Short Communication Effect of sulfated polysaccharides on hepatocyte adhesion

The effects of sulfated polysaccharides on hepatocyte adhesion on the polystyrene dish and fibronectin-coated dish were investigated. Dextran sulfate and synthetic mannopyranan sulfate slightly inhibited hepatocyte adhesion on fibronectin-coated dish, while heparin showed no effect. On the other hand, hepatocyte adhesion on polystyrene dishes was stimulated in the presence of sulfated polysaccharides in the medium.     

Preparation of lactose-silk fibroin conjugates and their application as a scaffold for hepatocyte attachment

We prepared glycoconjugates (Lac-CY-SF) by the homogeneous chemical modification of solubilized silk fibroin (SF) with lactose bearing the galactose residue using cyanuric chloride (CY) as a coupling spacer and examined the usefulness of their application as a scaffold for hepatocyte attachment. The covalent immobilization of lactose into SF was assessed by several criteria including 1H-NMR measurements and reactions with lectins such as Ricinus communis agglutinin (RCA(120)) and fluorescein isothiocyanate-labeled RCA(120) (FITC-RCA(120)). The 1H-NMR spectrum of Lac-CY-SF showed new broad peaks attributed to methine and methylene protons of lactose, and by the integrated intensities of the peaks the weight ratio of lactose to SF in Lac-CY-SF was determined to be 0.20. Addition of RCA(120) to Lac-CY-SF solution caused an increase in the turbidity of the Lac-CY-SF solution. Incubation of Lac-CY-SF films with FITC-RCA(120) showed that the fluorescence emitted from the whole surface of Lac-CY-SF films. Furthermore, we examined the effect of the Lac-CY-SF conjugate-coating onto polystyrene culture dishes on the attachment of rat hepatocytes and their morphology. Attachment of hepatocytes onto the 0.1% (w/v) conjugate-coated dishes showed about an 8-fold increase as compared with that on uncoated dishes, being comparable to that on collagen-coated dishes, whereas the attachment on the SF-coated dishes was lower than that on uncoated dishes. Hepatocytes cultured onto the conjugate-coated dishes for 2.5 h showed smaller round-shaped morphology compared to those on collagen-coated dishes. After 2 days of culture in medium containing 100 nM insulin and 100 nM dexamethasone, hepatocytes on the conjugate-coated dishes formed monolayer islands with a slightly dispersed morphology, while hepatocytes cultured on collagen-coated dishes were uniformly spread flat. These results indicate that the Lac-CY-SF conjugates are useful as a scaffold for hepatocyte attachment, but the morphology of hepatocytes cultured on the conjugate-coated dishes is different from that on collagen-coated dishes.     

Different effects of nanophase and conventional hydroxyapatite thin films on attachment, proliferation and osteogenic differentiation of bone marrow derived mesenchymal stem cells

It is suggested that nanophase hydroxyapatite (nHAP) might have advantages over conventional hydroxyapatite (cHAP) as a biomaterial for bone regeneration. To be a satisfactory candidate for bone tissue engineering, it is important to support the growth and differentiation of bone marrow-derived mesenchymal stem cells (BMSCs). The purpose of this study is to determine whether nHAP as cell growth substrata could give better support for attachment, proliferation and osteogenic differentiation of BMSCs than cHAP. Materials and Methods: nHAP and cHAP films were prepared as the substrata for the cell growth. BMSCs obtained from rabbit were seeded on the films. Attachment, proliferation and osteogenic differentiation of BMSCs on the two kinds of films were evaluated. Results: Cell attachment ratio on nHAP films was significantly higher than that on cHAP films. Doubling time on nHAP films was significantly shorter than that on cHAP films. Amount of total proteins detected from cells cultured on nHAP films was significantly higher than that on cHAP films. However, alkaline phosphatase activity and osteocalcin content of the two groups showed no significant difference. Conclusions: nHAP films favored cell attachment and proliferation but not osteogenic differentiation of BMSCs compared with cHAP films.     

