Physicochemical characterization of solid dispersions of the antiviral agent UC-781 with polyethylene glycol 6000 and Gelucire 44/14

The purpose of this study was to prepare and characterize solid dispersions of the antiviral thiocarboxanilide UC-781 with PEG 6000 and Gelucire 44/14 with the intention of improving its dissolution properties. The solid dispersions were prepared by the fusion method. Evaluation of the properties of the dispersions was performed using dissolution studies, differential scanning calorimetry, Fourier-transform infrared spectroscopy and X-ray powder diffraction. To investigate the possible formation of solid solutions of the drug in the carriers, the lattice spacings [d] of PEG 6000 and Gelucire 44/14 were determined in different concentrations of UC-781. The results obtained showed that the rate of dissolution of UC-781 was considerably improved when formulated in solid dispersions with PEG 6000 and Gelucire 44/14 as compared to pure UC-781. From the phase diagrams of PEG 6000 and Gelucire 44/14 it could be noted that up to approximately 25% w/w of the drug was dissolved in the liquid phase in the case of PEG 6000 and Gelucire 44/14. The data from the X-ray diffraction showed that the drug was still detectable in the solid state below a concentration of 5% w/w in the presence of PEG 6000 and Gelucire 44/14, while no significant changes in the lattice spacings of PEG 6000 or Gelucire 44/14 were observed. Therefore, the possibility of UC-781 to form solid solutions with the carriers under investigation was ruled out. The results from infrared spectroscopy together with those from X-ray diffraction and differential scanning calorimetry showed the absence of well-defined drug–polymer interactions.     

Studies on dissolution enhancement and mathematical modeling of drug release of a poorly water-soluble drug using water-soluble carriers.

Role of various water-soluble carriers was studied for dissolution enhancement of a poorly soluble model drug, rofecoxib, using solid dispersion approach. Diverse carriers viz. polyethylene glycols (PEG 4000 and 6000), polyglycolized fatty acid ester (Gelucire 44/14), polyvinylpyrollidone K25 (PVP), poloxamers (Lutrol F127 and F68), polyols (mannitol, sorbitol), organic acid (citric acid) and hydrotropes (urea, nicotinamide) were investigated for the purpose. Phase-solubility studies revealed AL type of curves for each carrier, indicating linear increase in drug solubility with carrier concentration. The sign and magnitude of the thermodynamic parameter, Gibbs free energy of transfer, indicated spontaneity of solubilization process. All the solid dispersions showed dissolution improvement vis-à-vis pure drug to varying degrees, with citric acid, PVP and poloxamers as the most promising carriers. Mathematical modeling of in vitro dissolution data indicated the best fitting with Korsemeyer-Peppas model and the drug release kinetics primarily as Fickian diffusion. Solid state characterization of the drug-poloxamer binary system using XRD, FTIR, DSC and SEM techniques revealed distinct loss of drug crystallinity in the formulation, ostensibly accounting for enhancement in dissolution rate.     

Physical Stability of Solid Dispersions Containing Triamterene or Temazepam in Polyethylene Glycols

The effect of storage on the physical stability of solid dispersions of triamterene or temazepam in polyethylene glycols was studied using differential scanning calorimetry (DSC), particle-size analysis and dissolution methods. The enthalpies of fusion of the carriers, without included drug and previously fused and crystallized, increased on storage. Analysis of similarly treated solid dispersions, containing either 10% temazepam or 10% triamterene, showed that each drug influenced the morphology of the polyethylene glycol (PEG). The enthalpies and melting points of the solidus components of the dispersions' carriers were initially reduced after preparation, but on storage these increased. The particle sizes of the drugs dispersed in the PEGs increased on storage. The changes in dissolution after storage of triamterene or temazepam dispersions were smaller for dispersions in PEG 1500 than for dispersions in PEGs of higher molecular weight (PEG 2000, PEG 4000 or PEG 6000) in which the reduction in dissolution was particularly marked during the first month of storage. The rank order of changes in dissolution were PEG 1500 ? PEG 2000 < PEG 4000 ～ PEG 6000.     

Solid dispersion adsorbates for enhancement of dissolution rates of drugs

Amalgamation of solid dispersion and melt adsorption technologies was utilized for enhancing the dissolution rate of poorly soluble drugs. Glibenclamide was employed as a model drug. PEG6000 and Gelucire44/14 were used as hydrophilic carriers for the preparation of solid dispersions, and lactose was utilized as an adsorbent for the preparation of solid dispersion adsorbates. A high dissolution rate of solid dispersion adsorbates was observed when compared to solid dispersions alone and one of the marketed products.     

