In vivo cultivation of human articular chondrocytes in a nude mouse-based contained defect organ culture model

The nude mouse model is an established method to cultivate and investigate tissue engineered cartilage analogues under in vivo conditions. One limitation of this common approach is the lack of appropriate surrounding articular tissues. Thus the bonding capacity of cartilage repair tissue cannot be evaluated. Widely applied surgical techniques in cartilage repair such as conventional and three-dimensional autologous chondrocyte implantation (ACI) based on a collagen gel matrix cannot be included into nude mouse studies, since their application require a contained defect. The aim of this study is to apply an organ culture defect model for the in vivo cultivation of different cell-matrix-constructs.Cartilage defects were created on osteochondral specimens which had been harvested from 10 human knee joints during total knee replacement. Autologous chondrocytes were isolated from the cartilage samples and cultivated in monolayer until passage 2. On each osteochondral block defects were treated either by conventional ACI or a collagen gel seeded with autologous chondrocytes, including a defect left empty as a control. The samples were implanted into the subcutaneous pouches of nude mice and cultivated for six weeks. After retrieval, the specimens were examined histologically, immunohistochemically and by cell morphology quantification.In both, ACI and collagen gel based defect treatment, a repair tissue was formed, which filled the defect and bonded to the adjacent tissues. The repair tissue was immature with low production of collagen type II. In both groups redifferentiation of chondrocytes remained incomplete. Different appearances of interface zones between the repair tissue and the adjacent cartilage were found.The presented contained defect organ culture model offers the possibility to directly compare different types of clinically applied biologic cartilage repair techniques using human articular tissues in a nude mouse model.     

环境、材料、安全、可控：组织工程技术修复关节软骨的症结*

背景：传统的软骨缺损的修复方法都有其局限性,组织工程技术的出现从根本上改变了“以创伤修复创伤”的传统治疗模式。 目的：总结分析目前组织工程技术修复关节软骨的研究进展。 方法：由第一作者检索1990年至2011年 PubMed数据及中国知网数据库有关应用组织工程技术修复关节软骨方面的文献。共检索中文187 篇,英文211 篇,最终保留49篇进入结果分析。 结果与结论：软骨组织工程的主要方法就是应用工程学和生命科学原理,在体外分离、培养、扩增所需要的种子细胞,然后将之种植于合适的生物支架材料上,将细胞支架复合体植入体内组织缺损部位,并加入一定的诱导条件,逐渐形成新的有功能的软骨组织。文章在种子细胞的选择方面重点叙述了自体软骨细胞、异体软骨细胞、胚胎干细胞、骨髓间充质干细胞的研究进展;在细胞诱导及条件培养方面重点叙述了细胞因子、细胞条件培养、转基因技术的研究进展;并对生物支架材料的选择和研究进行了相关叙述。找到最理想的种子细胞,合理联合应用细胞因子,更加真实的模拟细胞生存的微环境,基因工程安全、高效、可控转染,构建理想的支架材料,将是今后组织工程研究的重点和热点。     

A Paradigm for Functional Tissue Engineering of Articular Cartilage via Applied Physiologic Deformational Loading

Deformational loading represents a primary component of the chondrocyte physical environment in vivo. This review summarizes our experience with physiologic deformational loading of chondrocyte-seeded agarose hydrogels to promote development of cartilage constructs having mechanical properties matching that of the parent calf tissue, which has a Young's modulus E(Y) = 277 kPa and unconfined dynamic modulus at 1 Hz G* = 7 MPa. Over an 8-week culture period, cartilage-like properties have been achieved for 60 x 10(6) cells/ml seeding density agarose constructs, with E(Y) = 186 kPa, G* = 1.64 MPa. For these constructs, the GAG content reached 1.74% ww and collagen content 2.64% ww compared to 2.4% ww and 21.5% ww for the parent tissue, respectively. Issues regarding the deformational loading protocol, cell-seeding density, nutrient supply, growth factor addition, and construct mechanical characterization are discussed. In anticipation of cartilage repair studies, we also describe early efforts to engineer cylindrical and anatomically shaped bilayered constructs of agarose hydrogel and bone (i.e., osteochondral constructs). The presence of a bony substrate may facilitate integration upon implantation. These efforts will provide an underlying framework from which a functional tissue-engineering approach, as described by Butler and coworkers (2000), may be applied to general cell-scaffold systems adopted for cartilage tissue engineering.     

