Arthroscopic double-bundled posterior cruciate ligament reconstruction with quadriceps tendon–patellar bone autograft

Summary: An arthroscopic technique for double-bundled reconstruction for posterior cruciate ligament with quadriceps tendon–patellar bone autograft is presented. Anterolateral and posteromedial tunnels were created to simulate and reproduce the double-bundle structure of the posterior cruciate ligament. The bone plug is situated at the tibial tunnel and fixed by a titanium interference screw. Each of the bundles of tendon graft is rigidly fixed at the femoral tunnel with a bioabsorbable screw.Arthroscopy: The Journal of Arthroscopic and Related surgery, Vol 16, No 7 (October), 2000: pp 780–782     

Lateral collateral ligament reconstruction using quadriceps tendon–patellar bone autograft with bioscrew fixation

The lateral collateral ligament is the primary stabilizer against varus stress and is also an important contributor in maintaining posterolateral knee stability. Quadriceps tendon–patellar bone autograft has been used for anterior or posterior cruciate ligament reconstruction. We introduce a reconstructive procedure to restore the lateral collateral ligament using a quadriceps tendon–patellar bone autograft. The procedure is designed for unstable knees with concomitant cruciate ligament tear and posterolateral complex injury. This is a reasonable choice especially when allograft tissue is not available or in patients who are not suited for the use of bone–patellar tendon–bone autograft.Arthroscopy: The Journal of Arthroscopic and Related Surgery, Vol 17, No 5 (May-June), 2001: pp 551–554     

Bone–patellar tendon–bone autograft versus LARS artificial ligament for anterior cruciate ligament reconstruction

The optimized graft for use in anterior cruciate ligament (ACL) reconstruction is still in controversy. The bone–patellar tendon–bone (BPTB) autograft has been accepted as the gold standard for ACL reconstruction. However, donor site morbidities cannot be avoided after this treatment. The artificial ligament of ligament advanced reinforcement system (LARS) has been recommended for ACL reconstruction. The purpose of this study is to compare the midterm outcome of ACL reconstruction using BPTB autografts or LARS ligaments. Between July 2004 and March 2006, the ACL reconstruction using BPTB autografts in 30 patients and LARS ligaments in 32 patients was performed. All patients were followed up for at least 4 years and evaluated using the Lysholm knee score, Tegner score, International Knee Documentation Committee (IKDC) score, and KT-1000 arthrometer test. There were no significant differences between the two groups with respect to the data of Lysholm scores, Tegner scores, IKDC scores, and KT-1000 arthrometer test at the latest follow-up. Our study demonstrates that the similarly good clinical results are obtained after ACL reconstruction using BPTB autografts or LARS ligaments at midterm follow-up. In addition to BPTB autografts, the LARS ligament may be a satisfactory treatment option for ACL rupture.     

Biomechanical testing of quadriceps tendon–patellar bone grafts: an alternative graft source for press-fit anterior cruciate ligament reconstruction?

Introduction: Press-fit fixation of bone-patellar tendon–bone (BPTB) grafts in anterior cruciate ligament (ACL) reconstruction has been analyzed biomechanically in previous studies; however, the use of quadriceps tendon–patellar bone (QTPB) grafts has not been studied so far. It is hypothesized that QTPB grafts provide primary fixation strength comparable to BPTB grafts in press-fit ACL reconstruction with respect to bone plug length and loading angle. Materials and methods: Fifty-two QTPB grafts were harvested from fresh human cadaver knees (mean age 73.3 years) with the length of the patellar bone plug being either 15 mm (Group I) or 25 mm (Group II). The grafts were anchored within fresh porcine femora (mean age 12 months) using a press-fit fixation technique. Forty-eight specimens were loaded to failure at 10 mm/s with varying loading angles of 0°, 30°, and 60° until failure. A microradiographic pre–post-implantation analysis was conducted on four grafts. Results: The biomechanical testing showed a significant difference in the ultimate failure loads comparing Group I (mean 224±79.3 N) to Group II (mean 339±61.4 N), both showing mean ultimate failure loads to increase with rising loading angle. The predominant mode of failure was graft pullout at axial loading and tendon rupture at 60° loading angle. The microradiographic analysis revealed an iatrogenic damage of the bone–tendon junction on the cancellous aspect of the bone plug in all trials, corresponding with the site of impactor placement during implantation. Conclusion: QTPB grafts provide a loading capability comparable to BPTB grafts in press-fit ACL reconstruction. The broad and profound area of quadriceps tendon attachment to the patellar bone plug makes graft implantation demanding.     

