.25 mol∙L⁻¹. Precipitation of zinc and manganese from the solution after non-selective leaching, with the use of NaOH at pH = 13, and then with H₂SO₄ to pH = 9, turned out to be ineffective: the manganese concentrate contained 19.9 wt.% Zn and zinc concentrate, and 21.46 wt.% Mn. Better selectivity results were obtained if zinc was precipitated from the solution after selective leaching: at pH = 6.5, 90% of Zn precipitated, and only 2% manganese. Moreover, the obtained concentrate contained over 90% of ZnO. The precipitation of zinc with sodium phosphate and sodium carbonate is non-selective, despite its relatively high efficiency: up to 93.70% of Zn and 4.48–93.18% of Mn and up to 95.22% of Zn and 19.55–99.71% Mn, respectively for Na₃PO₄ and Na₂CO₃. Recovered zinc and manganese compounds could have commercial values with suitable refining processes.     

Effect of Laser Heating on the Life of Cutting Tools Coated with Single- and Multilayer Coatings Containing a TiN Layer

This study proposes a novel use of laser heating to increase the adhesion between coatings fabricated by low-temperature PVD and replaceable cemented carbide cutting inserts, thus extending the life of these cutting tools in the machining of difficult-to-machine materials. Our previous studies conducted on CVD coatings showed that these coatings had higher adhesion due to a much higher process temperature. However, taking into account the fact that PVD coatings have better technological properties (e.g., lower structure porosity, higher hardness, and better tribological properties) than CVD coatings, it is fully justified to investigate ways of improving the PVD coating adhesion to the substrate. In this study, replaceable cutting inserts with different hard coatings of titanium nitride were used. Laser heating was conducted with different power densities. The adhesion strength of the tested coatings was determined via vibration spectrum analysis. In addition, 2D surface imaging, scanning electron microscopy, and X-ray fluorescence spectrometry were employed to examine the coatings after laser heating. A significant increase in the adhesion of single-layer (TiN) and double-layer (TiCN + TiN) coatings to the cemented carbide substrate, together with increased tool life, was observed after heating the samples with 40% of the maximum laser power. The application of a multilayer coating containing thermal shock-sensitive (TiAlSi) N did not increase the tool life. This paper attempts to interpret the obtained results.     

Applicability Assessment of Different Materials for Standards Ensuring Comparability of Optical and Tactile Coordinate Measurements

Multisensor CMMs are systems with an established position on the market, but their popularity still grows, as they provide access to the advantages offered by tactile and contactless measurement methods. Yet there are still questions of the comparability of results obtained using the optical and tactile operation modes of multisensor system. This phenomenon can be assessed by measuring appropriate gauges, most often reference rings or spheres. Due to the completely different nature of probing processes for tactile and contactless measurements, the material from which reference object is made may significantly affect measurement results. In order to assess the influence of this factor on measurement accuracy, three reference spheres made from different materials were measured on optical multisensor CMMs. Measurements involved tactile measurements as well as optical measurements made using different probing systems: a video probe and white light sensor. Results obtained from performed experiments show large differences depending on the material used for spherical standard production. On the basis of obtained results, it can be stated that the best material for a reference object that can be used for comparability tests of tactile and optical measurements is a composite of alumina with at least one oxidic additive.     

Machine Learning Approaches for Monitoring of Tool Wear during Grey Cast-Iron Turning

The dynamic development of new technologies enables the optimal computer technique choice to improve the required quality in today’s manufacturing industries. One of the methods of improving the determining process is machine learning. This paper compares different intelligent system methods to identify the tool wear during the turning of gray cast-iron EN-GJL-250 using carbide cutting inserts. During these studies, the experimental investigation was conducted with three various cutting speeds vc (216, 314, and 433 m/min) and the exact value of depth of cut a_p and federate f. Furthermore, based on the vibration acceleration signals, appropriate measures were developed that were correlated with the tool condition. In this work, machine learning methods were used to predict tool condition; therefore, two tool classes were proposed, namely usable and unsuitable, and tool corner wear VBc = 0.3 mm was assumed as a wear criterium. The diagnostic measures based on acceleration vibration signals were selected as input to the models. Additionally, the assessment of significant features in the division into usable and unsuitable class was caried out. Finally, this study evaluated chosen methods (classification and regression tree, induced fuzzy rules, and artificial neural network) and selected the most effective model.     

