Fracture resistance and 2-body wear of 3-dimensional–printed occlusal devices

Statement of problem

Polymeric material for 3-dimensional printing can be used to fabricate occlusal devices. However, information about fracture resistance and wear is scarce.

Protection of short-time enamel erosion by different tetrafluoride compounds

OBJECTIVE: This in vitro study aimed to analyse the protective effect of differently concentrated titanium (TiF(4)), zirconium (ZrF(4)) and hafnium (HfF(4)) tetrafluoride on enamel erosion. METHODS: Polished enamel surfaces of 36 bovine crowns were covered with tape leaving 4 enamel windows each 3mm in diameter exposed. The crowns were randomly assigned to six groups (each n=6) and pretreated with 4% TiF(4), 10% TiF(4), 4% ZrF(4), 10% ZrF(4), 4% HfF(4) or 10% HfF(4) for 4 min (first window), 10 min (second window) or 15 min (third window). The fourth window of each crown was not pretreated and served as control. Erosion was performed stepwise with 1% HCl (pH 2) in five consecutive intervals of each 15 s (total 75 s). Enamel dissolution was quantified by colorimetric determination of phosphate release into the acid. For each tooth, cumulative phosphate loss of enamel pretreated with one of the tetrafluoride compounds was calculated as percentage of the respective control and statistically analysed using two-way ANOVA. RESULTS: Enamel erosion was significantly reduced by TiF(4), ZrF(4) and HfF(4) application. Cumulative phosphate loss (mean % of control, 75s erosion) after 4-15 min application was significantly lower for 4% ZrF(4) (7-11%), 10% ZrF(4) (2-6%), 4% HfF(4) (11-9%) and 10% HfF(4) (12-16%) compared to 4% TiF(4) (42-27%) and 10% TiF(4) (54-33%). Only for 4% and 10% TiF(4), phosphate loss decreased with increasing duration of application, but also increased with increasing acid intervals. CONCLUSION: TiF(4), ZrF(4) and HfF(4) might protect enamel against short-time erosion, but protection was more enhanced by ZrF(4) and HfF(4) compared to TiF(4) application overtime.     

Expression of tropoelastin in human periodontal ligament fibroblasts after simulation of orthodontic force

The ability of elastic fibers to respond to mechanical stimuli suggests that they play a central role in physiological adaptation to external stimuli including application of orthodontic force. The purpose of this study was to examine the effect of external pressure simulating orthodontic force on tropoelastin gene expression in cultured human periodontal ligament fibroblasts (hPDLF). External pressure simulation was achieved by centrifugation for 10, 30, 60, 90 and 120 min of hPDLF in a horizontal microplate rotor. Semi-quantitative RT-PCR analysis of tropoelastin mRNA was performed and beta-actin was used as an internal invariant control. While centrifugal force on mRNA levels of beta-actin showed almost no change, the mRNA levels of tropoelastin increased significantly to a peak level of more than four-fold after 30 min. Thereafter, at 60 min, the mRNA levels remained at more than three-fold. After 90 min, mRNA levels decreased to control levels. The finding that no changes in mRNA levels of beta-actin occurred during the first 90 min of centrifugation validates its use as an invariant control gene in such an experimental model. This study demonstrated that tropoelastin is expressed in hPDLF and that the pressure caused significant time-dependent upregulation of the tropoelastin gene. The responsiveness of the tropoelastin gene to force shows its possible clinical importance in orthodontic tooth movement. Further studies, however, are essential in order to learn whether the high expression of the gene in vitro will also be followed by corresponding protein synthesis and deposition in vivo in the extracellular matrix (ECM) of the periodontal ligament (PDL).     

Clinical study of the internal gaps of zirconia and metal frameworks for fixed partial dentures

The aim of this clinical study was to compare the internal gaps between abutment teeth and posterior fixed partial dentures (FPDs) fabricated utilizing milled zirconia and cast gold-alloy frameworks. As part of an ongoing randomized controlled clinical trial, 32 three-unit FPDs (16 zirconia and 16 metal-ceramic) in 25 patients were randomly selected for adaptation measurements. During the bisque-stage ceramic try-in, an A-silicone impression material was placed between the abutment teeth and the framework. The internal gap, corresponding to the thickness of the replica, was measured under magnification at the following locations: cervical, axial, and occlusal (cusp-tips and central). The internal gaps of FPDs with zirconia frameworks were significantly larger in cervical, axial, and centro-occlusal regions (cervical: 189.6 ± 71.8  μ m vs. 118.6 ± 31.5  μ m; axial: 140.5 ± 38.3  μ m vs. 95.7 ± 18.1  μ m; and centro-occlusal: 192.0 ± 66.5  μ m vs. 153.1 ± 69.8  μ m). The cervical gaps next to the pontics were significantly larger compared with those of the outer walls in both types of FPDs (zirconia: mean difference 67.7 ± 114.7  μ m; metal-ceramic: mean difference 30.0 ± 71.2  μ m). Posterior three-unit FPDs incorporating milled zirconia frameworks exhibited larger internal gaps than those constructed using conventional metal-ceramic techniques.     

Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques

Objectives

The aim of this study was to test whether the load bearing capacity of anterior zirconia crowns veneered with overpressed or layered, is similar and to evaluate the failure types.

Methods

Standardized zirconia frameworks were fabricated and randomly divided into 8 groups (N = 120, n = 15 per test group). Four groups were veneered with one of the layered veneering porcelains: Zirox, GC Initial ZR, VITA VM9 or IPS e.max Ceram and the other four groups were veneered with overpressed veneering porcelains: PressX Zr, GC Initial LF, VITA PM9 or IPS e.max ZirPress. The crowns were cemented on their corresponding CoCr abutment and the specimens were loaded at an angle of 45° in a Universal Testing Machine to determine the fracture load. Data were analyzed using one-way and two-way ANOVA, followed by a post hoc Scheffé test, t-test and Weibull analysis (alpha = 0.05).