The effect of self-designed bifunctional RGD-containing fusion protein on the behavior of human keratinocytes and dermal fibroblasts

In this study, self-designed bifunctional RGD-containing fusion protein (BFP) was grafted on the petri dish to evaluate its cytotoxicity and attachment efficiency on primary cultured keratinocytes and dermal fibroblasts. Two lengths of the GRGDS sequences were separately fused to the N-terminus and C-terminus of the Trichoderma koningii cellobiohydrolase I gene cellulose-binding domain, to serve as linking molecule between the cell and the substrate. The grafting procedure was no more labor-intensive and could be done just in aqueous condition itself. The epidermal keratinocytes and dermal fibroblasts, harvested and separated from human foreskin, were cultured in serum-free keratinocyte culture medium and DMEM, respectively. The BFP was dissolved in double-deionized water, and was prepared at different concentrations. The BFP solution was subsequently added into the petri dish for grafting. MTT assay, total DNA measurement, and lactate dehydrogenase analysis were used to evaluate the cell viability, cell proliferation, and cytotoxicity. The immunochemical stain and SEM examination were chosen to make sure that the cultured cells still kept in phenotype. The results showed that the self-designed BFP was successfully coated on the petri dish to improve the cells' adhesion. The whole coating procedure was just done in aqueous solution without any organic solvent being involved. This method was much simpler than the traditional one, and there was no possibility to damage the immobilized biomolecules. From the results of the study, BFP could enhance attachment of keratinocytes and dermal fibroblasts without losing normal cell morphology and keep keratinocytes on the desired differentiation pathway. We believe that coating BFP on petri dish not only enhanced the keratinocyte attachment but also promoted keratinocytes proliferation. We suggest that the self-designed BFP has a great potential to apply on surface modification for the tissue-engineering scaffolds in the future.     

Modulation of mesenchymal stem cells behaviors by chitosan/gelatin/pectin network films

In this article, the chitosan/gelatin/pectin (CGP) network films were prepared to build appropriate physicochemical and mechanical microenvironment for attachment, proliferation, and differentiation of mesenchymal stem cells (MSCs). Results suggested that the hydrophilicity and mechanical character of CGP composites films could be modulated via adjusting the pectin content in the composites. The investigations of attachment and proliferation behaviors of mesenchymal stem cells (MSCs) on the CGP films were carried out. The morphology of cells was observed with hematoxylin/eosin staining (HE) and scanning electron microscope (SEM). The osteogenic differentiation of MSCs was investigated via ALP and polymerase chain reaction (PCR). Results suggested that the CGP films have excellent biocompatibility. MSCs seeded on CGP (0.1) film show higher proliferation capacity compared with other samples. Moreover, osteogenic differentiation of MSCs also depends on the properties of the substrate. The MSCs seeded on CGP (0.5) expressed the highest ALP activity, osteogenic gene expression and mineral formation capacity. These results suggest that the composition of the CGP network films could effectively modulate their physicochemical and mechanical properties and further regulate the cell behaviors of MSCs.     

Effects of substrate characteristics on bone cell response to the mechanical environment

The effect of substrate characteristics on primary human bone cell response to mechanical loading was investigated in this study. The substrates comprised organic and inorganic materials with a range of hydrophilic and hydrophobic features. Substrate surface topography varied from smooth to particulate to porous. It was found that hydrophilic substrates such as borosilicate glass facilitated bone cell adhesion, in contrast to hydrophobic substrates such as poly(L-lactic acid), in which clumps of cells grew unevenly across the substrate surface. All primary bone cells cultured in the various collagen-coated substrates were responsive to mechanical stimulation. The study showed that, at a low strain level of 1000μstrain, mechanical stimulation enhanced bone cell differentiation rather than proliferation. Coating the substrates with collagen type l enhanced cell adhesion and promoted an elongated cell morphology, indicating that the presence of specific binding sites on a substrate may be more important than its hydrophilic properties, regardles of the substrate topography.     

