Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.     

Effect of Tropicamide on Laser Flare Meter Measurements in Patients with Pseudoexfoliation

ABSTRACT

Purpose

To investigate the effect of 1% tropicamide on anterior chamber aqueous flare (ACAF) measurements acquired with laser flare meter in patients with pseudoexfoliation.     

Design and synthesis of novel organometallic complexes using boronated phenylalanine derivatives as potential anticancer agents

Drug design and discovery studies are important because of the prevalence of diseases without available medical cures. New anticancer agents are particularly urgent because of the high mortality rate associated with cancer. A series of mononuclear gold (III) and platinum (II) complexes based on boronated phenylalanine (BPA) were designed and synthesized using 4,4’-dimethyl-2,2’-dipyridyl (L1) or 1,10-phenanthroline-5,6-dion (L2) ligands to obtain promising anticancer drug candidates. Proton nuclear magnetic resonance, infrared, mass spectrometry, and elemental analyses were utilized for chemical characterizations. Cell viability, cancer cell colony formation, endothelial tube formation, and cytoskeleton staining assays were performed using A549 lung adenocarcinoma and human umbilical vein endothelial cells (HUVECs) to investigate preliminary pharmacological activities. L1-based platinum (II) complex (BPA-L1-Pt) was the most promising complex, and has similar activity with the approved chemotherapy drug cis-platinum. Half maximal inhibitory concentration values for BPA-L1-Pt were 9.15 µM on A549s and 16.61 µM on HUVECs; the values for cis-platinum were 5.24 µM on A549s and 23.14 µM on HUVECs. Consequently, further synthesis studies should be performed to boost the cancer cell selectivity feature of BPA by varying metal and ligand types.     

MRI评估控便功能异常的研究进展

控便功能是指当产生便意时,可以辨别粪便干稀急缓,并能正常控制其排出的能力.因一些意外因素,如盆底功能障碍、某些先天性疾病及盆腔恶性肿瘤术后会导致此功能受损,而严重影响患者的生活质量.近年来,诸多国内外学者对控便功能障碍患者进行了临床和影像学研究,能够认知控便功能受损的造成因素及改善方法,对于术前术后制定治疗方案具有重要的临床价值,是目前研究的焦点.以MRI从影像学角度为阐述其障碍发生的可能机制及改善预后提供一定依据.因此,笔者对近年来控便功能障碍的MRI研究进展做简要综述.     

Patterns in metabolite profile are associated with risk of more aggressive prostate cancer: A prospective study of 3,057 matched case–control sets from EPIC

Metabolomics may reveal novel insights into the etiology of prostate cancer, for which few risk factors are established. We investigated the association between patterns in baseline plasma metabolite profile and subsequent prostate cancer risk, using data from 3,057 matched case–control sets from the European Prospective Investigation into Cancer and Nutrition (EPIC). We measured 119 metabolite concentrations in plasma samples, collected on average 9.4 years before diagnosis, by mass spectrometry (AbsoluteIDQ p180 Kit, Biocrates Life Sciences AG). Metabolite patterns were identified using treelet transform, a statistical method for identification of groups of correlated metabolites. Associations of metabolite patterns with prostate cancer risk (OR_1SD) were estimated by conditional logistic regression. Supplementary analyses were conducted for metabolite patterns derived using principal component analysis and for individual metabolites. Men with metabolite profiles characterized by higher concentrations of either phosphatidylcholines or hydroxysphingomyelins (OR_1SD = 0.77, 95% confidence interval 0.66–0.89), acylcarnitines C18:1 and C18:2, glutamate, ornithine and taurine (OR_1SD = 0.72, 0.57–0.90), or lysophosphatidylcholines (OR_1SD = 0.81, 0.69–0.95) had lower risk of advanced stage prostate cancer at diagnosis, with no evidence of heterogeneity by follow-up time. Similar associations were observed for the two former patterns with aggressive disease risk (the more aggressive subset of advanced stage), while the latter pattern was inversely related to risk of prostate cancer death (OR_1SD = 0.77, 0.61–0.96). No associations were observed for prostate cancer overall or less aggressive tumor subtypes. In conclusion, metabolite patterns may be related to lower risk of more aggressive prostate tumors and prostate cancer death, and might be relevant to etiology of advanced stage prostate cancer.     

Heteroepitaxy of Cerium Oxide Thin Films on Cu(111)

An important part of fundamental research in catalysis is based on theoretical and modeling foundations which are closely connected with studies of single-crystalline catalyst surfaces. These so-called model catalysts are often prepared in the form of epitaxial thin films, and characterized using advanced material characterization techniques. This concept provides the fundamental understanding and the knowledge base needed to tailor the design of new heterogeneous catalysts with improved catalytic properties. The present contribution is devoted to development of a model catalyst system of CeO₂ (ceria) on the Cu(111) substrate. We propose ways to experimentally characterize and control important parameters of the model catalyst—the coverage of the ceria layer, the influence of the Cu substrate, and the density of surface defects on ceria, particularly the density of step edges and the density and the ordering of the oxygen vacancies. The large spectrum of controlled parameters makes ceria on Cu(111) an interesting alternative to a more common model system ceria on Ru(0001) that has served numerous catalysis studies, mainly as a support for metal clusters.