Mehrsegmentale interkorporelle Fusion vs. Wirbelkörperersatz

Background

The surgical techniques of interbody fusion and vertebral body replacement represent two concurrent options for multilevel anterior decompression and arthrodesis of the cervical spine.

Patients and methods

In a retrospective study the data from 61 patients who received either interbody fusion (n?=?38) as anterior cervical discectomy and fusion (ACDF) or vertebral body replacement (n?=?23) (as anterior cervical corpectomy and fusion (ACCF) because of degenerative disc disease of the cervical spine were collected.

Results

The clinical outcome was better at all time points in the patient group with ACDF than in those with ACCF but with no statistically significant differences. The operated segments showed a more rapid fusion progress after ACDF during the time course in comparison to ACCF; however, there was no relationship between the grade of fusion and the clinical result.

Conclusion

In direct comparison multisegmental interbody fusion showed better results with respect to the clinical outcome and bony fusion with a lower rate of complications than vertebral body replacement. However, the differences did not reach statistical significance.     

One stage anterior-posterior approach for traumatic atlantoaxial instability combined with subaxial cervical spinal cord injury

Objectives

To explore the clinical features of traumatic atlantoaxial instability combined with subaxial cervical spinal cord injury (CSCI), and to analyze the feasibility, indication and therapeutic effects of anterior-posterior approach in such cases.

Methods

From March 2004 to September 2009, 16 cases with this trauma were admitted and surgically treated in our department. Before surgery, skull traction was performed. Posterior atlantoaxial pedicle screw internal fixation and bone graft fusion were conducted to manage traumatic atlantoaxial instability. As for subaxial CSCI, anterior cervical corpectomy or discectomy decompression, bone grafting and internal fixation with steel plates were applied.

Results

All operations were successful. The average operation time was 3 hours and operative blood loss 400 ml. Satisfactory reduction of both the upper and lower cervical spine and complete decompression were achieved. All patients were followed up for 12 to 36 months. Their clinical symptoms were improved by various levels. The Japanese Orthopaedic Association (JOA) scores ranged from 10 to 16 one year postoperatively, 13.95±2.06 on average (improvement rate=70.10%). X-rays, spiral CT and MRI confirmed normal cervical alignments, complete decompression and fine implants' position. There was no breakage or loosening of screws, nor exodus of titanium mesh or implanted bone blocks. The grafted bone achieved fusion 3-6 months postoperatively and no atlantoaxial instability was observed.

Conclusions

Traumatic atlantoaxial instability may combine with subaxial CSCI, misdiagnosis of which should be especially alerted and avoided. For severe cases, one stage anterior-posterior approach to decompress the upper and lower cervical spine, together with reposition, bone grafting and fusion, as well as internal fixation can immediately restore the normal alignments and stability of the cervical spine and effectively improve the spinal nervous function, thus being an ideal approach.     

Expandable titanium cages for anterior column cervical reconstruction and their effect on sagittal profile: a review of 48 cases

Background

Expandable cervical cages have been utilised successfully to reconstruct the cervical spine for various conditions. However, to date there are only limited data on their influence on cervical sagittal profile. In this retrospective study, we present our experience with performing anterior cervical corpectomy in one or two levels using expandable titanium cages in order to achieve stable reconstruction and restoration of cervical lordosis.

Methods

A case series of data from 48 consecutive patients (20 men, 28 women; mean age 61 years) operated upon in a 5-year-period is retrospectively reviewed. Standard anterior single- or two-level cervical corpectomy, fusion and spinal reconstruction were performed, including placement of an expandable titanium cage and an anterior cervical plate. The mean follow-up was 23 months (range, 8–42 months). Outcome was measured by clinical examinations and visual analogue scale (VAS) scale; myelopathy was classified according the Nurick grading system. Radiographic analysis comprised several parameters, including segmental Cobb angle, cervical lordosis, subsidence ratio and sagittal cage angle. Computed tomography was done 1 and 2 years after surgery; cervical spine radiographs were obtained 3, 6, 12 and 24 months after surgery.

