Evaluation of Root Canal Configuration of Maxillary Molars in a Brazilian Population Using Cone-beam Computed Tomographic Imaging: An In Vivo Study

Introduction

The aim of this study was to analyze and characterize root canal morphology of maxillary molars of the Brazilian population using cone-beam computed tomographic (CBCT) imaging.

Methods

Patients referred for a CBCT radiographic examination for accurate diagnosis and treatment planning were enrolled in the study. A total of 620 healthy, untreated, fully developed maxillary first and second molars were included (314 first molars and 306 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) fused roots, and (4) primary variations in the morphology of the root canal systems.

Results

First and second molars showed a higher prevalence of 3 separate roots, mesiobuccal, distobuccal, and palatal, with 1 canal in each root (52.87% and 45.09%, respectively). Two canals in the mesiobuccal roots represented 42.63% of teeth, whereas mesiobuccal roots of second molars presented 2 canals in 34.32%. The most common anatomic variation in the maxillary first molar was related to the root canal configuration of the mesiobuccal root, whereas the root canal system of the maxillary second molar teeth showed more anatomic variables.

Conclusions

Mesiobuccal roots of maxillary molar teeth had more variation in their canal system than the distobuccal or palatal roots. The root canal configuration of the maxillary second molars was more variable than the first molars in a Brazilian population. CBCT imaging is a clinically useful tool for endodontic diagnosis and treatment planning.     

Three Root Canals in the Mesiobuccal Root of Maxillary Molars: Case Reports and Literature Review

Introduction

The knowledge of root canal anatomy is essential to ensure a successful outcome of surgical and nonsurgical root canal treatment. The aims of this article were to present 2 cases of maxillary molars with 3 mesiobuccal root canals and to review the available literature on this anatomic variation.

Methods

The first case described a nonsurgical root canal treatment of tooth #16 in a 29-year-old man with the aid of a dental operating microscope. In the second case, an extracted maxillary right first molar was scanned by a micro–computed tomographic system and reconstructed 3-dimensionally using modeling software.

Results

In both cases, the mesiobuccal root had 3 canals (type 3-2 in case I and type 3-3 in case II), whereas the distobuccal and palatal roots had a single canal. The literature review showed that the overall incidence of 3-canaled mesiobuccal roots in maxillary molars ranged from 1.3%–2.4% and that the most common root canal configuration was type 3-2.

Conclusions

Clinicians should always anticipate the presence of extra canals in maxillary molars and use all the available tools to locate and treat these.     

A Rare Root Canal Configuration of Bilateral Maxillary First Molar with 7 Root Canals Diagnosed Using Cone-beam Computed Tomographic Scanning: A Case Report

Introduction

The complexity of the root canal system of maxillary molars presents a constant challenge in the diagnosis and treatment of these teeth. This case report describes the importance of a surgical operating microscope and cone-beam computed tomographic (CBCT) imaging.

Methods

Root canal treatment of a left maxillary first molar with 3 roots and 7 canals was successfully performed. Seven canals were identified with the help of a surgical operating microscope and CBCT imaging. CBCT images also confirmed the 3 roots and 7 canals in the right maxillary first molar.

Results

CBCT images confirmed a type IV canal pattern in the distal and palatal root, whereas the mesial root had a type VIII canal pattern.

Conclusions

The use of a surgical operating microscope and CBCT imaging helps the clinician to diagnose unusual anatomy of a tooth and facilitate successful endodontic treatment.     

Analisi della morfologia radicolare e canalare di molari superiori ed inferiori in una popolazione Caucasica: studio in vivo alla CBCT

AimTo investigate the root and canal morphology of maxillary and mandibular permanent molar teeth in a Caucasian population by using Cone Beam Computed Tomography (CBCT).MethodsA total of 596 permanent molars were included. The number of roots, the number of canals per root and the root canal configurations according to the method of Vertucci were recorded.ResultsAlmost all of maxillary first molars (95.7%) had three separate roots; however, 40.3% of mesiobuccal roots had two canals (MB2). Of 157 maxillary second molars, 88.5% had three roots. Among the mesiobuccal roots, 15.1% had two canals. The majority of mandibular molars (100% of first molars, 89.4% of second molars) had two separate roots. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal.ConclusionsCBCT is an efficient method of studying root canal systems.     

