Poly (acrylic acid) chitosan interpolymer complexes for stomach controlled antibiotic delivery

The aim of this study was to develop a stomach-specific drug delivery system to increase the efficacy of amoxicillin against Helicobacter pylori. Polyacrylic acid (PAA), chitosan (CS), and amoxicillin (A) were employed to obtain polyionic complexes. The design of the hydrogel delivery system was based on the swellable approach; with a floating feature to prolong the Gastric Residence Time (GRT). The polyionic complex (PAA:CS:A 2.5:5:2) showed a sustained drug release profile in enzyme-free simulated gastric fluid (SGF) and pH 4.0. A pH independent swelling-eroding pattern with adequate maximum swelling ratios of 17.76 and 13.42 was obtained at in SGF and pH 4.0, respectively, with similar eroding profiles in both pH media. This network carrier provides an amoxicillin protective effect towards the hydrolytic degradation in SGF. The in vivo study was performed on healthy volunteers, using the [13C] octanoic acid breath test. The proposed hydrogel showed a prolonged GRT of up to 3 h. The preliminary results from this study suggest that amoxicillin polyionic complexes have potential for improving local antibiotic therapy against H. pylori.     

Release of amoxicillin from polyionic complexes of chitosan and poly(acrylic acid). Study of polymer/polymer and polymer/drug interactions within the network structure

Polyionic complexes of chitosan (CS) and poly(acrylic acid) (PAA) were prepared in a wide range of copolymer composition and with two kind of drugs. Release of amoxicillin trihydrate and amoxicillin sodium from these different complexes were studied. The swelling behavior of and solute transport in swellable hydrogels were investigated to check the effect of polymer/polymer and polymer/drugs interactions. The electrostatic polymer/polymer interactions take place between the cationic groups from CS and the anionic ones from PAA. The diffusion of amoxicillin trihydrate was controlled only by the swelling/eroding ratio of the polyionic complexes. The swelling degree of amoxicillin sodium hydrogels was more extensive when compared to the swelling degree of amoxicillin trihydrate formulations. It was concluded that the water uptake was mainly governed by the degree of ionization. Restriction of amoxicillin sodium diffusion could be achieved by polymer/ionized-drug interaction that retards the drug release. Freeze-dried polyionic complexes could serve as suitable candidates for amoxicillin site-specific delivery in the stomach.     

Chitosan-poly(acrylic) acid polyionic complex: in vivo study to demonstrate prolonged gastric retention

The aim of this study was to develop a chitosan-poly(acrylic) acid based controlled drug release system for gastric antibiotic delivery. Different mixtures of amoxicillin (A), chitosan (CS), and poly(acrylic) acid (PAA) were employed to obtain these polyionic complexes. A non-invasive method was employed for determining the gastric residence time of the formulations. It was studied the swelling behavior and drug release from these complexes. Gastric emptying rate study was performed by means of the [13C]octanoic acid breath test. The gastric emptying rates of two different formulations (conventional and gastric retentive system) were studied. Swelling studies indicated that the extent of swelling was greater in the polyionic complexes than in the single chitosan formulations. The amoxicillin diffusion from the hydrogels was controlled by the polymer/drug interaction. The property of these complexes to control the solute diffusion depends on the network mesh size, which is a significant factor in the overall behavior of the hydrogels. The gastric half-emptying time of the polyionic complex was significantly delayed compared to the reference formulation, showing mean values of 164.32+/-26.72 and 65.06+/-11.50min, respectively (P<0.01). The results of this study suggest that, these polyionic complexes are good systems for specific gastric drug delivery.     

