首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
Background  Nonuniform attenuation artifacts may reduce the diagnostic accuracy of cardiac single photon emission computed tomography (SPECT) studies. Compensation strategies using an attenuation map (eg, from x-ray tomography) have been reported to improve accuracy. Because the computed tomography (CT) and SPECT images are obtained sequentially, misregistration of the emission and transmission scans can occur. Our objective was to qualitatively assess these misregistration errors. Methods and Results  This study included 60 patients who consecutively underwent CT attenuation-corrected myocardial perfusion studies acquired on a SPECT/CT system equipped with a nondiagnostic CT scanner. The cardiac SPECT/CT and fused images were reviewed and qualitatively assessed for misregistration of the heart between the CT and emission image data sets. The degree of misregistration was qualitatively rated on a 5-point scale. Misregistration was judged to be none in 4 of 55 patients, minimal in 9, mild in 19, moderate in 21, and severe in 2 patients. Five studies could not be assessed because of severe artifacts on CT. Conclusions  Forty-two percent of the CT attenuation-corrected myocardial perfusion studies had moderate to severe cardiac misregistration qualitatively. Our data suggest that careful review of attenuation correction maps and registration is needed to avoid reconstruction artifacts due to misregistration. Preliminary results of this study were presented at the 2005 Society of Nuclear Medicine Annual Meeting, Seattle, Wash, September 29–October 2, 2005.  相似文献   

3.
PURPOSE: One of the main factors contributing to the accuracy of attenuation correction for SPECT imaging using transmission computed tomography (TCT) with an external gamma-ray source is the radionuclide count. To reduce deterioration of TCT images due to inadequate radionuclide counts, a correction method, segmented attenuation correction (SAC), in which TCT data are transformed into several components (segments) such as water, lungs and spine, providing a satisfactory attenuation correction map with less counts, has been developed. The purpose of this study was to examine the usefulness of SAC for myocardial SPECT with attenuation correction. METHODS: A myocardial phantom filled with Tc-99m was scanned with a triple headed SPECT system, equipped with one cardiac fan beam collimator for TCT and two parallel hole collimators for ECT. As an external gamma-ray source for TCT, 740 MBq of Tc-99m was also used. Since Tc-99m was also used for ECT, the TCT and ECT data were acquired separately. To make radionuclide counts, the TCT data were acquired in the sequential repetition mode, in which a 3-min-rotation was repeated 7 times followed by a 10-min-rotation 4 times (a total of 61 minutes). The TCT data were reconstructed by adding some of these rotations to make TCT maps with various radionuclide counts. Three types of SAC were used: (a) 1-segment SAC in which the body structure was regarded as water, (b) 2-segment SAC, in which the body structure was regarded as water and lungs, and (c) 3-segment SAC, in which the body structure was regarded as water, lungs and spine. We compared corrected images obtained with non-segmentation methods, and with 1- to 3-segment SACs. We also investigated the influence of radionuclide counts of TCT (3, 6, 9, 12, 15, 18, 21, 31, 41, 51, 61 min acquisition) on the accuracy of the attenuation correction. RESULTS: Either 1-segment or 2-segment SAC was sufficient to correct the attenuation. When non-segmentation TCT attenuation methods were used, rotations of at least 31 minutes were required to obtain sufficiently large counts for TCT. When the 3-segment SAC was used, the minimal acquisition time for a satisfactory TCT map was 7 min. CONCLUSION: The 3-segment SAC was effective for attenuation correction, requiring fewer counts (about 1/5 of the value for non-segmentation TCT), or less radiation for TCT.  相似文献   

4.
Objective  Segmentation with scatter and photopeak window data using attenuation correction (SSPAC) method can provide a patient-specific non-uniform attenuation coefficient map only by using photopeak and scatter images without X-ray computed tomography (CT). The purpose of this study is to evaluate the performance of attenuation correction (AC) by the SSPAC method on normal myocardial perfusion database. Methods  A total of 32 sets of exercise–rest myocardial images with Tc-99 m-sestamibi were acquired in both photopeak (140 keV ± 10%) and scatter (7% of lower side of the photopeak window) energy windows. Myocardial perfusion databases by the SSPAC method and non-AC (NC) were created from 15 female and 17 male subjects with low likelihood of cardiac disease using quantitative perfusion SPECT software. Segmental myocardial counts of a 17-segment model from these databases were compared on the basis of paired t test. Results  AC average myocardial perfusion count was significantly higher than that in NC in the septal and inferior regions (P < 0.02). On the contrary, AC average count was significantly lower in the anterolateral and apical regions (P < 0.01). Coefficient variation of the AC count in the mid, apical and apex regions was lower than that of NC. Conclusions  The SSPAC method can improve average myocardial perfusion uptake in the septal and inferior regions and provide uniform distribution of myocardial perfusion. The SSPAC method could be a practical method of attenuation correction without X-ray CT.  相似文献   