Results

In 38 patients (79 %) osseous fusion or stability of construct could be demonstrated in the 2-year follow up examination. The mean restoration of segmental Cobb angle as well as cervical lordosis amounted to 7.6° and 5.4° respectively, both being statistically significant. Furthermore, a profound correction (10° or more) of the sagittal cervical curve was shown in 15 patients.

Conclusion

Regarding the restoration of the physiological sagittal cervical profile, expandable cervical cages seem to be efficient and easy to use for cervical spine reconstruction after anterior corpectomy. Donor-site-related complications are avoided, fast and strong reconstruction of the anterior column is provided, resulting in satisfactory fusion rates after 2 years.     

Clinical and radiographic outcomes of dynamic cervical implant replacement for treatment of single-level degenerative cervical disc disease: a 24-month follow-up

Purpose

To determine the role of dynamic cervical implant (DCI) replacement for single-level degenerative cervical disc disease in Chinese patients.

Methods

Thirty patients with single-level degenerative cervical disc disease were prospectively enrolled between April 2010 and August 2010 (12 women, 18 men; mean age 56.5 years). All patients underwent anterior cervical decompression, DCI replacement, clinical and radiological assessments preoperatively and at 1, 6, 12, and 24 months postoperatively, and Japanese Orthopaedic Association (JOA), Visual Analogue Scale (VAS), Neck Disability Index (NDI), and Short Form 36 (SF-36) scores. Lateral neutral radiographs provided the intervertebral space height. Lateral dynamic radiographs were taken to measure the range of motion (ROM) of the cervical spine and functional spinal unit (FSU) of the treated segment. We compared the amount of motion of the adjacent vertebral endplate and the intrinsic motion of the implant and calculated a correlation analysis.

Results

DCI showed good clinical and radiographic outcomes. At the final follow-up, JOA, VAS, NDI, and SF-36 average scores improved significantly. The intervertebral space height increased slightly after operation and was maintained during follow up. The ROM of the cervical spine and FSU decreased at early follow-up, but recovered to the preoperative level within 1–2 years. There was a high index of linear correlation between the motion of the adjacent vertebral endplate and the intrinsic motion of the implant.

Conclusions

DCI provided elastic dynamic stability for the targeted segment, and restored and sustained intervertebral space height and ROM of the cervical spine.     

Design and preliminary biomechanical analysis of artificial cervical joint complex

Objective

To design an artificial cervical joint complex (ACJC) prosthesis for non-fusion reconstruction after cervical subtotal corpectomy, and to evaluate the biomechanical stability, preservation of segment movements and influence on adjacent inter-vertebral movements of this prosthesis.

Methods

The prosthesis was composed of three parts: the upper/lower joint head and the middle artificial vertebrae made of Cobalt–Chromium–Molybdenum (Co–Cr–Mo) alloy and polyethylene with a ball-and-socket joint design resembling the multi-axial movement in normal inter-vertebral spaces. Biomechanical tests of intact spine (control), Orion locking plate system and ACJC prosthesis were performed on formalin-fixed cervical spine specimens from 21 healthy cadavers to compare stability, range of motion (ROM) of the surgical segment and ROM of adjacent inter-vertebral spaces.

Results

As for stability of the whole lower cervical spine, there was no significant difference of flexion, extension, lateral bending and torsion between intact spine group and ACJC prosthesis group. As for segment movements, difference in flexion, lateral bending or torsion between ACJC prosthesis group and control group was not statistically significant, while ACJC prosthesis group showed an increase in extension (P < 0.05) compared to that of the control group. In addition, ACJC prosthesis group demonstrated better flexion, extension and lateral bending compared to those of Orion plating system group (P < 0.05). Difference in adjacent inter-vertebral ROM of the ACJC prosthesis group was not statistically significant compared to that of the control group.