微球化人脐带Wharton胶间充质干细胞移植裸鼠皮下构建异位软骨

背景：软骨细胞外基质具有众多的信号分子蛋白和因子,其成分和特性最接近天然软骨组织,因而其很可能是构建组织工程软骨的最理想原料。 目的：探讨海藻酸钙-软骨细胞外基质混合凝胶微球复合人脐带Wharton胶间充质干细胞在裸鼠皮下异位构建组织工程软骨的可行性。 方法：制备软骨细胞外基质微丝悬液,将人脐带Wharton胶间充质干细胞接种于海藻酸钙-软骨细胞外基质混合凝胶微球中体外培养后植入裸鼠背部皮下(实验组),以人脐带Wharton胶间充质干细胞混合于单纯藻酸盐凝胶微球作为对照组,于4周后取材进行大体和组织学苏木精-伊红、甲苯胺蓝、番红O及Ⅱ型胶原免疫组化观察。 结果与结论：体外培养时微球中干细胞呈球形软骨细胞样形态,生长、增殖情况良好;实验组术后第4周取材可见外形呈类软骨样组织块,甲苯胺蓝、番红O及Ⅱ型胶原免疫组化染色阳性,镜下观察可见大量类软骨样细胞及类软骨陷窝样结构,植入的混合凝胶微球周围组织无明显炎症反应;对照组显示微球部分降解,周围仅有少量炎症细胞及淋巴细胞。结果可见海藻酸钙-软骨细胞外基质具有良好的组织相容性,复合干细胞形成的微球植入裸鼠皮下可以构建为类软骨样组织。中国组织工程研究杂志出版内容重点：生物材料;骨生物材料; 口腔生物材料; 纳米材料; 缓释材料; 材料相容性;组织工程全文链接：     

Maturation and integration of tissue-engineered cartilages within an in vitro defect repair model

This study compared the behavior of four different engineered cartilages in a hybrid culture system. First, the growth and maturation of tissue-engineered cartilages in isolation were compared to those grown in an in vitro articular cartilage defect repair model. Tissue-engineered cartilages using fibrin, agarose, or poly(glycolic acid) scaffolds were implanted into annular explants of articular cartilage and cultured for 20 or 40 days. Native tissue had a substantial influence on the DNA, sulfated glycosaminoglycan, and hydroxyproline content of the engineered tissues, suggesting that the presence of living tissue in the culture significantly altered cell proliferation and matrix accumulation. Second, the adhesion strength of various engineered cartilages to native tissue was measured and compared with the biochemical content of the engineered tissues. All scaffold treatments adhered to the native cartilage, but there were statistically significant differences in adhesive strength between the different scaffolds. The adhesive strength of all engineered scaffolds was significantly lower than that of native tissue to itself. In the engineered tissues, neither failure stress nor energy to failure correlated with gross biochemical content, suggesting that adhesion between native and engineered tissues is not purely a function of gross matrix synthesis.     

Cartilage repair in transplanted scaffold-free chondrocyte sheets using a minipig model

Lacking a blood supply and having a low cellular density, articular cartilage has a minimal ability for self-repair. Therefore, wide-ranging cartilage damage rarely resolves spontaneously. Cartilage damage is typically treated by chondrocyte transplantation, mosaicplasty or microfracture. Recent advances in tissue engineering have prompted research on techniques to repair articular cartilage damage using a variety of transplanted cells. We studied the repair and regeneration of cartilage damage using layered chondrocyte sheets prepared on a temperature-responsive culture dish. We previously reported achieving robust tissue repair when covering only the surface layer with layered chondrocyte sheets when researching partial-thickness defects in the articular cartilage of domestic rabbits. The present study was an experiment on the repair and regeneration of articular cartilage in a minipig model of full-thickness defects. Good safranin-O staining and integration with surrounding tissues was achieved in animals transplanted with layered chondrocyte sheets. However, tissue having poor safranin-O staining-not noted in the domestic rabbit experiments-was identified in some of the animals, and the subchondral bone was poorly repaired in these. Thus, although layered chondrocyte sheets facilitate articular cartilage repair, further investigations into appropriate animal models and culture and transplant conditions are required.     