Thermoresponsive UCST‐Type Behavior of Interpolymer Complexes of Poly(ethylene glycol) and Poly(poly(ethylene glycol) methacrylate) Brushes with Poly(acrylic acid) in Isopropanol

Upper critical solution temperature (UCST)‐type thermoresponsive behavior of poly(ethylene glycol)–poly(acrylic acid) (PEG–PAA) and poly(poly(ethylene glycol) methacrylate)–poly(acrylic acid) (PPEGMA–PAA) interpolymer complexes has been observed in isopropanol. For these investigations, PPEGMA and PAA with various average molecular weights have been synthesized by atom transfer radical polymerization. It has been found that both the PEG and PPEGMA have lower cloud point temperatures (T _cp) than its mixed polymer solutions with PAA, whereas PAA does not show such behavior in the investigated temperature range. These findings indicate the reversible formation of interpolymer complexes with variable structure and composition in the solutions of the polymer mixtures in isopropanol. Increasing the ethylene glycol/acrylic acid molar ratio or the molecular weight of either the PAA or the H‐acceptor PEG component of the interpolymer complexes increases the UCST‐type cloud point temperatures of these interpolymer systems. The polymer–polymer interactions by hydrogen bonds between PAA and PEG or PPEGMA and the correlations between T _cp and structural parameters of the components revealed in the course of these investigations may be utilized for exploring well‐defined UCST‐type material systems for various applications.

     

pH敏感性羟乙基甲壳素/聚丙烯酸水凝胶的制备及其释药性能研究

用氯乙醇对甲壳素进行醚化改性，得到水溶性羟乙基甲壳素（Hydroxyethyl chitin，HECH），用化学交联法制备了由聚丙烯酸（PAA）和HECH复合的互穿网络（IPN）水凝胶。溶胀实验表明：该水凝胶在人工肠液（pH7．4，I=0．1）中的溶胀度远大于在人工胃液（pH）．4，I=0．1）中的溶胀度，凝胶的溶胀度随着温度的升高而增大；以该凝胶制备了双氯芬酸钾缓释体系，释放实验表明该凝胶具有较好的缓释性能。     

Interpolymer complex between poly(ethylene oxide) and poly(acrylic acid): Viscometric studies in THF-water mixtures

Systematic studies were performed on interpolymer complex formation between Poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) in THF-water mixtures of different compositions. Viscosity behaviour during complex formation in mixed solvents was found to be entirely different from that observed by other workers in aqueous and in pure organic solvents. The result are interpreted in terms of, (a) preferential solvation of the polymer, (b) Probable change in conformation of the polyelectrolyte moleculer. (c) association of complex molecules in a medium of low dielectric constant, and (d) expected disordering of bound water molecules around PEO by THF. Irrespective of solvent composition, interpolymer complex of PAA and PEO was always found to have 1:1 unit mole ratio.     

Oral sustained delivery of diclofenac sodium using calcium chondroitin sulfate matrix

Chondroitin sulfate (CS) is a potential candidate for colon-specific drug carriers. However, the readily water-soluble nature limits its application as a solid-state drug-delivery vehicle. In this study, the CS formation of a polyelectrolyte complex (PEC) with Ca2+ (CS-Ca) was adapted to retain CS in a solid form for use in a drug-delivery system. Pre-treated CS with poly(ethylene glycol) diglycidyl ether (EX-810) followed by complexation with Ca2+ was also tested (CS-Ca-EX). Diclofenac sodium was used as a drug probe to evaluate the performance of the drug-release behavior of the complexes. The amount of diclofenac sodium released was higher in simulated intestinal fluid (SIF) than in simulated gastric fluid (SGF) due to the anionic groups on CS or the higher solubility of drug itself in PBS. The release profile of diclofenac sodium from CS-Ca-EX was most notably sustained when compared to other groups. Enzymatic degradation by chondroitinase ABC of CS, CS-Ca and CS-Ca-EX exhibited a similar degradation mechanism and GPC revealed the dissolution rate of CS from the three matrix types was, in decreasing order: CS, CS-Ca, CS-Ca-EX. The synergy of the anti-inflammatory activity of diclofenac sodium in CS-based complexes was evaluated using the carrageenan-induced edema rat test. The percentage of swelling was lower for all experimental groups as compared to the control, untreated group. The anti-inflammatory activity of diclofenac in the CS matrix gradually increased up to 9 h but CS-Ca or CS-Ca-EX matrices showed less potency than the CS matrix in reducing inflammation.     