Conclusion

After cervical subtotal corpectomy, reconstruction with ACJC prosthesis not only obtained instant stability, but also reserved segment motions effectively, without abnormal gain of mobility at adjacent inter-vertebral spaces.     

Kinematic study of the relation between the instantaneous center of rotation and degenerative changes in the cervical intervertebral disc

Purpose

We located the instantaneous center of rotation (ICR) for the cervical spine at various ages and investigated age-related changes. We evaluated the impact of cervical disc degeneration on the ICR using a scoring system based on plain radiographs.

Methods

Flexion, extension, and neutral lateral radiographs were obtained from 680 asymptomatic subjects (363 men, 317 women; ages 20–79 years) divided into six 10-year-age groups. The ICRs from C3/C4 to C6/C7 were determined from the radiographs using MIMICS software. A scoring system determined from lateral radiographs quantitatively assessed degeneration of cervical intervertebral discs. ICRs were compared among groups to analyze age-related changes and the relation between degenerative changes and ICR location.

Results

In asymptomatic subjects, the ICR was located approximately at the superior half of the lower vertebral body height and the posterior half of its width. The ICR at the C5/C6 level was located more anterior and higher in patients >50 years than in younger subgroups (P < 0.05). Degenerative changes produced more anterosuperior translation of the ICR, which was significantly correlated with height loss (P < 0.05). In moderately or severely degenerated segments, the ICR location change reached statistical significance (P < 0.05).

Conclusions

Baseline data for Chinese cervical spine ICRs were established for the third through eighth decade of life, including age-related changes and the kinematic effects of degenerative change on the ICR in the functional spine unit. These findings should be considered in clinical practice and when designing disc prostheses.     

Anterior surgical options for the treatment of cervical spondylotic myelopathy in a long-term follow-up study

Objective

To provide a basis for the choice of anterior surgery procedures in the treatment of cervical spondylotic myelopathy (CSM) through long-term follow-up.

Methods

A consecutive series of 89 patients with CSM having complete follow-up data were analyzed retrospectively. All patients were treated with anterior cervical discectomy and fusion (ACDF), and anterior cervical corpectomy and fusion (ACCF) from July 2000 to June 2007. The lesions were located in one segment (n = 25), two segments (n = 56), and three segments (n = 8). Preoperative and postoperative, the C2–C7 angle, cervical intervertebral height, radiographic fusion status, result of the adjacent segment degeneration, the Japanese Orthopaedic Association (JOA), and the Short Form 36-item (SF36) questionnaire scores were used to evaluate the efficacy of the surgery.

Results

According to the different compression conditions of the 89 cases, different anterior operation procedures were chosen and satisfactory results were achieved, indicating that direct anterior decompressions were thorough and effective. The follow-up period was 60–108 months, and the average was 79.6 months. The 5-year average symptom improvement rate, effectiveness rate, and fineness rate were 78.36 %, 100 % (89/89), and 86.52 % (77/89), respectively.

Conclusions

For CSM with compression coming from the front side, proper anterior decompression based on the specific conditions could directly eliminate the compression. Through long-term follow-up, the effect of decompression became observable.     

Reduction in range of cervical motion on serial long-term follow-up in patients undergoing oblique corpectomy for cervical spondylotic myelopathy

Purpose

To determine whether motion preservation following oblique cervical corpectomy (OCC) for cervical spondylotic myelopathy (CSM) persists with serial follow-up.

Methods

We included 28 patients with preoperative and at least two serial follow-up neutral and dynamic cervical spine radiographs who underwent OCC for CSM. Patients with an ossified posterior longitudinal ligament (OPLL) were excluded. Changes in sagittal curvature, segmental and whole spine range of motion (ROM) were measured. Nathan’s system graded anterior osteophyte formation. Neurological function was measured by Nurick’s grade and modified Japanese Orthopedic Association (JOA) scores.