Solid state properties of pure UC-781 and solid dispersions with polyvinylpyrrolidone (PVP K30)

The purpose of this study was to elucidate the physical structure of solid dispersions of the antiviral agent UC-781 (N-[4-chloro-3-(3-methyl-2-butenyloxy)phenyl]-2-methyl-3-furancarbothioamide) with polyvinylpyrrolidone (PVP K30). Solid dispersions were prepared by coevaporating UC-781 with PVP K30 from dichloromethane. The physicochemical properties of the dispersions were evaluated in comparison with the physical mixtures by differential scanning calorimetry (DSC), X-ray powder diffraction, and FT-IR spectroscopy. We investigated the single crystal structure of pure UC-781. The data from single crystal analysis showed that UC-781 crystallized with orthorhombic symmetry in the space group Pcab. Its cell parameters were found to be; a = 8.1556(7) A,b = 17.658(2) A and c = 23.609(2) A; the unit cell was made up of eight molecules of UC-781. The molecules formed intermolecular hydrogen bonds between NH and thio groups, and were packed in a herringbone-like structure. The data from X-ray powder diffraction showed that crystalline UC-781 was changed into the amorphous state by co-evaporating it with PVP K30. From differential scanning calorimetry analysis, UC-781 peaks were observed in the DSC curves of all physical mixtures, while no peaks corresponding to the drug could be observed in the solid dispersions with the same drug composition up to the concentration of 50% w/w. The data from FT-IR spectroscopy showed the distortions and disappearance of some bands from the drug, while other bands were too broad or significantly less intense compared with the physical mixtures of the crystalline drug in PVP K30. Furthermore, the results from IR spectroscopy demonstrated that UC-781 interacted with PVP K30 in solid dispersions through intermolecular H-bonding.     

Melt extrusion--an alternative method for enhancing the dissolution rate of 17beta-estradiol hemihydrate.

17Beta-estradiol hemihydrate (17beta-E2) is a poorly water-soluble drug. Physical methods for improving the solubility and dissolution rate, e.g. micronization, have certain inherent disadvantages. The method of choice in this study, melt extrusion, proved to overcome many of the shortcomings of conventional methods. Different compositions of excipients such as PEG 6000, PVP (Kollidon 30) or a vinylpyrrolidone-vinylacetate-copolymer (Kollidon VA64) were used as polymers and Sucroester WE15 or Gelucire 44/14 as additives during melt extrusion. The solid dispersions resulted in a significant increase in dissolution rate when compared to the pure drug or to the physical mixtures. For example, a 30-fold increase in dissolution rate was obtained for a formulation containing 10% 17beta-E2, 50% PVP and 40% Gelucire 44/14. The solid dispersions were then processed into tablets. The improvement in the dissolution behavior was also maintained with the tablets. The USP XXIII requirement for estradiol tablets reaching greater than 75% drug dissolved after 60 min was obtained in this investigation.     

Solid dispersion of carbamazepine in PVP K30 by conventional solvent evaporation and supercritical methods

This study compares the physicochemical properties of carbamazepine (CBZ) solid dispersions prepared by either a conventional solvent evaporation versus a supercritical fluid process. Solid dispersions of carbamazepine in polyvinylpyrrolidone (PVP) K30 with either Gelucire 44/14 or Vitamin E TPGS, NF (d-alpha-tocopheryl polyethylene glycol 1000 succinate) were prepared and characterized by intrinsic dissolution, differential scanning calorimetry, powder X-ray diffraction and Fourier transform infrared spectroscopy. CBZ/PVP K30 and CBZ/PVP K30/TPGS solid dispersions showed increased dissolution rate. The best intrinsic dissolution rate (IDR) was obtained for supercritically processed CBZ/PVP K30 that was four-fold higher than pure CBZ. Thermograms of various solid dispersions did not show the melting peak of CBZ, indicating that CBZ was in amorphous form inside the carrier system. This was further confirmed by X-ray diffraction studies. Infrared spectroscopic studies showed interaction between CBZ and PVP K30 in solid dispersions. The amorphous state of CBZ coupled with presence of interaction between drug and PVP K30 suggests fewer, if any, stability problems. Because the supercritical-based process produced solid dispersions with IDR better than conventional solid dispersions augmented with amphiphilic carriers, stability issues associated with lipid carriers do not apply, which, in turn, implies easier scale up under current Good Manufacturing Practice for this technique.     