Morphology of Mandibular First Molars Analyzed by Cone-beam Computed Tomography in a Korean Population: Variations in the Number of Roots and Canals

Introduction

The aim of this study was to determine the root and canal morphology of the mandibular first molars in a Korean population of Mongolian origin by retrospective analysis of a large number of cone-beam computed tomography (CBCT) images.

Methods

A total of 976 subjects with bilateral mandibular first molars were examined by using in vivo CBCT methods. The number and configuration of roots, the number of root canals, and the canal configuration based on Vertucci's classification were determined.

Results

Overall, 25.82% of examined molars had 3 roots, 73.51% had 2 roots, and 0.67% had 1 root. The incidence of fourth canal was 50.36%. A right-sided predominance was noted for extra distal roots (P < .001), whereas a left-sided predominance was observed for extra distal canals (P < .001). No significant sex-related differences were shown for their prevalence. The bilateral prevalence rate was 69.13% for extra distal roots and 78.08% for extra distolingual (DL) canals. In the mesial roots, type IV canal was the most frequent (76.86% for 2-rooted molars and 72.96% for 3-rooted molars). In the distal roots, type l was the most common (66.62% for 2-rooted molars and 99.40%–100% for 3-rooted molars). The incidence of 2 canals in distobuccal roots, first reported in this study, was 0.15%.

Conclusions

Among mandibular first molars, there is a high prevalence of a separate DL root and/or a separate DL canal, and such molars commonly have 4 canals in the Korean population. CBCT is a useful tool for determining root and canal morphology.     

上颌第一、第二恒磨牙牙根和根管系统的锥形束CT研究

目的：运用锥形束CT（CBCT）观察中国人群双侧上颌第一、第二磨牙的牙根和根管系统的解剖形态,为临床根管治疗提供依据。方法：选择200名患者的双侧上颌第一、第二恒磨牙（上颌第一恒磨牙354颗、上颌第二恒磨牙360颗）的CBCT扫描数据,使用NNT软件分析上颌第一、第二恒磨牙的牙根数、根管数、根管分型以及双侧对称情况。结果：上颌第一、第二磨牙主要为三根（99.44%和84.44%）。上颌第二磨牙的单根和双根较多见（15.28%）,其根管系统形态复杂,在根尖区有融合趋势。上颌第一磨牙的根管系统主要为3根四根管（78.97%）。上颌第二磨牙的三根管和四根管发现率接近（分别为47.37%和51.64%）。上颌第一磨牙的近颊根管系统主要根管分型为：Ⅳ型（57.79%）、Ⅱ型（19.83%）和Ⅰ型（15.58%）。上颌第二磨牙的近颊根管系统主要根管分型为：Ⅰ型（48.14%）、Ⅳ型（30.43%）和Ⅱ型（17.39%）。上颌第一、第二磨牙的远颊根和腭根主要为单根单根管,存在少量和罕见的变异。上颌第一、第二磨牙近颊根的根管数目和根管分型左右对称。结论：上颌第一磨牙近颊根管系统变异普遍存在,MB2根管为其主要的变异形式。上颌第二磨牙牙根数目和根管形态变异类型多,单根牙和双根牙的根管走向复杂多变。CBCT可以为识别根管形态提供准确依据。     

A Cone-beam Computed Tomographic Study of Root and Canal Morphology of Maxillary First and Second Permanent Molars in a Thai Population

Introduction

Understanding tooth anatomy is crucial for effective endodontic treatment. This study investigated the roots and root canal morphology of maxillary first and second permanent molars in a Thai population using cone-beam computed tomographic (CBCT) imaging.