Rat bone marrow stromal cell osteogenic differentiation and fibronectin adsorption on chitosan membranes: the effect of the degree of acetylation

Cell adhesion, migration, and proliferation of a few anchorage-dependent cells cultured on chitosan (Ch) matrices are influenced by the degree of N-acetylation (DA) of Ch. In the present work, we examined the influence of the DA on the attachment, spreading, proliferation, and osteogenic differentiation of rat bone marrow stromal cells (rBMSCs). Ch membranes were characterized in terms of surface morphology, roughness, and wettability, and in terms of adsorption of an adhesive protein, fibronectin (Fn). Chs with DAs in the range of 4 to 49% were used. Among the Ch samples, the DA of 4% led to the highest Fn surface concentration, both from single protein solution and from diluted serum. Furthermore, the levels of Fn adsorbed from serum found for this DA were threefold higher than for the tissue culture polystyrene control, indicating that in the presence of competitive proteins Ch is more specific toward Fn adsorption than tissue culture polystyrene. rBMSCs cultured on Ch carrying a DA of 4% were able to spread, proliferate, and differentiate, reaching a higher level of osteogenic differentiation than on the control, despite the lower cell attachment observed for all Ch samples. Because the Ch sample with a DA of 4% showed the highest Fn adsorption from serum, we suggest that cell adhesion, spreading, and osteogenic differentiation of rBMSCs on Ch may be mediated by the adsorbed layer of Fn.     

Biomimetic surface modification of poly(L-lactic acid) with chitosan and its effects on articular chondrocytes in vitro

The objective of this study was to investigate the efficiency of two treatments for poly(L-lactic acid) (PLLA) surface modification with chitosan, via entrapment and coupling by using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and N-hydroxysuccinimide. The properties of original PLLA films, chitosan-entrapped and coupled PLLA films were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The contact angle indicated the change in hydrophilicity and the ESCA data suggested that the modified PLLA films became enriched with nitrogen atoms. The cytocompatibility of modified PLLA films might be improved. Therefore, the attachment and proliferation of bovine articular chondrocyte seeded on modified PLLA films and control one were examined. A whole cell enzyme-linked immunosorbent assay (Cell ELISA) that detects the BrdU incorporation during DNA synthesis and collagen type II secretion was applied to evaluate the chondrocytes on different PLLA films and tissue culture plates. Cell viability was estimated by the MTT assay and cell function were assessed by measuring sulfated glycosaminoglycan secreted by chondrocytes. These results implied that chitosan used to modify PLLA surface through entrapment and coupling could enhance the chondrocyte adhesion, proliferation and function.     

Enhanced expression of the osteoblastic phenotype on substrates that modulate fibronectin conformation and integrin receptor binding

Integrins represent the primary mechanism of cell-extracellular matrix interactions and control cell morphology, proliferation, and differentiation. We have previously shown that substrate-dependent modulation of adsorbed fibronectin (Fn) conformation alters alpha5beta1 integrin binding to Fn and directs C2C12 myoblast proliferation and differentiation (Mol. Biol. Cell 10 (1999) 785). The model substrates used in these experiments were bacteriological (untreated) polystyrene (B), tissue culture polystyrene (T), and type-I collagen-coated T (C). In the present study, we examined MC3T3-EI osteoblast-like cell differentiation on Fn-coated B, T, and C substrates. Immunofluorescence staining revealed substrate-dependent differences in integrin alpha5beta1 binding and clustering into focal adhesions (C > T > B), consistent with our previous integrin binding analysis. Alkaline phosphatase activity and matrix mineralization showed substrate-dependent differences (C > T > B, p < 0.05). Similar trends were observed for alkaline phosphatase, osteocalcin, and bone sialoprotein gene expression. Blocking experiments with antibodies directed against Fn completely inhibited matrix mineralization on Fn-coated C, indicating that Fn is critical to expression of the osteoblastic phenotype on this extracellular matrix component. These substrate-dependent differences in osteoblast differentiation correlated with differences in alpha5beta1 binding, suggesting that these differences arise from substrate modulation of integrin-matrix interactions. Substrate-dependent modulation of cell function may provide a versatile mechanism to control cell responses in numerous biomedical applications.     