Results

The majority (23 patients) had a single or 2-level corpectomy. The average duration of follow-up was 45 months. The Nurick’s grade and the JOA scores showed statistically significant improvements after surgery (p < 0.001). 17 % of patients with preoperative lordotic spines had a loss of lordosis at last follow-up, but with no clinical worsening. 77 % of the whole spine ROM and 62 % of segmental ROM was preserved at last follow-up. The whole spine and segmental ROM decreased by 11.2° and 10.9°, respectively (p ≤ 0.001). Patients with a greater range of segmental movement preoperatively had a statistically greater range of movement at follow-up. The analysis of serial radiographs indicated that the range of movement of the whole spine and the range of movement at the segmental spine levels significantly reduced during the follow-up period. Nathan’s grade showed increase in osteophytosis in more than two-thirds of the patients (p ≤ 0.01). The whole spine range of movement at follow-up significantly correlated with Nathan’s grade.

Conclusions

Although the OCC preserves segmental and whole spine ROM, serial measurements show a progressive decrease in ROM albeit without clinical worsening. The reduction in this ROM is probably related to degenerative ossification of spinal ligaments.     

Segmental anterior cervical corpectomy and fusion with preservation of middle vertebrae in the surgical management of 4-level cervical spondylotic myelopathy

Purpose

To compare perioperative parameters, clinical outcomes, radiographic parameters, and complication rates of segmental anterior cervical corpectomy and fusion (sACCF) plus preservation of middle vertebrae with those of cervical laminectomy plus fusion (CLF) in 67 patients with 4-level cervical spondylotic myelopathy (CSM).

Methods

Between July 2006 and May 2012, 67 consecutive patients [42 males and 25 females; mean age 57.8 years (range 34–77 years)] with 4-level CSM who underwent surgery and were followed for more than 1 year were enrolled in this study and divided into sACCF and CLF groups. The study compared perioperative parameters; surgery-related and instrumentation- and graft-related complication rates; clinical parameters; patient satisfaction; and radiologic parameters.

Results

Significant improvements were seen from preoperative to postoperative in both groups for all three measures of clinical outcome; between-group comparison revealed no significant difference for two of the three measures and significantly better scores for the CLF group in the third. Satisfaction was rated as excellent or good by 79.5 % of the sACCF group and 71.4 % of the CLF group, which was not a significant difference. Mean postoperative cervical lordosis was significantly greater in the sACCF group than in the CLF group. Blood loss and operative time were significantly greater in the CLF group than in the sACCF group and complication rate significantly lower for the sACCF group.

Conclusions

sACCF with preservation of middle vertebrae is a safe, reliable, and effective alternative procedure for the treatment of 4-level CSM.     

Cervicothoracic junction fracture/subluxation after multilevel anterior cervical spine fusion surgery

Background context

Several authors have reported cervical dislocations and fracture-dislocations above, below or through the fused cervical segment after cervical fusion. No previous reports have described fracture/dislocations at the cervicothoracic junction (CTJ) after multilevel anterior cervical spine fusion.

Purpose

To report CTJ fracture/subluxation after multilevel anterior cervical spine fusion surgery, a technique for surgical management and strategies to prevent this avoidable complication.

Study design

A case report and review of the literature.

Methods

A 61-year-old women underwent anterior cervical decompression and fusion (ACDF) from C3 to C7. The patient did well postoperatively until she suffered a CTJ fracture/subluxation 4?months later sustained during a fall.

Results

The patient underwent posterior and anterior fusion surgery C7–T2. Radiographs 2?years after her reconstruction surgery showed solid fusion from C3 to T2.

Conclusions

The CTJ area is susceptible to injury because it represents the transition between mobile and relatively immobile portions of the spine, especially when a long lever arm is created by a low cervical fusion. It is difficult to image with plain radiographs, and therefore, injury may be easily overlooked. If overlooked, severe neurological injury can result. Anterior and posterior fusion is often necessary to appropriately stabilize the CTJ after fracture/dislocation.     