Improvement of dissolution rate of tacrolimus by solid dispersion technique

Tacrolimus has a poor solubility in water ranging from 4 to 12 μg mL^?1. The mean bioavailability is ~21 %.The present study was carried out with a view to enhance the dissolution rate of poorly water-soluble drug tacrolimus using Gelucire 44/14^® and Gelucire 50/13^® as carriers and lactose monohydrate as an adsorbent. A combination of melt and adsorption techniques was employed for the preparation of solid dispersions (SD) to make final product easy for handling. Phase solubility study was conducted to evaluate the effect of carriers on aqueous solubility of tacrolimus. In order to elucidate the mechanism of dissolution enhancement, solid state characteristics were investigated using Fourier transform infrared spectroscopy, differential scanning calorimetry and powder X-ray diffraction. Mathematical modeling of in vitro dissolution data indicated the best fitting with Korsemeyer–Peppas model and the drug release kinetics primarily as Fickian/anomalous diffusion. All prepared solid dispersions showed dissolution improvement compared to pure drug, with Gelucire 50/13^® as the superior carrier over Gelucire 44/14^®. Almost similar dissolution profile was obtained as a function of storage time; this can be explained by no change in XRD and DSC pattern after 45 days storage period.     

Development and physicochemical characterization of saquinavir mesylate solid dispersions using Gelucire 44/14 or PEG 4000 as carrier

Solid dispersions of saquinavir mesylate containing either Gelucire^® 44/14 or poly(ethylene glycol) (PEG) 4000, or mixtures of each carrier with Tween 80 or polyvinyl pyrrolidone (PVP) K30 were prepared in order to enhance the drug dissolution rate. These systems were prepared by the melting method and characterized by X-ray powder diffraction, microscopical techniques, and Raman spectroscopy aiming to establish a relationship between physicochemical and dissolution properties under different cooling conditions. Modifications in degree of crystalline order/disorder over time were observed in preparations with both carriers. Overall, formulations cooled and stored at ?20 °C showed less variation in dissolution rates than those at 25 °C. Although Tween 80 has enhanced the known self-emulsifying properties of Gelucire^® 44/14, its combination with PEG 4000 displayed miscibility problems. The addition of PVP K30 was not the most effective approach in enhancing the dissolution in early steps; however, the drug dissolution was stable after 7 days of storage at 25 °C. The combination of PEG 4000 and PVP K30 maintained the dissolution properties for 60 and 90 days at 25 °C/95 % relative humidity and 40 °C/75 % (f ₂ values >50), respectively.     

格列喹酮固体分散体的制备及溶出度测定

目的:制备格列喹酮固体分散体并考察其体外溶出性。方法:以聚乙烯吡咯烷酮K30(PVP)、聚乙二醇6000(PEG)为载体,溶剂熔融法和溶剂法制备格列喹酮固体分散体,并与原料药比较体外溶出度。结果:载体比例越大,药物溶出愈快。载体为PVP所制固体分散体的体外溶出行为总体优于载体为PEG者。格列喹酮-PVP固体分散体(1∶7)10min内体外溶出度达到70%以上,优于格列喹酮原料药。结论:成功制备了格列喹酮固体分散体。     

Role of blooming in determining the storage stability of lipid-based dosage forms

Gelucire 50/13 alone and solid dispersions in this material containing two model drugs (10% w/w caffeine and paracetamol) have been studied with a view to establishing the mechanism underpinning changes in drug-release characteristics as a function of storage time and temperature. The lipid systems were fabricated into tablets and stored for up to 180 days at temperatures of 20 and 37 degrees C. The dispersions were studied using differential scanning calorimetry (DSC), scanning electron microscopy, and dissolution testing. DSC studies indicated that the Gelucire 50/13 exists in two principal melting forms (melting points 38 and 43 degrees C) that undergo transformation to the higher melting form on storage at 37 degrees C. Scanning electron microscopy studies indicated that the systems exhibit "blooming," with crystal formation on the surface being apparent on storage at both temperatures. The dissolution rate increased on storage, with the effect being particularly marked at higher storage temperatures and for the paracetamol systems. However, whereas these changes corresponded well to those seen for the morphology, the correlation between the changes in dissolution and those of the DSC profiles was poor. The study has suggested a novel explanation for the storage instability of Gelucire 50/13 whereby the change in dissolution is associated not with molecular rearrangement as such but with the gross distribution of the constituent components, this in turn altering the physical integrity of the lipid bases.     

