The sealing ability of an epoxy resin root canal sealer used with five gutta-percha obturation techniques

The purpose of the present study was to evaluate the apical sealing ability of an epoxy resin root canal sealer (AH-26) when used with different gutta-percha obturation techniques (i.e. cold lateral condensation, warm vertical condensation, hybrid condensation) and with Thermafil and Soft-Core obturators. Straight single-rooted teeth with mature apices were prepared according to the crown-down/step-back technique and divided in five groups of 45 teeth and one group of 12 control teeth. After root canal filling 15 teeth of each group were kept for 1 day, another 15 teeth for 1 week, and another 15 teeth for 4 months at 37 degrees C in vacutainers in 80% relative humidity. The 237 teeth were immersed in india ink for 90 hours, each root was split and sectioned longitudinally, and the maximum extent of leakage was measured using a stereomicroscope at x6 magnification. It became clear that leakage occurred whatever technique was combined with AH26 and that leakage increased with time. The amount of apical leakage and the number of leaking teeth in the Soft-Core obturator groups was significantly higher than all other 4 gutta-percha obturation techniques combined with AH26. In this respect, the hybrid gutta-percha condensation technique turned out to be superior to the four other condensation techniques.     

The sealing ability of an epoxy resin root canal sealer used with five gutta-percha obturation techniques

Abstract – The purpose of the present study was to evaluate the apical sealing ability of an epoxy resin root canal sealer (AH-26) when used with different gutta-percha obturation techniques (i.e. cold lateral condensation, warm vertical condensation, hybrid condensation) and with Thermafil and Soft-Core obturators. Straight single-rooted teeth with mature apices were prepared according to the crown-down/step-back technique and divided in five groups of 45 teeth and one group of 12 control teeth. After root canal filling 15 teeth of each group were kept for 1 day, another 15 teeth for 1 week, and another 15 teeth for 4 months at 37 °C in vacutainers in 80% relative humidity. The 237 teeth were immersed in india ink for 90 hours, each root was split and sectioned longitudinally, and the maximum extent of leakage was measured using a stereomicroscope at ×6 magnification. It became clear that leakage occurred whatever technique was combined with AH26 and that leakage increased with time. The amount of apical leakage and the number of leaking teeth in the Soft-Core obturator groups was significantly higher than all other 4 gutta-percha obturation techniques combined with AH26. In this respect, the hybrid gutta-percha condensation technique turned out to be superior to the four other condensation techniques.     

Outcome of root canal obturation by warm gutta-percha versus cold lateral condensation: a meta-analysis

The purpose of this study was to evaluate clinical outcome differences of root canal obturation by warm gutta-percha (GP) or cold lateral condensation (CLC) through a systematic review and meta-analysis. There were 10 clinical studies evaluated. Postoperative pain, long-term outcomes, obturation quality, and overextension were the characteristics investigated. The results suggest that the two obturation techniques are not significantly different except in overextention. The relative risk (RR) value of warm GP versus CLC and 95% confidence interval (CI) of the first three criteria were 1.10 (0.71, 1.71), 0.78 (0.58, 1.05), and 1.31 (0.98, 1.76), respectively. Overextension was more likely to occur in the warm GP obturation group in comparison with the CLC group. The RR value and 95% CI were 1.98 (1.33, 2.93). In conclusion, warm GP obturation demonstrated a higher rate of overextension than CLC. Postoperative pain prevalence, long-term outcomes, and obturation quality were similar between the two groups.     

The long-term sealing ability of an epoxy resin root canal sealer used with five gutta percha obturation techniques