Cyclic compression maintains viability and induces chondrogenesis of human mesenchymal stem cells in fibrin gel scaffolds

Mechanical loading has long been shown to modulate cartilage-specific extracellular matrix synthesis. With joint motion, cartilage can experience mechanical loading in the form of compressive, tensile or shearing load, and hydrostatic pressure. Recent studies have demonstrated the capacity of unconfined cyclic compression to induce chondrogenic differentiation of human mesenchymal stem cell (hMSC) in agarose culture. However, the use of a nonbiodegradable material such as agarose limits the applicability of these constructs. Of the possible biocompatible materials available for tissue engineering, fibrin is a natural regenerative scaffold, which possesses several desired characteristics including a controllable degradation rate and low immunogenicity. The objective of the present study was to determine the capability of fibrin gels for supporting chondrogenesis of hMSCs under cyclic compression. To optimize the system, three concentrations of fibrin gel (40, 60, and 80 mg/mL) and three different stimulus frequencies (0.1, 0.5, and 1.0 Hz) were used to examine the effects of cyclic compression on viability, proliferation and chondrogenic differentiation of hMSCs. Our results show that cyclic compression (10% strain) at frequencies >0.5 Hz and gel concentration of 40 mg/mL fibrinogen appears to maintain cellular viability within scaffolds. Similarly, variations in gel component concentration and stimulus frequency can be modified such that a significant chondrogenic response can be achieved by hMSC in fibrin constructs after 8 h of compression spread out over 2 days. This study demonstrates the suitability of fibrin gel for supporting the cyclic compression-induced chondrogenesis of mesenchymal stem cells.     

Evaluation of different scaffolds for BMP-2 genetic orthopedic tissue engineering

To better understand the effects of scaffold materials for bone morphogenetic protein 2 (BMP-2) genetic tissue engineering in vivo, several gels, including alginate, collagen, agarose, hyaluronate, fibrin, or Pluronic, were mixed with adenovirus-mediated human BMP-2 gene (Adv-hBMP-2) transduced bone marrow stromal cells (BMSCs) and injected into the muscles of athymic mice to evaluate the resulting osteogenesis and chondrogenesis. These gel and gene-transduced BMSC mixtures were also loaded onto beta-TCP/HAP biphasic calcined bone (BCB) and observed under scanning electron microscopy (SEM). In addition, these composite scaffolds were implanted into the subcutaneous site of athymic mice to construct tissue-engineered bone. After injection, collagen, hyaluronate, or alginate gel mixed with gene-transduced BMSCs induced more bone formation than a cell suspension in alpha-MEM. The agarose-gene-transduced BMSC gel was found to contain much more hyaline cartilage. SEM showed the BMSCs could survive in alginate, agarose, and collagen gel in vitro for up to 8 d. After implantation of tissue-engineered bone, the alginate, collagen, and agarose gel could promote new bone formation within a BCB in vivo. Little or no bone formed after injection of fibrin or Pluronic gel mixed with BMSCs or implantation with BCB. These findings help to elucidate the effects of various scaffold materials for future research in orthopedic tissue engineering using BMP-2 transduced cells.     

Direct human cartilage repair using three-dimensional bioprinting technology

Current cartilage tissue engineering strategies cannot as yet fabricate new tissue that is indistinguishable from native cartilage with respect to zonal organization, extracellular matrix composition, and mechanical properties. Integration of implants with surrounding native tissues is crucial for long-term stability and enhanced functionality. In this study, we developed a bioprinting system with simultaneous photopolymerization capable for three-dimensional (3D) cartilage tissue engineering. Poly(ethylene glycol) dimethacrylate (PEGDMA) with human chondrocytes were printed to repair defects in osteochondral plugs (3D biopaper) in layer-by-layer assembly. Compressive modulus of printed PEGDMA was 395.73±80.40?kPa, which was close to the range of the properties of native human articular cartilage. Printed human chondrocytes maintained the initially deposited positions due to simultaneous photopolymerization of surrounded biomaterial scaffold, which is ideal in precise cell distribution for anatomic cartilage engineering. Viability of printed human chondrocytes increased 26% in simultaneous polymerization than polymerized after printing. Printed cartilage implant attached firmly with surrounding tissue and greater proteoglycan deposition was observed at the interface of implant and native cartilage in Safranin-O staining. This is consistent with the enhanced interface failure strength during the culture assessed by push-out testing. Printed cartilage in 3D biopaper had elevated glycosaminoglycan (GAG) content comparing to that without biopaper when normalized to DNA. These observations were consistent with gene expression results. This study indicates the importance of direct cartilage repair and promising anatomic cartilage engineering using 3D bioprinting technology.     