Effect of a melt agglomeration process on agglomerates containing solid dispersions

The purpose was to produce solid dispersions of a poorly water-soluble drug, Lu-X, by melt agglomeration in a laboratory scale rotary processor. The effect of binder type and method of manufacturing on the dissolution profile of Lu-X was investigated. Lactose monohydrate and Lu-X were melt agglomerated with Rylo MG12, Gelucire 50/13, PEG 3000, or poloxamer 188. Either a mixture of binder, drug, and excipient was heated to a temperature above the melting point of the binder (melt-in procedure) or a dispersion of drug in molten binder was sprayed on the heated excipient (spray-on procedure). The agglomerates were characterized by DSC, XRPD, SEM, and EDX-SEM. The study showed that the agglomerates containing solid dispersions had improved dissolution rates compared to physical mixtures and pure drug. The melt-in procedure gave a higher dissolution rate than the spray-on procedure with PEG 3000, poloxamer 188, and Gelucire 50/13, whereas the opposite was found with Rylo MG12. This was explained by differences in mechanisms of agglomerate formation and growth, which were dominated by immersion with PEG 3000, poloxamer 188, and Gelucire 50/13, and by distribution and coalescence with Rylo MG12. The spray-on procedure resulted in a higher content of Lu-X in the core of the agglomerates when immersion was the dominating mechanism, and in a higher content in the agglomerate surface when distribution was dominating. The melt-in procedure resulted generally in a homogeneous distribution of Lu-X in the agglomerates. The compounds in the agglomerates were found primarily to be crystalline, and the dissolution profiles were unchanged after 12 weeks storage at 25 degrees C at 50% RH.     

Intestinal absorption characteristics of the low solubility thiocarboxanilide UC-781

The aim of this study was to determine the intestinal absorption characteristics of the antiviral agent UC-781 and to optimize the experimental conditions of the in vitro system for low solubility compounds. The absorption potential of UC-781 was studied with the Caco-2 system and with the rat intestinal perfusion technique. The low solubility of UC-781 required the use of solubility/dissolution rate enhancing agents (e.g. VitE-TPGS, Gelucire 44/14). The creation of sink conditions in the receiver compartment of the Caco-2 system was a prerequisite to reliably study the transport of this poorly soluble compound. After inclusion of VitE-TPGS in the acceptor solution, UC-781 could be characterized as a class II drug of the Biopharmaceutical Classification System (low solubility, high permeation across membranes). A significant concentration-dependent decrease in transport of UC-781 was observed upon increasing the concentration of VitE-TPGS in the apical compartment. This observation contrasts to the absorption enhancing properties of VitE-TPGS, and can probably be attributed to a decrease in the concentration of free UC-781 when using higher concentrations of the solubility/dissolution rate enhancing agents. The use of Gelucire 44/14 as a solubilizing agent resulted in a batch-dependent degradation of UC-781. The inclusion of the solubility/dissolution rate-enhancing agent VitE-TPGS did not result in absorption enhancement in the intestinal perfusion technique.     

Physicochemical characterization of solid dispersions of carbamazepine formulated by supercritical carbon dioxide and conventional solvent evaporation method

Solid dispersions of carbamazepine (CBZ) were formulated by supercritical fluid processing (SCP) and conventional solvent evaporation in polyethylene glycol (PEG) 8000 with either Gelucire 44/14 or vitamin E TPGS NF (d-alpha-tocopheryl PEG 1000 succinate). Formulations were evaluated by dissolution, scanning electron microscopy, powder X-ray diffraction, and differential scanning calorimetry, and excipient cytotoxicity in Caco-2 cells by MTS [3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt] assay. CBZ release was enhanced from supercritical fluid-treated CBZ and the CBZ/PEG 8000 (1:5), CBZ/PEG 8000/TPGS or Gelucire 44/14 (1:4:1) solid dispersions. The radically altered morphologies of SCP samples seen by scanning electron microscopy suggested polymorphic change that was confirmed by the X-ray diffraction and differential scanning calorimetry. Disappearance of the characteristic CBZ melting peak indicated that CBZ was dissolved inside the carrier system. Polymorphic change of CBZ during SCP led to faster dissolution. Therefore, SCP provides advantages over solid dispersions prepared by conventional processes.     

