Sensitive determination of oxybutynin and desethyloxybutynin in dog plasma by LC-ESI/MS/MS

A sensitive and selective liquid chromatographic method coupled with tandem mass spectrometry (LC-MS/MS) was developed for the quantification of oxybutynin and desethyloxybutynin in dog plasma. Diazepam was used as internal standard, with plasma sample extracted using n-hexane and back-extracted using hydrochloric acid. A centrifuged lower layer (aqueous layer) was injected into a C(18) XTerra MS column (2.1 x 30 mm(2)) with 3.5 microm particle size. The analytical column lasted for at least 500 injections. The mobile phase was composed of 90% methanol, with flow rate at 200 microl/min. The mass spectrometer was operated in positive ion mode using electrospray ionization. Nitrogen was used as the nebulizer gas and argon was used as the collision gas. Using MS/MS with multiple reaction monitoring (MRM) mode, oxybutynin and desethyloxybutynin were detected without severe interferences from plasma matrix. Oxybutynin produced a protonated precursor ion ([M+H](+)) at m/z 358 and a corresponding product ion at m/z 142. Desethyloxybutynin produced a protonated precursor ion ([M+H](+)) at m/z 330 and a corresponding product ion at m/z 96. And internal standard (diazepam) produced a protonated precursor ion ([M+H](+)) at m/z 285 and a corresponding product ion at m/z 193. Detection of oxybutynin and desethyloxybutynin in dog plasma were accurate and precise, with detection limit at 0.1 ng/ml. This method has been successfully applied to a study of oxybutynin and desethyloxybutynin in dog plasma.     

An automatic 96-well solid phase extraction and liquid chromatography-tandem mass spectrometry method for the analysis of morphine, morphine-3-glucuronide and morphine-6-glucuronide in human plasma.

A bioanalytical method using automated sample transferring, automated solid phase extraction (SPE) and liquid chromatography-tandem mass spectrometry (LC-MS-MS) was developed for morphine (MOR), and its metabolites morphine-3-glucuronide (M3G) and morphine-6-glucuronide (M6G) in human plasma. Samples of 0.25 ml were transferred into 96-well plate using automatic liquid handler (Multiprobe II). Automated SPE was carried out on a 96-channel programmable liquid handling workstation (Quadra 96) using a C(18) sorbent. The extract was injected onto a silica column using an aqueous-organic mobile phase. The chromatographic run time was 3.5 min per injection, with retention times of 1.5, 2.0 and 2.6 min for MOR, M6G, and M3G, respectively. The detection was by monitoring MOR at m/z 286-->152, M6G and M3G at m/z 462-->286. The deuterated internal standards were monitored at m/z 289-->152 for MOR-d(3), and m/z 465-->289 for M6G-d(3) and M3G-d(3). The standard curve range was 0.5-50 ng ml(-1) for MOR, 1.0-100 ng ml(-1) for M6G, and 10-1000 ng ml(-1) for M3G. The inter-day precision and accuracy of the quality control samples were <8% relative standard deviation (RSD) and <7% relative error (RE) for MOR, <5% RSD and <2% RE for M6G, and <2% RSD and <4% RE for M3G.     

LC-MS-MS determination of brostallicin in human plasma following automated on-line SPE