The potential of pulsed low intensity ultrasound to stimulate chondrocytes matrix synthesis in agarose and monolayer cultures

Pulsed low intensity ultrasound (PLIUS) has been used successfully for bone fracture repair and has therefore been suggested for cartilage regeneration. However, previous in vitro studies with chondrocytes show conflicting results as to the effect of PLIUS on the elaboration of extracellular matrix. This study tests the hypothesis that PLIUS, applied for 20 min/day, stimulates the synthesis of sulphated glycosaminoglycan (sGAG) by adult bovine articular chondrocytes cultured in either monolayer or agarose constructs. For both culture models, PLIUS at either 30 or 100 mW/cm² intensity had no net effect on the total sGAG content. Although PLIUS at 100 mW/cm² did induce a 20% increase in sGAG content at day 2 of culture in agarose, this response was lost by day 5. Intensities of 200 and 300 mW/cm² resulted in cell death probably due to heating from the ultrasound transducers. The lack of a sustained up-regulation of sGAG synthesis may reflect the suggestion that PLIUS only induces a stimulatory effect in the presence of a tissue injury response. These results suggest that PLIUS has a limited potential to provide an effective method of stimulating matrix production as part of a tissue engineering strategy for cartilage repair.     

Transient exposure to transforming growth factor beta 3 under serum-free conditions enhances the biomechanical and biochemical maturation of tissue-engineered cartilage

A goal of cartilage tissue engineering is the production of cell-laden constructs possessing sufficient mechanical and biochemical features to enable native tissue function. This study details a systematic characterization of a serum-free (SF) culture methodology employing transient growth factor supplementation to promote robust maturation of tissue-engineered cartilage. Bovine chondrocyte agarose hydrogel constructs were cultured under free-swelling conditions in serum-containing or SF medium supplemented continuously or transiently with varying doses of transforming growth factor beta 3 (TGF-beta3). Constructs were harvested weekly or bi-weekly and assessed for mechanical and biochemical properties. Transient exposure (2 weeks) to low concentrations (2.5-5 ng/mL) of TGF-beta3 in chemically defined medium facilitated robust and highly reproducible construct maturation. Constructs receiving transient TGF-beta3 exposure achieved native tissue levels of compressive modulus (0.8 MPa) and proteoglycan content (6-7% of wet weight) after less than 2 months of in vitro culture. This maturation response was far superior to that observed after continuous growth factor supplementation or transient TGF-beta3 treatment in the presence of serum. These findings represent a significant advance in developing an ex vivo culture methodology to promote production of clinically relevant and mechanically competent tissue-engineered cartilage constructs for implantation to repair damaged articular surfaces.     

Biomechanical and magnetic resonance characteristics of a cartilage-like equivalent generated in a suspension culture