Patellar tendon rupture 3 years after anterior cruciate ligament reconstruction with a central one third bone–patellar tendon–bone graft

Use of the central one third bone–patellar tendon–bone autograft is an accepted technique for anterior cruciate ligament (ACL) reconstruction. Patellar tendon rupture following ACL reconstruction is an acknowledged, although rarely reported, complication of this procedure. Of the limited patellar tendon rupture cases reported in the literature, most are described early in the postoperative period. We present a case of late patellar tendon rupture more than 3 years after uneventful ACL reconstruction in a 32-year-old man.Arthroscopy: The Journal of Arthroscopic and Related Surgery, Vol 17, No 6 (July-August), 2001: pp 648–652     

Simultaneous reconstruction of anterior cruciate ligament and posterior cruciate ligament by using allogeneic patellar tendon under arthroscopy

With fast development of arthroscopic surgery inChina, simple reconstruction of ACL (anteriorcrucial ligament) or PCL has been reported in number. However , the methods concerningsimultaneous reconstruction of ACL and PCL are rarelyreported. Simultaneous …     

Arthroscopic single-bundle reconstruction of posterior cruciate ligament with quadrupled hamstring tendon

Objective： To evaluate the technique and outcome of arthroscopic sipy, le-bundie reconstruction of posterior crudate ligament （PCL） with quadrupled hamstring tendon. Methods： From April 2001 to October 2004, 49 knees with PCL tears in 49 patients were verified with arthroscope in this department. Of them, 13 were combined with anterior cruciate ligament tears, 14 with disruptions of the posterolateral comer, 6 with ruptures of the posteromedial corner and medial collateral ligament, 9 with lateral meniscus tears, 5 with medial meniscus tears and 2 with popliteal vascular tears. All the damaged PCLs were reconstructed with single-bundie of autogenous quadrupled hamstring tendons under arthroscope. Biodegradable interference screws or blunt titanium interference screws were used for direct anatomic fixation of the reconstructed ligament. Results： After operation, no severe complications occurred at early stage in the 49 patients. All of them were followed up for 10-52 months with an average of 22. 0 months ＋ 10. 7 months. Lysholm score was remarkably improved from 30-60 （ mean： 47.96 ＋ 8. 16） preoperatively to 70-95 （ mean： 89. 08 ＋ 6. 10 ） at the last postoperative follow-up （ P 〈 0.01 ）. Furthermore, there was a significant improvement in International Knee Documentation Committee （IKDC） score from abnormal （ Grade C） in 10 knees and severely abnormal （Grade D ） in 39 preoperatively to normal （ Grade A ） in 20, nearly normal （ Grade B） in 24 and abnormal in 5 at the last follow-up. Of the 49 patients, 40 returned to the same activity level as before and 9 were under the level. Conclusions： Single-bundle reconstruction of PCL with quadrupled hamstring tendons has the advantage of minimal trauma in surgery and satisfactory outcome.     

Is bone tunnel osseointegration in hamstring tendon autograft anterior cruciate ligament reconstruction important?

A 27-year-old man underwent anterior cruciate ligament (ACL) reconstruction using 4-strand hamstring autograft with femoral and tibial interference screw fixation. Four weeks after surgery, he developed a discharging hematoma through the graft harvest-tibial tunnel incision, which persisted. The patient required further surgical intervention 7 weeks after the initial surgery. The wound was debrided, the tibial interference screw was removed, and the tibial tunnel was completely cleared of graft remnants. Arthroscopy of the knee was performed, in which the ACL graft appeared healthy and viable. No evidence of intra-articular sepsis was found. Postoperatively, the rehabilitation program was uneventful and, at 36 months, the patient has unrestricted activity and no clinical evidence of excessive ACL laxity. This case supports the importance of marginal articular surface healing of the ACL graft, suggesting that tibial intratunnel healing becomes redundant.     