Root canal morphology of maxillary second molars in a Saudi sub-population: A cone beam computed tomography study

IntroductionRoot morphology and canal anatomy of maxillary molars shows several complexities and variations. Knowledge of these is essential for successful endodontic treatment. This study aimed to investigate the morphology of the maxillary second molars in a Saudi Arabian sub-population in relation to gender, age, and nationality, as well as to analyze the anatomical symmetry between the left and right side in each individual.Methodology420 digitized cone-beam computed tomography (CBCT) scans were collected, of which 351 scans met the inclusion criteria. Number of roots and canals at three different levels of the root in each case was counted at all available sides and compared on the basis of the study variables. Statistical significance was set at P ≤ 0.05.ResultsMost of the patients (n = 323, 92%) had three roots, while two roots (n = 23, 6.6%), four roots (n = 4, 1.1%), and one root (n = 1, 0.3%) were less frequently observed. A significant correlation between female patients and the presence of two canals, while male patients showed a higher correlation with the presence of four canals at all levels. There also was a correlation between Saudi participants and the presence of four canals at all levels. No significant correlation in symmetry between the left and right side root canal anatomy was found. There was an inverse relation between the number of canals and age.ConclusionConsidering the limitations in this study, it appears that the Saudi population is more likely to have three- and two-rooted maxillary second molars, with males and females showing greater tendencies to having three and two roots, respectively.     

Root and Root Canal Morphology in Maxillary Second Molar with Fused Root from a Native Chinese Population

Introduction

Root fusion is an anatomic variation in maxillary second molars (MSMs); however, the nature of this canal morphology as it relates to its root anatomy has not been fully clarified. The purpose of this study was to investigate the relationship between features of fused roots and root canal anatomy in MSMs using micro–computed tomographic imaging.

Methods

One hundred eighty-seven extracted MSMs were scanned with the μCT50 (Scanco Medical, Bassersdorf, Switzerland), and their root and canal morphology was classified and analyzed using the classifications proposed by Yang and Vertucci. The number and position of canals that merged were recorded and compared among different root fusion types.

Results

One hundred eight (57.75%) MSMs had 3 separate roots, and 79 (42.25%) had fused roots. Of the 79 fused roots, 22 showed partial canal merging, and 6 had complete canal merging. Canal merging was found with teeth with 3-root fusion more often than in those with 2-root fusion (P < .05). Of 28 merged canals, 16 occurred between mesiobuccal and distobuccal canals and 9 among mesiobuccal, distobuccal, and palatal canals.

Conclusions

MSMs with fused roots may present a complicated root canal system as a result of canal merging.     

Evaluation of root canal morphology of human primary molars by using CBCT and comprehensive review of the literature

Objective Knowledge of primary tooth morphology is essential for clinical dentistry, especially for root canal treatment and dental traumatology. However, this has not been well documented to date with a large sample. This study was carried out to investigate the variation in number and morphology of the root canals of the primary molars, to study the applicability of cone beam computerized tomography (CBCT) in assessing the same and to provide a comprehensive review of the literature. Materials and methods A total of 343 primary molars, without any root resorption, were divided into four main groups including the maxillary first molars, maxillary second molars, mandibular first molars and mandibular second molars. All of them were analysed in CBCT images in the axial, sagittal and coronal planes. Various parameters such as the number of roots, number of canals, the root canal type, diameter of root and root canal and root canal curvature were studied. Results Primary molars in all four groups showed variability in the number of roots and root canals. As far as length of the roots was concerned, the palatal root of the maxillary molar was found to be longest, while the distobuccal root was shortest. In mandibular molars, the mesial root was longer than the distal root. The length of distobuccal root canal of the maxillary molars and the distolingual canal of the mandibular molars was found to be shortest. The number of roots and root canals varied from two to four and three to four, respectively. The maxillary molars exhibited more one-canal than two-canal roots. Conclusion The present study provides comprehensive information to the existing literature concerning the variation in root canal morphology of the maxillary and mandibular primary molar teeth. These data may help clinicians in the root canal treatment of these teeth.     