OBJECTIVE: To generate a cartilage biomaterial using a suspension culture with biophysical properties similar to native articular cartilage. DESIGN: A novel cartilage tissue equivalent (CTE) using a no-scaffold, high-density suspension culture of neonatal porcine chondrocytes was formed on poly 2-hydroxyethyl methacrylate-treated plates for up to 16 weeks. Equilibrium aggregate modulus and hydraulic permeability were measured at 8 and 16 weeks using confined compression stress relaxation experiments. The CTE proteoglycan composition was characterized using sodium and T(1rho) magnetic resonance imaging methods after 8 weeks. RESULTS: The resultant CTE produces a biomaterial consistent with a hyaline cartilage phenotype in appearance and expression of type II collagen and aggrecan. The equilibrium aggregate modulus and permeability for the 8-week specimens were 41.6 (standard deviation (SD) 4.3) kPa and 2.85(-13) (SD 2.45(-13)) m(4)/Ns, respectively, and, for the 16-week specimens, 35.2 (SD 7.6) kPa and 2.67(-13) (SD 1.06(-13)) m(4)/Ns, respectively. Average sodium concentration of the 8-week CTE ranged from 260 to 278 mM and average T(1rho) relaxation times from 105 to 107 ms, indicating proteoglycan content similar to that of native articular cartilage. CONCLUSION: The high-density culture method produced a CTE with characteristics that approach those of native articular cartilage. The CTE mechanical properties are similar to those of the native cartilage. The CTE developed in this study represents a promising methodological advancement in cartilage tissue engineering and cartilage repair.     

Regaining chondrocyte phenotype in thermosensitive gel culture

Chondrocyte tissue engineering continues to be a challenging problem. When chondrocytes are duplicated in vitro, it is imperative to obtain an adequate number of cells of optimal phenotype. A temperature-sensitive polymer gel, a copolymer of poly(N-isopropylacrylamide) and acrylic acid (PNiPAAm-co-Aac), has the ability of gelling at 37 degrees C (the lower critical solution temperature, LCST) or above and liquefying below that temperature (Vernon and Gutowska, Macromol. Symp. 1996;109:155-167). The hypothesis of this study was that chondrocytes could (1) duplicate in the copolymer gel; (2) regain their chondrocyte phenotype; and (3) be easily recovered from the gel by simply lowering the temperature below 37 degrees C. Chondrocytes from adult rabbit scapular cartilage were harvested and cultured in a monolayer culture until confluency (approximately 2 weeks). Next, the cells were harvested and seeded into the copolymer gel and cultured for 2-4 weeks. The phenotype of the cultured cells was then characterized. Two groups of control cultures, monolayer and agarose gel, were used to compare their ability to maintain chondrocyte phenotype. The results showed that chondrocytes isolated from rabbit scapula can re-express chondrocyte phenotype in agarose culture and polymer gel culture but not in monolayer culture. Also, cultured chondrocytes can be easily recovered from polymer gel culture by simply lowering the temperature. This new in vitro method of chondrocyte culture is recommended for chondrocyte propagation and regaining chondrocyte phenotype before cell seeding or transplantation.     

组织工程软骨种子细胞的定向诱导分化

背景：软骨修复一直是骨科治疗难题和研究热点。随着组织工程学的发展,近年来应用种子细胞诱导分化为软骨细胞,构建组织工程软骨修复软骨缺损的思路倍受关注,并已取得一定成功。 目的：讨论组织工程软骨的种子细胞选择、成软骨定向诱导分化的培养条件,尤其是细胞因子、诱导方法、培养方式等因素的作用。 方法：计算机检索中国期刊全文数据库及PubMed 数据库2000-01/2010-09相关文章,检索词为“软骨形成,软骨缺损,刺激因子,软骨修复,组织工程,chondrification, cartilage defect; stimulating factor,cartilage repair,tissue engineering”。语种限定为：中文与英文。纳入与软骨形成、诱导分化、组织工程支架方面的基础和临床研究,排除内容陈旧及重复研究。计算机初检得到155篇文献,根据纳入排除标准,最终纳入41篇。 结果与结论：种子细胞在特定细胞因子作用下可定向分化为软骨细胞。通过选择合适的种子细胞及细胞因子定向诱导分化构建组织工程软骨,能够为成功治愈关节软骨缺损提供新思路。软骨定向分化因子转化生长因子β、碱性成纤维细胞生长因子、骨生成蛋白、胰岛素样生长因子、生长激素等调控诱导可通过介质添加物、基因转染、不同培养方式等几种方式促进向软骨方向转化。相信随着软骨定向诱导分化研究的深入,为临床上运用软骨组织工程学来解决关节软骨缺损修复这一难题提供了有效依据,有广泛的临床应用前景。     