Radiation synthesis of interpolymer polyelectrolyte complex and its application as a carrier for colon-specific drug delivery system

Novel pH-sensitive interpolymer polyelectrolyte complex was synthesized by gamma radiation-induced copolymerization of acrylic acid (AAc) and dimethyl aminoethyl methacrylate (DMAEMA). pH-dependent swelling showed different phase transitions depending on the copolymer composition and also showed the interpolymer polyelectrolyte complex formation at pH values ranged from pH 3 to pH 4. FT-IR and TGA was employed to study the complex formation. The influence of copolymer composition and pH value of the surrounding medium on the type of water diffusion in the glassy polymer was discussed. The ability of the prepared copolymer to be used as drug carrier for colon-specific drug delivery system was estimated using ketoprofen as a model drug.     

Novel alginate-acrylic polymers as a platform for drug delivery

The aim of the present work was to develop a family of novel materials based on a combination of sodium alginate and acrylic polymers and to evaluate their potential in drug delivery applications. In the presence of sodium alginate, acrylic chains with acidic as well as basic moieties were polymerized to create an interpolymer complex based on electrostatic interactions that are able to modulate the release rate of low molecular weight drugs. The synthesized materials were used to prepare hydrophilic matrices for drug delivery and tested for their adhesion properties to glass, used as a model substrate for mucoadhesion.     

Solute transport analysis in pH-responsive, complexing hydrogels of poly(methacrylic acid-g-ethylene glycol)

We report on the preparation and properties of hydrogels of poly(methacrylic acid-g-ethylene glycol) that exhibit pH-responsive swelling behavior due to the reversible formation/dissociation of interpolymer complexes. Because of their nature, these materials may be useful in drug delivery applications. In this work, we studied the diffusional behavior of three solutes of varying molecular size in the complexing hydrogels as a function of solution pH. The ability of these gels to control the solute diffusion rates was strongly dependent on the molecular size of the solute and the environmental pH. The diffusion coefficients for solutes were calculated as a function of pH and were lower in acidic than neutral or basic media due to the formation of interpolymer complexes in the gels. However, the ratio of the solute radius to the network mesh size also was a significant factor in the overall behavior of these gels. The diffusion coefficient of the smallest solute, proxyphylline, studied only changed by a factor of five between the complexed and uncomplexed state. However, for the largest solute, FITC-dextran, which has a molecular radius ten times greater than proxyphylline, the diffusion coefficients of the drugs in complexed and uncomplexed gels varied by almost two orders of magnitude. These results are explained in terms of mesh size characteristics of the gels.     

Solute transport analysis in pH-responsive,complexing hydrogels of poly(methacrylic acid-g-ethylene glycol)

We report on the preparation and properties of hydrogels of poly(methacrylic acid-g-ethylene glycol) that exhibit pH-responsive swelling behavior due to the reversible formation/dissociation of interpolymer complexes. Because of their nature, these materials may be useful in drug delivery applications. In this work, we studied the diffusional behavior of three solutes of varying molecular size in the complexing hydrogels as a function of solution pH. The ability of these gels to control the solute diffusion rates was strongly dependent on the molecular size of the solute and the environmental pH. The diffusion coefficients for solutes were calculated as a function of pH and were lower in acidic than neutral or basic media due to the formation of interpolymer complexes in the gels. However, the ratio of the solute radius to the network mesh size also was a significant factor in the overall behavior of these gels. The diffusion coefficient of the smallest solute, proxyphylline, studied only changed by a factor of five between the complexed and uncomplexed state. However, for the largest solute, FITC-dextran, which has a molecular radius ten times greater than proxyphylline, the diffusion coefficients of the drugs in complexed and uncomplexed gels varied by almost two orders of magnitude. These results are explained in terms of mesh size characteristics of the gels.     

