NO-cGMP signaling molecules in cells of the rat molar dentin-pulp complex

By the formation of cyclic guanosine 3',5'-monophosphate (cGMP), nitric oxide (NO)-sensitive enzyme-soluble guanylate cyclase (sGC) plays a receptor role for NO within the NO-cGMP signaling cascade, which is involved in vasodilatation and neurotransmission. The hypothesis that NO-cGMP signaling molecules modulate cells of the dentin-pulp complex was investigated in rat molars by histochemical, immunohistochemical, immuno-ultrastructural, and organ bath techniques. NO synthase (NOS) I-III, the sGC alpha(2)-subunit/beta(1)-subunit, and cGMP were detected in odontoblasts and blood vessels. NOS I, sGC alpha(2), and cGMP were identified in nerve fibers. Treatment of rat molars with the NO donor NONOate (10(-5) M) increased cGMP staining intensities in blood vessels and odontoblasts, while NO synthase inhibitor L-NAME (10(-4) M) attenuated intensity of the reaction products for cGMP, suggesting an effect of endogenous NO on sGC. These correlations of patterns and alterations of cGMP staining intensities after treatment with the NO donor or NO inhibitor might represent an NO-sGC-cGMP signaling-dependent modulation of odontoblasts, blood vessels, and nerve fibers in the dentin-pulp complex.     

Multiphase CT angiography versus single-phase CT angiography: comparison of image quality and radiation dose

BACKGROUND AND PURPOSE: Conventional CT angiography (CTA) is acquired during only a short interval in the arterial phase, which limits its ability to evaluate the cerebral circulation. Our aim was to compare the image quality and radiation dose of conventional single-phase CTA (SP-CTA) with a multiphase CTA (MP-CTA) algorithm reconstructed from a perfusion CT (PCT) dataset.MATERIALS AND METHODS: Fifty consecutive patients undergoing head CTA and PCT in 1 examination were enrolled. The PCT dataset was obtained with 40.0-mm-detector coverage, 5.0-mm axial thickness, 80 kilovolt peak (kVp), 180 mA, and 30 mL of contrast medium. MP-CTA was reconstructed from the same PCT dataset with an axial thickness of 0.625 mm by using a new axial reconstruction algorithm. A conventional SP-CTA dataset was obtained with 0.625-mm axial thickness, 120 kVp, 350 mA, and 60 mL of contrast medium. We compared image quality, vascular enhancement, and radiation dose.RESULTS: SP-CTA and MP-CTA of 50 patients (male/female ratio, 31/19; mean age, 59.25 years) were analyzed. MP-CTA was significantly better than SP-CTA in vascular enhancement (P = .002), in the absence of venous contamination (P = .006), and was significantly higher in image noise (P < .001). MP-CTA used less contrast medium than SP-CTA and could demonstrate hemodynamic information. The effective dose of MP-CTA was 5.73 mSv, which was equal to that in conventional PCT, and it was 3.57 mSv in SP-CTA.CONCLUSION: It is feasible that MP-CTA may provide both CTA and PCT results. Compared with SP-CTA, MP-CTA provides comparable image quality, better vascular enhancement, hemodynamic information, and more noise with less detail visibility with a lower tube voltage. The radiation dose of MP-CTA is higher than that of SP-CTA, but the dose can be reduced by altering the sampling interval.