Novel strategies for enhancing tissue integration in cartilage repair

Introduction Articular cartilage is unable to initiate a spontaneous repair response when injured due to its avascular and aneural properties. Within adult cartilage, chondrocytes are entrapped within an extensive extracellular matrix and are unable to migrate to sights of injury to regulate tissue repair. Injury to this tissue therefore inevitably leads to degeneration of the cartilage and the development of degenerative diseases such as osteoarthritis. The surgical technique of autologous chondrocyte transplantation (ACT) was developed for the treatment of full‐thickness cartilage defects ( Brittberg et al. 1994 ). Implantation of chondrocytes into the defect site repairs the injury site with a mixture of fibrocartilaginous and hyaline‐like tissue that poorly integrates with the existing cartilage and frequently degenerates with time. In this current study, we have developed an in vitro model to investigate methods for enhancing this integration and the development of a more biomechanically stable repair tissue. Materials and methods Bovine articular cartilage explants from the metacarpalphalangeal joint were experimentally injured using a stainless steel trephine and cultured for a period of 28 days. Autologous chondrocytes in an agarose suspension were injected into the interface region at the injury site. Media was collected and analysed for proteoglycan and collagen content using the DMMB and hydroxyproline assays, respectively. Matrix metalloproteinase (MMP) expression was also analysed using zymography and an adapted collagen fibril assay. Results Morphological analyses indicate attempts at repair and integration within both control and experimental treatment groups, although the presence of autologous chondrocytes appeared to amplify this repair response. Although not statistically significant, considerable differences in proteoglycan release between injured explants and the intact control group were seen. Collagen release into the media was only seen at day 28 within experimental cultures. An up‐regulation of MMP‐2 and MMP‐9 was seen within the experimental cultures compared to the controls. Preliminary data also suggest up‐regulation of collagenases in the experimental group when compared to controls. Discussion As seen with clinical ACT treatment, the presence of autologous chondrocytes appears to enhance repair and integration attempts; however, morphologically, this repair tissue appears to be fibrocartilaginous. Further analysis will establish whether the repair tissue is true hyaline cartilage and monitor the synthesis and turnover of macromolecules within the established culture system.     

Photoimmobilization of biomolecules within a 3-dimensional hydrogel matrix

It has been recognized that a three-dimensional cell invasive scaffold that provides both topographical and chemical cues is desirable in regenerative tissue engineering to encourage cell attachment, migration, regrowth and ultimately tissue repair. Carbohydrate hydrogels are attractive for such applications because they are generally biocompatible and able to match the mechanical properties of most soft tissues. Although carbohydrate hydrogels have been previously modified with cell adhesive peptides and proteins, complicated hydrogel matrix activation was required prior to biomolecule coupling and, perhaps more importantly, the overall immobilization yield was low at approximately 1%. In this study, we report the photo-immobilization of a model biomolecule, ovalbumin (OVA), to agarose gel. We describe two methods of modification where the photoactive moiety is coupled to either the protein (i.e. OVA) or the matrix (i.e. agarose) prior to immobilization. We found that the photo-immobilization yield depends on the location of the photoactive moiety. Using photoactive OVA, 1.8% of the OVA initially incorporated into the agarose gel is immobilized; using photoactive agarose, 9.3% of the OVA initially mixed with the agarose is immobilized. The latter is a significant improvement over previous yields and may be useful in attaining our goal of immobilizing a biomolecule gradient for guided tissue regeneration.     

Photoimmobilization of biomolecules within a 3-dimensional hydrogel matrix

It has been recognized that a three-dimensional cell invasive scaffold that provides both topographical and chemical cues is desirable in regenerative tissue engineering to encourage cell attachment, migration, regrowth and ultimately tissue repair. Carbohydrate hydrogels are attractive for such applications because they are generally biocompatible and able to match the mechanical properties of most soft tissues. Although carbohydrate hydrogels have been previously modified with cell adhesive peptides and proteins, complicated hydrogel matrix activation was required prior to biomolecule coupling and, perhaps more importantly, the overall immobilization yield was low at ~1%. In this study, we report the photo-immobilization of a model biomolecule, ovalbumin (OVA), to agarose gel. We describe two methods of modification where the photoactive moiety is coupled to either the protein (i.e. OVA) or the matrix (i.e. agarose) prior to immobilization. We found that the photo-immobilization yield depends on the location of the photoactive moiety. Using photoactive OVA, 1.8% of the OVA initially incorporated into the agarose gel is immobilized; using photoactive agarose, 9.3% of the OVA initially mixed with the agarose is immobilized. The latter is a significant improvement over previous yields and may be useful in attaining our goal of immobilizing a biomolecule gradient for guided tissue regeneration.     