AIM: The aim of the present study was to evaluate the long-term sealing ability (both apical and coronal) of an epoxy resin root canal sealer (AH26) when used with different gutta-percha obturation techniques. METHODOLOGY: Straight single-rooted teeth with mature apices were divided into 10 groups of 75 teeth and one group of 40 control teeth. Root canals were prepared according to the crown-down/step-back technique and using both 2.5% sodium hypochlorite and an EDTA paste. Root canals were obturated using cold lateral condensation, warm vertical condensation and hybrid condensation of gutta-percha; and with Thermafil and Soft-Core obturators. AH26 was used as the sealer in all cases. After root canal filling, each group was divided into five individual groups of 15 teeth. The first group of 15 teeth was kept for 1 day, the second for 1 week, the third for 4 months, the fourth for 6 months and the fifth for 12 months at 37 degrees C in vacutainers in 80% relative humidity. The teeth were immersed in India ink for 90 h, each root was split and sectioned longitudinally, and the maximum extent of leakage was measured using a stereomicroscope at x6 magnification. RESULTS: Leakage occurred whatever filling technique was combined with AH26. The number of teeth with gross leakage increased with time up to 4 months, but did not appear to increase between 6 and 12 months storage. The degree of apical leakage and the number of leaking teeth in the Soft-Core obturator groups was significantly higher than all four other gutta-percha obturation techniques. Up to 4 months the degree of coronal leakage and the number of leaking teeth in the Thermafil groups was significantly higher than the other gutta-percha obturation techniques, except for Soft-Core. In the Soft-Core obturator groups the degree of coronal leakage and the number of leaking teeth was significantly higher than the other gutta-percha obturation techniques, except for Thermafil at all evaluation times. CONCLUSION: The hybrid gutta-percha condensation technique was superior to the other four obturation techniques in respect of apical leakage. Coronal leakage was significantly greater during the first 4 months for the Thermafil system as compared to the three condensation techniques; coronal leakage was significantly greater at all time periods for the Soft-Core system. There were no significant differences between the Thermafil and the Soft-core system.     

An in vitro comparison of thermoplasticised gutta-percha obturation techniques with cold lateral condensation

Abstract— This study compared the apical sealing ability, obturation time and extrusion of gutta-percha and sealer when root canals were ohturated using either cold lateral condensation or one of the three methods using thermoplasticised gutta-percha (Alpha Seal, Thermafil or JS Quick Fill) in vitro . One hundred and thirty-one root canals from 78 extracted human teeth were used; 116 canals were divided into five groups so that they were balanced with respect to prepared canal anatomy, and the remaining 15 canals were used as positive and negative controls. The canals in the first four groups were prepared with hand files using the step-down technique to a standard apical size and flare. The last group was prepared using engine-driven rotary nickel-titanium files (McSpad-den) to a similar apical size and Hare. One of the four obturating techniques was used to fill the canals in each of the first four groups. The fifth group was obturated using the Alpha Seal technique. The roots were immersed in india ink, demineralised and rendered transparent to assess the extent of maximum linear dye penetration. The Alpha Seal groups had the highest number of specimens without any leakage. There was a significant difference in the proportions of specimens that did not leak when the Alpha Seal ( P <0.01) and cold lateral condensation groups ( P <0.05) were compared with JS Quick Fill. Cold lateral condensation had a higher proportion of specimens with leakage in canals with curvature greater than 20' than in canals with curvatures less than 20 ( P <0.05). The curvature of canals had no effect on the sealing ability of the other techniques. The method of canal preparation had no effect on the sealing ability of Alpha Seal. Alpha Seal, Thermafil andJS Quick Fill were significantly quicker to perform than cold lateral condensation.     

Comparison of a warm gutta-percha obturation technique and lateral condensation.

This study was designed to compare a warm gutta-percha obturation technique, Thermafil Plus (Tulsa Dental, Tulsa OK), with lateral condensation for the ability to adapt gutta-percha to the walls of a root canal system. An extracted sectioned and mounted maxillary central incisor had canal irregularities created and was subsequently subjected to multiple obturations using both techniques. Length of fill, replication to working length, number of artificial depressions replicated, quality of replications, number of voids, and general appearance of obturation were all evaluated using standardized criteria. Data evaluation consisted of a one way analysis of variance on the same type defects between obturation groups followed by a Scheffé post-hoc test. A statistically significant difference was found between the groups in each category of evaluation. Gutta-percha using Thermafil was better able to flow into lateral spaces, had fewer voids, and replicated the surface of the root better. It also, however, was extruded out the apical foramen more than in the lateral condensation group.     

