Evaluation of the FASTPlaqueTB assay for direct detection of Mycobacterium tuberculosis in sputum specimens.

SETTING: Sputum samples were collected from suspected tuberculosis patients attending out-patient clinics at the Ojha Institute of Chest Diseases, Karachi, Pakistan. OBJECTIVE: To evaluate the performance of the FASTPlaqueTB assay for rapid diagnosis of pulmonary tuberculosis. DESIGN: A comparative study of 584 sputum samples using acid-fast smear microscopy, Lowenstein-Jensen culture and FASTPlaqueTB. RESULTS: A total of 514 samples yielded complete results. Seventy specimens were lost to analysis due to the overgrowth of contaminants. The addition of antimicrobials inhibited growth of gram-positive contaminants, and reduced the overall contamination rate from 18.2% to 7.2%. Mycobacterium tuberculosis was isolated from 175 smear-positive and 70 smear-negative specimens. FASTPlaqueTB detected M. tuberculosis in 81.6% of specimens, with a specificity of 97.7%. The sensitivity and specificity of the assay for smear-positive specimens were respectively 87.4% and 88.2%. For smear-negative specimens, the sensitivity of the assay was 67.1% and the specificity was 98.4%. The combined sensitivity of smear and FASTPlaqueTB for M. tuberculosis was 90%. Test results were available in 48 hours. CONCLUSION: FASTPlaqueTB is a sensitive and specific test for rapid diagnosis of pulmonary tuberculosis in high prevalence areas. The test is sensitive enough to confirm a large number of clinically suspected smear-negative cases and improve case finding.     

Dexamethasone, paclitaxel, etoposide, cyclophosphamide (d-TEC) and G-CSF for stem cell mobilisation in multiple myeloma

Forty-one patients with multiple myeloma were treated with a novel stem cell mobilisation regimen. The primary end points were adequate stem cell mobilising ability (>1% circulating CD34-positive cells) and collection (> or = 4 x 10(6) CD34-positive cells/kg), and safety. The secondary end point was activity against myeloma. The regimen (d-TEC) consisted of dexamethasone, paclitaxel 200 mg/m(2) i.v., etoposide 60 mg/kg i.v., cyclophosphamide 3 g/m(2) i.v., and G-CSF 5-10 microg/kg/day i.v. A total of 84 cycles were administered to these 41 individuals. Patient characteristics included a median age of 53 years, a median of five prior chemotherapy cycles, and a median interval of 10 months from diagnosis of myeloma to first cycle of d-TEC. Seventy-five percent of the patients had stage II or III disease, 50% had received carmustine and/or melphalan previously, and 25% had received prior radiation therapy. Eighty-eight percent of patients mobilised adequately after the first cycle of d-TEC and 91% mobilized adequately after the second cycle. An adequate number of stem cells were collected in 32 patients. Of the remaining nine patients, three mobilised, but stem cells were not collected, two mobilised but stem cell collection was < 4 x 10(6) CD34-positive cells/kg, three did not mobilise, and one died of disease progression. Major toxicities included pancytopenia, alopecia, fever and stomatitis. One patient died from multi-organ failure and progressive disease. Fifty percent of evaluable patients demonstrated a partial response and 28.6% of patients had a minor response. This novel dose-intense regimen was safe, capable of stem cell mobilisation and collection, even in heavily pre-treated patients, and active against the underlying myeloma.     

Effect of bivalirudin on length of stay in the recovery area after percutaneous coronary intervention compared with heparin alone, heparin + abciximab, or heparin + eptifibatide

Three hundred nine patients were followed during their recovery area stay after percutaneous coronary intervention. Recovery area times for patients who received bivalirudin during percutaneous coronary intervention showed an average reduction in total recovery area length of stay of 36 minutes (p <0.0001) compared with patients who received heparin alone. This reduction was also seen when compared with the heparin + abciximab group (46-minute reduction, p = 0.0007), and the heparin + eptifibatide group (35-minute reduction, p = 0.0005). Patients who received bivalirudin took significantly less time for the activated clotting time (ACT) to normalize despite significantly higher average ACTs and significantly fewer subtherapeutic ACTs.     