Subaxial cervical juxtafacet cysts: single institution surgical experience and literature review

Objectives

Juxtafacet cysts (JFCs) of the subaxial cervical spine are rare causes of neurological deficits. Their imaging characteristics, relationship to segmental instability, and potential for inducing acute symptomatic deterioration have only been described in a few case reports and small case series. The objective of the current study was to review the surgical experience at our center and across the literature to better define these variables.

Methods

A single-institution, multisurgeon series of 12 consecutive patients (mean age 63.4 years, range 52–83 years) harboring 14 JFCs treated across 9 years was retrospectively reviewed. Clinical history, neurological status, preoperative imaging, operative findings, pathology, and postoperative outcomes were obtained from medical records. The mean follow up was 9.2?±?7.8 months. A literature review identified 35 studies with 89 previously reported cases of surgically treated subaxial cervical JFCs.

Results

Consistent with previously reported cases, most JFCs in our series involved the C7/T1 level. Nine patients reported axial neck pain, 12 patients had radicular symptoms, four patients had myelopathy, and one patient experienced rapid neurological decline attributable to cystic hemorrhage. Cyst expansion without hemorrhage caused subacute deterioration in one patient. All patients experienced sensory and/or motor improvement following surgical decompression. Preoperative axial neck pain improved in eight of nine patients (89 %). Seven out of 12 patients (58 %) underwent fusion either at the time of decompression (six patients) or at a delayed timepoint within the follow-up period (one patient). Prior history of cervical instrumentation, hypermobility on dynamic imaging, and other risk factors for segmental instability were more common in our series than in previous reports.

Conclusions

Our findings lead us to advocate for early decompression rather than prolonged conservative treatment, for pre- and postoperative dynamic imaging, and for fusion in selected cases as an initial surgical consideration.     

Biomechanical evaluation of a low profile, anchored cervical interbody spacer device in the setting of progressive flexion-distraction injury of the cervical spine

Introduction

Anterior cervical decompression and fusion is a well-established procedure for treatment of degenerative disc disease and cervical trauma including flexion-distraction injuries. Low-profile interbody devices incorporating fixation have been introduced to avoid potential issues associated with dissection and traditional instrumentation. While these devices have been assessed in traditional models, they have not been evaluated in the setting of traumatic spine injury. This study investigated the ability of these devices to stabilize the subaxial cervical spine in the presence of flexion-distraction injuries of increasing severity.

Methods

Thirteen human cadaveric subaxial cervical spines (C3–C7) were tested at C5–C6 in flexion–extension, lateral bending and axial rotation in the load-control mode under ±1.5 Nm moments. Six spines were tested with locked screw configuration and seven with variable angle screw configuration. After testing the range of motion (ROM) with implanted device, progressive posterior destabilization was performed in 3 stages at C5–C6.

Results

The anchored spacer device with locked screw configuration significantly reduced C5–C6 flexion–extension (FE) motion from 14.8 ± 4.2 to 3.9 ± 1.8°, lateral bending (LB) from 10.3 ± 2.0 to 1.6 ± 0.8, and axial rotation (AR) from 11.0 ± 2.4 to 2.5 ± 0.8 compared with intact under (p < 0.01). The anchored spacer device with variable angle screw configuration also significantly reduced C5–C6 FE motion from 10.7 ± 1.7 to 5.5 ± 2.5°, LB from 8.3 ± 1.4 to 2.7 ± 1.0, and AR from 8.8 ± 2.7 to 4.6 ± 1.3 compared with intact (p < 0.01). The ROM of the C5–C6 segment with locked screw configuration and grade-3 F-D injury was significantly reduced from intact, with residual motions of 5.1 ± 2.1 in FE, 2.0 ± 1.1 in LB, and 3.3 ± 1.4 in AR. Conversely, the ROM of the C5–C6 segment with variable-angle screw configuration and grade-3 F-D injury was not significantly reduced from intact, with residual motions of 8.7 ± 4.5 in FE, 5.0 ± 1.6 in LB, and 9.5 ± 4.6 in AR.