单尖法和热牙胶法根管充填根尖封闭性能的比较研究

目的 比较3种封闭剂AH-Plus, iRoot SP和GuttaFlow2分别配合单尖法充填和热牙胶充填的根尖封闭性能。方法 选取近期拔除的70颗单根管前磨牙,截冠后采用Waveone gold系统预备至P#,随机分为6个实验组(每组10颗)和2个对照组(每组5颗)。分别行单尖法充填和热牙胶充填,即AH-Plus单尖法组(A1组),AH-Plus热牙胶组(A2组),iRoot SP单尖法组(B1组),iRoot SP热牙胶组(B2组),GuttaFlow2单尖法组(C1组),GuttaFlow2热牙胶组(C2组),阳性对照组(D组)和阴性对照组(E组)。将充填完成的牙齿进行染料渗透实验后,通过纵切片法检测根尖的微渗漏情况。结果 A1组微渗漏值最大,B2组微渗漏值最小,同种封闭剂下单尖法充填和热牙胶充填根尖封闭性差异无统计学意义(P>0.05),同种充填技术下3种封闭剂的封闭性差异无统计学意义(P>0.05)。结论 3种根管封闭剂均不能完全封闭根管,单尖法充填和热牙胶充填在根尖封闭效果上无显著差异。     

Apical dye penetration with four root canal sealers and gutta-percha using longitudinal sectioning.

The purpose of this study was to compare the level of apical dye penetration when different sealers were used with lateral condensation of gutta-percha. Fifty teeth with single root canals were biomechanically prepared using the step-back technique and irrigation with 15% ethylenediaminetetraacetic acid with cetrimide and 1% NaOCl solutions. The teeth were divided into five groups of 10 teeth each. The control group root canals were filled with laterally condensed gutta-percha without sealer and the other four groups were filled with laterally condensed gutta-percha and either Apexit, Sealapex, Tubli-Seal, or AH-26 sealer. After storage in 100% humidity at 37 degrees C for 48 h, the root surfaces were coated with nail varnish (except at the apex), placed in 2% methylene blue dye solution, and centrifuged at 30 x g for 3 min. The roots were sectioned longitudinally to determine the following mean levels of dye penetration: AH-26, 0.48 mm; Apexit, 1.33 mm; Sealapex, 4.59 mm; Tubli-Seal, 5.58 mm; and gutta-percha alone, 7.99 mm. This study demonstrated that a root canal sealer should be used in conjunction with laterally condensed gutta-percha and that AH-26 sealer had significantly less dye penetration than the other three sealers while Apexit had significantly less dye penetration than Sealapex and Tubli-Seal. There was no significant difference between Sealapex and Tubli-Seal.     

The long-term sealing ability of AH 26 and AH plus used with three gutta-percha obturation techniques.

OBJECTIVE: To evaluate and compare the sealability of root fillings in extracted teeth by using AH 26 and AH Plus in conjunction with three different obturation techniques. METHOD AND MATERIALS: Root canals of 940 single-rooted teeth were prepared according to the crown-down/stepback technique (using both 2.5% NaOCl and File-Eze) before lateral condensation and hybrid condensation of gutta percha or obturation with Thermafil. Teeth were immersed in India ink for 90 hours after storage for 1 day, 1 week, 2 weeks, 1 month, and 6 months. The roots were split longitudinally, and the extent of dye penetration was measured using a stereomicroscope. Statistical analysis was performed using Kruskal-Wallis test and Mann-Whitney U test. RESULTS: There were no statistically significant differences in apical leakage within the AH 26 and the AH Plus groups, nor between the two sealer groups, at any observation period. Coronal leakage was significantly higher for Thermafil compared to hybrid condensation at 1 day, 1 week, and 2 weeks both for AH 26 and AH Plus. Coronal leakage was higher only for Thermafil compared to lateral condensation at 1 week for AH 26 and for lateral condensation compared to hybrid condensation at 1 week for AH Plus. CONCLUSION: Both AH 26 and AH Plus, when used with an identical gutta-percha obturation technique, resulted in comparable sealability at all evaluation times and in comparable coronal sealability at 1 and 6 months.     