5.
Combined acquisition of transmission and emission data in single-photon emission computed tomography (SPECT) can be used for correction of non-uniform photon attenuation. However, down-scatter from a higher energy isotope (e.g. 99mTc) contaminates lower energy transmission data (e.g. 153Gd, 100 keV), resulting in underestimation of reconstructed attenuation coefficients. Window-based corrections are often not very accurate and increase noise in attenuation maps. We have developed a new correction scheme. It uses accurate scatter modelling to avoid noise amplification and does not require additional energy windows. The correction works as follows: Initially, an approximate attenuation map is reconstructed using down-scatter contaminated transmission data (step 1). An emission map is reconstructed based on the contaminated attenuation map (step 2). Based on this approximate 99mTc reconstruction and attenuation map, down-scatter in the 153Gd window is simulated using accelerated Monte Carlo simulation (step 3). This down-scatter estimate is used during reconstruction of a corrected attenuation map (step 4). Based on the corrected attenuation map, an improved 99mTc image is reconstructed (step 5). Steps 3–5 are repeated to incrementally improve the down-scatter estimate. The Monte Carlo simulator provides accurate down-scatter estimation with significantly less noise than down-scatter estimates acquired in an additional window. Errors in the reconstructed attenuation coefficients are reduced from ca. 40% to less than 5%. Furthermore, artefacts in 99mTc emission reconstructions are almost completely removed. These results are better than for window-based correction, both in simulation experiments and in physical phantom experiments. Monte Carlo down-scatter simulation in concert with statistical reconstruction provides accurate down-scatter correction of attenuation maps.An erratum to this article can be found at  相似文献   

6.
PURPOSE: In clinical routine, attenuation correction (AC) using X-ray CT is a relatively new method for reducing attenuation artefacts. We evaluated the quality of attenuation maps generated with very low tube current to minimise exposure due to transmission scanning. METHODS: SPECT/CT acquisitions were performed with a Millenium VG3 gamma camera with the Hawkeye CT device (GE Medical Systems). In phantom studies, determination of linear absorption coefficients (mu) for air, water and Teflon was carried out. The attenuation maps in both stress and resting studies from 62 patients (21 females and 41 males, age 63.7 +/- 11.0 years, BMI 30.0 +/- 5.7 kg/m(2)) were compared. All patients underwent exercise or pharmacologic stress testing and a resting study for comparison using Tc-99m MIBI or Tc-99m Tetrofosmin. AC in stress studies was performed using 2.5 mA tube current (set as default), whereas 1.0 mA was used in resting studies. RESULTS: In both phantom and patient studies, differences of linear absorption coefficients were not significant (p > 0.05). Effective dose decreased from 0.90 mSv down to 0.36 mSv, respectively. CONCLUSION: Our results indicate that reliable attenuation maps (mu-maps) of the thorax can be obtained even with the use of very low tube current. In our study, radiation exposure in CT-based AC for myocardial perfusion SPECT was substantially lowered (60% reduction). This is of particular importance in high-risk patients who may have to undergo follow-up scans and in research studies on volunteers. The procedure introduced is relatively simple and can be transferred to other SPECT/CT devices, which allow adjustment of tube current.  相似文献   

