Novel Random Low‐Band‐Gap Fluorene‐Based Copolymers for Deep Red/Near Infrared Light‐Emitting Diodes and Bulk Heterojunction Photovoltaic Cells

Summary: Novel readily soluble random low‐band‐gap conjugated copolymers (PFO–DTTP, E_g ≈ 1.77–2.00 eV) derived from 9,9‐dioctylfluorene (DOF) and 2,3‐dimethyl‐5,7‐dithien‐2‐yl‐thieno[3,4‐b]pyrazine (DTTP) were prepared. The solutions and the solid thin films of the copolymers absorbed light from 300–690 nm. Prototype photovoltaic cells from solid state composite films with the copolymer PFO–DTTP30 and [6,6]‐phenyl C₆₁ butyric acid methyl ester (PCBM) showed power conversion efficiencies up to 0.83% under an AM1.5 solar simulator (100 mW · cm⁻²). For electroluminescent devices, the emission peaks were around 734–780 nm. This indicates that the low band gap copolymers are promising materials for polymeric solar cells and deep red/near infrared light‐emitting diodes.

Synthesis of novel low‐band‐gap fluorene‐based copolymer.     

Synthesis and self‐assembly of polymers containing dicarboximide groups by living ring‐opening metathesis polymerization

Polymers with narrow molecular weight distributions and controlled architectures were generated by living ring‐opening metathesis polymerization of exo‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboximide. The dicarboximide units have been previously shown to exhibit biological activity, can selectively bind to the nucleic acid base adenine by hydrogen‐bonding, and are readily functionalizable. Block copolymers containing these moieties were generated, and underwent self‐assembly into nanoscale spherical aggregates, with surface localized molecular recognition motifs.

     

Chain Growth Polycondensation as a Polymer Generating Reaction in the Synthesis of Oligo(p‐phenyleneethynylene)s with Low Polydispersity

Summary: The polycondensation of 1‐ethynyl‐2,5‐dihexyl‐4‐iodobenzene in the presence of 1‐ethynyl‐2,5‐dihexyl‐4‐(2‐phenylethynyl)benzene proceeds according to the mechanism of initiated chain growth polycondensation. It has allowed the synthesis of oligomers with a desired molecular weight and a narrow molecular weight distribution. The reasons for the side reaction leading to the formation of diyne compounds are revealed and the presumed mechanism is given. This opens prospects for the preparation of defectless poly(p‐phenyleneethynylene)s with required molecular weights and narrow molecular weight distributions.

     

Hydrolytic Polycondensation of Bisphenol‐A‐Bischloroformate Catalyzed by Phase‐Transfer Catalysts

The hydrolytic interfacial polycondensation of bisphenol‐A‐bischloroformate was performed with four different phase‐transfer (PT) catalysts: N‐butylpyridinium bromide, triethylbenzylammonium (TEBA) chloride, tetrabutylammonium hydrogen sulfate, and tetraphenylphosphonium bromide. These polycondensations were conducted at 5 or 35 °C initial reaction temperature. The resulting polycarbonates were characterized by viscosity and SEC measurements and by MALDI‐TOF mass spectrometry. The four PT catalysts gave quite different results with respect to molecular weight and formation of cyclic polycarbonates. The highest molecular weights (number average, and weight average, ) were obtained with TEBA‐Cl. Lower temperatures and high feed ratios of TEBA‐Cl proved to be favorable for both high molecular weights and high fractions of cycles. Cyclic polycarbonates were detectable in the mass spectra up to 14 kDa (technical limit of the measurements). Low molecular weights in combination with unreacted chloroformate groups proved that the other PT‐catalysts were less efficient under the given reaction conditions.

MALDI‐TOF mass spectrum of the polycarbonate No. 3b .     

Polycondensations of Bisphenol‐A with Diphosgene or Triphosgene in Water‐Free Organic Solvents

Summary: Bisphenol‐A was polycondensed with diphosgene and excess pyridine in a mixture of dry dichloromethane and 1,4‐dioxane. The stoichiometry was varied to optimize the molecular weight. According to MALDI‐TOF mass spectra the fraction of cyclic polycarbonates increased with higher molecular weights. Analogous results were obtained with triphosgene. When pyridine was replaced by triethylamine, diethyl carbamoyl chloride was formed and an excess of diphosgene (plus triethylamine) yielded polycarbonates having one or two diethylcarbamate endgroups. However, the content of cycles increased again with the molecular weight and peaked for the sample with the maximum molecular weight. ¹H NMR endgroup analyses confirmed the interpretation of the MALDI‐TOF mass spectra. SEC measurement indicated high polydispersity indices (around 7) for samples rich in cycles.