An analysis of the continuing professional development needs of radiographers and radiation therapists in Singapore

IntroductionContinuing Professional development (CPD) is deemed essential for the Radiographers (DR) and Radiation Therapists (RT) after Singapore commenced state registration. Diagnostic imaging and radiotherapy treatment services are constantly revolutionizing and those working in this field requires sufficient knowledge of the uptrends for training and development. The purpose of this survey is to identify the current training needs of the registered DR and RT in Singapore, and to understand their views about CPD activities.MethodsAn online questionnaire was disseminated by the Singapore Society of Radiographers (SSR) to all registered DR and RT in Singapore, and all practicing in restructured and private hospitals were included. Data collection took place from January 2018 to April 2018.Results102 responses were analysed, where 89 were DR and 13 were RT. CPD was provided in 72.5% (n = 74) of the participants’ institutions, and 69.6% (n = 71) of participants were aware of CPD. Interestingly, participants were significantly more likely to be unaware of CPD when working in an institution which do not offer CPD. Training programme objective was the most important factor for selecting a programme. 93.1% (n = 95) preferred SSR to support them for CPD. There were a few constraints to CPD engagements identified such as financial factors, lack of time, and institution availability.ConclusionThere was significant intrinsic motivation in a quality CPD activity. CPD activities should be current, accessible and relevant for the healthcare professionals to increase participation, which directly contributes to high standards of clinical care.Implications for practiceLocal healthcare institutions should be aware and address needs, gaps and aspirations of the local DR and RT community to ensure adequate preparation has been made upon initiation of mandatory CPD.     

Clinical Significance of Serum Soluble Fas,Fas Ligand and Fas in Intrahepatic Lymphocytes in Chronic Hepatitis C

Hepatitis C Virus (HCV) is a major etiological agent of chronic hepatitis, cirrhosis and hepatocellular carcinoma. Fas-mediated apoptosis is the major cause of hepatocyte damage during liver disease. The present work was performed to study the fas system (Fas-FasL and soluble Fas) in chronic hepatitis C infection. Also, to correlate the degree of liver cell damage with the Fas system. The study was carried out on 45 patients positive for HCV RNA by nested RT-PCR in addition to 13 HCV negative control subjects. Wedge liver biopsies samples were obtained from patients and controls during abdominal operations for determination of cellular expression of Fas and Fas-L on hepatocytes and infiltrating lymphocytes respectively by flow cytometry. Histological activity index (HAI) was determined in chronic HCV patients. Also blood samples were taken from patients and controls for determination of sFas. There was statistically insignificant difference in Fas expression in hepatocytes of patients (P?=?0.34) in comparison to control. Meanwhile, there was a statistically significant decrease in FasL expression in patients compared to control (P< 0.001) and statistically significant increase in soluble Fas in patients compared to control (P < 0.001). The HAI of liver fibrosis for all patients were within mild score with mean ± SD 4 ± 0.5. From this study, we could conclude that Fas system is one of the important pathways regulating the response to HCV infection. Increased serum sFas in HCV patients is accompanied by down-regulation of Fas/Fas-L expression resulting in inhibition of apoptosis in liver cells as a process for elimination of virus infected cells and this may ultimately leads to chronicity of the disease.     