7.
Background  Rest thallium-201/stress technetium 99m sestamibi protocol is widely used in the clinical setting. Although attenuation correction (AC) represents an important recent development in cardiac single photon emission computed tomography (SPECT) imaging, adjacent extracardiac activity can affect the myocardial count density distribution on AC images, particularly with 201Tl. The aims of this study were to compare normal distribution between AC rest 201Tl and stress 99mTc-sestamibi SPECT images as well as to evaluate the effect of extracardiac activity on AC SPECT images with 99mTc and 201Tl. Methods and Results  A phantom measurement and a study of 21 patients with low likelihood of coronary artery disease were performed with a triple-head SPECT system equipped with a americium 241 line source. In the phantom study, the presence of extracardiac activity increased the inferior-to-anterior ratios, particularly with 201Tl (1.01 to 1.32). In the clinical data, reduced count density with 201Tl compared to 99mTc-sestamibi was observed in most of the noninferior segments. On an individual segment basis, 37 (20%) of 189 segments from 11 (52%) of 21 subjects showed reduced count density on the 201Tl image compared to 99mTc-sestamibi by >10% of peak activity. Conclusions  There is a significant difference in myocardial count density distribution between 99mTc-sestamibi and 201Tl on AC SPECT images, indicating that a careful image interpretation that considers the different normal count density distribution between the tracers and/or a tracer specific normal database is necessary, especially when defect reversibility is of concern. Further work should aim for the incorporation of scatter correction combined with attenuation correction. Supported by Mitsubishi Research Institute, Japan.  相似文献   

8.
BACKGROUND: Attenuation artifact remains a substantial limitation to confident interpretation of images and reduces laboratory efficiency by requiring comparison of stress and rest image sets. Attenuation-corrected stress-only imaging has the potential to ameliorate these limitations. METHODS AND RESULTS: Ten experienced nuclear cardiologists independently interpreted 90 stress-only electrocardiography (ECG)-gated technetium 99m sestamibi images in a sequential fashion: myocardial perfusion imaging (MPI) alone, MPI plus ECG-gated data, and attenuation-corrected MPI with ECG-gated data. Images were interpreted for diagnostic certainty (normal, probably normal, equivocal, probably abnormal, abnormal, and perceived need for rest imaging). With stress MPI data alone, only 37% of studies were interpreted as definitely normal or abnormal, with a very high perceived need for rest imaging (77%). The addition of gated data did not alter the interpretations. However, attenuation-corrected data significantly increased the number of studies characterized as definitely normal or abnormal (84%, P <.005) and significantly reduced the perceived need for rest imaging (43%, P <.005). These results were confirmed by use of a nonsequential consensus interpretation of three readers. CONCLUSION: Attenuation correction applied to studies with stress-only Tc-99m ECG-gated single photon emission computed tomography images significantly increases the ability to interpret studies as definitely normal or abnormal and reduces the need for rest imaging. These findings may improve laboratory efficiency and diagnostic accuracy.  相似文献   

9.
PURPOSE: This study evaluates not only the clinical usefulness but also the problems in attenuation correction for thallium-201 (Tl-201) myocardial SPECT by means of simultaneous transmission and emission data acquisition in the detection of coronary artery disease (CAD). METHODS: A three-detector SPECT system equipped with a Tc-99m line source and fan-beam collimators was used for simultaneous transmission and emission data acquisition for Tl-201 myocardial SPECT in 73 patients (18 patients for normal database and 55 patients for the evaluation of diagnostic accuracy). Attenuation-corrected (AC) images and non-attenuation-corrected (NC) images were reconstructed with an iterative maximum-likelihood estimation-corrected (ML-EM) algorithm. Both sets of images were reoriented into the short axis. Normal database polar maps were constructed from the AC and NC images for quantitative analysis. RESULTS: There was a significant difference in specificity between NC and AC images in the RCA territory and those in specificity and accuracy in the LCX territory. There was no significant difference in sensitivity found between NC and AC images in either territory, but sensitivity in both territories tended to decrease with attenuation correction. In the LAD territory, there were various changes in sensitivity and specificity observed with attenuation correction in cases with each quantitative criterion. CONCLUSIONS: Diagnostic performance of significant stenosis in the RCA and LCX territories quantitatively improved with attenuation correction because of an increase in specificity, but no significant improvement in diagnostic performance was obtained in the LAD territory with attenuation correction. We recommend combined interpretation of AC and NC images and careful evaluation of any SPECT image by means of transmission computed tomography.  相似文献   