Effect of gutta-percha solvents on the bond strength of two resin-based sealers to root canal dentin

Objective. To evaluate the effect of two gutta percha solvents on the bond strength of two resin-based sealers to root canal dentin. Materials and methods. Root canals of extracted single rooted human mandibular premolars (n = 60) were decoronated and instrumented with a rotary NiTi system to an apical size of 40 and randomly divided into three groups (n = 20) based on the chemical treatment: Group I, saline (control); group II, Xylene and group III, Endosolv E. All groups were divided into two sub-groups (n = 10) based on the root filling material: sub-group A, epoxy resin sealer (AH Plus); sub-group B, methacrylate resin sealer (Epiphany). Roots were then sectioned and push-out tests were performed. The data was analysed using two-way analysis of variance (ANOVA) and a multiple comparison test (p = 0.05). Results. There was a significant difference in bond strength of both sealers between the control and test groups (p < 0.05). The bond strength of the epoxy resin sealer (sub-group A) in group II was significantly lower than in group III (p < 0.05). However, there was no significant difference between groups II and III for the methacrylate resin sealer (sub-group b) (p > 0.05). Conclusions. Gutta Percha solvents had an adverse effect on bond strengths of resin sealers to root canal dentin. This was dependent on the chemistry of the solvent and the sealer.     

Efficacy and retrievability of root canal filling using calcium silicate‐based and epoxy resin‐based root canal sealers with matched obturation techniques

This study aimed to compare the efficiency of root canal filling procedures and the retrievability of the filling material with various sealers. Forty‐three patients assigned to endodontic treatment with (i) continuous wave of condensation technique (CTW) with AH‐plus (ii) single‐cone technique (SCT) with EndoSeal MTA. The spent time, voids entrapping and postoperative symptoms were evaluated. To evaluate the retrievability, mandibular premolar (n = 60) were divided into four groups: AH‐plus/CTW, EndoSeal MTA/SCT, MTA Fillapex/SCT and EndoSequence BC Sealer/SCT. The time required removing the filled materials and remnant score were examined. EndoSeal MTA/SCT showed significantly shorter time of filling procedure. The number of void did not show significant differences between two techniques. No patients showed clinical signs during the follow‐up periods. There were no significant differences between group AH‐plus and EndoSeal MTA for remnant score. A certain calcium silicate‐based sealer with SCT may give similar clinical efficiencies as much as continuous‐wave technique using AH‐plus sealer.     

Apical placement of needle tip with an injection-thermoplasticized gutta-percha technique for root canal obturation

It is recommended that when injection-thermoplasticized gutta-percha is used as the obturation technique, the root canal space should be prepared in such a way that the 23-gauge injection needle tip can be placed at a distance 3 to 5 mm short of the working length. In this study the apical seal and extent of gutta-percha were evaluated when the 23-gauge tip was placed at a distance 4 mm, 6 mm, and 8 mm short of the working length. Ninety-nine human single-rooted mandibular incisors and premolars divided into 3 equal groups were used. Their crowns were separated at the cementoenamel junction and their roots were stored in sodium hypochlorite for 1 week. The roots were then instrumented from size 20 at the working length to size 70:4 mm short of the working length in group A, 6 mm in group B, and 8 mm in group C. Following instrumentation, 3 randomly selected roots of each group were used as control. The remaining 30 roots of each group were covered with aluminium foil and embedded in acrylic blocks. The root canals were then dried, coated with sealer (Roth 811) and obturated by injection of thermoplasticized gutta-percha using the single-phase technique. Vertical condensation followed. The roots were immersed in dye for 3 days and then demineralized, dehydrated and cleared in xylene. Measurements of linear dye penetration for the apical seal and for underextension were done by 2 independent examiners under a stereomicroscope. The results of this study showed no statistically significant difference in leakage between the groups.(ABSTRACT TRUNCATED AT 250 WORDS)     

Apical placement of needle tip with an injection-thermoplasticized gutta-percha technique for root canal obturation