Proprioceptive skills and functional outcome after anterior cruciate ligament reconstruction with a bone–tendon–bone graft

Several studies have shown that patients with anterior cruciate ligament (ACL) reconstruction have an improved proprioceptive function compared to subjects with ACL-deficient knees. The measurement of functional scores and proprioception potentially provides clinicians with more information on the status of the ACL-reconstructed knees. To evaluate proprioception in patients following ACL reconstruction with a bone–tendon–bone (BTB) graft, we used the angle reproduction in the sitting, lying and standing positions and the one-leg hop test. Forty-five patients between 19 and 52 years of age were investigated in a 36-month period after the operation. For functional performance measurement, the International Knee Documentation Committee (IKDC) score was used. Very good and good results were seen in 95% of cases. All patients returned to the same activity level as seen before ACL repair. There was a significant difference in the active angle reproduction test between the ACL-reconstructed knees and normal knees in the active sitting position. Tests with passive angle adjustment in the sitting, lying and active standing positions did not show any differences in proprioceptive skills. Good to very good results in the one-leg hop test we found in 95% of patients. After ACL reconstruction, deficiencies in the active angle reproduction test were very small but, nevertheless, were still observed. Overall, the functional and proprioceptive outcomes demonstrate results to recommend the procedure.

---

Résumé  Plusieurs études ont montré que des patients ayant bénéficié d’une reconstruction du ligament croisé antérieur ont été améliorés sur le plan de la fonction proprioceptive surtout si on compare les sujets à des sujets non traités gardant un déficit au niveau du ligament croisé antérieur. La mesure des différents scores, fonction et proprioception, donne un certain nombre d’informations sur ces genoux qui ont été opérés. Nous avons évalué la proprioception de patients opérés par greffes du ligament croisé antérieur par un greffon de type BTB et évalué cette proprioception en position assise, debout, en appui monopodal et après tests de sauts.45 patients entre 19 et 52 ans ont été analysés sur une période de 36 mois après l’intervention chirurgicale. Le score IKDC a également été mesuré. Les résultats ont été considérés comme très bons dans 95% des cas. Les patients ont repris une activité au même niveau que celle qu’ils avaient avant la réparation. Il n’y a pas de différences significatives entre les genoux reconstruits et le genou normal, notamment en ce qui concerne les tests en positions assises. Un très bon résultat des tests de sauts est retrouvé chez 95% des patients. On peut considérer après reconstruction du ligament croisé antérieur, que la récupération fonctionnelle et proprioceptive est excellente et confirme la nécessité de reconstruire les ligaments après rupture.

     

Bone—patellar tendon—bone grafts for anterior cruciate ligament reconstruction: The effects of graft pretensioning

Viscoelastic creep is a well-know phenomenon associated with collagenous soft tissues under sustained tensile load. Despite our understanding of this phenomenon and the potential for “loosening” of the graft over time, pretensioning of bone—patellar tendon—bone (B-PT-B) grafts for reconstruction of the anterior cruciate ligament (ACL) to eliminate this elastic deformation is not commonly practiced. This investigation quantified viscoelastic creep in B-PT-B grafts using both an in vivo and an in vitro model. In vivo, 10-mm B-PT-B grafts were procured and prepared in a standard manner for arthroscopically assisted ACL reconstruction. A total of 153 grafts were evaluated. During preparation, each graft was tensioned using a commercially available graft preparation board (Smith & Nephew DonJoy). An initial tensile load of 2.25 N (0.5 lb) was applied to the graft and a measurement was taken between bone-tendon junctions at either end. A sustained load of 89 N (20 lb) was then applied for a minimum of 4 minutes and the measurement repeated. In the in vitro model, grafts were harvested in a standard manner, then placed in a servohydraulic for tensile loading. A differential variable reluctance transducer was implanted in each graft to quantify net displacement during 15 minutes of sustained tensile loading at 89 N (20 lb). A total of 13 specimens were evaluated. In the in vivo model, mean pretension bone-tendon junction length was 43.6 mm (range, 29 to 64 mm; SD, ± 6.7). Mean post-tension bone-tendon length was 49.6 mm (range, 33 to 71 mm; SD, ± 7.1), representing a mean increase in length of 6.0 mm (range, 2 to 12; SD, ± 2.1) or 14.0% (range, 3.8 to 28.6; SD, ± 5.2). In the in vitro model, the mean pretension tendon length was 42.81 mm (range, 35.20 to 51.48; SD, 4.54). The mean posttension length was 47.11 mm (range, 38.05 to 56.23; SD, ± 5.04) representing a mean increase of 4.30 mm or 10.12%. These data would seem to support the hypothesis that without pretensioning, significant postimplantation graft creep will occur.     