Improvement of solubility and dissolution rate of indomethacin by solid dispersions in Gelucire 50/13 and PEG4000

The aim of this study was to prepare and characterize solid dispersions of water insoluble non-steroidal anti-inflammatory drug, indomethacin (IND), with polyethylene glycol 4000 (PEG4000) and Gelucire 50/13 (Gelu.) for enhancing the dissolution rate of the drug. The solid dispersions (SDs) were prepared by hot melting method at 1:1, 1:2 and 1:4 drug to polymer ratios. Scanning electron microscopy (SEM), X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) were used to examine the physical state of the drug. Furthermore, the solubility and the dissolution rate of the drug in its different systems were explored. The data from the XRD showed that the drug was still detectable in its solid state in all SDs of IND–Gelu. and disappeared in case of higher ratio of IND–PEG4000. DSC thermograms showed the significant change in melting peak of the IND when prepared as SDs suggesting the change in crystallinity of IND. The highest ratio of the polymer (1:4) enhanced the drug solubility about 4-folds or 3.5-folds in case of SDs of IND–PEG or IND–Gelu., respectively. An increased dissolution rate of IND at pH 1.2 and 7.4 was observed when the drug was dispersed in these carriers in form of physical mixtures (PMs) or SDs. IND released faster from the SDs than from the pure crystalline drug or the PMs. The dissolution rate of IND from its PMs or SDs increased with an increasing amount of polymer.     

Improvement of the dissolution kinetics of SR 33557 by means of solid dispersions containing PEG 6000

Solid dispersions of SR 33557 in preparations containing from 30 to 80% w/w polyethylene glycol 6000 (PEG 6000) were prepared by the fusion method. The solubility of the drug substance either alone or in solid dispersions was determined in pH 1.2 and 4.5 media (extraction fluid NFXII, without enzyme). A large increase in the solubility was noted from the 80% w/w PEG preparation. A wettability study performed by measuring the contact angle on tablets of either drug substance or PEG 6000, or solid dispersions, revealed a minimal contact angle for the 80% w/w PEG 6000 solid dispersion (eutectic composition of SR 33557/PEG 6000 phase diagram). Dissolution kinetic analysis performed at pH 1.2 on all solid dispersions, on the physical mixtures containing 70 and 80% w/w PEG 6000, and on SR 33557 alone, showed a maximum release rate (100%) for the solid dispersions containing 70 and 80% w/w PEG 6000. The dissolution rate of the physical mixtures was faster than that of the drug substance alone but remained, however, lower than that of the solid dispersions, at the same composition. It was also observed that the dissolution rate, at pH 1.2 and 4.5, of the 70% w/w PEG 6000 solid dispersion was practically pH independent, which was not the case for the drug substance alone. The latter solid dispersion showed a slowing down of the dissolution kinetics after 3 months storage at 50°C whereas no change in the dissolution rate was observed following storage for 12 months at 25°C.     

替硝唑固体分散体的制备及其体外释放特性研究

目的:利用固体分散技术制备替硝唑固体分散体,增加替硝唑溶解度和溶出速度。方法:以聚乙二醇(PEG)为载体材料,采用溶剂-熔融法制成固体分散体,测定表观溶解度,进行体外溶出试验,并采用差示扫描量热(DSC)法鉴别药物在固体分散体中的存在状态。结果:替硝唑的溶出度和表观溶解度随PEG的比例不同而不同,且溶出度随载体用量增加而增加。固体分散体的DSC曲线中替硝唑药物的特征熔融峰消失。结论:所制得的固体分散体能明显提高替硝唑的溶出度和表观溶解度。     