Root and canal morphology of Thai maxillary molars

AIM: To investigate the root and canal morphology of 268 maxillary permanent molars collected from an indigenous Thai population. METHODOLOGY: The cleaned teeth were accessed, the pulp dissolved by sodium hypochlorite under ultrasonication, and the pulp system injected with Indian ink. The teeth were rendered clear by demineralization and immersion in methyl salicylate. The following observations were made: (i) number of roots and their morphology; (ii) number of root canals per root; (iii) root-canal configuration in each root using Vertucci's classification with additional modifications; and (iv) presence and location of lateral canals and intercanal communications. RESULTS: All the maxillary first and second molars had three separate roots. Only, half (51%) of the maxillary third molars had three separate roots; the other half had fused or conical roots. The majority of the distobuccal (98.1-100%) and palatal (100%) roots had type I canals. Over half of the mesiobuccal roots of first (65%) and second (55%) molars had two canals. The most common (44.2%) canal configuration in mesiobuccal roots of first molars was type IV (two canals, two foramina). A variety of canal types were found in the mesiobuccal roots of second molars. Maxillary third molars showed the greatest diversity of canal morphology. There was an increase in the prevalence of lateral canals towards the apical part of the roots and intercanal communications were present in 16% of each of first, second and third Thai maxillary molars. CONCLUSIONS: The mesiobuccal roots of Thai maxillary molars possessed a variety of canal system types. Over 50% of the first molars had a second mesiobuccal canal. The palatal and distobuccal canals mainly had type I canals. Only, a small proportion (7.3-13.3%) of the roots exhibited lateral canals which were the most common in the apical third     

Analisi alla Cone Beam Computed Tomography della simmetria anatomica in molari superiori ed inferiori

AimTo analyze the symmetry in root canal configurations in the maxillary and mandibular permanent molar teeth of a Caucasian population using Cone Beam Computed Tomography (CBCT).ResultsOf 45 patients who had both maxillary first molars, 32 (71.1%) had perfect symmetry in the root and canal morphology of homonym teeth on the opposite side. As regards the maxillary second molars, the symmetry was observed in 43 patients (79.6%) of 54. Of 34 patients who had both mandibular first molars, 24 (70.6%) showed a perfect symmetry in the root and canal morphology of homonym teeth on the opposite side. As regards the mandibular second molars, the symmetry was observed in 47 patients (81%) of 58.ConclusionsCBCT is an exciting and clinically useful tool in studying root canal morphology and so the symmetry between homonym teeth.     

Analysis of C-shaped Canals by Panoramic Radiography and Cone-beam Computed Tomography: Root-type Specificity by Longitudinal Distribution

Introduction

The purpose of this study was to document the characteristics of C-shaped canal systems in permanent mandibular second molars using a combination of orthopantomogram (OPT) and cross-sectional cone-beam computed tomographic (CBCT) imaging.

Methods

Two hundred participants (94 men and 106 women, mean age = 35 years) who underwent both routine CBCT and OPT examinations were enrolled. One endodontist and 1 oral radiologist examined the images of 339 mandibular second molars and described the radiographic features of C-shaped canals from OPT images as confirmed by CBCT imaging. Root morphology was classified as nonfused (NFRI–II) or fused (FRI–III) based on OPT images. Cross-sectional root canal configurations (C1–C5) were identified from CBCT imaging at 3 different levels (coronal, middle, and apical). Frequency distributions of root morphology and root canal configurations were compared at each level, and interobserver reliability was tested using the Cohen kappa test.

Results

Of the 339 teeth, 29 (8.6 %) had C-shaped root canal systems. Most of the root canals were NFR type (86%); only 2% had C-shaped root canals (all NFRII). In the FR category, 23 teeth with C-shaped canals were equally distributed between the FRI and FRII subtypes. Interobserver agreement was almost perfect (κ = 0.89 and κ = 0.91; right and left second molars, respectively). Per CBCT imaging, the most common configuration was C3 at all levels; no C5 case was detected.

Conclusions

OPT usage can assist in recognizing and diagnosing C-shaped root canal systems. Radicular fusion or proximity is a characteristic feature of C-shaped canal systems. However, nonfused root appearances should also be considered suspicious.     

Correlation of Root Dentin Thickness and Length of Roots in Mesial Roots of Mandibular Molars

Introduction

The purpose of this study was to analyze the relation of tooth length and distal wall thickness of mesial roots in mandibular molars at different locations (ie, 2 mm below the furcation and at the junction between the middle and apical third).