ACL reconstruction using bone–patella tendon–bone autograft: press-fit technique vs. interference screw fixation

Purpose

The gold standard in ACL reconstructions has been the bone–patellar tendon–bone autograft fixed with interference screws. This prospective, randomized clinical trial aimed to compare two methods of fixation for BPTB grafts: press-fit fixation vs. interference screw, over a 12-month follow-up interval.

Methods

158 patients with an average age of 29.8 years, between 2011 and 2012, were treated for torn ACL. 82 patients underwent reconstruction with BPTB autograft with a press fit fixation technique, and in 76 cases an interference screw was used. At the time of final follow-up, 71 patients in press-fit group and 65 patients in interference screw group were evaluated in terms of return to pre-injury activity level, pain, knee stability, range of motion, IKDC score and complications.

Results

At 12-month follow-up, 59 (83 %) and 55 (85 %) in press-fit and screw group, respectively had good-to-excellent IKDC score (p > 0.05). The mean laxity assessed using a KT-1000 arthrometer improved to 2.7 and 2.5 mm in press-fit and screw group, respectively. Regarding Lachman and pivot shift test, there was a statistically significant improvement in the integrity of the ACL in both the groups, but no significant differences was noted between groups. There were no significant differences in terms of femur circumference difference, effusion, knee range of motion, pain and complications.

Conclusions

The press-fit technique is an efficient procedure. Its outcome was comparable with the interference screw group. Furthermore it has unlimited bone-to-bone healing, no need for removal of hardware, ease for revision and cost effectiveness.     

Implant-free press-fit fixation for bone–patellar tendon–bone ACL reconstruction: 10-year results

Objective

The aim of this study is to determine the outcome of anterior cruciate ligament (ACL) reconstruction without foreign material with patellar tendon bone graft in the fixation with bone dowels near the native insertion.

Materials and methods

Between 1998 and 1999, 189 patients were operated with ACL reconstruction with BTB patellar tendon graft. In a prospective study, 148 (78%) (91M, 57F) patients could be seen for a mean follow-up of 10.3 years. All had foreign material-free press-fit and a bottom-to-top (BTT) fixation in 120° knee flexion. All patients were evaluated with detailed history, clinical examinations, radiographic examination with weight bearing which could be compared to the time of surgery in 64 (43%) patients. Laxity testing was performed in Lachman position with the Rolimeter and pivot shift. All patients were graded according to the IKDC and Tegner activity score.

Results

87% of the patients achieved an IKDC score of A/B. The subjective IKDC score was A/B in 94.6% of the subjects. The average side-to-side difference was 1.42 ± 0.88 mm for the Lachman test, 97% of the patients were rated between 0 and 2 mm. The pivot-shift test was negative in 90% and was observed with a glide in 7% of the patients. Radiological joint space narrowing was found in the medial compartment in 8 (12.4%) cases, and laterally in 9 (14.1%) cases. All these patients had partial or total meniscus resections. The patello-femoral joint space was reduced in 21 (23%) cases. The Tegner activity score changed from 6.9 pre-injury to 5.0 at the 10-year follow-up.

Conclusion

The implant-free fixation of the graft with bone dowels and BTT implantation has good and excellent results after 10 years in more than 80% of the patients. Loss of the meniscus is a main factor contributing to osteoarthritis. Advantages of patellar tendon bone press-fit fixation include anatomical positioning and fast bone-to-bone healing, ease for revision surgery and cost effectiveness.     