Atrioventricular canal defect in patients with RASopathies

Congenital heart defects affect 60-85% of patients with RASopathies. We analysed the clinical and molecular characteristics of atrioventricular canal defect in patients with mutations affecting genes coding for proteins with role in the RAS/MAPK pathway. Between 2002 and 2011, 101 patients with cardiac defect and a molecularly confirmed RASopathy were collected. Congenital heart defects within the spectrum of complete or partial (including cleft mitral valve) atrioventricular canal defect were diagnosed in 8/101 (8%) patients, including seven with a PTPN11 gene mutation, and one single subject with a RAF1 gene mutation. The only recurrent mutation was the missense PTPN11 c.124 A>G change (T42A) in PTPN11. Partial atrioventricular canal defect was found in six cases, complete in one, cleft mitral valve in one. In four subjects the defect was associated with other cardiac defects, including subvalvular aortic stenosis, mitral valve anomaly, pulmonary valve stenosis and hypertrophic cardiomyopathy. Maternal segregation of PTPN11 and RAF1 gene mutations occurred in two and one patients, respectively. Congenital heart defects in the affected relatives were discordant in the families with PTPN11 mutations, and concordant in that with RAF1 mutation. In conclusion, our data confirm previous reports indicating that atrioventricular canal defect represents a relatively common feature in Noonan syndrome. Among RASopathies, atrioventricular canal defect was observed to occur with higher prevalence among subjects with PTPN11 mutations, even though this association was not significant possibly because of low statistical power. Familial segregation of atrioventricular canal defect should be considered in the genetic counselling of families with RASopathies.     

Magnetic phase transition from paramagnetic in Nb2AlC-MAX to superconductivity-like diamagnetic in Nb2C-MXene: an experimental and computational analysis

Transition metal carbides (TMCs) have recently emerged as competent members among the family of two-dimensional (2D) materials, owing to their promising applications. There are many promising applications of MXenes; however, their magnetic properties lack a wide margin, both experimentally as well as theoretically, which needs to be investigated for potential use in spintronics. In this study, we carried out a comprehensive etching process via selective extraction of Al layers from Nb₂AlC-MAX using a wet electrochemical route under well-optimized conditions to obtain fine 2D-Nb₂C MXene sheets. Structural analysis using X-ray diffraction (XRD) confirms the effective removal of Al followed by confirmation of a 2D layered structure from morphological analysis using scanning electron microscopy (SEM). Zero-field-cooled (ZFC) and field-cooled (FC) measurements of MAX and MXene at different field strengths were performed using a superconducting quantum interference device (SQUID). Magnetic measurements reveal the paramagnetic nature of Nb₂AlC-MAX measured under 5 mT; however, this changes to a clear superconductor-like diamagnetic behavior with a shift of the magnetization from positive to negative values at low temperatures when measured under 5 mT and 10 mT for Nb₂C MXene. The diamagnetism, however, is changed to paramagnetism at 100 mT, which shows the existence of critical fields known typically for a type-II superconductor. To gain an insight into this unusual behavior in MXene, density functional theory (DFT) first-principles calculation was also performed in Wein2K software using spin-polarized generalized gradient approximation (sp-GGA). The magnetic moment of the compound is calculated to be negative, which corresponds well with the experimental finding and suggests that the negative magnetic moment originated from the d-orbital of Nb₂C. The present report provides a pathway to deeply understanding the existence of superconductivity-like diamagnetic behavior in Nb₂C MXene, which is useful for future magnetic applications.

Transition metal carbides (TMCs) have recently emerged as competent members among the family of two-dimensional (2D) materials, owing to their promising applications.

