A novel radiochemical approach to 1‐(2'‐deoxy‐2'‐[18F]fluoro‐β‐d‐arabinofuranosyl)cytosine (18F‐FAC)

¹⁸F‐FAC (1‐(2'‐deoxy‐2'‐[¹⁸F]fluoro‐β‐D‐arabinofuranosyl)‐cytosine) is an important 2'‐fluoro‐nucleoside‐based positron emission tomography (PET) tracer that has been used for in vivo prediction of response to the widely used cancer chemotherapy drug gemcitabine. Previously reported synthetic routes to ¹⁸F‐FAC have relied on early introduction of the ¹⁸F radiolabel prior to attachment to protected cytosine base. Considering the ¹⁸F radiochemical half‐life (110 min) and the technical challenges of multi‐step syntheses on PET radiochemistry modular systems, late‐stage radiofluorination is preferred for reproducible and reliable radiosynthesis with in vivo applications. Herein, we report the first late‐stage radiosynthesis of ¹⁸F‐FAC. Cytidine derivatives with leaving groups at the 2'‐position are particularly prone to undergo anhydro side‐product formation upon heating because of their electron density at the 2‐carbonyl pyrimidone oxygen. Our rationally developed fluorination precursor showed an improved reactivity‐to‐stability ratio at elevated temperatures. ¹⁸F‐FAC was obtained in radiochemical yields of 4.3–5.5% (n = 8, decay‐corrected from end of bombardment), with purities ≥98% and specific activities ≥63 GBq/µmol. The synthesis time was 168 min.     

Modified PEG‐anilinoquinazoline derivatives as potential EGFR PET agents

Inhibition of epidermal growth factor receptor tyrosine kinase (EGFR‐TK) has emerged as a major approach for cancer‐targeted therapy. Consequently, there has been a great interest in the use of labeled EGFR‐TK inhibitors as positron emission tomography (PET) imaging agents. Currently, the developed agents did not yield adequate PET imaging of animal models probably due to poor solubility, rapid washout from blood, and low stability in vivo. In order to overcome these hurdles, new derivatives of previously reported inhibitors (ML04, 2) with decreased log P and increased solubility were designed and synthesized. These compounds (3–5) exhibited high autophosphorylation inhibitory potency with an IC₅₀ of 5–35 nM, decreased log P's (3.1, 3.34, and 3.45, respectively), and significantly increased solubility (630, 300, and 120 µg/mL, respectively) relative to the previously reported parent compound 2 (log P=3.7, solubility=3.5 µg/mL). The labeling of compound 5 with [¹⁸F] and compounds 3 and 4 with [¹¹C] and [¹²⁴I], respectively, involved a one‐step radiosynthesis. Compounds 3–5 were obtained with a total decay‐corrected radiochemical yields of 13, 31, and 5%, respectively, and were found to be stable in blood. The positive outcome achieved with compounds 3–5 merits further in vivo evaluation as PET bioprobes. Copyright © 2008 John Wiley & Sons, Ltd.     

Novel synthesis of [1‐11C]γ‐vinyl‐γ‐aminobutyric acid ([1–11C]GVG) for pharmacokinetic studies of addiction treatment

γ‐Vinyl‐γ‐aminobutyric acid (GVG, Vigabatrin^®), a suicide inhibitor of GABA‐transaminase (GABA‐T), has been suggested as a new drug for the treatment of substance abuse. In order to better understand its pharmacokinetics and potential side effects, we have developed a radiosynthesis of carbon‐11 (t_1/2=20 min) labeled GVG for positron emission tomographic (PET) studies. We report here a novel synthetic strategy to prepare the precursor and to efficiently label GVG with C‐11. 5‐Bromo‐3‐(carbobenzyloxy)amino‐1‐pentene was synthesized in five steps from homoserine lactone, including reduction and methylenation. This was used in a one‐pot, two‐step radiosynthesis. Displacement of bromide with no‐carrier‐added [¹¹C]cyanide followed by acid hydrolysis afforded [1‐¹¹C]GVG with decay corrected radiochemical yields of 27±9% (n=6, not optimized) with respect to [¹¹C]cyanide in a synthesis time of 45 min. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of [18F] 4‐amino‐N‐(3‐chloro‐4‐fluorophenyl)‐N′‐hydroxy‐1,2,5‐oxadiazole‐3‐carboximidamide (IDO5L): a novel potential PET probe for imaging of IDO1 expression