     

Synthesis,Characterization and Field‐Effect Transistor Performance of Poly[2,6‐bis(3‐alkylthiophen‐2‐yl)benzo[1,2‐b;4,5‐b′]diselenophene]s

Benzo[1,2‐b:4,5‐b′]diselenophene (BDS) has been incorporated for the first time in a polymer. bis(Stannyl)‐functionalized BDS was copolymerized with 3,3′‐bis(alkyl)‐5,5′‐bithiophenes (dodecyl and tetradecyl side chains) through Stille copolymerization, to yield p‐type polymer semiconductors for organic field‐effect transistor application. The electronic and structural effect of the selenium atoms, compared to sulphur atoms in analogous copolymers, is described. The molecular weight has a decisive influence on the photophysical properties and supramolecular ordering, expressed in field‐effect transistor measurements. Saturation mobilities around 10^?2 cm² · V^?1s^?1 are obtained on standard silicon substrates.

     

Blue‐Emitting Polymers Based on 4‐Hydroxythiazoles Incorporated in a Methacrylate Backbone

The synthesis of two new monomers based on 4‐hydroxythiazoles, with a non‐classical chromophore structure similar to the luciferin dye of glowworms, is presented. These dyes are functionalized with methacrylates and copolymerized with methyl methacrylate using a RAFT polymerization process. The obtained polymers reveal PDI values below 1.2 and are characterized by NMR spectroscopy, SEC including a diode‐array detector, UV‐vis and fluorescence spectroscopy. In addition, thin films of the polymers are prepared by spin‐coating and investigated regarding their optical properties.

     

On the Mechanism of the Ring‐Expansion Polymerization of Thiiranes

Ring polymers are synthesized using a cyclic bifunctional thioester as initiator for REP of thiiranes. PMT yields satisfactory results, whereas polymerization with MT appears to develop dead polymeric material as by‐product and TBMT gives only negligible conversion rates. The process produces high yields and high conversion rates. The corresponding molecular weight distributions show increasing broadening and multimodal character with increasing reaction time due to thermodynamically controlled ring‐merging reactions between macrocycles. The polymerization rate of PMT obeys a pseudo first‐order kinetics with an activation energy of 38.8 kJ mol^?1. ¹H NMR, ESI‐MS, and glass transition temperatures independent of the molecular weight demonstrate the presence of cyclic polymer.

     

Block‐Selective Solvent Influence on Morphology of the Micelles Self‐Assembled by PS38‐b‐P(AA190‐co‐MA20)

Summary: The influence of block‐selective solvent on the self‐assembly of polystyrene‐block‐poly[(acrylic acid)‐co‐(methyl acrylate)] was studied. The nature of the block‐selective solvent, which is a binary solvent mixture with different composition, exerts remarkable influence on the morphology of the resulting micelles. When the block‐selective solvent is a binary solvent mixture of acetone and water with acetone content ranging from 0 to 90 vol.‐%, the resulting aggregates are core‐shell spheres with diameter about 60 nm, porous aggregates with diameter of 100, 180 and 250 nm, and core‐shell cauliflower‐like aggregates with size about 200 nm, respectively. The reason that the morphology of resulting micelles changes with acetone content has been discussed. The structure of the resulting micelles is further characterized in detail by DLS and SLS. Morphological tuning is also achieved by using a binary solvent mixture of ethanol and water or a binary solvent mixture of DMF and water as block‐selective solvent. In these cases, core‐shell spheres, hollow aggregates, and incompact aggregates are formed with the ethanol or DMF concentration ranging from 10 to 80 vol.‐%.

     

Solid‐State Olefin Metathesis: ADMET of Rigid‐Rod Polymers and Ring‐Closing Metathesis

Summary: Solid‐state olefin metathesis of rigid‐rod acyclic diene metathesis (ADMET) polymers and ring‐closing metathesis (RCM) have been investigated. 1,4‐Dipropoxy‐2,5‐divinylbenzene ( 4 ) was synthesized and used in a bulk ADMET polymerization to produce oligomers of dialkoxy poly(phenylene vinylene). The reaction was continued in the solid state, effectively doubling the molecular weight. Solid‐state RCM was investigated with a variety of solid dienes and metathesis catalysts, and demonstrated in low conversions using amide diene 5 with catalysts 9 , 13 , and 14 .