LC-MS-MS method using automated on-line solid-phase extraction (SPE) has been developed and validated for the quantitation of brostallicin (I), a new distamycin derivative, in human plasma. I is a DNA minor groove binder currently under phase I-II clinical evaluation as an anticancer drug. Plasma (0.4 ml) was spiked with 0.2 ml stable label IS solution and placed in a 96-well plate maintained at +4 degrees C. Aliquots of 0.1 ml of prepared samples were loaded into the on-line SPE HySphere Resin SH cartridges (10 mm x 2 mm ID) and the analytes back eluted with the mobile phase into LC-MS-MS system. A Platinum Cyano column (100 mm x 4.6 mm, 3.6 microm) was used to perform the chromatographic analysis. The mobile phase was acetonitrile-ammonium formate buffer (pH 3.5; 20 mM) (70:30, v/v) at a flow rate of 1.0 ml/min. LC flow was split so that 300 microl/min was directed toward the mass spectrometer interface. Retention time of I was 2.6 min and the total cycle time was 8 min. MS detection used an Applied Biosystems/MDS SCIEX API 365 with a TurboIonSpray interface and MRM (m/Z: 725/257 for I and m/Z: 729/257 for IS) operated in positive ion mode. The method was validated over the calibration range 0.124-497 ng/ml. A negligible carry-over effect from the system was observed. In spite of the known instability of I in human plasma (about 20% decrease over 12 h), the ratio analyte/IS peak area showed good stability over the analysis time required for 96 samples. The automated on-line SPE method can be considered as a valid alternative to the off-line manual SPE procedure previously developed.     

Determination of ambroxol in human plasma using LC-MS/MS

A sensitive and selective liquid chromatographic method coupled with tandem mass spectrometry (LC-MS/MS) was developed for the quantification of ambroxol in human plasma. Domperidone was used as internal standard, with plasma samples extracted using diethyl ether under basic condition. A centrifuged upper layer was then evaporated and reconstituted with 200 microl methanol. The reconstituted samples were injected into a C(18) XTerra MS column (2.1 x 30 mm) with 3.5 microm particle size. The analytical column lasted for at least 600 injections. The mobile phase was composed of 20 mM ammonium acetate in 90% acetonitrile (pH 8.8), with flow rate at 250 microl/min. The mass spectrometer was operated in positive ion mode using turbo electrospray ionization. Nitrogen was used as the nebulizer, curtain, collision, and auxiliary gases. Using MS/MS with multiple reaction monitoring (MRM) mode, ambroxol was detected without severe interferences from plasma matrix. Ambroxol produced a protonated precursor ion ([M+H](+)) at m/z 379 and a corresponding product ion at m/z 264. And internal standard (domperidone) produced a protonated precursor ion ([M+H](+)) at m/z 426 and a corresponding product ion at m/z 174. Detection of ambroxol in human plasma was accurate and precise, with quantification limit at 0.2 ng/ml. This method has been successfully applied to a study of ambroxol in human specimens.     

Liquid/liquid extraction using 96-well plate format in conjunction with hydrophilic interaction liquid chromatography-tandem mass spectrometry method for the analysis of fluconazole in human plasma

A bioanalytical method using automated sample transferring, automated liquid/liquid extraction (LLE) and hydrophilic interaction liquid chromatography-tandem mass spectrometry was developed for the determination of fluconazole in human plasma. Samples of 0.05 ml were transferred into 96-well plate using automatic liquid handler (Multiprobe II). Automated LLE was carried out on a 96-channel programmable liquid handling workstation (Quadra 96) using methyl-tetra butyl ether as the extraction solvent. The extract was evaporated to dryness, reconstituted, and injected onto a silica column using an aqueous-organic mobile phase. The chromatographic run time was 2.0 min per injection, with retention times of 1.47 and 1.44 min for fluconazole and internal standard (IS) ritonavir, respectively. The detection was by monitoring fluconazole at m/z 307-->238 and IS at m/z 721-->296, respectively. The standard curve range was 0.5-100 ng ml(-1). The inter-day precision and accuracy of the quality control samples were <7.1% relative standard deviation and <2.2% relative error.     