To synthesize ¹⁸F‐labeled positron emission tomography (PET) ligands, reliable labeling techniques inserting ¹⁸F into a target molecule are necessary. The ¹⁸F‐fluorobenzene moiety has been widely utilized in the synthesis of ¹⁸F‐labeled compounds. The present study utilized [¹⁸F]‐labeled aniline as intermediate in [¹⁸F]‐radiolabeling chemistry for the facile radiosynthesis of 4‐amino‐N‐(3‐chloro‐4‐fluorophenyl)‐N′‐hydroxy‐1,2,5‐oxadiazole‐3‐carboximidamide ([¹⁸F]IDO5L) as indoleamine 2,3‐dioxygenase 1 (IDO1) targeted tracer. IDO5L is a highly potent inhibitor of IDO1 with low nanomolar IC₅₀. [¹⁸F]IDO5L was synthesized via coupling [¹⁸F]3‐chloro‐4‐fluoroaniline with carboximidamidoyl chloride as a potential PET probe for imaging IDO1 expression. Under the optimized labeling conditions, chemically and radiochemically pure (>98%) [¹⁸F]IDO5L was obtained with specific radioactivity ranging from 11 to 15 GBq/µmol at the end of synthesis within ~90 min, and the decay‐corrected radiochemical yield was 18.2 ± 2.1% (n = 4).     

One pot radiofluorination of a new potential PSMA ligand [Al18F]NOTA‐DUPA‐Pep

Up to now, many radiolabeled ligands targeting prostate‐specific membrane antigen (PSMA) have been synthesized. To carry out radiofluorinations, there have been several approaches mainly involving two steps of radiosynthesis. However, in case of labelings with high activities, one radiosynthetic step (‘one pot synthesis’) is highly desirable. As an alternative, radiofluorinations of peptides coupled to the NOTA complex via Al¹⁸F appear to be very promising, both in terms of feasible labelling procedure and stability in vivo. Therefore, in the present study, we synthesized a new PSMA‐ligand, that is, NOTA‐DUPA‐Pep, labeled with Al¹⁸F and examined the reaction kinetics in dependence on temperature, time, concentration of precursor, and AlCl₃ solution. Highest radiochemical yields of 83 ± 1.1% were obtained at 105 °C after 15 min of reaction time. At the end of synthesis, [Al¹⁸F]NOTA‐DUPA‐Pep was prepared with a radiochemical purity of ≥98% with an overall yield of 79 ± 0.7% (n = 3) (decay uncorrected) within 55 min. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of a new fluorine‐18 glycosylated ‘click’ cyanoquinoline for the imaging of epidermal growth factor receptor

This study reports the radiosynthesis of a new fluorine‐18 glycosylated ‘click’ cyanoquinoline [¹⁸F]5 for positron emission tomography imaging of epidermal growth factor receptor (EGFR). The tracer was obtained in 47.7 ± 7.5% (n = 3) decay‐corrected radiochemical yield from 2‐[¹⁸F]fluoro‐2‐deoxy‐β‐d ‐glucopyranosyl azide, and the overall nondecay‐corrected radiochemical yield from aqueous fluoride was 8.6 ± 2.3% (n = 3). An in vitro preliminary cellular uptake study showed selectivity of the tracer for EGFR‐positive A431 cell lines versus EGFR‐negative MCF‐7 cell lines. [¹⁸F]5 tracer uptake in A431 cells was significantly reduced by addition of the cold isotope analogue compound 5.     