A novel mucoadhesive polymer prepared by template polymerization of acrylic acid in the presence of chitosan

A novel mucoadhesive polymer was prepared by template polymerization of acrylic acid in the presence of chitosan for transmucosal drug delivery system (TMD). FT-IR results indicated that polymer complex was formed between poly(acrylic acid) (PAA) and chitosan through hydrogen bonding. Glass transition temperature (Tg) of chitosan and PAA in the PAA/chitosan polymer complexes was inner-shifted compared with Tg of chitosan and PAA itself. This may be due to the increased miscibility of PAA with chitosan through the hydrogen bonding. The crystallinity of chitosan in the PAA/chitosan polymer complexes was decreased with polymer complex formation with PAA. The dissolution rate of the PAA/chitosan polymer complex was dependent on pH and ratio of PAA/chitosan. The mucoadhesive force of PAA/chitosan polymer complex was similar to a commericial product, Carbopol 971P NF.     

A pH-sensitive chitosan-tripolyphosphate hydrogel beads for controlled glipizide delivery

A chitosan(CS)-tripolyphosphate (TPP) hydrogel bead was prepared by the ionic gelation method for the controlled delivery of glipizide. The structure and surface morphology of the beads were characterized by FT-IR and SEM, separately. Factors influencing the swelling behavior of the hydrogel beads were also investigated, such as CS concentration (X(1)), TPP concentration (X(2)), the weight ratio of drug to polymer (X(3)), crosslinking time (X(4)), and the volume ratio of CS to TPP (X(5)). In addition, the swelling property and the delivery behavior of the hydrogel bead was studied as well. With decreasing of pH value, the swelling ratio of the bead was increasing. The swelling ratio of hydrogel bead at pH 1.5 was relatively high, while this value was low at pH 6.8. The amount of glipizide released from the hydrogel bead at pH 1.5 was about 90%, while this value approached 36% at pH 6.8. The results clearly suggested that the CS-TPP hydrogel beads were used as a pH-sensitive controlled release system for the delivery of glipizide.     

Poly(acrylic acid)-grafted Poly(N-isopropyl acrylamide) Networks: Preparation,Characterization and Hydrogel Behavior

Poly(acrylic acid)-grafted poly(N-isopropylacrylamide) co-polymer networks (PNIPAAm-g-PAA) were prepared via the reversible addition-fragmentation transfer (RAFT) polymerization of N-isopropyl- acrylamide (NIPAAm) with trithiocarbonate-terminated PAA as a macromolecular chain-transfer agent in the presence of N,N-methylenebisacrylamide. The PNIPAAm-g-PAA co-polymer networks were characterized by means of Fourier transform infrared spectroscopy, differential scanning calorimetry and small-angle X-ray scattering. It is found that the PNIPAAm-g-PAA co-polymer networks were microphase-separated, in which the microdomains of PNIPAAm-PAA interpolymer complexes were dispersed into the PNIPAAm matrix. The PNIPAAm-g-PAA hydrogels displayed a dual response to temperature and pH values. The thermoresponsive properties of PNIPAAm-g-PAA networks were investigated. Below the volume phase transition temperatures, the PNIPAAm-g-PAA hydrogels possessed much higher swelling ratios than control PNIPAAm hydrogel. In terms of swelling, deswelling and reswelling tests, it is judged that the PNIPAAm-g-PAA hydrogels displayed faster response to the external temperature changes than control PNIPAAm hydrogel. The improved thermoresponsive properties of hydrogels are ascribed to the formation of PAA-grafted PNIPAAm networks, in which the water-soluble PAA chains behave as the hydrophiphilic tunnels and allow water molecules to go through and, thus, to accelerate the diffusion of water molecules.     