Methods

Forty-five mandibular first molars were taken, and the length of each tooth was measured. Then, specimens were divided into three groups according to their length: group I–long (24.2 mm ± 1.8), group II–medium (21 mm ± 1.5) and group III–short (16.8 mm ± 1.8). mesial root of each marked at two levels - at 2 mm below the furcation as well as at junction of apical and middle third of roots. The minimum thickness of the distal root dentine associated with the buccal and lingual canals of the mesial roots was measured, The distance between the buccal and lingual canals and the depth of concavity in the distal surface of the mesial roots were also measured.

Results

Statistical analysis was performed by using analysis of variance and the Student-Newman-Keuls test. The minimum thickness of the distal wall of the mesiobuccal canal was significantly different (P < .001) between groups 1 (long) and 3 (short).

Conclusions

Distal wall thickness of the mesiobuccal root and distal concavity of the mesial root of mandibular first molars were found to be thinner in longer teeth compared with shorter teeth.     

新疆地区人群上颌第二磨牙牙根和根管形态的CBCT研究

目的 采用锥形束CT研究新疆地区人群上颌第二磨牙的牙根和根管形态，为本地区口腔临床诊疗提供参考依据。方法 对纳入研究的539例新疆地区人群的上颌第二磨牙，利用CBCT对其牙根形态、数目，根管形态、数目和弯曲度，牙冠颊舌径和近远中径以及对称性进行观察、分析和统计。结果 在1017颗上颌第二磨牙中，三根牙的检出率最高为85.2%，四根牙检出率最低为3.2%，不同牙位和性别在牙根形态上的分布存在统计学差异；MB2的检出率与年龄无统计学差异；56岁及以上年龄组的四根牙检出率最高。颊舌径、近远中径的平均测量值越大，其对应的根管数目越多。上颌第二磨牙的牙根数目和形态对称、根管形态及四种特征均对称方面较高，上颌第二磨牙近颊根管和远颊根管68%为重度弯曲，弯曲位于根中1/3较多。结论 新疆地区人群上颌第二磨牙以三根牙为主，对称率较高，弯曲程度大，但存在一些牙根和根管的变异，临床上可以运用CBCT来指导诊疗。     

Root Canal Morphology of South Asian Indian Mandibular Premolar Teeth

Introduction

The purpose of this study was to study the root canal morphology of South Asian Indian mandibular premolars using a tooth clearing technique.

Methods

Two hundred mandibular premolar teeth were collected from different dental schools and clinics in India. After pulp tissue removal and root canal staining with Indian ink, the specimens were decalcified with 5% nitric acid, dehydrated in ethyl alcohol, and subsequently cleared in methyl salicylate.

Results

Of the 200 mandibular premolars, 100 were first premolars and 100 were second premolars. Of the first premolars, 94% had a single root, whereas 6% were 2 rooted. Seventy-six percent had a single canal, 22% had 2 canals, and 2% had 3 canals. Eighty-two percent had a single apical foramen, 16% had 2 foramens, and 2% teeth had 3 apical foramens. Eighty percent of teeth had type I, 6% had type II, 10% had type IV, 2% had type V, and 2% teeth had type IX root canal anatomy. Of the 100 second premolars, 92% had a single root, whereas 8% teeth were 2 rooted and fused. Fifty-eight percent of teeth had a single canal, and 42% had two canals. Eighty-eight percent had a single apical foramen, and 12% had 2 foramens. Sixty-six percent had type I, 30% had type II, and 4% had type V root canal anatomy.

Conclusions

A high prevalence of 2 canals was noted in the first and second premolars. Also, 20% of first premolars and 34% of second premolars had a root canal anatomy other than type I.     

Comparative Study of Different Novel Nickel-Titanium Rotary Systems for Root Canal Preparation in Severely Curved Root Canals

Introduction

We compared the effects of 6 different rotary systems on transportation, canal curvature, centering ratio, surface area, and volumetric changes of curved mesial root canals of mandibular molar via cone-beam computed tomographic (CBCT) imaging.