Proliferation and differentiation of human mesenchymal stem cell encapsulated in polyelectrolyte complexation fibrous scaffold

A biofunctional scaffold was constructed with human mesenchymal stem cells (hMSCs) encapsulated in polyelectrolyte complexation (PEC) fibers. Human MSCs were either encapsulated in PEC fibers and constructed into a fibrous scaffold or seeded on PEC fibrous scaffolds. The proliferation, chondrogenic and osteogenic differentiation of the encapsulated and seeded hMSCs were compared for a culture period of 5.5 weeks. Gene expression and extracellular matrix production showed evidences of chondrogenesis and osteogenesis in the cell-encapsulated scaffolds and cell-seeded scaffolds when the samples were cultured in the chondrogenic and osteogenic differentiation media, respectively. However, better cell proliferation and differentiation were observed on the hMSC-encapsulated scaffolds compared to the hMSC-seeded scaffolds. The study demonstrated that the cell-encapsulated PEC fibers could support proliferation and chondrogenic and osteogenic differentiation of the encapsulated-hMSCs. Together with our previous works, which demonstrated the feasibility of PEC fiber in controlled release of drug, protein and gene delivery, the reported PEC fibrous scaffold system will have the potential in composing a multi-component system for various tissue-engineering applications.     

Attachment,spreading and growthin vitro of highly malignant and low malignant murine fibrosarcoma cells

Highly malignant cell lines and low-malignant cell lines isolated from three different methylcholanthrene-induced murine fibrosarcomas were examined for their ability to attach to plastic dishes and collagen-coated dishes under serumfree conditions and in the presence of serum. Most of the cells from the three highly malignant lines attached and spread under all conditions. By 72h, there was a significant increase in the number of cells indicating that at least some of the cells had undergone division (even in the absence of serum). In contrast, fewer of the cells from the three low-malignant lines attached and spread on the plastic or collagen substrates in the absence of serum or in the presence of 0.1 per cent serum. However, when 15g laminin per dish was added along with the lowmalignant cells, they then attached and spread on the plastic and collagen-coated dishes. Previous studies have indicated that the highly malignant lines express cell surface antigens that cross-react with laminin while the low-malignant cell lines do not. We speculate that the differences between the high- and low-malignant cells in the expression of cell surface laminin-like antigens contribute to the dissimilarities in attachment and spreading capacity. These differences may also contribute to the dissimilarity between these cells in malignant potential.     

Osteoblast-like cell response to bioactive composites-surface-topography and composition effects

Two bioactive composites, containing 40 vol % filler in high-density polyethylene (HDPE), were investigated to examine the effects of different filler compositions and different surface patterning. The first composite, known as HAPEX, consists of hydroxyapatite within HDPE, and the second composite, known as AWPEX, consists of glass-ceramic apatite-wollastonite in HDPE. Surface topography effects at 5-50 and 100-150 microm were explored, with cell morphology analyzed with the use of scanning electron microscopy and confocal laser scanning microscopy (CLSM). Biochemical assays of adenosine triphosphate and alkaline phosphatase were used to analyze osteoblast-like cell proliferation and differentiation. For both composites, cell alignment was seen along grooves, pillars, and wells, with preferential cell attachment to ceramic particles within the polymer matrices. HAPEX showed significantly increased cell proliferation over AWPEX (P < 0.005). However, greater cell differentiation occurred for AWPEX over HAPEX (P < 0.005). Polishing significantly increased osteoblast-like cell response over as-cut samples, but surface-topography changes above 50 microm had no consistent effect. Smaller-scale features also showed no significant trend in terms of cell proliferation, but did show significant differences in cell differentiation (P < 0.05). CLSM imaging of actin and vinculin localization within cells showed the greatest change in comparison to polished surface controls for cells cultured on samples with surface features below 50 microm. The fact that similar observations were made for both HAPEX and AWPEX indicated that, for these experiments, the effects of surface topography more strongly influenced cell response than chemical composition.     