Conclusions

The locked screw spacer showed significantly reduced motion compared with the intact spine even in the setting of progressive flexion-distraction injury. The variable angle screw spacer did not sufficiently stabilize flexion–distraction injuries. The resulting motion for both constructs was higher than that reported in previous studies using traditional plating. Locked screw spacers may be utilized with additional external immobilization while variable angle screw spacers should not be used in patients with flexion-distraction injuries.     

Early dysphagia complicating anterior cervical spine surgery: incidence and risk factors

Background

Dysphagia is a common complication of anterior cervical spine surgery, and most of them occurred in the early postoperative period. This study aimed to determine the incidence of early dysphagia after anterior cervical spine surgery and to identify its risk factors.

Methods

A review of 186 consecutive patients undergoing anterior cervical spine surgeries in a 3-year period was performed. Dysphagia at postoperative 1 month was surveyed, and the severity of dysphagia was evaluated. Demographic information and procedural characters were collected to determine their relationships to dysphagia.

Results

A total of 50 patients developed early postoperative dysphagia, including 23 males and 27 females. The incidence of early dysphagia after anterior cervical spine surgery was 26.9 % in this study. Mild, moderate, and severe dysphagia were found in 30, 14, and 6 patients, respectively. Female, advanced age, multi-levels surgery, use of plate, and a big protrusion of plate were found to be significantly increased early dysphagia after anterior cervical spine surgery.

Conclusion

There is a relatively high incidence of early dysphagia after anterior cervical spine surgery, which may be attributable to multiple factors.     

Transfacet screw fixation of the subaxial cervical spine—how I do it?

Background

Transfacet screw fixation is a biomechanically effective way of fusing the subaxial cervical spine. The technique used by this author is described.

Methods

With the patient in prone position, a conventional posterior exposure of the cervical spine is done. The entry point used by this author is 2 mm above the middle of the lateral mass without any lateral angulation. Under fluoroscopic guidance the facet is drilled until all the four cortical surfaces are purchased. Then the depth is measured to assess the length of the screw required. This is followed by tapping and screw insertion both of which are done under fluoroscopic control. All screws are placed prior to laminectomy to decompress the cervical cord.

Conclusions

This is a simple, inexpensive and biomechanically effective way of stabilizing the subaxial cervical spine.     

Investigation of coupled bending of the lumbar spine during dynamic axial rotation of the body

Purpose

Little is known about the coupled motions of the spine during functional dynamic motion of the body. This study investigated the in vivo characteristic motion patterns of the human lumbar spine during a dynamic axial rotation of the body. Specifically, the contribution of each motion segment to the lumbar axial rotation and the coupled bending of the vertebrae during the dynamic axial rotation of the body were analyzed.

Methods

Eight asymptomatic subjects (M/F, 7/1; age, 40–60 years) were recruited. The lumbar segment of each subject was MRI scanned for construction of 3D models of the vertebrae from L2 to S1. The lumbar spine was then imaged using a dual fluoroscopic system while the subject performed a dynamic axial rotation from maximal left to maximal right in a standing position. The 3D vertebral models and the fluoroscopic images were used to reproduce the in vivo vertebral motion. In this study, we analyzed the primary left–right axial rotation, the coupled left–right bending of each vertebral segment from L2 to S1 levels.