     

Synthesis and Photovoltaic Properties of Side‐Chain Liquid‐Crystal Click Polymers for Dye‐Sensitized Solar‐Cells Application

SCLCPs are synthesized using “click chemistry”. The resulting polymers, P1 and P2, have good solubilities and molecular‐weight distributions. Their and polydispersities are in the ranges of 26.7–8.4 × 10³ g · mol^?1 and 1.99–1.29, respectively. DSC and POM studies reveal that both polymers exhibit liquid‐crystalline behavior. P1 and P2 are found to display blue emission. DSSCs are fabricated using P1 and P2 as matrices for electrolytes. The maximum PCE of the P1‐ and P2‐based polymer electrolytes is 4.11% (at 1 sun). This synthesis route has again proven to be a useful synthetic methodology for fabricating SCLCPs that are promising materials for device applications.

     

Crystallization and Ring‐Banded Spherulite Morphology of Poly(ethylene oxide)‐block‐Poly(ε‐caprolactone) Diblock Copolymer

Summary: The crystallization behavior of crystalline‐crystalline diblock copolymer containing poly(ethylene oxide) (PEO) and poly(ε‐caprolactone) (PCL), in which the weight fraction of PCL is 0.815, has been studied via differential scanning calorimeter (DSC), wide‐angle X‐ray diffraction (WAXD), and polarized optical microscopy (POM). DSC and WAXD indicated that both PEO and PCL blocks crystallize in the block copolymer. POM revealed a ring‐banded spherulite morphology for the PEO‐b‐PCL diblock copolymer.

DSC heating curve for the PEO‐b‐PCL block copolymer.     

Formation of Thermoresponsive Gold Nanoparticle/PNIPAAm Hybrids by Surface‐Initiated,Atom Transfer Radical Polymerization in Aqueous Media

Summary: We investigated the formation of thermoresponsive gold nanoparticle/poly(N‐isopropylacrylamide) (AuNP/PNIPAAm) core/shell hybrid structures by surface‐initiated, atom transfer radical polymerization (SI‐ATRP) in aqueous media and the effect of cross‐linking on the thermoresponsiveness of the AuNP/PNIPAAm hybrids. The disulfide containing an ATRP initiator was attached onto AuNPs and the monomer, NIPAAm, was polymerized from the surface of AuNPs in the absence or presence of a cross‐linker, ethylene diacrylate, in aqueous media at room temperature. The resulting brush‐type and cross‐linked AuNP/PNIPAAm hybrids were characterized by Fourier‐transform infrared spectroscopy, transmission electron microscopy, and variable temperature dynamic light scattering.

     

Atom Transfer Radical Polymerization and Third‐Order Nonlinear Optical Properties of New Azobenzene‐Containing Side‐Chain Polymers

The atom transfer radical polymerization (ATRP) technique has been successfully applied to synthesize a series of nonlinear optically (NLO) active homopolymers, 4‐(4‐nitrophenyl‐diazenyl) phenyl acrylate ( P ‐ NPAPA ) and 4‐(4‐methoxyphenyl‐diazenyl) phenyl acrylate ( P ‐ MPAPA ), containing azobenzene groups on the side chain. The third‐order NLO properties of the polymer films were measured by the degenerated four‐wave mixing (DFWM) technique. A dependence of the χ⁽³⁾ values and response times of polymers on their number‐average molecular weight and the electronic effect of the substituent (nitro‐ or methoxy‐) on the azobenzene group have been evidenced. The increasing χ⁽³⁾ value of the polymer films at the magnitude of about 10^?10 was displayed with increasing molecular weight and the presence of the push‐pull electronic system contributes much in enhancing the third‐order NLO susceptibility of polymers.

     

Synthesis of Hydroxyl‐Terminated Poly(vinylcarbazole‐ran‐styrene) Copolymers by Nitroxide‐Mediated Polymerization

A series of poly(vinylcarbazole‐ran‐styrene) copolymers with terminal hydroxyl groups were synthesized using nitroxide mediated polymerization (NMP) with the hydroxyl‐functional initiator VA‐086 and TEMPO as the mediator at 130 °C. Polymerizations were studied as a function of vinylcarbazole feed content, target molecular weight, and VA‐086/TEMPO ratio. The characterization of the copolymers was done by GPC and NMR. For feed concentrations of 40 mol‐% vinylcarbazole, copolymers with vinylcarbazole concentration up to 33 mol‐% could be obtained with narrow molecular weight distributions (PDI = 1.35) and exhibit pseudo‐“living” character up to conversions of about 20% if the target molecular weight was >100 kg · mol^?1. ¹H NMR indicated that the hydroxyl group was retained sufficiently with a functionality typically of about 0.7 hydroxyl groups per chain. Copolymers synthesized with higher vinylcarbazole feed content exhibited slower kinetics and were less controlled, resulting in much broader molecular weight distributions. The absence of control could be attributed to the absence of thermal initiation by vinylcarbazole which is advantageous toward controlling the radical concentration during the polymerization.