Radiosynthesis and preliminary biodistribution in mice of 6‐deoxy‐6‐[131I]iodo‐L‐ascorbic acid

An ascorbate analog labeled with iodine‐131, 6‐deoxy‐ 6‐[¹³¹I]iodo‐L ‐ascorbic acid was prepared for evaluation as an in vivo tracer of L ‐ascorbic acid. The no‐carrier‐added radiosynthesis was conducted by nucleophilic bromine–iodine exchange between the brominated precursor and sodium [¹³¹I]iodide in 2‐pentanone at 130–140°C. HPLC purification using a reverse‐phase column gave 6‐deoxy‐6‐[¹³¹I]iodo‐L ‐ascorbic acid in radiochemical yield of 36–60% with high radiochemical purity and satisfactory‐specific radioactivity in a total preparation time of 90 min. Biodistribution studies in fibrosarcoma‐bearing mice showed a high uptake in the adrenal glands, accompanied by low activity of tumor accumulation, accumulation properties similar to previous results obtained with ¹⁴C‐labeled ascorbic acid and 6‐deoxy‐6‐[¹⁸F]fluoro‐L ‐ascorbic acid, in spite of high level of deiodination. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of [18F]3‐[1‐(3‐fluoropropyl)‐(S)‐pyrrolidin‐2‐ylmethoxy]pyridine ([18F]NicFP): a potential α4β2 nicotinic acetylcholine receptor radioligand for PET

Nicotinic acetylcholine receptors are widely distributed throughout the human brain and are believed to play a role in several neurological and psychiatric disorders. In order to identify an effective PET radioligand for in vivo assessment of the α4β2 subtype of nicotinic receptor, we synthesized [¹⁸F]3‐[1‐(3‐fluoropropyl)‐(S)‐pyrrolidin‐2‐ylmethoxy]pyridine (NicFP). The in vitro K_D of NicFP was determined to be 1.1 nM, and the log P value obtained by HPLC analysis of the unlabelled standard was found to be 2.2. The radiosynthesis of [¹⁸F]NicFP was carried out by a nucleophilic substitution reaction of anhydrous [¹⁸F]fluoride and the corresponding mesylate precursor. After purification by HPLC, the radiochemical yield was determined to be 11.3±2.1% and the specific activity was 0.47±0.18 Ci/μmol (EOS, n = 3). The time of synthesis and purification was 99±2 min. The final product was prepared as a sterile saline solution suitable for in vivo use. Copyright © 2003 John Wiley & Sons, Ltd.     

(R)‐N‐Methyl‐3‐(3′‐[18F]fluoropropyl)phenoxy)‐3‐phenylpropanamine (18F‐MFP3) as a potential PET imaging agent for norepinephrine transporter

A decline of norepinephrine transporter (NET) level is associated with several psychiatric and neurological disorders. Therefore positron emission tomography (PET) imaging agents are greatly desired to study the NET pathway. We have developed a C‐fluoropropyl analog of nisoxetine: (R)‐N‐methyl‐3‐(3′‐[¹⁸F]fluoropropyl)phenoxy)‐3‐phenylpropanamine (¹⁸F‐MFP3) as a new potential PET radiotracer for NET with the advantage of the longer half‐life of fluorine‐18 (110 min compared with carbon‐11 (20 min). Synthesis of (R)‐N‐methyl‐3‐(3′‐fluoropropyl)phenoxy)‐3‐phenylpropanamine (MFP3) was achieved in five steps starting from (S)‐N‐methyl‐3‐ol‐3‐phenylpropanamine in approx. 3–5% overall yields. In vitro binding affinity of nisoxetine and MFP3 in rat brain homogenates labeled with ³H‐nisoxetine gave Ki values of 8.02 nM and 23 nM, respectively. For radiosynthesis of ¹⁸F‐MFP3, fluorine‐18 was incorporated into a tosylate precursor, followed by the deprotection of the N‐BOC‐protected amine group with a 15% decay corrected yield in 2.5 h. Reverse‐phase chromatographic purification provided ¹⁸F‐MFP3 in specific activities of >2000 Ci/mmol. Fluorine‐18 labeled ¹⁸F‐MFP3 has been produced in modest radiochemical yields and in high specific activities. Evaluation of ¹⁸F‐MFP3 in animal imaging studies is in progress in order to validate this new fluorine‐18 radiotracer for PET imaging of NET. Copyright © 2010 John Wiley & Sons, Ltd.     