Methods

Mesiobuccal root canals of 120 mandibular first molars with an angle of curvature ranging from 20°–40° were divided into 6 groups of 20 canals. Based on CBCT images taken before instrumentation, the groups were balanced with respect to the angle and radius of canal curvature. Root canals were shaped with the following systems with an apical size of 25: OneShape (OS) (MicroMega, Besancon, France), ProTaper Universal (PU) F2 (Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Next X2 (Dentsply Maillefer), Reciproc (R) R25 (VDW, Munich, Germany), Twisted File Adaptive (TFA) SM2 (SybronEndo, Orange, CA), and WaveOne primary (Dentsply Tulsa Dental Specialties, Tulsa, OK). After root canal preparation, changes were assessed with CBCT imaging. The significance level was set at P = .05.

Results

The R system removed a significantly higher amount of dentin than the OS, PU, and TFA systems (P < .05). There was no significant difference among the 6 groups in transportation, canal curvature, changes of surface area, and centering ratio after instrumentation.

Conclusions

The 6 different file systems straightened root canal curvature similarly and produced similar canal transportation in the preparation of mesial canals of mandibular molars. R instrumentation exhibited superior performance compared with the OS, TFA, and PU systems with respect to volumetric change.     

Root and canal morphology of permanent mandibular molars in a Sudanese population

AIM: To investigate variations in the root canal systems of first and second permanent mandibular molar teeth in a Sudanese population using a clearing technique. METHODOLOGY: Two hundred extracted first and second permanent mandibular molars from three cities in the state of Khartoum were studied. Access cavities were prepared and pulp tissue was removed by immersion in 5% sodium hypochlorite under ultrasonication; Indian ink was then injected into the root canal systems assisted by a vacuum applied apically. The teeth were rendered clear by demineralization and immersion in methyl salicylate before evaluation. The following observations were made (i) number of roots and their morphology; (ii) number of root canals per tooth; (iii) number of root canals per root and (iv) root canal configuration. RESULTS: Overall 59% of mandibular first molars had four canals with 3% having a third distolingual root. Seventy-eight per cent of second mandibular molars had two separate flat roots, whilst 10% were C-shaped. The most common canal system configurations were type IV (73%) and type II (14%). Inter-canal communications were more common in the mesial roots. The prevalence of inter-canal communications was 65% in first molars and 49% in second molars. CONCLUSIONS: In this sample of Sudanese teeth, 59% of the mandibular first permanent molars had four root canals whilst 10% of the mandibular second molars had C-shaped roots/canals.     

应用锥形束CT研究下颌第二磨牙根管数目和构型

目的采用锥形束CT（cone-beam computed tomography,CBCT）观察下颌第二磨牙根管数目及构型,为根管治疗提供影像学参考。方法随机调取700颗下颌第二磨牙的CBCT资料,统计下颌第二磨牙牙根数目、根管数目和构型,以及C型根管的发生率。结果下颌第二磨牙c形牙根的发生率为36．O％;2根牙的根管构型：61．1％近中根管为Ⅳ型,96．1％远中根管为I型;C形根管在根管口及根尖1／3处类型变化多。结论下颌第二磨牙牙根和根管解剖形态多样,CBCT清晰的三维影像能为根管治疗提供参考。     

Use of cone-beam computed tomography to evaluate root and canal morphology of mandibular first and second molars in Turkish individuals

Objective: The aim of this study was to investigate the root and canal morphology of mandibular first and second molars in a Turkish population by using cone beam computed tomography (CBCT). Study design: CBCT images of mandibular first (n = 823) and second molar (n = 925) teeth from 605 Turkish patients were analyzed. The root canal configurations were classified according to the method of Vertucci. Results: The majority of mandibular molars (95.8% of first molars, 85.4% of second molars) had two separate roots; however, three roots were identified in 2.06% of first molars and 3.45% of second molars. C-shaped canals occurred 0.85% of first molars and 4.1% of second molars. Three canals were found in 79.9% of first molars and 72.8% of second molars. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal. The most common root morphology of first and second molars is the two rooted morphology with three canals. Both the mesial and distal roots showed wide variations in canal anatomy with type IV and type I canal configuration predominating in the mesial and distal roots, respectively. Conclusion: Vertucci type I and IV canal configurations were the most prevalent in the distal and mesial roots, respectively, of both the mandibular first and second permanent molar teeth. Key words:Cone-beam CT, Turkish, mandibular molars, root and canal morphology.