Results

Within three manufacturers of veneering porcelain, fracture load values were not statistically significant between overpressed and layered porcelain systems. Within one manufacturer of veneering porcelain, the overpressed crowns (IPS e.max ZirPress: 1519 ± 334 N) demonstrated significantly higher (p < 0.05) fracture load than that of the layered one (IPS e.max Ceram: 894 ± 160 N). Except with IPS e.max ZirPress, where exclusively only chipping of the veneering porcelain was observed, all other porcelain systems showed predominantly framework fractures together with fracture of the veneering porcelain.

Conclusion

Overpressed veneering porcelains for zirconia frameworks exhibited similar or better fracture load compared with layered ones.     

Early oral feeding after pancreatoduodenectomy enhances recovery without increasing morbidity

Objective

The aim of this study was to evaluate whether a change in the routine feeding strategy applied after pancreatoduodenectomy (PD) from nasojejunal tube (NJT) feeding to early oral feeding improved clinical outcomes.

Methods

An observational cohort study was performed in 102 consecutive patients undergoing PD. In period 1 (n = 51, historical controls), the routine postoperative feeding strategy was NJT feeding. This was changed to a protocol of early oral feeding with on-demand NJT feeding in period 2 (n = 51, consecutive prospective cohort). The primary outcome was time to resumption of adequate oral intake.

Results

The baseline characteristics of study subjects in both periods were comparable. In period 1, 98% (n = 50) of patients received NJT feeding, whereas in period 2, 53% (n = 27) of patients did so [for delayed gastric empting (DGE) (n = 20) or preoperative malnutrition (n = 7)]. The time to resumption of adequate oral intake significantly decreased from 12 days in period 1 to 9 days in period 2 (P = 0.015), and the length of hospital stay shortened from 18 days in period 1 to 13 days in period 2 (P = 0.015). Overall, there were no differences in the incidences of complications of Clavien–Dindo Grade III or higher, DGE, pancreatic fistula, postoperative haemorrhage and mortality between the two periods.

Conclusions

The introduction of an early oral feeding strategy after PD reduced the time to resumption of adequate oral intake and length of hospital stay without negatively impacting postoperative morbidity.     

Efficacy of Anti-inflammatory Agents to Improve Symptoms in Patients With Schizophrenia: An Update

Background: The inflammatory hypothesis of schizophrenia is not new, but recently it has regained interest because more data suggest a role of the immune system in the pathogenesis of schizophrenia. If increased inflammation of the brain contributes to the symptoms of schizophrenia, reduction of the inflammatory status could improve the clinical picture. Lately, several trials have been conducted investigating the potential of anti-inflammatory agents to improve symptoms of schizophrenia. This study provides an update regarding the efficacy of anti-inflammatory agents on schizophrenic symptoms in clinical studies performed so far. Methods: An electronic search was performed using PubMed, Embase, the National Institutes of Health web site http://www.clinicaltrials.gov, Cochrane Schizophrenia Group entries in PsiTri, and the Cochrane Database of Systematic Reviews. Only randomized, double-blind, placebo-controlled studies that investigated clinical outcome were included. Results: Our search yielded 26 double-blind randomized controlled trials that provided information on the efficacy on symptom severity of the following components: aspirin, celecoxib, davunetide, fatty acids such as eicosapentaenoic acids and docosahexaenoic acids, estrogens, minocycline, and N-acetylcysteine (NAC). Of these components, aspirin (mean weighted effect size [ES]: 0.3, n = 270, 95% CI: 0.06–0.537, I² = 0), estrogens (ES: 0.51, n = 262, 95% CI: 0.043–0.972, I² = 69%), and NAC (ES: 0.45, n = 140, 95% CI: 0.112–0.779) showed significant effects. Celecoxib, minocycline, davunetide, and fatty acids showed no significant effect. Conclusion: The results of aspirin addition to antipsychotic treatment seem promising, as does the addition of NAC and estrogens. These 3 agents are all very broadly active substances, and it has to be investigated if the beneficial effects on symptom severity are indeed mediated by their anti-inflammatory aspects.Key words: add-on antipsychotic therapy, aspirin, N-acetylcysteine, estrogens     

Komplikationsmanagement bei der Deszensus- und Inkontinenzchirurgie

Tension-free alloplastic slings (TFAS) have revolutionized surgery for female stress urinary incontinence for more than 20 years. The procedure is easy to perform, minimally invasive with a short operating time in an outpatient setting and has proven efficacy comparable to retropubic colposuspension. The frequency of surgery for female stress incontinence has tripled within one decade which has to have an impact on the number of complications. In contrast, sacrocolpopexy has remained the gold standard in urological prolapse surgery as none of the new techniques has reached similar efficacy or safety; however, possible complications have to be named and their causes have to be understood to maintain the highest quality of care in the future. Possible complications of TFAS are potentially underestimated with respect to prevalence and manageability. Possible complications of prolapse and incontinence surgery are presented and the underlying causes are identified. Knowledge of the pathophysiology and the cause of complications together with the results of a postoperative diagnostic work-up, allow complication management to be tailored to each individual patient. To prevent complications all conservative treatment options should have been tried preoperatively and a complete evaluation (including urodynamics) should have been carried out for every patient. Postoperative urodynamics may help to document treatment success and to identify and quantify complications.