Efficient gallium‐68 radiolabeling reaction of DOTA derivatives using a resonant‐type microwave reactor

Gallium‐68 (⁶⁸Ga, t_1/2 = 68 min) can be easily obtained from a ⁶⁸Ge/⁶⁸Ga generator, and several such systems are commercially available. The use of positron emission tomography (PET) imaging using ⁶⁸Ga‐labeled radiopharmaceuticals is expected to increase in both preclinical and clinical settings. However, the chelation between a ⁶⁸Ga cation and the bifunctional macrocyclic chelates that are used for labeling bioactive substances, such as 1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid (DOTA), requires a relatively long reaction time and high temperature to achieve a high radiochemical yield. Previously, we reported on a novel resonant‐type microwave reactor that can be used for radiosynthesis and the usefulness of this reactor in the PET radiosynthesis of ¹⁸F. In the present study, the usefulness of this resonant‐type microwave reactor was evaluated for the radiolabeling of model macrocyclic chelates with ⁶⁸Ga. As a result, microwave heating of resonant‐type microwave reactor notably improved the rate of the ⁶⁸Ga labeling chelate reaction in a short time period of 2 minutes, compared with the use of a conventional heating method. Additionally, it was found that the use of this reactor made it possible to decrease the amount of precursors required in the reaction and to improve the molar activity of the labeled compounds.     

An azeotropic drying‐free approach for copper‐mediated radiofluorination without addition of base

Copper‐mediated radiofluorination provides a quick and versatile approach for ¹⁸F‐labeling of arenes and heteroarenes. However, this method is known to be base sensitive, which has been a barrier for preparative scale radiosynthesis. In this report, we provide an approach for copper‐mediated radiofluorination without azeotropic drying or adding a base. [¹⁸F]Fluoride trapped on a PS‐HCO₃ Sep‐Pak was quantitatively eluted with a solution of 4‐dimethylaminopyridinium trifluoromethanesulfonate (DMAP·OTf) in anhydrous N,N‐dimethylformamide (DMF). The eluted solution was directly used for copper‐mediated radiofluorination. Twelve boronic ester substrates were tested, yielding fluorinated products in 27% to 83% radiochemical yield based on HPLC analysis. This approach was successfully applied to the radiosynthesis of [¹⁸F]flumazenil, a well‐known positron emission tomography (PET) tracer for imaging central benzodiazepine receptors, with a radiochemical yield of 47%. This highly efficient protocol significantly augments the powerful copper‐mediated radiofluorination approach.     

Synthesis and evaluation of novel 18F‐labeled quinazoline derivatives with low lipophilicity for tumor PET imaging

Four novel ¹⁸F‐labeled quinazoline derivatives with low lipophilicity, [¹⁸F]4‐(2‐fluoroethoxy)‐6,7‐dimethoxyquinazoline ( [ ¹⁸ F]I ), [¹⁸F]4‐(3‐((4‐(2‐fluoroethoxy)‐7‐methoxyquinazolin‐6‐yl)oxy)propyl)morpholine ( [ ¹⁸ F]II ), [¹⁸F]4‐(2‐fluoroethoxy)‐7‐methoxy‐6‐(2‐methoxyethoxy)quinazoline ( [ ¹⁸ F]III ), and [¹⁸F]4‐(2‐fluoroethoxy)‐6,7‐bis(2‐methoxyethoxy)quinazoline ( [ ¹⁸ F]IV ), were synthesized via a 2‐step radiosynthesis procedure with an overall radiochemical yield of 10% to 38% (without decay correction) and radiochemical purities of >98%. The lipophilicity and stability of labeled compounds were tested in vitro. The log P values of the 4 radiotracers ranged from 0.52 to 1.07. We then performed ELISA to measure their affinities to EGFR‐TK; ELISA assay results indicated that each inhibitor was specifically bounded to EGFR‐TK in a dose‐dependent manner. The EGFR‐TK autophosphorylation IC₅₀ values of [ ¹⁸ F]I , [ ¹⁸ F]II , [ ¹⁸ F]III , and [ ¹⁸ F]IV were 7.732, 0.4698, 0.1174, and 0.1176 μM, respectively. All labeled compounds were evaluated via cellular uptake and blocking studies in HepG2 cell lines in vitro. Cellular uptake and blocking experiment results indicated that [ ¹⁸ F]I and [ ¹⁸ F]III had excellent cellular uptake at 120‐minute postinjection in HepG2 carcinoma cells (51.80 ± 3.42%ID/mg protein and 27.31 ± 1.94%ID/mg protein, respectively). Additionally, biodistribution experiments in S180 tumor‐bearing mice in vivo indicated that [ ¹⁸ F]I had a very fast clearance in blood and a relatively high uptake ratio of tumor to blood (4.76) and tumor to muscle (1.82) at 60‐minute postinjection. [ ¹⁸ F]III had a quick clearance in plasma, and its highest uptake ratio of tumor to muscle was 2.55 at 15‐minute postinjection. These experimental results and experiences were valuable for the further exploration of novel radiotracers of quinazoline derivatives.     