Results

The primary axial rotations of all segments (L2–S1) followed the direction of the body axial rotation. Contributions of each to the overall segment axial rotation were 6.7° ± 3.0° (27.9 %) for the L2–L3, 4.4° ± 1.2° (18.5 %) for the L3–L4, 6.4° ± 2.2° (26.7 %) for the L4–L5, and 6.4° ± 2.6° (27.0 %) for the L5–S1 vertebral motion segments. The upper segments of L2–L3 and L3–L4 demonstrated a coupled contralateral bending towards the opposite direction of the axial rotation, while the lower segments of L4–L5 and L5–S1 demonstrated a coupled ipsilateral bending motion towards the same direction of the axial rotation. Strong correlation between the primary axial rotation and the coupled bending was found at each vertebral level. We did not observe patterns of coupled flexion/extension rotation with the primary axial rotation.

Conclusions

This study demonstrated that a dynamic lumbar axial rotation coupling with lateral bendings is segment–dependent and can create a coordinated dynamic coupling to maintain the global dynamic balance of the body. The results could improve our understanding of the normal physiologic lumbar axial rotation and to establish guidelines for diagnosing pathological lumbar motion.     

C5 nerve root palsy following decompression of cervical spine with anterior versus posterior types of procedures in patients with cervical myelopathy

Purpose

C5 palsy is a well-known complication of cervical spine decompression surgery. The complication develops in both posterior and anterior approaches. We aimed to review reports regarding postoperative C5 palsy in hopes for better prevention and treatment of this morbidity.

Method

We systematically reviewed and evaluated the abstracts and full texts of the identified papers in the literature. We reviewed and analyzed papers published between January 1970 and February 2015 regarding C5 palsy as a complication of cervical surgical procedures. We made statistical comparisons as much as possible.

Results

We did not find any statistical significance between the pathologies (p = 0.088) and between the surgical routes (p = 0.486). There was statistical significance between the types of procedures (p < 0.05). Posterior laminectomy had low incidence of C5 palsy when compared to laminectomy and fusion (p = 0.029) and laminoplasty (p = 0.37). There was no statistically significant difference between anterior cervical decompression and fusion and other procedures (p > 0.05).

Conclusion

Some studies conclude that anterior procedure is more safe. Of all anterior procedures, the multilevel ACDF had the lowest incidence of C5 palsy. The hybrid technique can be chosen for more than two-vertebra corpectomy. In term of posterior procedures, laminectomy is safer. To prevent C5 palsy, electromyography can be used as a sensitive predictor and selective foraminotomy can be performed.

     

Radiological studies on the best entry point and trajectory of anterior cervical pedicle screw in the lower cervical spine

Objective

To explore the best entry point and trajectory of anterior cervical transpedicular screws in the lower cervical spine by radiological studies, and provide reference for clinical application.

Methods

Fifty patients were scanned by computed tomography and confirmed no obvious defect of the cervical spine. On horizontal axis, camber angle (α) and axial length (AL) were measured from C₃ to C₇. On sagittal view, the cranial or caudal angle (β) and sagittal length (SL) were also measured from C₃ to C₇. On the sagittal and horizontal planes vertebrae were respectively divided into four areas, ordered 1–4, on the anterior side of the pedicle. The areas and angles of pedicle intersect into the vertebral body were recorded. We inserted six anterior pedicle screws into the lower cervical spine of three patients by this technique.

Results

On transverse plane, camber angle (α) of C₃–C₅ increased gradually, while it decreased from C₅ to C₇. On sagittal view, C₃ and C₄ pedicles showed cranial tilting, while C₅ to C₇ were caudally tilted. AL and SL values increased gradually from C₃ to C₇. The number of the intersections of C₃–C₇ in each area was also different. Six pedicle screws of three cases were inserted into the lower cervical spine with proper placement and no complications.

Conclusion

Anterior transpedicular screw (ATPS) is a theoretically feasible option for internal fixation. The technique described in this paper was subsequently used in three patients without complication. Future improvement of ATPS insertion remains necessary for this technically demanding procedure.     

Tandem age-related lumbar and cervical intervertebral disc changes in asymptomatic subjects

Purpose

To investigate the frequency of tandem lumbar and cervical intervertebral disc degeneration in asymptomatic subjects.