High-throughput pharmacokinetics screen of VLA-4 antagonists by LC/MS/MS coupled with automated solid-phase extraction sample preparation

Automation of plasma sample preparation for pharmacokinetic studies on VLA-4 antagonists has been achieved by using 96-well format solid-phase extraction operated by Beckman Coulter Biomek 2000 liquid handling system. A Biomek 2000 robot is used to perform fully automated plasma sample preparation tasks that include serial dilution of standard solutions, pipetting plasma samples, addition of standard and internal standard solutions, performing solid-phase extraction (SPE) on Waters OASIS 96-well plates. This automated sample preparation process takes less than 2 h for a typical pharmacokinetic study, including 51 samples, 24 standards, 9 quality controls, and 3-6 dose checks with minimal manual intervention. Extensive validation has been made to ensure the accuracy and reliability of this method. A two-stage vacuum pressure controller has been incorporated in the program to improve SPE efficiency. This automated SPE sample preparation approach combined with liquid chromatography coupled with the high sensitivity and selectivity of tandem mass spectrometry (LC/MS)/MS has been successfully applied on both individual and cassette dosing for pharmacokinetic screening of a large number of VLA-4 antagonists with a limit of quantitation in the range of 1-5 ng/ml. Consequently, a significant throughput increase has been achieved along with an elimination of tedious labor and its consequential tendency to produce errors.     

高通量甲基衍生化固相萃取LC-MS/MS法定量测定人血浆内的米诺膦酸

采用氘代米诺膦酸为内标,建立了高通量衍生化固相萃取LC-MS/MS的定量方法检测人血浆中的米诺膦酸(1)。将血浆样品300μl上样于弱阴离子交换96孔固相萃取板上,配合正压装置在pH 7.0避光条件下与三甲基硅烷化重氮甲烷(TMS-DAM)发生衍生化反应,洗脱液于烘箱70℃反应1 h使衍生化完全。以Eclipse XDB苯基柱为色谱柱,流动相为乙腈∶含0.15%甲酸10 mmol/L乙酸铵溶液,线性梯度洗脱。采用电喷雾离子源(ESI),正离子模式,以多反应监测(MRM)扫描方式进行监测,用于定量分析的离子对为m/z 393.2→m/z 267.1(五甲基米诺膦酸)和m/z 397.1→m/z271.2(D4-五甲基米诺膦酸)。本法线性范围为10~1 500 pg/ml,批内RSD为2.6%~7.5%,批间RSD为2.5%~7.9%;本法提取回收率为89.7%~96.8%,基质效应为96.9%~102.3%。本方法灵敏、快速、高通量,可用于人血浆中1的含量测定和临床研究。     

Quantitative analysis of simvastatin and its beta-hydroxy acid in human plasma using automated liquid-liquid extraction based on 96-well plate format and liquid chromatography-tandem mass spectrometry

An assay based on automated liquid-liquid extraction (LLE) and liquid chromatography-tandem mass spectrometry (LC/MS/MS) has been developed and validated for the quantitative analysis of simvastatin (SV) and its beta-hydroxy acid (SVA) in human plasma. A Packard MultiProbe II workstation was used to convert human plasma samples collected following administration of simvastatin and quality control (QC) samples from individual tubes into 96-well plate format. The workstation was also used to prepare calibration standards and spike internal standards. A Tomtec Quadra 96-channel liquid handling workstation was used to perform LLE based on 96-well plates including adding solvents, separating organic from aqueous layer and reconstitution. SV and SVA were separated through a Kromasil C18 column (50 mm x 2 mm i.d., 5 microm) and detected by tandem mass spectrometry with a TurboIonspray interface. Stable isotope-labeled SV and SVA, 13CD(3)-SV and 13 CD(3)-SVA, were used as the internal standards for SV and SVA, respectively. The automated procedures reduced the overall analytical time (96 samples) to 1/3 of that of manual LLE. Most importantly, an analyst spent only a fraction of time on the 96-well LLE. A limit of quantitation of 50 pg/ml was achieved for both SV and SVA. The interconversion between SV and SVA during the 96-well LLE was found to be negligible. The assay showed very good reproducibility, with intra- and inter-assay precision (%R.S.D.) of less than 7.5%, and accuracy of 98.7-102.3% of nominal values for both analytes. By using this method, sample throughput should be enhanced at least three-fold compared to that of the manual procedure.     