     

Hydrolytic and Thermal Degradation of Random Copolyesters of ε‐Caprolactone and 2‐Oxepane‐1,5‐dione

The hydrolytic and thermal stability of random copolyesters of ε‐caprolactone (ε‐CL) and ca. 30 mol‐% 2‐oxepane‐1,5‐dione (OPD) have been investigated. Compared with poly(ε‐caprolactone) (PCL) of a comparable molecular weight, the hydrolytic degradation of the copolyester is faster in a phosphate buffer (pH = 7.4) at 37 °C as confirmed by the time dependence of water absorption, weight loss, melting temperature, and molecular weight. This difference is a result of the higher hydrophilicity imparted to the copolyester by the ketone of the OPD units. The thermal degradation has been studied by thermogravimetric analysis (TGA), ¹H NMR spectroscopy, and size exclusion chromatography (SEC). The activation energy of the thermal degradation under nitrogen has been found to be lower for the copolyesters than for PCL, which indicates that the OPD co‐units have a deleterious effect on the thermal stability of PCL. The thermal degradation primarily occurs by pyrolysis of the ester functions.

Pyrolysis of the ester function of the ε‐CL/OPD diad.     

Double‐Gyroid Morphology of a Polystyrene‐block‐Poly(ferrocenylethylmethylsilane) Diblock Copolymer: A Route to Ordered Bicontinuous Nanoscale Architectures

A polystyrene‐block‐poly(ferrocenylethylmethylsilane) diblock copolymer, displaying a double‐gyroid morphology when self‐assembled in the solid state, has been prepared with a PFEMS volume fraction ?_PFEMS = 0.39 and a total molecular weight of 64 000 Da by sequential living anionic polymerisation. A block copolymer with a metal‐containing block with iron and silicon in the main chain was selected due to its plasma etch resistance compared to the organic block. Self‐assembly of the diblock copolymer in the bulk showed a stable, double‐gyroid morphology as characterised by TEM. SAXS confirmed that the structure belonged to the Ia d space group.

     

Nitroxide‐Mediated Radical Polymerization of N‐tert‐Butylacrylamide

The nitroxide‐mediated polymerization of N‐tert‐butylacrylamide (TBAM) in DMF at 120 °C using SG1/DEPN and AIBN has been investigated. Linear growth in number‐average molecular weight ( ) versus conversion and narrow molecular weight distributions (MWDs) with high livingness were obtained up to ≈8 000 g · mol^?1. For higher molecular weights, the MWDs gradually became broader with low molecular weight tailing, and deviated downwards from theoretical values. Quantitative analyses of MWDs, along with specifically designed conventional radical polymerizations at 120 °C, were consistent with chain transfer to monomer limiting the attainable . This finding can be equally applied to existing literature polymerizations of TBAM.

     

A Facile One‐Pot Synthesis to Dextran‐Based Nanoparticles with Carboxy Functional Groups

Summary: Stabilized nanoparticles functionalized with carboxy groups were synthesized directly from dextran and acrylic acid (AA), without using any organic solvent and surfactant. The composition and morphology of these dextran‐based nanoparticles, as well as the mechanism of this one‐pot synthesis, were also investigated in this paper. This approach is anticipated to be applicable to various water‐soluble polysaccharides to fabricate nanoparticles facilely.

Facile synthesis of stabilized nanoparticles functionalized with carboxy groups from dextran and AA.     

Pseudo‐Living Anionic Telomerization of Buta‐1,3‐diene

Low‐molecular‐weight liquid polybutadienes (1 000–2 000 g · mol^?1) consisting of 60 mol‐% poly(buta‐1,2‐diene) repeating units were synthesized via anionic telomerization. Maintaining the initiation and reaction temperature at less than 70 °C minimized chain transfer and enabled the polymerization to occur in a living fashion, which resulted in well‐controlled molecular weights and narrow polydispersity indices. MALDI‐TOF mass spectrometry confirmed that the end groups of liquid polybutadienes synthesized via anionic telomerization contained one benzyl end and one protonated end. In comparison, the end groups of liquid polybutadienes synthesized via living anionic polymerization contained one sec‐butyl or butyl end and one protonated end.