Synthesis of an 18F‐labeled cyclin‐dependent kinase‐2 inhibitor

The radiosynthesis of N‐(5‐(((5‐(tert‐butyl)oxazol‐2‐yl)methyl)thio)thiazol‐2‐yl)‐4‐[¹⁸F]fluoro‐benzamide [¹⁸F]2 as a potential radiotracer for molecular imaging of cyclin‐dependent kinase‐2 (CDK‐2) expression in vivo by positron emission tomography is described. Two different synthesis routes were envisaged. The first approach followed direct radiofluorination of respective nitro‐ and trimethylammonium substituted benzamides as labeling precursors with no‐carrier‐added (n.c.a.) [¹⁸F]fluoride. A second synthesis route was based on the acylation reaction of 2‐aminothiazole derivative with labeling agent [¹⁸F]SFB. Direct radiofluorination afforded ¹⁸ F‐labeled CDK‐2 inhibitor in very low yields of 1%–3%, whereas acylation reaction with [¹⁸F]SFB gave ¹⁸ F‐labeled CDK‐2 inhibitor [¹⁸ F]2 in high yields of up to 85% based upon [¹⁸ F]SFB during the optimization experiments. Large scale preparation afforded radiotracer [¹⁸ F]2 in isolated radiochemical yields of 37%–44% (n = 3, decay‐corrected) after HPLC purification within 75 min based upon [¹⁸ F]SFB. This corresponds to a decay‐corrected radiochemical yield of 13%–16% based upon [¹⁸F]fluoride. The radiochemical purity exceeded 95% and the specific activity was determined to be 20 GBq/µmol. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of 3‐[[4‐(4‐[18F] fluorophenyl)piperazin‐1‐yl]methyl]‐1H‐pyrrolo[2,3‐b]pyridine

3‐[[4hyphen;(4‐[¹⁸F]fluorophenyl)piperazin‐1‐yl] methyl] ‐1H‐pyrrolo[2,3‐b]pyridine, acandidate to image dopamine D₄ receptors, was synthesised via electrophilic fluorination of a trimethylstannyl precursor with high specific radioactivity [¹⁸F]F₂. The precursor was obtained by a facile four‐step synthetic approach; the trimethylstannyl leaving group was introduced by displacement of iodine utilising palladium catalysis and hexamethyldistannane in an inert solvent. The total radiosynthesis time was 50 min, including purification and formulation for injection. Decay corrected radiochemical yield was <1% as calculated from the amount of [¹⁸F]F^? produced. Specific radioactivity at the end of synthesis was 12.8–16.4 GBq/μmol. Radiochemical purity was 88–92%. Ex vivo studies in rats showed homogeneous distribution of radioactivity within rat brain. Copyright © 2002 John Wiley & Sons, Ltd.     