In two-dimensional (2D) materials, magnetism at the nanoscale is at the forefront of many cutting-edge technological applications, such as spintronic devices. Naguib et al. have synthesized a new class of two-dimensional materials, known as MXenes (M_nX_n+1), discovered in 2011, giving a possibility of magnetism in such 2D materials and their promising uses in spintronic devices.¹ These 2D layer structured early transition metal carbides and/or nitrides are known as MXenes, so named to indicate their structural similarities with graphene.² MXenes are derived from 3D MAX phases (space group P6₃/mmc) in which “M” is an early transition metal, e.g., Ti, Ta, V, etc.; “A” is mainly a group 13 or group 14 element (group III-A or IV-A), e.g., Si, Al; “X” is a carbide, nitride or can be both; and n = 1, 2, 3 represents the number of layers, forming 211, 312 and 413 phases.^3–5 Over the past decade, this new material has gained enormous attention, thus developing an entirely new research field to disclose the properties of the 2D state of this material. The materials in the 2D regime own a cluster of astonishing physical properties as compared to the 3D nature, but intrinsic two-dimensional magnetism has proved to be challenging. As 2D semiconductors have revamped the field of electronics, similarly, magnetism in 2D materials could remodel spintronic devices that can employ a spin degree of freedom.^6,7Nb₂C MXene was first synthesized by Naguib et al., but they just reported its electrochemical activity as a promising electrode material.⁴ Further work has been reported in Nb₂C with various biomedical applications, energy storage, supercapacitors, and nanoelectronics.^9–19 As far as the magnetism in such 2D MXenes is concerned, it remains less investigated, and this research void needs to be filled. Recently, Babar et al. reported the observation of superconductivity in as-prepared powdered Nb₂C for the first time, with the highest onset transition temperature T_c,onset = 12.5 K among the MXene family. However, the authors did not discuss the magnetic nature of the parent Nb₂AlC MAX itself and did not reason for the presence of unusual magnetic effects in MXene.⁸ MXenes are favorable members of 2D magnetism, and different magnetic natures are computationally predicted in various carbide and nitride MXenes.^7,20 The existence of novel room-temperature ferromagnetic order in doped MXene and the coexistence of different magnetic phases in MXene, along with experimental evidence, indicate its potential of hosting diverse magnetic natures.^21,22 Considerable research has been focused on these 2D structures due to their importance and favorable applications, such as spintronics. MXene could provide a vast platform for exploring the magnetic properties and is one of the best candidates that can host superconductivity as compared to other members of the 2D family. Experimental studies are generally dependent upon numerous variables, thus affecting the research pace. However, density functional theory-based first principles calculation and theoretical simulations are a successful way to examine and foresee the properties of low-dimensional materials. This provoked us to theoretically explore superconductivity in Nb₂C and their validation through superconductivity measurements of experimentally synthesized Nb₂C MXene. In this work, we report a systematic etching mechanism of Nb₂C MXene to obtain fine 2D sheets via a chemical etching route using hydrofluoric (HF) acid. Structural and morphological studies using the X-ray diffraction technique (XRD), scanning electron microscopy (SEM) and elemental analysis by energy-dispersive X-ray spectroscopy (EDX) show the effective removal of Al from the parent 3D-Nb₂AlC MAX, thus revealing an accordion-like sheet structure. Optical analysis indicates a significant reduction in bandgap after chemical etching. Magnetic properties were carried out to observe the signatures of superconductivity (a perfect diamagnetic state, negative magnetic moment) and its magnetic nature at room temperature. To study the magnetic nature of as-prepared powder-form Nb₂C, density functional theory (DFT) first principles calculation was carried out through Wein2K using spin-polarized generalized gradient approximation (sp-GGA). The magnetic moment of the compound is calculated to be −0.00485, which although but small is important, as the value is negative, which is an indication of the presence of diamagnetism in Nb₂C. Here, the detailed chemical etching process, magnetic properties of Nb₂AlC MAX and its effect on magnetic phase of Nb₂C MXene, and the density functional theory calculation are reported, which were not discussed by Babar et al. in ref. 8.     

Surgical repair of pectus excavatum relieves right heart chamber compression and improves cardiac output in adult patients—an intraoperative transesophageal echocardiographic study

Background

Cardiac compression in pectus excavatum (PE) deformity and effect of PE surgery on cardiac function in adults have been debated. We examined the effect of PE correction on right heart size and cardiac output.

Methods

A retrospective evaluation was performed of 168 adult patients who underwent a modified Nuss PE repair with intraoperative transesophageal echocardiography from 2011 to 2014. Seventeen patients with prior PE repair undergoing bar removal acted as controls.

Results

Mean age was 33.0 years (range, 18 to 71 years). There was an increase in right atrium (15.1%), tricuspid annulus (10.9%), and right ventricular outflow tract (6.1%) size after surgery (all P < .0001). Right ventricular cardiac output measured in a subset of 42 patients improved by 38%. No change in chamber size or cardiac output occurred before and after bar removal surgery in the control group.

Conclusions

Surgical correction of PE deformity caused a significant improvement in right heart chamber size and cardiac output.