High-throughput simultaneous determination of the HIV protease inhibitors indinavir and L-756423 in human plasma using semi-automated 96-well solid phase extraction and LC-MS/MS

A method for the simultaneous determination of the HIV protease inhibitors indinavir and L-756423, in human plasma has been developed. Plasma samples (0.5 ml) were extracted using a 3M Empore 96-well plate in the mixed phase cation exchange (MPC) format. The extraction method was automated through the application of both the Packard 204DT and TOMTEC Quadra 96 work stations, and the resulting extracts were analyzed using a PE-Sciex API-3000 LC-MS/MS with a heated nebulizer interface (500 degrees C). The assay was linear in the concentration range 1-2500 ng/ml for indinavir and 5 2500 ng/ml for L-756423 when 0.5-ml aliquots of plasma were extracted. Recoveries of indinavir and L-756423 were greater than 76 and 80%, respectively, over the calibration curve range when using the described sample preparation method. Within-batch precision and accuracy for the quantitation of indinavir over the range 1-2500 ng/ml were 5.4% R.S.D. or less and within 4.0%, respectively. Within-batch precision and accuracy for the quantitation of L-756423 over the range 5-2500 ng/ml were 5.3% R.S.D. or less and within 3.4%, respectively. Interbatch variability for the analysis of indinavir QC samples at low (3 ng/ml), middle (250 ng/ml) and high (2250 ng/ml) were 3.2, 2.9, and 1.9%, respectively. Interbatch variability for the analysis of L-756423 QC samples at low (15 ng/ml), middle (250 ng/ml) and high (2250 ng/ml) concentration were 2.0, 2.5, and 3.3%, respectively. The validated assay was used in support of human clinical trials.     

A new approach to the application of solid phase extraction disks with LC-MS/MS for the analysis of drugs on a 96-well plate format

A new 96-well disk solid phase extraction sample preparation technique which does not involve vacuum pumps integrated with liquid chromatographic tandem mass spectrometric (LC–MS/MS) was developed for high throughput determination of benzodiazepines (nordiazepam, diazepam, lorazepam and oxazepam). In addition, the method completely allows the re-use of the SPE disk membranes for subsequent analyses after re-conditioning. The method utilizes a robotic autosampler for parallel extractions in a 96-well plate format. Results have been presented for independent extractions from three matrices; phosphate buffer solution, urine, and plasma. Factors affecting data reproducibility, extraction kinetics, sample throughput, and reliability of the system were investigated and optimized. A total time required per sample was 0.94 min using 96-well format. Method reproducibility was ≤9% relative standard deviation for all three matrices. Limits of detection and quantitation recorded were respectively in the range 0.02–0.15 and 0.2–2.0 ng/mL with linearity ranging from 0.2 to 500 ng/mL for all matrices.     

LC-MS-MS determination of nemorubicin (methoxymorpholinyldoxorubicin,PNU-152243A) and its 13-OH metabolite (PNU-155051A) in human plasma

A selective and sensitive liquid chromatography-tandem mass spectrometry (LC-MS-MS) method for quantitative determination of nemorubicin, (PNU-152243A, 3'-deamino-3'[2(S)-methoxy-4-morpholinyl]doxorubicin) hydrocloride and its reduced metabolite PNU-155051 in human plasma has been developed and validated. The method involved solid phase extraction (SPE) in 96-well plates. Plasma samples (0.5 ml plasma, spiked with doxorubicin as internal standard and diluted with 0.5 ml of 0.01 M borate buffer, pH 8.4) were extracted using Oasis HLB SPE material. The elution of PNU-152243, PNU-155051 and of IS was performed with 1 ml of methanol:0.1 M formic acid mixture (90:10, v/v). The organic phase was reduced to dryness under a stream of nitrogen at 20 degrees C and the residue was reconstituted with 0.25 ml of 10 mM ammonium formate buffer pH 4.15:acetonitrile mixture (90:10, v/v). Aliquots of 60 microl of the resulting solution were injected onto the LC-MS-MS system. A Zorbax SB C18 column (2.1 x 150 mm, 3.5 microm) was used to perform the chromatographic analysis. The mobile phase consisted of ammonium formate buffer 10 mM pH 4.15:acetonitrile (73:27, v/v) with a flow-rate of 0.2 ml/min. Detection was achieved by a PE-SCIEX API 3000 with Turbo IonSpray interface, and multiple reaction monitoring (645 --> 321 for PNU-152243, 647 --> 363 for PNU-155051 and 545 --> 345 m/z for doxorubicin) operated in positive ion mode. A weighted linear regression was used to calculate PNU-152243 and PNU-155051 concentrations in QC and unknown samples. Linearity, precision, accuracy and recovery of the method were evaluated over the concentration range of 0.1-5 ng/ml for both compounds. No interference from blank human plasma was observed. The suitability of the method for in vivo samples was assessed by the analysis of samples obtained from patients who had received a single intrahepatic artery dose of PNU-152243A.     