Radiosynthesis of novel pitavastatin derivative ([18F]PTV‐F1) as a tracer for hepatic OATP using a one‐pot synthetic procedure

Pitavastatin is an antihyperlipidemic agent, a potent inhibitor of 3‐hydroxymethyl‐glutaryl‐CoA reductase, which is selectively taken up into the liver mainly via hepatic organic anion transporting polypeptide 1B1 (OATP1B1). OATP1B1 can accept a variety of organic anions, and previous reports indicated that it is responsible for the hepatic clearance of several clinically used anionic drugs. Therefore, the pharmacokinetics and the hepatic distribution of pitavastatin provide an insight into the function of OATP1B1 in humans. For the development of the in vivo evaluation of OATP1B1 function by positron emission tomography imaging, we designed a novel [¹⁸F]pitavastatin derivative ([¹⁸F]PTV‐F1), in which a [¹⁸F]fluoroethoxy group is substituted for the [¹⁸F]fluoro group of [¹⁸F]pitavastatin, with the aim of convenient radiolabeling protocol and high radiochemical yield. In vitro studies suggested that transport activities of PTV‐F1 mediated by OATP1B1 and OATP1B3 were very similar to those of pitavastatin and PTV‐F1 was metabolically stable in human liver microsomes. In the radiosynthesis of [¹⁸F]PTV‐F1 from the tosylate precursor, nucleophilic fluorination and subsequent deprotection were performed using a one‐pot procedure. [¹⁸F]PTV‐F1 was obtained with a radiochemical yield of 45% ± 3% (n = 3), and the operating time for the radiosynthesis of [¹⁸F]PTV‐F1 is very short (30 minutes) compared with [¹⁸F]pitavastatin.     

Synthesis of (4‐[18F]fluorophenyl)triphenylphosphonium as a potential imaging agent for mitochondrial dysfunction

Tetraphenylphosphonium (TPP) cation is able to function as a molecular probe for monitoring mitochondrial disease. The F‐18 labeled TPP, (4‐[¹⁸F]fluorophenyl) triphenylphosphonium (¹⁸FTPP), was therefore developed as a PET radioligand for in vivo molecular imaging of mitochondrial dysfunction. ¹⁸FTPP was synthesized via direct nucleophilic substitution of no‐carrier‐added [¹⁸F]fluoride with the precursor 4‐nitrophenyltriphenylphosphonium. After purification by HPLC, the average radiochemical yield was determined to be 10–15% and the specific activity was >500 Ci/mmol at the end of synthesis. The total synthesis time was within 60 min, and the radiochemical purity of the ¹⁸FTPP was above 95%. Copyright © 2005 John Wiley & Sons, Ltd.     

Radiosynthesis of the HIV integrase inhibitor [18F]MK‐0518 (Isentress)

The human immunodeficiency virus integrase inhibitor, [¹⁸F]MK‐0518, was prepared via a three‐step, one‐pot radiosynthesis. [¹⁸F]4‐Fluorobenzylamine was produced from the fluorination of 4‐cyano‐N,N,N‐trimethylammonium triflate with [¹⁸F]fluoride and reduction with borane methylsulfide complex in 50–68% radiochemical yield. The final step, the coupling of [¹⁸F]4‐fluorobenzylamine with an ester coupling partner, achieved an overall uncorrected radiochemical yield after HPLC purification of ～2%, based on the starting [¹⁸F]fluoride. In a typical run, the total synthesis time was about 90 min and gave 0.37–1.74 GBq (10–47 mCi) of [¹⁸F]MK‐0518. The radiochemical purity of [¹⁸F]MK‐0518 was>98% and the specific activity was 243–1275 Ci/mmol (EOS, n=4). A convenient three‐step, one‐pot radiosynthesis of [¹⁸F]MK‐0518 via [¹⁸F]4‐fluorobenzylamine has been developed, giving sufficient quantities of [¹⁸F]MK‐0518 for animal positron emission tomography studies. Copyright © 2010 John Wiley & Sons, Ltd.     