Cerebral CT angiography (CTA) is a well-established minimally invasive diagnostic procedure used to detect cerebral aneurysms, acute vascular occlusions, or vasospasms and even predicts hematoma expansion in acute intracerebral hemorrhage.^1–6 Cerebral perfusion CT (PCT) is an important tool to evaluate cerebral ischemia, infarction, cerebral vascular reserve, and microvascular permeability of intracranial neoplasms.⁷ With PCT, the linear relationship between contrast concentration and pixel intensity lends itself more readily to quantification of blood flow values, compared with bolus contrast MR perfusion imaging.^8,9 PCT generates parametric maps of blood flow, including cerebral blood flow (CBF), cerebral blood volume (CBV), and mean transit time (MTT), by using complex deconvolution algorithms.⁷ In a systematic review, the authors concluded that the most accurate assessment of the site of occlusion, infarct core, salvageable brain tissue, and collateral circulation in patients suspected of acute stroke is by a combination of PCT and CTA.¹⁰ Compared with the dose used for single-detector-row CT, thin-section, multidetector CT (MDCT) requires an increased radiation dose for both CTA and PCT examinations.^11–13 To attain an “as low as reasonably achievable radiation dose,” many techniques have been tried to optimize radiation-dose levels in MDCT CTA.Currently, most commercialized CT scanners provide axial scanning in maximum z-axis coverage of 40-mm (2.5 mm × 16) sections; thin-thickness reconstruction modes can be scanned in 20-mm (0.625 mm × 32) sections. During acquisition of conventional CTA, only a short interval in the arterial phase is taken for reconstruction. We call this “single-phase CTA” (SP-CTA). During PCT examinations, to evaluate the area of attenuation change, we acquired axial scans of sequential images at the same level in a fixed or variable time interval (ie, multiphase mode). With the increasing scanning speed of CT, the time interval can be reduced to 0.5 second in state-of-the-art MDCT. Scanning coverage is still a problem because of the cone beam geometry in current MDCT. The fully sampled region, the region covered by every view in the scanning, is less than the cylinder, with a height equal to the detector isocenter coverage.^14,15 To overcome this problem, we used extrapolation during the back projection process. The cone beam effect increases farther away from the isocenter and becomes more prominent with a larger FOV. Under such conditions, a novel vendor reconstruction algorithm has been developed to solve the cone beam effect, conducting a 40-mm beam of 64i × 0.625 mm in an axial scanning. We can then obtain raw data of thin-section PCT and perform postprocessing to reconstruct CTA from this thin-section PCT. Because such CTA images contain data from different time points, we call the technique “multiphase CTA” (MP-CTA), in contrast to conventional single-phase (SP-CTA). This study was designed to compare the image quality and radiation dose of MP-CTA by using the novel thin-reconstruction algorithm from the PCT dataset with the SP-CTA data from the same patient.     

Interbody arthrodesis using a plasmapore titanium block. Mechanical and histological experimental study in sheep

A Plasmapore-coated titanium alloy block was implanted in ewes for the purpose of providing interbody fusion. Four blocks were implanted in each ewe: one uncoated block (without Plasmapore) serving as a reference specimen and three blocks coated with Plasmapore. Mechanical testing and histological study were performed on five ewes. OBJECTIVES: Determination of the quality of the mechanical and histological anchorage of the Plasmapore implanted in the interbody space in the same animal living under conditions of physical strain exerted on the spine. METHODS: Four months after surgical implantation of the block, the ewes were sacrificed: the removed spines were frozen for subsequent mechanical analysis and preserved in a solution of 40 degrees alcohol for subsequent histological analysis. X-rays were taken to evaluate the positioning of the implant. The mechanical analysis included extraction tests, measuring the maximum extraction force and evaluating the stiffness of the system, being indicative of the mechanical fixation quality. The histological study included both qualitative and quantitative analysis, together with an evaluation of the osteointegration of the blocks coated with Plasmapore. RESULTS: After 4 months of implantation, a mean extraction force of 990 N was necessary for the blocks coated with Plasmapore, and of 1.338 N for the blocks coated with Plasmapore with additional osteosynthesis, whereas a mean extraction force of 332 N was necessary for the uncoated blocks. Anchorage and resistance against uprooting of the blocks coated with Plasmapore were significantly more efficient. The histological study revealed the presence of bone neoformation adhering to the implant. Quantification of this bone formation covering nearly 45% of the implant perimeter, confirmed both osteointegration of the implant perimeter, confirmed both osteointegration of the implant surfaces being in contact with the vertebral endplates and osteoconduction along the lateral surfaces. CONCLUSION: The titanium Plasmapore block enables interbody fusion due to an osteointegration of the vertebral endplates by Plasmapore coating, which was proved by the results of extraction testing and histological study. It should be taken into account that no additional bone grafts have been used and that the implant had not been forced into the spongiosa.     

Actinomycetomas in Senegal: study of 90 cases

Mycetoma is a pathological process during which eumycetomic (fungal) or actinomycotic causative agents from exogenous source produce grains. Medical treatment is available for actinomycetomas and surgery is still the main treatment for eumycetoma. We report 90 cases of actinomycetoma occuring in male adult patients coming mainly from central Senegal. Patients living far from health structures consult after a long evolution period for tumors and pains which prevent them from carrying out their activities. The three etiological agents in our patients were Actinomadura pelletieri (60 cases), Actinomadura madurae (25 cases) and Streptomyces somaliensis (5 cases). The three clinical features are inflammatory forms (75 cases) mainly due to Actinomadura pelletieri, tumoral forms (13 cases) and cystic forms (2 cases). Lesions are localized on the foot in 50% of cases and in other part of the body for the other half. Bone damage was observed in 55% of cases. 83% of the patients were cured after a one-year treatment of sulfametoxazole adminstered orally. Two patients died of visceral involvement.