Abstract It is recommended that when injection-thermoplasticized gutta-percha is used as the obturation technique, the root canal space should be prepared in such a way that the 23-gauge injection needle tip can be placed at a distance 3 to 5 mm short of the working length. In this study the apical seal and extent of gutta-percha were evaluated when the 23-gauge tip was placed at a distance 4 mm, 6 mm, and 8 mm short of the working length. Ninty-nine human single-rooted mandibular incisors and premolars divided into 3 equal groups were used. Their crowns were separated at the cementoenamel junction and their roots were stored in sodium hypochlorite for 1 week. The roots were then instrumented from size 20 at the working length to size 70:4 mm short of the working length in group A, 6 mm in group B, and 8 mm in group C. Following instrumentation, 3 randomly selected roots of each group were used as control. The remaining 30 roots of each group were covered with aluminium foil and embedded in acrylic blocks. The root canals were then dried, coated with sealer (Roth 811) and obturated by injection of thermoplasticized gutta-percha using the single-phase technique. Vertical condensation followed. The roots were immersed in dye for 3 days and then demineralized, dehydrated and cleared in xylene. Measurements of linear dye penetration for the apical seal and for underextension were done by 2 independent examiners under a stereomicroscope. The results of this study showed no statistically significant difference in leakage between the groups. However, statistically significant differences were found in linear underextension between groups A and C as well as between groups B and C, while no significant difference was found between groups A and B.     

Coronal sealing ability of three sectional obturation techniques--SimpliFill, Thermafil and warm vertical compaction--compared with cold lateral condensation and post space preparation

The purpose of this study was to evaluate the effect post space preparation has on the coronal seal of root canals obturated with cold lateral condensation of gutta-percha compared with the corsonal sealing ability of three sectional obturation techniques not requiring post space preparation. Sixty-eight human maxillary central incisors were divided equally into four groups: cold lateral condensation (Group I), SimpliFill (Group II), Thermafil (Group III) and warm vertical compaction (Group IV). After coronal flaring, all four groups were cleaned and shaped with Lightspeed rotary instruments to a size 60 master apical rotary. After obturation Peeso Reamers were used to create a post space for Group I, while Groups 2, 3 and 4 incorporated the post space in the obturation (sectional technique) and did not require making a post space after obturation. The teeth were then stored in 100% humidity for 1 week and then kept in rhodamine B fluorescent dye for 3 weeks. The teeth were then split open, and the linear dye penetration from a coronal to apical direction (coronal seal) was evaluated with a fluorescent light microscope. Statistical analysis showed that Group I (cold lateral condensation followed by post space made with Peeso Reamers) leaked significantly more (P < 0.05) than the remaining three sectional obturation groups. It was concluded that stresses generated during post space preparation might be detrimental to the seal obtained by the obturation. Sectional obturations with their superior sealing ability offer a viable alternative.     

AH plus和iRoot SP用于热牙胶充填的根尖封闭性能研究

目的 利用体外模型比较热牙胶充填时,2种根管封闭剂AH plus和iRoot SP的根尖微渗漏情况,评估两种材料的根尖封闭性能.方法 离体牙30颗,根管预备后,随机分为2个实验组A和B,1个阳性对照组(C)和1个阴性对照组(D).其中实验组每组10颗离体牙,对照组每组5颗离体牙.分别选用AH plus(A组)和iRoo...     

An in vitro evaluation of the apical sealing ability of a new resin-based root canal obturation system

The purpose of this study was to assess the apical sealing ability of the new resin-based Epiphany-Resilon root canal filling system, and to compare this with the sealing abilities of different pairings of AH plus, gutta-percha, Epiphany, and Resilon. Seventy extracted human single-rooted teeth were used. All teeth were instrumented using a set of ProTaper rotary instruments. The canal spaces were filled with different combinations of core and sealer using lateral condensation, as follows: group 1, AH Plus + gutta-percha; group 2, AH Plus + Resilon; group 3, Epiphany + Resilon; group 4, Epiphany + gutta-percha. Apical leakage quantity was measured with the computerized fluid filtration meter. Statistical analysis indicated that Epiphany gutta-percha combination had the least amount of microleakage than all the other groups; AH Plus gutta-percha combination proved to have second least amount of microleakage among the groups. AH Plus-Resilon combination demonstrated the greatest amount of microleakage. There were a significant difference between Epiphany gutta-percha and AH Plus-Resilon combinations (p < 0.05). It was found that there were no significant differences between Epiphany-Resilon combination and all the other groups (p > 0.05).     