Poly(glutamic acid) poly(ethylene glycol) hydrogels prepared by photoinduced polymerization: Synthesis,characterization, and preliminary release studies of protein drugs

A class of new biodegradable hydrogels based on poly(ethylene glycol) methacrylate-graft-poly(glutamic acid) and poly(ethylene glycol) dimethacrylate was synthesized by photoinduced polymerization. Because all the polymeric constituents were highly hydrophilic, crosslinking could be performed in aqueous solutions. This type of crosslinked hydrogel was prepared by modifying a select number of acidic side-groups on poly(glutamic acid) with poly(ethylene glycol) methacrylate. These modified chains were then crosslinked in the presence of poly(ethylene glycol) dimethacrylate under a photoinduced polymerization at a wavelength of 365 nm. Swelling experiments were conducted to study the crosslinking density, pH-responsive behavior, and degradation of the hydrogel. Results showed that the degree of swelling of this type of hydrogels increased as the crosslinker concentration (or density) was reduced. Because of the presence of acidic side chains on poly(glutamic acid), swelling behavior was found to be pH-responsive, increasing at high pH in response to the increase in the amount of ionized acidic side chains. The degradation rate of these hydrogels also varied with pH. More rapid degradation was observed under stronger alkaline conditions because of the hydrolysis of the ester bonds between the crosslinker and the polymer backbone. Practically useful degradation rates could be achieved for such hydrogels under physiological conditions. Drug release rates from these hydrogels were found to be proportional to the protein molecular weight and the crosslinker density; increasing at lower protein molecular weight or crosslinker density. The preliminary findings presented in this article suggest that this class of biodegradable hydrogels could be an attractive avenue for drug delivery applications. The specific photoinduced crosslinking chemistry used would permit hydrogels to be synthesized in existence of the entrapped macromolecular drugs including peptides, proteins, and cells. In addition, the rapid feature of this polymerization procedure along with the ability to perform hydrogel synthesis and drug loading in an aqueous environment would offer great advantages in retaining drug activity during hydrogel synthesis.     

Insoluble ionic complexes of polyacrylic acid with a cationic drug for use as a mucoadhesive, ophthalmic drug delivery system

We have developed a new mucoadhesive drug delivery formulation based on an ionic complex of partially neutralized poly(acrylic acid) (PAA) and a highly potent beta blocker drug, levobetaxolol x hydrochloride (LB x HCl), for use in the treatment of glaucoma. PAA was neutralized with sodium hydroxide to varying degrees of neutralization. Aqueous solutions containing concentrations of LB x HCl equivalent to the degree of PAA neutralization were added to the PAA solutions and formed insoluble complexes, which were isolated. The complex formation was followed by turbidimetric titration, and the complexes were characterized by IR and 1H NMR spectroscopy. Complexes were prepared with varying degrees of drug loading, such that the same PAA chain would have free -COOH groups for mucoadhesion along with ionic complexes of LB x H+ with COO- groups. Thin films of the complexes dissociated to release the drug by ion exchange with synthetic tear fluid. The films shrunk continuously during release of the drug and dissolved completely in 1 h. Solid inserts of these films could be useful as a mucoadhesive ophthalmic drug delivery system.     

Release of triamcinolone acetonide from mucoadhesive polymer composed of chitosan and poly(acrylic acid) in vitro

Transmucosal drug delivery (TMD) system using mucoadhesive polymer has been recently interested due to the rapid onset of action, high blood level, avoidance of the first-pass effect and the exposure of the drug to the gastrointestinal tract. A novel mucoadhesive polymer complex composed of chitosan and poly(acrylic acid) (PAA) was prepared by template polymerization of acrylic acid in the presence of chitosan for the TMD system. Triamcinolone acetonide (TAA) was loaded into the chitosan/PAA polymer complex film. TAA was evenly dispersed in chitosan, PAA polymer complex film without interaction with polymer complex. Release behavior of TAA from the mucoadhesive polymer film was dependent on time, pH, loading content of drug, and chitosan PAA ratio. The analysis of the drug release from the mucoadhesive film showed that TAA might be released from the chitosan/PAA polymer complex film through non-Fickian diffusion mechanism.     