Initial experience in synthesis of (2S,4R)‐4‐[18F]fluoroglutamine for clinical application

We report initial experience in synthesis of (2S,4R)‐4‐[¹⁸F]fluoroglutamine, [¹⁸F]FGln, which has been used as a tool for monitoring glutamine metabolism in cancer patients. [¹⁸F]FGln was prepared by a fully automated PET‐MF‐2V‐IT‐I synthesizer under GMP‐compliant conditions for routine clinical studies. The total radiosynthesis time was about 65 minutes, the decay‐corrected radiochemical yield was 18.0 ± 4.2% (n = 59; failure n = 15), and the radiochemical purity was greater than 90%. In some situations, the yields were low (less than 5%), and the most likely cause of this problem is the initial fluorination step; the fluoride ion might not have been fully activated. In other occasions, low final radiochemical purity was often associated with the failure of the second step—removal of protection groups by anhydrous trifluoroacetic acid. A trace amount of water led to production of undesired 4‐[¹⁸F]fluoroglutamic acid. Knowledge learned from the successes and failures of synthesis may be helpful to identify critical steps and pitfalls for preparation of this clinically useful metabolic probe, [¹⁸F]FGln, for imaging glutamine utilization in tumor of cancer patients.     

Improved synthesis of 4‐[18F]fluoro‐m‐hydroxyphenethylguanidine using an iodonium ylide precursor

Fluorine‐18 labeled hydroxyphenethylguanidines were recently developed in our laboratory as a new class of PET radiopharmaceuticals for quantifying regional cardiac sympathetic nerve density in heart disease patients. Studies of 4‐[¹⁸F]fluoro‐m‐hydroxyphenethylguanidine ([¹⁸F]4F‐MHPG) and 3‐[¹⁸F]fluoro‐p‐hydroxyphenethylguanidine ([¹⁸F]3F‐PHPG) in human subjects have shown that these radiotracers can be used to generate high‐resolution maps of regional sympathetic nerve density using the Patlak graphical method. Previously, these compounds were synthesized using iodonium salt precursors, which provided sufficient radiochemical yields for on‐site clinical PET studies. However, we were interested in exploring new methods that could offer significantly higher radiochemical yields. Spirocyclic iodonium ylide precursors have recently been established as an attractive new approach to radiofluorination of electron‐rich aromatic compounds, offering several advantages over iodonium salt precursors. The goal of this study was to prepare a spirocyclic iodonium ylide precursor for synthesizing [¹⁸F]4F‐MHPG and evaluate its efficacy in production of this radiopharmaceutical. Under optimized automated reaction conditions, the iodonium ylide precursor provided radiochemical yields averaging 7.8% ± 1.4% (n = 8, EOS, not decay corrected), around threefold higher than those achieved previously using an iodonium salt precursor. With further optimization and scale‐up, this approach could potentially support commercial distribution of [¹⁸F]4F‐MHPG to PET centers without on‐site radiochemistry facilities.     

Synthesis of empagliflozin,a novel and selective sodium‐glucose co‐transporter‐2 inhibitor,labeled with carbon‐14 and carbon‐13

Empagliflozin, (2S,3R,4R,5S,6R)‐2‐[4‐chloro‐3‐[[4‐[(3S)‐oxolan‐3‐yl]oxyphenyl]methyl]phenyl]‐6‐(hydroxymethyl)oxane‐3,4,5‐triol was recently approved by the FDA for the treatment of chronic type 2 diabetes mellitus. Herein, we report the synthesis of carbon‐13 and carbon‐14 labeled empagliflozin. Carbon‐13 labeled empagliflozin was prepared in five steps and in 34% overall chemical yield starting from the commercially available α‐D‐glucose‐[¹³C₆]. For the radiosynthesis, the carbon‐14 atom was introduced in three different positions of the molecule. In the first synthesis, Carbon‐14 D‐(+)‐gluconic acid δ‐lactone was used to prepare specifically labeled empagliflozin in carbon‐1 of the sugar moiety in four steps and in 19% overall radiochemical yield. Carbon‐14 labeled empagliflozin with the radioactive atom in the benzylic position was obtained in eight steps and in 7% overall radiochemical yield. In the last synthesis carbon‐14 uniformly labeled phenol was used to give [¹⁴C]empagliflozin in eight steps and in 18% overall radiochemical yield. In all these radiosyntheses, the specific activities of the final compounds were higher than 53 mCi/mmol, and the radiochemical purities were above 98.5%.