Development of a sensitive bioanalytical method for determination of PNU-83757 in rat,monkey and human plasma: from LC-UV to LC-MS/MS

To support pre-clinical pharmacokinetic/toxicokinetic (PK/TK) evaluation, a sensitive bioanalytical method for determination of N-cyano-N'-(tert-pentyl)-N"-(3-pyridinyl) guanidine (PNU-83757), in rat and monkey plasma was required. Although the UV response of PNU-83757 was quite decent and the extracts using solid phase extraction (SPE) were very selective and concentrated, the best limit of quantitation (LOQ) achieved was 0.4 ng ml(-1) using 0.5 ml plasma for extraction and 2 ng ml(-1) using 0.1 ml plasma for extraction, which was insufficient for PK/TK evaluation at lower doses. When using liquid chromatography with atmospheric pressure chemical ionization tandem mass spectrometric detection (LC-APCI-MS/MS, positive ions) and SPE, a LOQ of 0.045 ng ml(-1) for PNU-83757 was reached. Quantitation was accomplished using the precursor --> product ion combinations of m/z 232 --> 162 for PNU-83757 and m/z 236 --> 166 for the internal standard, [2H(4)]PNU-83757, in the multiple reaction monitoring mode. This method has been successfully utilized for PK/TK evaluation in pre-clinical studies and proved to have sufficient sensitivity to determine plasma concentrations for a dose level as low as 1 microg kg(-1) day(-1) in the rat and monkey. Further improvement of this method by using electrospray mass spectrometric detection (LC-ESI-MS/MS, positive ions) and automated membrane SPE, gave an LOQ of 0.008 ng ml(-1), and allowed analysis of large numbers of samples to support clinical PK studies in microg dose levels.     

Determination of monomethylarsonic acid and dimethylarsinic acid in urine by liquid chromatography-tandem mass spectrometry.

A method for the simultaneous measurement of monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA) in human urine using liquid chromatography-tandem mass spectrometry with electrospray ionization (LC-ES-MS-MS) was developed. The multiple reaction monitoring mode (MRM) was used for quantitation. The protonated molecule ions (m/z 141.0 for MMA and m/z 139.0 for DMA) were selected as precursor ions, and the same fragment ion AsO+ (m/z 91.1) was monitored as the product ion. A two-step liquid-liquid extraction of MMA and DMA from urine provided recoveries of 92-100%. The coefficients of variation were lower than 7% for the within-day precision and lower than 11% for the between-day precision. The limit of quantitation was 25 microg/L as As for the two analytes. The assay was linear over the range of 25-800 microg/L.     