Methods

We evaluated magnetic resonance imaging (MRI) results from 94 volunteers (48 men and 46 women; mean age 48 years) for age-related intervertebral disc degeneration in the lumbar and cervical spine.

Results

MRI indicated degenerative changes in the lumbar spine in 79 subjects (84 %), with decreased disc signal intensity in 74.5 %, posterior disc protrusion in 78.7 %, anterior compression of the dura in 81.9 %, disc space narrowing in 21.3 %, and spinal canal stenosis in 12.8 %. These findings were more common in older subjects at caudal levels. MRI showed degenerative changes in both the lumbar and cervical spine in 78.7 % of the volunteers.

Conclusions

Degenerative findings in both the lumbar and cervical spine, suggesting tandem disc degeneration, was common in asymptomatic subjects. These results provide normative data for evaluating patients with degenerative lumbar and cervical disc diseases.     

The feasibility of transpedicular screw fixation of the subaxial cervical spine in the Arab population: a computed tomography-based morphometric study

Background

Transpedicular screw fixation of the cervical spine provides excellent biomechanical stability. The feasibility of inserting a 3.5-mm screw in the pedicle requires a minimum pedicle diameter of 4.5 mm. This diameter allows at least 0.5 mm bony bridge medially and laterally in order to avoid pedicle violation which can result in neurovascular complications. We aim to evaluate the feasibility of this technique in Arab people since no data are available about this population.

Materials and methods

This cross-sectional study involved a retrospective review of computed tomography scans of normal cervical spines of 99 Arab adults. Ten morphometric measurements were obtained. Data were analyzed using a p value of ≤0.05 as the cut-off level of statistical significance.

Results

Our sample included 63 (63.6 %) males and 36 (36.4 %) females, with a mean age of 35.5 ± 16.5 years. The morphometric parameters of C3–C7 spine pedicles were larger in males than in females. The outer pedicle width (OPW) was <4.5 mm in >25 % of all subjects at C3–C6 vertebrae. Statistically significant differences in the OPW between males and females were noted at C3 (p = 0.032) and C6 (p = 0.004).

Conclusions

Inserting pedicle screws in the subaxial cervical spine is feasible among the majority of Arab people.

Level of evidence

Level 3.

     

Transvertebral anterior cervical foraminotomy: midterm outcomes of clinical and radiological assessments including the finite element method

Purpose

The aim of this study was to compare the clinical features, radiological changes, biomechanical effects, and efficacy in patients treated by transvertebral anterior foraminotomy. Preservation of segmental motion and avoidance of adjacent segment degeneration are theoretical advantages of transvertebral anterior foraminotomy. In practice, this procedure is minimally invasive and has shown good clinical results, especially in patients with unilateral cervical radiculopathy.

Method

We conducted a retrospective minimum 2-year follow-up study of the cervical spine of patients treated by transvertebral anterior foraminotomy at our institution. Radiological outcomes, which were estimated by measuring disc and functional spinal unit heights, and the angle and range of motion (ROM) from C2 to C7 of the functional spinal unit and adjacent segments were evaluated. Furthermore, a three-dimensional finite element method was used to biomechanically analyze the strength of the postoperative vertebral body.

Results

Between 2004 and 2009, 34 patients underwent surgery. The improvement rate was 94.2 %. The average flexion–extension ROM from C2 to C7 was 36.6 ± 16.6°. On plain radiographs, the disc height and ROM and height of the functional spinal unit in the operated segment were not significantly decreased relative to the preoperative levels. The finite element method also revealed that there was no difference in strength between the pre- and postvertebral bodies.

Conclusions

These results demonstrate that biomechanical stability was achieved. Transvertebral anterior cervical foraminotomy did not limit motion in the operated and adjacent segments and did not cause a significant decrease in disc and vertebral heights after surgery.