Analysis of Dietary Habits and Nutritional Status of Children with Down Syndrome in the Context of Lipid and Oxidative Stress Parameters

Introduction: The risk of obesity in children with Down syndrome is high. Undoubtedly, proper nutrition plays an important role in the prevention of excess body weight and is associated with a reduction of metabolic complications. The aim of the study was to assess the problem of disturbances in the nutritional status and eating habits of children with DS. Methods: A total of 39 patients were included in the study. The nutritional status was assessed by anthropometric tests and Dual X-ray Absorptiometry. Eating habits were assessed using the Child Eating Behavior Questionnaire and the Food Frequency Questionnaire. Blood samples were taken to determine the oxidative stress and lipid parameters. Results: Obesity was recognized in 15% of subjects and 23% were overweight. Children that were overweight were characterized by higher levels of triglycerides, atherogenic index of plasma, and apoA2 and apoE levels. Fat mass, fat mass/height² index, and visceral fat mass correlated with thiobarbituric acid reactive substances and advanced oxidative protein product level. The analysis of the Child Eating Behavior Questionnaire showed that children struggling with being overweight were more interested in food compared to those with normal body weight. A positive correlation was identified between waist circumference and food interest categories. Insufficient consumption of dairy products, vegetables, whole grain products, as well as fruits, seeds, nuts, and fatty fish was noted. Patients were less likely to consume products that are a good source of mono- and polyunsaturated fatty acids. Conclusions: In children with Down syndrome and obesity, disturbances in lipid and oxidative stress parameters are observed. Abnormal eating habits in all children with Down syndrome regardless of their nutritional status were noted. Proper nutritional education, nutritional control, and management of metabolic problems are essential in this group of patients.     

Angiopoietin-2 as a biomarker of non-ST-segment elevation myocardial infarction in patients with or without type 2 diabetes

IntroductionAngiopoietin-2 (Ang-2) is a novel marker of coronary artery disease (CAD) and diabetes (DM). The aim was to evaluate Ang-2 as a potential new biomarker of non-ST elevation myocardial infarction (NSTEMI) in patients with or without type 2 DM (T2DM).Material and methodsThis was a multi-center, prospective study that included 138 (males: 91/66%) consecutive patients hospitalized due to NSTEMI, T2DM, or different cardiac disorders. The subjects were divided into four study groups: group A: 28 patients with NSTEMI and T2DM; group B: 47 patients with NSTEMI without T2DM; group C: 31 patients with T2DM, without a history of CAD; group D: 32 patients as a control group. Patients with NSTEMI underwent urgent coronarography. Clinical characteristics including biomarkers (hs-CRP, hsTnT, NT-proBNP, VEGF, HbA_1c), SYNTAX SCORE, type of intervention (PCI vs. CABG), and number of implanted stents were taken into account in the analysis.ResultsSerum Ang-2 concentrations were significantly higher in patients with NSTEMI (group A: 1769 pg/ml; group B: 1757 pg/ml) and patients with T2DM (group C: 1993 pg/ml) as compared to the patients without CAD and without T2DM (group D: 866.8 pg/ml; p < 0.05). The prognostic accuracy of Ang-2 in NSTEMI diagnosis was determined with the area under the ROC curve (area under curve (AUC) = 0.63).ConclusionsAngiopoietin-2 serum concentration is elevated in the presence of NSTEMI in patients with and without T2DM and does not correspond to the degree of myocardial injury and hemodynamic status. Ang-2 remains elevated also in patients with T2DM without a history of CAD.