Automated 96-well liquid-liquid back extraction liquid chromatography-tandem mass spectrometry method for the determination of ABT-202 in human plasma

A high-throughput bioanalytical method using automated sample transferring, automated liquid-liquid back extraction and liquid chromatography-tandem mass spectrometry was developed in a GLP regulated environment for the determination of ABT-202 in human plasma. Samples of 0.30 ml were transferred into 96-well plate using an automatic liquid handler. Automated liquid-liquid extraction (LLE) was carried out on a 96-channel programmable liquid handling workstation using methyl tert-butyl ether as the extraction solvent. A dual-HPLC with single mass spectrometer configuration was utilized to provide a reliable and routine means to increase sample throughput. The standard curve range was 0.38-95.02 ng/ml. There was no interference from endogenous components in the blank plasma tested. The accuracy (% bias) at the lower limit of quantitation (LLOQ) was 7.7% and the precision (% CV) for samples at the LLOQ was 4.7%. The inter-day % CV and % bias of the quality control samples were < or = 6.8 and < or = 7.6%, respectively. Coefficients of determination, a measure of linearity, ranged from 0.994 to 0.997. The method was accurate and reproducible and was successfully applied to generate plasma concentration-time profiles for human subjects after low oral doses of the compound.     

Strategy for structure elucidation of drug metabolites derived from protonated molecules and (MS)n fragmentation of zotepine, tiaramide and their metabolites

TSQ ESI MS/MS and ion trap ESI MS(2) cleave protonated molecules. MS(2) at m/z 332 of zotepine cleaved m/z 245 (10%), m/z 287 (5%) and m/z 315 (100%) fragment ions at protonated positions. MS(2) at m/z 356 of tiaramide cleaved m/z 338 (18%), 313 (10%), 226 (100%), 198 (78%) and 131 (60%) fragment ions at protonated positions. The ESI ion trap MS produced new internal protonated molecules in an ion trap, such as m/z 113 and m/z 88 from m/z 131 protonated piperazinonium, and m/z 245 protonated 8-chloro dibenzo[b,f]thiepin. ESI ion trap (MS)(n) (n>or=3) cleaved new internal protonated molecules. It also causes carbocation cleavage, alpha cleavage, onium cleavage and McLafferty cleavage. We can easily elucidate the structure of metabolites from the difference in m/z of corresponding fragments between unchanged compound and its metabolite. Reactive oxygen diradicals involved in cytochrome P-450 cycles react with electron rich groups and reactive C-H bonds of zotepine and tiaramide to produce metabolites of 2-hydroxyzotepine, 3-hydroxyzotepine, norzotepine, zotepine-N-oxide, zotepine-S-oxide, Tiaramide carboxylic acid, dehydroxyethyltiaramide and tiaramide-N-oxide. The strategy for structure elucidation of drug metabolites was established on the basis of the reactivity of unchanged drug with reactive oxygen diradicals involved in cytochrome P-450 cycles and theory associated with protonated molecules and (MS)(n) fragmentation of drug metabolites.     

A sensitive LC/MS/MS method using silica column and aqueous-organic mobile phase for the analysis of loratadine and descarboethoxy-loratadine in human plasma

A sensitive method using liquid chromatography with tandem mass spectrometric detection (LC/MS/MS) was developed and validated for the simultaneous analysis of antihistamine drug loratadine (LOR) and its active metabolite descarboethoxy-loratadine (DCL) in human plasma. Deuterated analytes, i.e. LOR-d(3) and DCL-d(3) were used as the internal standards (I.S.). Analytes were extracted from alkalized human plasma by liquid/liquid extraction using hexane. The extract was evaporated to dryness under nitrogen, reconstituted with 0.1% (v/v) of trifluoroacetic acid (TFA) in acetonitrile, and injected onto a 50 x 3.0 mm I.D. 5 microm, silica column with an aqueous-organic mobile phase consisted of acetonitrile, water, and TFA (90:10:0.1, v/v/v). The chromatographic run time was 3.0 min per injection and flow rate was 0.5 ml/min. The retention time was 1.2 and 2.0 min for LOR and DCL, respectively. The tandem mass spectrometric detection was by monitoring singly charged precursor-->product ion transitions: 383-->337 (m/z) for LOR, 311-->259 (m/z) for DCL, 388-->342 (m/z) for LOR-d(3), and 316-->262 (m/z) for DCL-d(3). The low limit of quantitation (LLOQ) was 10 pg/ml for LOR and 25 pg/ml for DCL. The inter-day precision of the quality control (QC) samples was 3.5-9.4% relative standard deviation (R.S.D.). The inter-day accuracy of the QC samples was 99.0-107.9% of the nominal values.     