Tibial tunnel enlargement after anatomic anterior cruciate ligament reconstruction with a bone–patellar tendon–bone graft. Part 1: Morphological change in the tibial tunnel

BackgroundThree-dimensional (3D) computed tomography (CT) is reliable and accurate imaging modality for evaluating tunnel enlargement after anterior cruciate ligament (ACL) reconstruction. The purpose of this study was to evaluate the tibial tunnel enlargement including the morphological change after anatomic ACL reconstruction with a bone–patellar tendon–bone (BTB) graft using 3D CT models.MethodsEighteen patients with unilateral ACL rupture were included. The anatomic rectangular-tunnel (ART) ACL reconstruction with a BTB autograft was performed. 3D CT models of the tibia, the tibial tunnel, and the bone plug at 3 weeks and 1 year after surgery were reconstructed and superimposed using a surface registration technique. The cross-sectional area (CSA) of the tibial tunnel perpendicular to the tunnel axis was evaluated at the aperture and 5, 10, and 15-mm distal from the aperture. The CSA was measured at 3 weeks and 1 year after surgery and compared between the two time points. The locations of the center and the anterior, posterior, medial, and lateral edges of the tunnel footprint were also evaluated based on the coordinate system for the tibial plateau and compared between the two time points.ResultsAt the aperture, the CSA of the tibial tunnel at 1 year after surgery was significantly larger by 21.9% than that at 3 weeks (P < 0.001). In contrast, the CSA at 1 year was significantly smaller than that at 3 weeks at 10 and 15-mm distal from the aperture (P = 0.041 and < 0.001, respectively). The center of the tunnel footprint significantly shifted postero-laterally with significant posterior shift of the anterior/posterior edges and lateral shift of the lateral edge (P < 0.001).ConclusionThe tibial tunnel enlarged at the aperture by 22% 1-year after anatomic ACL reconstruction with a BTB graft, and the tunnel morphology changed in a postero-lateral direction at the aperture and into conical shape inside the tunnel.     

A follow-up study of arthroscopic combined reconstruction of anterior and posterior cruciate ligaments with allograft patellar tendon

Objective： To evaluate the therapeutic effect of combined reconstruction of anterior cruciate ligament （ ACL ） and posterior cruciate ligament （ PCL ） simultaneously by using allograft patellar tendon under arthroscopy. Methods： From May 2003 to November 2005, 10 cases of ruptured ACL and PCL were fixated with compressed screws and reconstructed under arthroscopy with allograft patellar tendon simultaneously. The clinical results were evaluated according to IKDC, Lysholm, and Tegner clinical rating scales. Results. All patients were followed up for 12-30 months （mean： 18 months ）. At the last follow-up, there was no knee extension limitation and knee flexion was between 120° and 135°, with an average of 128.38°. The Lysholm score of the 10 cases was 66. 5 ± 5. 6 before operation and 89.8 ± 3.4 at last follow up. The difference was statistically significant （ P 〈 0.01 ）. The average Tegner activity score decreased from 6.9 ± 1.7 （ range ： 4-9 ） before injury to 5.5 ± 1. 6 （rang： 2-9） at the follow-up （P=0.53）. At the end of follow-up, IKDC score was graded as A in 4 cases （40.0 % ）, B in 5 （50.0 % ）, and C in 1 （10.0%）. Of the 10 patients, 8 returned to the same sports level as before injury and 2 were under the level. Conclusion. Arthroscopic combined reconstruction of ACL and PCL with allograft patellar tendon has the advantages of minimal trauma in surgery and reliable satisfactory outcome.     