Oscillating Swelling–Shrinking Dynamics and Diffusive Properties of Weakly Cationic Poly(Aminoalkyl Methacrylate)‐Based Cryogels: Quantifying the Influence of Polymer Network Parameters

Thermodynamic properties of swelling equilibria and variability of dynamic response of pH‐sensitive polybases are examined. Poly(aminoalkyl methacrylate)‐based cryogels and hydrogels are prepared in a facile way by crosslinking polymerization of amine functional monomer N,N‐dimethylaminoethyl methacrylate (DMAEMA) in the presence of diethyleneglycol dimethacrylate as crosslinker at temperatures below and above freezing point of polymerization solvent, water, via cryogelation and conventional crosslinking polymerization. The effect of polymerization temperature on swelling characteristics of the prepared polybasic gels is investigated as a function of the gel‐preparation concentration. The overshooting effect is observed during pH‐dependent swelling of poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) hydrogels in acidic medium. Protonation/deprotonation of tertiary amine groups in network‐forming polymer demonstrates critical swelling behavior as pH of the swelling medium increases. Oscillating swelling–shrinking studies are performed and effective diffusion coefficient of water within PDMAEMA cryogel and hydrogel matrices is estimated using the dynamic swelling profiles. The mechanism of cyclic swelling–shrinking process of PDMAEMA cryogels and hydrogels are analyzed to control their pulsatile output patterns in metabolic oscillations. Considering the swelling process occurs through Fickian diffusion mechanism in acidic solutions, polybasic cryogels and hydrogels prepared in this study are thus proposed as good candidates for delivery applications.     

Insoluble ionic complexes of polyacrylic acid with a cationic drug for use as a mucoadhesive,ophthalmic drug delivery system

We have developed a new mucoadhesive drug delivery formulation based on an ionic complex of partially neutralized poly(acrylic acid) (PAA) and a highly potent beta blocker drug, levobetaxolol · hydrochloride (LB · HCl), for use in the treatment of glaucoma. PAA was neutralized with sodium hydroxide to varying degrees of neutralization. Aqueous solutions containing concentrations of LB · HCl equivalent to the degree of PAA neutralization were added to the PAA solutions and formed insoluble complexes, which were isolated. The complex formation was followed by turbidimetric titration, and the complexes were characterized by IR and ¹H NMR spectroscopy. Complexes were prepared with varying degrees of drug loading, such that the same PAA chain would have free COOH groups for mucoadhesion along with ionic complexes of LB · H⁺ with COO^- groups. Thin films of the complexes dissociated to release the drug by ion exchange with synthetic tear fluid. The films shrunk continuously during release of the drug and dissolved completely in 1 h. Solid inserts of these films could be useful as a mucoadhesive ophthalmic drug delivery system.     

Poly(ethylene glycol)-containing Hydrogels for Oral Protein Delivery Applications

Novel pH-sensitive hydrogels were developed as suitable candidates for carriers in bioMEMS devices as well as for oral delivery of therapeutic peptides and proteins due to their ability to respond to environmental pH change. Macromonomers containing various PEG molecular weights were synthesized and used to prepare P(MAA-g-EG) hydrogels were by photopolymerization. P(MAA-g-EG) hydrogels showed a drastic change of the equilibrium swelling ratio between pH 2.2 and 7.0. At pH 7.0, hydrogels with PEGMA2000 exhibited higher swelling ratio than hydrogels with PEGMA1000. For both hydrogels with PEGMA1000 and PEGMA2000, the swelling mechanism became more relaxation-controled as the environmental pH changed from 2.2 to 7.0 due to the ionization of the functional groups in polymer networks at high pH. In vitro release studies of insulin were conducted. P(MAA-g-EG) hydrogels exhibited drastic increase of insulin release as the pH of the medium was changed from acidic to basic. Insulin release from P(MAA-g-EG) hydrogels with PEGMA2000 was slower than from hydrogels with PEGMA1000 at both low and high pH. These results were used to design and improve protein release behavior from these carriers.