Semi-automated 96-well liquid-liquid extraction for quantitation of drugs in biological fluids

A semi-automated liquid-liquid extraction (LLE) technique for biological fluid sample preparation was introduced for the quantitation of four drugs in rat plasma. All liquid transferring during the sample preparation was automated using a Tomtec Quadra 96 Model 320 liquid handling robot, which processed up to 96 samples in parallel. The samples were either in 96-deep-well plate or tube-rack format. One plate of samples can be prepared in approximately 1.5 h, and the 96-well plate is directly compatible with the autosampler of an LC/MS system. Selection of organic solvents and recoveries are discussed. Also, precision, relative error, linearity and quantitation of the semi automated LLE method are estimated for four example drugs using LC/MS/MS with a multiple reaction monitoring (MRM) approach. The applicability of this method and future directions are evaluated.     

Quantification of N-acetyl-seryl-aspartyl-lysyl-proline in hemodialysis patients administered angiotensin-converting enzyme inhibitors by stable isotope dilution liquid chromatography-tandem mass spectrometry

We developed a sensitive, selective and accurate method based on liquid chromatography with tandem mass spectrometry (LC-MS/MS) to determine N-terminal thymosin-β peptides of Ac-SDKP and Ac-ADKP in human plasma samples. Quantification of Ac-SDKP and Ac-ADKP was performed using solid phase extraction (SPE) based on C(18), reversed phase LC separation, and stable isotope dilution electrospray ionization-MS/MS in multiple reaction-monitoring (MRM) mode. The Ac-SDKP-(13)C(6), (15)N(2) and Ac-ADKP-d(7) were synthesized for the internal standards. These MRM monitoring ions were m/z 488→129 (quantitative ion)/226 for Ac-SDKP, m/z 496→137 for Ac-SDKP-(13)C(6), (15)N(2), m/z 472→129 (quantitative ion)/226 for Ac-ADKP, and m/z 479→129 for Ac-ADKP-d(7), respectively. Lower limit of quantitation (LLOQ) of Ac-SDKP and Ac-ADKP was 0.1ng/mL in human plasma. Recovery values were ranged from 94.7% to 106.3% for inter- (RSD: 0.6-3.5%) and intra- (RSD: 0.4-4.9%) day assays. Plasma Ac-SDKP levels were significantly higher in hemodialyzed subjects treated with angiotensin-converting enzyme inhibitors of enalapril (27.3±24.6ng/mL, n=10) and trandolapril (12.3±16.9ng/mL, n=18) than healthy (0.4±0.2ng/mL, n=7) and hemodialyzed subjects (0.6±0.2ng/mL, n=34). This analytical method would be useful to measure N-terminal thymosin-β peptides in human plasma for the clinical study.     

Development and validation of a method for quantitative determination of valsartan in human plasma by liquid chromatography-tandem mass spectrometry

A sensitive liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the determination of valsartan in human plasma was developed and validated. A 0.5 ml aliquot was extracted using solid-phase extraction in an Empore^® high performance extraction disk plate, universal resin 96-well format. The estimated calibration range of the method was 2–2000 ng/ml.

The method was fully validated with intra-day mean accuracy and precision of 94.8–107% and 2.19–5.40% and inter-day mean accuracy and precision of 93.5–105% and 1.87–5.67%, respectively. No significant loss of valsartan in processed samples was confirmed in processed samples for up to 24 h at 10 °C. Sample dilution up to 50-fold with blank human plasma provided acceptable analyses. No interference peaks or matrix effects were observed. No effect of QC sample location results was observed in a 96-well plate. This LC-MS/MS technique was found to improve quantitative determination of valsartan allowing its pharmacokinetic evaluation with clinically relevant doses.