Evaluation of three-dimensional scaffolds prepared from poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) for growth of allogeneic chondrocytes for cartilage repair in rabbits

Articular cartilage repair using tissue engineering approach generally requires the use of an appropriate scaffold architecture that can support the formation of cartilage tissue. In this investigation, the potential of three-dimensional scaffolds made of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) was evaluated in rabbit articular cartilage defect model. Engineered PHBHHx cartilage constructs inoculated in vitro with rabbit chondrocytes for 30 days were examined. Subsequently the constructs inoculated with chondrocytes for 10 days were selected for transplantation into rabbits. After 16 weeks of in vivo implantation, both the engineered cartilage constructs and the bare scaffolds were found to be filled the defects with white cartilaginous tissue, with the engineered constructs showing histologically good subchondral bone connection and better surrounding cartilage infusion. Owing to pre-seeded chondrocytes in the PHBHHx scaffolds, better surface integrality and more accumulation of extracellular matrix (ECM) including type II collagen and sGAG were achieved in the engineered cartilage constructs. The repaired tissues possessed an average compressive modulus of 1.58MPa. For comparison, the defects without repair treatments still showed defects with fibrous tissues. These results demonstrated that PHBHHx is a useful material for cartilage tissue engineering.     

Chondrogenic derivatives of embryonic stem cells seeded into 3D polycaprolactone scaffolds generated cartilage tissue in vivo

In spite of recent scientific advances, treatment and repair of cartilage using tissue engineering techniques remains challenging. The major constraint is the limited proliferative capacity of mature autologous chondrocytes used in the tissue engineering approach. This problem can be addressed by using stem cells, which can self-renew with greater proliferative potential. Cartilage tissue engineering using adult mesenchymal stem cells derived from bone marrows has met with limited success. In this study we explored cartilage tissue generation from embryonic stem cells (ESCs). ESCs were induced to differentiate into chondroprogenitors, capable of proliferating and subsequently differentiating into cartilage-producing cells. The chondrogenic cells expressed chondrocyte-specific markers and deposited extracellular matrix proteins, proteoglycans. ESC-derived chondrogenic cells and polycaprolactone scaffolds seeded with these cells implanted in mice (129 SvImJ) generated cartilage tissue in vivo. Postimplant analysis of the retrieved tissues demonstrated cartilage-like tissue formation in 3-4 weeks. The cells of retrieved tissues also expressed the chondrocyte-specific marker collagen II. These findings suggest that ESCs can be used for tissue engineering and cultivation of cartilage tissues.     

运动性软骨损伤与组织工程化软骨及生物支架材料的修复

背景：篮球运动中造成软骨损伤较为常见。随着组织工程和生物材料的应用发展,利用软骨组织工程化或支架材料修复已成为趋势。 目的：对篮球运动中造成软骨损伤的因素进行探讨,重点对组织工程支架材料修复过程中关注的3个要素的研究和运用情况进行概括。 方法：由第一作者检索2005-01/2010-10PubMed数据库(http://www.ncbi.nlm.nih.gov/PubMed)及万方数据库(http://www. wanfangdata.com.cn)。英文检索词为“crtilage,damage,treatment, biological materials”,中文检索词为“组织工程;软骨损伤;修复;生物材料;种子细胞”。检索文献量总计120篇,选择文章内容与软骨治疗方法、材料学特点、生物相容性、材料改性、表面修饰及其应用效果相关等方面的文献,排除陈旧及重复实验文章,同一领域文献则选择近期发表或发表在权威杂志的文章,最终纳入30篇符合标准的文献。 结果与结论：种子细胞、支架材料和体外培养环境,构成了软骨组织工程学注重的3个要素,3者组成了一个相互促进相互制约的整体,以组织工程技术修复软骨损伤时应注重到3者间的恰当选择和配置。