Physico-chemical and biological evaluation of excimer laser irradiated polyethylene terephthalate (pet) surfaces

The aim of this work was to investigate the consequences of excimer laser irradiation on the physico-chemical and biological properties of polyethylene terephthalate (PET) films, currently used for medical devices. Three PET films from different origins were studied in the present work, chosen with respect to their chemical and physical properties, which are of high importance for ulterior medical application as vascular prostheses. Multiple assays were carried out to characterize the physical and chemical effects of the laser irradiation: surface morphology tests (light microscopy, Dektak profilometer and confocal laser scanning microscopy) showed the strong transformation of the surface with the laser treatment. Contact angle measurements revealed a significant increase of the surface energy for each PET depending on the applied fluency. Finally XPS characterization of the surface demonstrated the appearance of new chemical species favorable for cell attachment. This aspect had to be strongly considered regarding to the multiple biological effects of laser irradiated surfaces on living cells. Different cell culture experiments were carried out with L132 human epithelial cells after 6-days culture: proliferation and vitality rate, cell adhesion and cell morphology. Results clearly revealed that laser treatment improved cell proliferation (up to 140% with respect to controls), vitality (10% higher than controls), morphology and adhesion kinetics (more than 16% of control). A significant correlation (R2=0.906) was also established on one PET between the fluencies of laser treatment and the cellular response. These results emphasized high importance of the choice of the PET material for a medical application: only one of the three considered PET films showed really improved cellular response.     

Osteoblast response on Ti- and Zr-based bulk metallic glass surfaces after sand blasting modification

The present study aimed to evaluate the osteoblast response on Ti- and Zr-based BMG surfaces sand blasted with different grit corundums for implant application, with mechanically polished disks before sand blasting as control groups. The surface properties were characterized by scanning electron microscopy (SEM), contact angle, and roughness measurements. Further evaluation of the surface bioactivity was conducted by MG63 cell attachment, proliferation, morphology, and alkaline phosphatase (ALP) activity on the sample surfaces. It was found that corundum sand blasting surfaces significantly increased the surface wettability and MG63 cell attachment, cell proliferation, and ALP activity in comparison with the control group surfaces. Besides, the sample surface treated by large grit corundum is more favorable for cell attachment, proliferation, and differentiation than samples treated by small grit corundum, indicating that it might be effective for improving implant osseointegration in vivo. ? 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2012.     

Human osteoblast response to pulsed laser deposited calcium phosphate coatings

Octacalcium phosphate (OCP) and Mn(2+)-doped carbonate hydroxyapatite (Mn-CHA) thin films were deposited on pure, highly polished and chemically etched Ti substrates with pulsed laser deposition. The coatings exhibit different composition, crystallinity and morphology that might affect their osteoconductivity. Human osteoblasts were cultured on the surfaces of OCP and Mn-CHA thin films, and the cell attachment, proliferation and differentiation were evaluated up to 21 days. The cells showed a normal morphology and a very good rate of proliferation and viability in every experimental time. Alkaline phosphatase activity was always higher than the control and Ti groups. From days 7 to 21 collagen type I production was higher in comparison with control and Ti groups. The level of transforming growth factor beta 1 (TGF-beta1) was lower at 3 and 7 days, but reached the highest values during following experimental times (14 and 21 days). Our data demonstrate that both calcium phosphate coatings favour osteoblasts proliferation, activation of their metabolism and differentiation.     

Human corneal endothelial cell growth on a silk fibroin membrane

Tissue engineering of the cornea could overcome shortages of donor corneas for transplantation and improve quality. Our aim was to grow an endothelial layer on a substratum suitable for transplant. Silkworm (Bombyx mori) fibroin was prepared as 5 μm thick transparent membranes. The B4G12 cell line was used to assess attachment and growth of human corneal endothelial cells on fibroin and compare this with a reference substratum of tissue-culture plastic. To see if cell attachment and proliferation could be improved, we assessed coatings of collagen IV, FNC Coating Mix(?) and a chondroitin sulphate-laminin mixture. All the coatings improved the final mean cell count, but consistently higher cell densities were achieved on a tissue-culture plastic rather than fibroin substratum. Collagen-coated substrata were the best of both groups and collagen-coated fibroin was comparable to uncoated tissue-culture plastic. Only fibroin with collagen coating achieved cell confluency. Primary human corneal endothelial cells were then grown using a sphere-forming technique and when seeded onto collagen-coated fibroin they grew to confluency with polygonal morphology. We report the first successful growth of primary human corneal endothelial cells on coated fibroin as a step in evaluating fibroin as a substratum for the transplantation of tissue-constructs for endothelial keratoplasty.     