Tibial tunnel enlargement after anatomic anterior cruciate ligament reconstruction with a bone–patellar tendon–bone graft. Part 2: Factors related to the tibial tunnel enlargement

BackgroundFactors related to tunnel enlargement after anterior cruciate ligament (ACL) reconstruction should be evaluated by multivariate analysis, because the phenomenon has multifactorial characteristics. The purpose of this study was to elucidate the factors related to the tibial tunnel enlargement rate after anatomic ACL reconstruction with a bone–patellar tendon–bone (BTB) graft using multivariate analysis.MethodsEighteen patients with unilateral ACL rupture were included. The anatomic rectangular-tunnel (ART) ACL reconstruction with a BTB autograft was performed. 3D CT models of the tibia, the tibial tunnel, and the bone plug at 3 weeks and 1 year after surgery were reconstructed and superimposed using a surface registration technique. The cross-sectional area (CSA) of the tibial tunnel perpendicular to the tunnel axis was evaluated at the aperture. The CSA was measured at 3 weeks and 1 year after surgery, and the tunnel enlargement rate at the aperture was calculated. Multiple linear regression analysis was performed to detect the significantly related factors to the tibial tunnel enlargement rate at the aperture among potential factors consisting of preoperative demographic factors and predisposing factors with the tibial tunnel.ResultsThe tibial tunnel enlargement rate at the aperture was 21.9 ± 14.1% (mean ± standard deviation). Multiple linear regression analysis detected the tendon length inside the tunnel as a significantly independent factor related to the tibial tunnel enlargement rate at the aperture (standardized β = 0.726, P = 0.008). There was no significant relationship between the tibial tunnel enlargement rate at the aperture and postoperative side-to-side difference (SSD) of the anterior knee laxity or Tegner activity level scale under single linear regression analysis.ConclusionThe greater tendon length inside the tunnel was independently related to the higher tibial tunnel enlargement rate at the aperture 1-year after anatomic ACL reconstruction with a BTB graft under multiple linear regression analysis.     

Arthroscopic posterior cruciate ligament reconstruction by using hamstring tendon autograft and transosseous screw fixation: minimal 3 years follow-up

Background

The aim of this trial is to prospectively evaluate the outcomes of PCL reconstruction by means of quadruple hamstring tendon autograft with a double-fixation method at minimal 3-year follow-up.

Materials and methods

Only patients who underwent PCL reconstruction without any other concomitant injury were included in this study. A hamstring tendon graft is composed of a quadruple-stranded gracilis tendon and semitendinosus tendon about 10 cm in length. An arthroscopic technique via a two incision and a double-fixation method was applied. Clinical evaluations were performed for 52 patients. Clinical assessment of patients included the Lysholm knee scores, International Knee Documentation Committee (IKDC) scores, thigh muscle evaluation, and radiographic investigation.

Results

On the Lysholm knee score, 90 % of the patients displayed good or excellent rating in the final assessment. In the IKDC rating analyses, 60 % of the patients demonstrated 3–5-mm ligament laxity. For the IKDC final rating, 81 % were normal or nearly normal. Seventy-nine percent of the cases revealed less than a 10-mm difference in thigh girth between their reconstructed and contra lateral limbs.

Conclusion

Arthroscopic PCL reconstruction using quadruple hamstring tendon autograft provides acceptable outcomes at a minimum 3-year follow-up. The four-stranded hamstring tendon graft is suitable in graft size and results in minimal harvesting morbidity. We recommend that quadruple hamstring tendon graft be chosen for PCL reconstruction to achieve good ligament reconstruction. A double-fixation method which has been applied in this trial can be used to provide rigid fixation.     

Hamstring tendon anterior cruciate ligament reconstruction: does gracilis tendon harvest matter?

Purpose

Hamstring tendon grafts are a popular choice for anterior cruciate ligament (ACL) reconstruction. Typical morbidity reported after hamstring tendon harvest is muscle weakness in flexion, and whilst still a matter for debate, this morbidity may be greater if the gracilis tendon is harvested in addition to the semitendinosus. This study sought to comprehensively compare the outcome of ACL reconstructions in which the semitendinosus was harvested alone (ST group) or with the gracilis (ST/G group).

Methods

Twenty patients (ten ST, ten ST/G) were assessed with a variety of measures that included subjective scores, function, strength and tibial rotation as measured by gait analysis during a pivoting task.

Results

Results showed that the graft diameter was significantly larger in the ST group, but there were no other differences between the groups for any other outcome measure.

Conclusion

Harvesting the gracilis in addition to semitendinosus does not appear to affect either the outcome or graft-related morbidity after hamstring ACL reconstruction.