不同根管充填技术对椭圆形根管的根尖封闭效果

目的 探讨采用不同根管充填技术对椭圆形根管根尖封闭效果的影响.方法 选取近期拔除的椭圆形单根管前磨牙120颗随机分成6组,每组20颗,采用iRoot-SP和AH-Plus根管封闭剂,结合单尖充填法、连续波热牙胶垂直加压充填法、冷牙胶侧方加压充填法,即单尖iRoot组、热牙胶iRoot组、冷牙胶iRoot组、单尖AH组、热牙胶AH组、冷牙胶AH组,采用染料渗透法观察根尖的微渗漏情况.结果 热牙胶iRoot组、热牙胶AH组的根尖染料渗入深度明显小于单尖iRoot组、单尖AH组(P<0.05);热牙胶iRoot组、冷牙胶iRoot组尖染料渗入深度明显小于热牙胶AH组、冷牙胶AH组(P<0.05);其他的组间两两比较差异均无统计学意义(P>0.05).结论 热牙胶垂直加压技术可以使椭圆形根管达到更好的根尖封闭效果,且配合使用iRoot SP根管封闭剂的封闭效果较配合使用AH-Plus根管封闭剂好.     

Effect of canal taper and plugger size on warm gutta-percha obturation of lateral depressions

This study used transparent epoxy-resin root canal models to evaluate different main root canal tapers and various methods of vertical compaction for warm gutta-percha obturation of lateral depressions. The root canal models had straight main root canals with three tapers and four lateral depressions at right angles to the main root canal, 1.0 mm and 3.0 mm from the apex. Three types of experimental stainless steel pluggers with different flat-tip diameters and tapers were used to compact the warm gutta-percha. The Obtura II was used for obturation. After obturation, the depth of penetration into lateral depressions was measured under a stereoscopic microscope, and the effects of root canal taper and plugger size were analyzed by using two-way analysis of variance. The penetration of warm gutta-percha into lateral depressions using the smallest-diameter plugger decreased with increasing main root canal taper. Penetration into lateral depressions increased with the use of pluggers of the correct size. There was a close relationship between plugger size and canal taper. The results suggest that main root canal taper and plugger size should be closely matched so as to promote gutta-percha obturation of lateral depressions.     

GuttaFlow充填系统根管封闭性能初探

目的评价GuttaFlow常温流动牙胶充填系统的根管封闭性能。方法30颗单根管牙沿釉牙骨质界截冠,采用冠向下法,使用ProTaper机用镍钛系统预备根管。随机分为3组,每组10颗,分别以GuttaFlow充填系统、冷侧压充填法、连续波热塑牙胶充填术充填根管。采用葡萄糖定量法测定第2、7、14、21、28天从冠方向根方渗漏的葡萄糖量。结果从实验第21天起,GuttaFlow充填系统的葡萄糖渗漏量要明显低于冷侧压充填法(P<0.05),而与连续波热塑牙胶充填术相比没有统计学差异(P>0.05)。结论GuttaFlow充填系统在观测期内具有较好的根管封闭性能。     

The influence of root canal shape on the sealing ability of two root canal sealers

AIM: To evaluate the influence of root canal form on the sealing ability of two root canal sealers. METHODOLOGY: Twenty radiographically confirmed straight and 20 curved root canals were prepared with a stepback hand filing technique. Root canal aberrations created during preparation were determined by the use of double exposure radiographic technique. The prepared canals were filled with lateral condensation of gutta-percha and one or other of two root canal sealers (Pulp Canal Sealer and Sealapex). Leakage along the apical 10 mm of roots was measured with a fluid transport model at 1, 3, 6, 9 and 12-month intervals. RESULTS: There were no statistically significant differences between straight and curved root canals (P > 0.05) for prevalence of root canal transportation. The prevalence of apical transportation was 80% in the straight and 85% in the curved root canals. A complete seal was more frequently observed in straight canals compared with curved canals. Utilizing the pi* index, analysis showed the filling with Sealapex allowed more leakage than Pulp Canal Sealer at 1 year. CONCLUSION: Under the conditions of the study, root canal form influenced short-term sealing ability. In the long-term the seal was affected by the sealer rather than root canal form.