Improved osteogenic differentiation of human marrow stromal cells cultured on ion-induced chemically structured poly-epsilon-caprolactone

The ability to control cell proliferation/differentiation, using material surface, is a main goal in tissue engineering. The objective of this study was to evaluate the attachment, proliferation and differentiation to the osteoblastic phenotype of human marrow stromal cells (MSC) when seeded on poly-epsilon-caprolactone (PCL) thin films before and after irradiation with 10 keV He+. The polymeric surface was characterized as surface chemical structure and composition, roughness and morphology on the micro- and nano-scale, wettability and surface free energy parameters. MSC were obtained from patients undergoing routine hip replacement surgery, expanded in vitro and cultured on untreated PCL and He+ irradiated PCL films for up to 4-5 weeks in osteogenic medium. He+-irradiation led to slight smoothening of the surface and different nanoscale surface chemical structure, while surface free energy resulted unchanged in comparison to untreated PCL. The results from biological testing demonstrated that early attachment and further proliferation, as well as osteoblastic markers, were higher for MSC on He+-irradiated PCL. In conclusion, the change of PCL surface properties induced by ion beam irradiation is confirmed to enhance the adhesion of MSC and support their differentiation.     

Heparin-inhibitable lectin activity of the filamentous hemagglutinin adhesin of Bordetella pertussis.

Bordetella pertussis, the etiologic agent of whooping cough, produces an outer membrane-associated filamentous hemagglutinin (FHA) which is the major adhesin of this organism. FHA exhibits a lectin-like activity for heparin and dextran sulfate. By using in vitro adherence assays to cultured epithelial cells, the attachment of B. pertussis was reduced in the presence of sulfated polysaccharides such as heparin and dextran sulfate but not in the presence of dextran, indicating the crucial role of polysaccharide sulfation. In addition, inhibition of cellular sulfation by chlorate treatment of the cells resulted in a reduction of B. pertussis adherence, suggesting that epithelial cell surface-exposed sulfated glycoconjugates may serve as receptors for the microorganism. B. pertussis mutant strains deficient in FHA production expressed residual adherence that was no longer inhibited by sulfated polysaccharides. In addition, purified FHA displayed heparin-inhibitable binding to epithelial cells. Mapping experiments of the heparin-binding site of FHA indicated that this site is different from the RGD site and the recently proposed carbohydrate-binding site involved in the interaction of FHA with lactosylceramide. This result demonstrates that FHA contains at least three different binding sites, a feature unusual for bacterial adhesions but similar to features of eukaryotic adhesins and extracellular matrix proteins.     

胶原-纳米羟基磷灰石复合支架的细胞相容性

背景：观察成骨细胞在生物材料上的形态、增殖和分化等项目,可评估生物支架材料的生物相容性。 目的：观察复合支架材料纳米羟基磷灰石/胶原对成骨细胞增殖、分化的影响。 方法：取新生24 h内Wistar大鼠的颅盖骨,采用改良胶原酶消化法进行成骨细胞原代培养,取第3代细胞与纳米羟基磷灰石/胶原支架或普通羟基磷灰石材料体外复合培养。培养3,6,9 d后,观察材料周边的细胞形态及支架材料对细胞分化、增殖的影响。 结果与结论：纳米羟基磷灰石/胶原材料较普通的羟基磷灰石材料更有利于成骨细胞的黏附、生长、分化、增殖,证实其生物相容性更好,有望成为一种新型的骨组织工程支架材料。