Characterization and stability of solid dispersions based on PEG/polymer blends

Solid dispersions were prepared by a melting method from the water-insoluble model drugs carbamazepine and nifedipine and polyethylene glycol 1500 (PEG 1500) or 1:1 mixtures of PEG 1500 and the polymers polyvinylpyrrolidone (PVP 30, PVP 12), polyvinylpyrrolidone-co-vinylacetate (PVPVA) and Eudragit EPO (Eudragit) in order to combine advantages of the different carrier polymers (recrystallization inhibition, processability and stability). The solid dispersions were characterized by dissolution, powder X-ray diffractometry and microscopy directly after preparation and after storage for 3 and 6 months at 25 °C/0% relative humidity (RH) or 3 months at 40 °C/75% RH. More than 80% drugs were released from all solid dispersions within 20 min. The dissolution rate of carbamazepine decreased in the order of PEG 1500 > PEG 1500/Eudragit > PEG 1500/PVP 30 > PEG 1500/PVPVA > PEG 1500/PVP 12. The dissolution rank order was not directly correlated to the amorphous/crystalline state of the drugs, but rather to the properties of the PEG 1500/polymer compositions. Nifedipine was released in the order of PEG 1500 > PEG 1500/PVPVA > PEG 1500/PVP 30 > PEG 1500/PVP 12 > PEG 1500/Eudragit. Amorphous nifedipine was present in all PEG 1500/polymer dispersions except in pure PEG 1500 solid dispersion. The significant increase in dissolution rate of PEG 1500 solid dispersions was due to the reduced crystallinity of the drug and the excellent solubilisation properties of PEG 1500. After 6 months storage at 25 °C/0% RH, the solid dispersions released both drugs in the order PEG 1500/PVPVA > PEG 1500/PVP 30 > PEG 1500/PVP 12 > PEG 1500/Eudragit > PEG 1500. The stabilized amorphous state of the drug resulted in stable dissolution profiles of PEG 1500/PVPVA, PEG 1500/PVP 30 and PEG 1500/PVP 12 when compared to the PEG 1500 solid dispersions, which contained a higher amount of crystalline drug. The solid dispersions with PEG 1500/PVPVA or PEG 1500/PVP stored for 3 months at 40 °C/75% RH showed phase separation due to the hygroscopic properties of the polymers. The influence of 10% (w/w) of the solubilisers polyoxyl 40 hydrogenated castor oil (Cremophor), macrogol-15-hydroxystearate (Solutol) and fatty alcohol alkoxylate (Pluronic) on the dissolution rate and the physical state of the drug was significant.     

Enhancement of solubility and permeability of Candesartan cilexetil by using different pharmaceutical interventions

The poor solubility and wettability of Candesartan cilexetil (CAN) leads to poor dissolution and hence, low bioavailability after oral administration. The aim of the present study was to improve the solubility and dissolution rate and hence the permeability of CAN by preparing solid dispersions/inclusion complexes. Solid dispersions were prepared using PEG 6000 [hydrophilic polymer] and Gelucire 50/13 [amphiphilic surfactant] by melt agglomeration (MA) and solvent evaporation (SE) methods in different drug-to-carrier ratios, while inclusion complexes were made with hydroxypropyl-β-cyclodextrin (HP-β-CD) [complexing agent] by grinding and spray drying method. Saturation solubility method was used to evaluate the effect of various carriers on aqueous solubility of CAN. Based on the saturation solubility data, two drug-carrier combinations, PEG 6000 (MA 1:5) and HP-β-CD (1:1 M grinding) were selected as optimized formulations. FTIR, DSC, and XRD studies indicated no interaction of the drug with the carriers and provided valuable insight on the possible reasons for enhanced solubility. Dissolution studies showed an increase in drug dissolution of about 22 fold over the pure drug for PEG 6000 (MA 1:5) and 12 fold for HP-β-CD (1:1 M grinding). Ex-vivo permeability studies revealed that the formulation having the greatest dissolution also had the best absorption through the chick ileum. Capsules containing solid dispersion/ complex exhibited better dissolution profile than the marketed product. Thus, the solid dispersion/inclusion complexation technique can be successfully used for enhancement of solubility and permeability of CAN.     

浙贝提取物固体分散体的制备及溶出特性研究

目的：制备浙贝提取物固体分散体,考察其中贝母素甲及贝母素乙的溶出效果,从而确定制备的最佳方法和最佳比例。方法：选择聚乙二醇6000（PEG6000）与聚乙烯吡咯烷酮（PVP K30）两种载体材料,分别采用熔融法和溶剂法制备浙贝提取物固体分散体;通过比较提取物、固体分散体的溶出性能,确定最佳工艺。结果：使用HPLC-ELSD法测定贝母素甲及贝母素乙的溶出量,结果准确、可靠、稳定。制备成固体分散体能显著提高贝母素甲及贝母素乙的体外溶出速度;PEG6000作为载体的浙贝提取物固体分散体溶出速度快于PVP K30为载体的浙贝提取物固体分散体。结论：以PEG6000为载体,采用熔融法制备的药物/载体比例为1∶6的固体分散体能显著提高浙贝提取物中贝母素甲及贝母素乙的溶出速率。