10.
BACKGROUND: Myocardial perfusion imaging has demonstrated a limited sensitivity as a means of accurately identifying left main (LM) coronary disease. Because regional quantitative perfusion biases are eliminated with attenuation corrected (AC) single photon emission computed tomography (SPECT), as compared with uncorrected (NC) SPECT, we hypothesized that AC SPECT would demonstrate increased diagnostic accuracy for the detection of significant LM coronary stenosis. METHODS AND RESULTS: We studied 28 patients (23 men, 5 women; mean age, 66+/-9 years) with significant LM stenoses (> or =50%) and 34 control patients (27 men, 7 women; mean age, 65+/-11 years) with 2-vessel coronary disease. Rest thallium-201 and stress technetium 99m sestamibi SPECT imaging with and without AC were performed, as described earlier. Both AC and NC images were analyzed visually and quantitatively in comparison with corresponding normal databases. A greater sensitivity for detection of an LM defect pattern (64% vs. 7%, P = .0009) with equivalent specificity (94% vs. 100%, P = not significant) was demonstrated by means of visual analysis of AC SPECT images. More disease was demonstrated in a greater number of territories with AC SPECT images than with NC images (2.14+/-0.97 for AC images vs. 1.43+/-0.84 for NC images, P = .0001). Similar improvement in the detection of LM disease was shown by means of automated quantitative analysis (57% for AC SPECT vs 14% for NC SPECT, P = .0005), again with no loss in specificity. CONCLUSIONS: AC SPECT with the University of Michigan method in consecutive patients with LM stenoses and a select control population with severity matched multivessel coronary disease significantly improved the diagnostic accuracy of myocardial perfusion imaging for the identification of LM coronary disease, compared with uncorrected SPECT.  相似文献   

11.
Background  We aimed to compare normal limits and the detection of coronary artery disease (CAD) with attenuation-corrected (AC) and non-attenuation-corrected (NC) myocardial perfusion single photon emission computed tomography (MPS) by use of a recently improved automated quantification technique. Methods and Results  We acquired 415 rest/stress technetium 99m MPS studies on a Vertex dual-detector camera with a gadolinium 153 line source (Vantage Pro). Gender-specific NC, AC, and gender-combined AC normal limits were created from rest/stress images of 50 women and 50 men with a low likelihood of CAD (<5%) and a median body mass index (BMI) of 30 kg/m2 in each gender group. BMI-specific normal limits (<30 kg/m2 and >30 kg/m2) were also compared. Total perfusion deficit and 17-segment summed scores in 174 patients were compared with angiography, and normalcy rates were established from 141 studies of low-likelihood patients. There were no differences between low-BMI and high-BMI normal limits for AC or NC studies. Male and female normal limits differed in 12 of 17 segments for NC stress studies and in 3 of 17 segments for AC stress studies (P < .01). The sensitivity, specificity, and normalcy rates for stenoses with 70% narrowing or greater were 89%, 73%, and 91%, respectively, for NC studies and 87%, 80%, and 95%, respectively, for AC studies (P = not significant). Conclusion  Automated detection of CAD by AC and NC MPS demonstrated similar sensitivity, specificity, and normalcy rates. Some gender differences were noted for AC normal limits.  相似文献   

12.
BACKGROUND: The aim of this study was to evaluate the value of attenuation correction of technetium 99m tetrofosmin single photon emission computed tomography (SPECT) imaging for the detection of myocardial viability. METHODS AND RESULTS: A head-to-head comparison between resting Tc-99m tetrofosmin SPECT and fluorine 18 fluorodeoxyglucose (FDG) SPECT was performed. Both the noncorrected and attenuation-corrected Tc-99m tetrofosmin SPECT images were compared with the FDG images that served as the reference for viability. Consecutive patients (n = 33) with chronic coronary artery disease and left ventricular dysfunction were included. Segmental Tc-99m tetrofosmin and FDG data were displayed in polar maps (17-segment model), and the segments were normalized to peak activity by use of the 4D-MSPECT software program. Segments with normalized FDG activity greater than 50% were considered viable. A similar cutoff value to assess viability was used for the noncorrected and attenuation-corrected Tc-99m tetrofosmin images. Regional contractile function was determined from the gated Tc-99m tetrofosmin images and scored as normokinesia, hypokinesia, or akinesia/dyskinesia. Of all segments, 482 (85%) were viable on FDG SPECT. Of these, 427 (89%) were classified as viable with noncorrected Tc-99m tetrofosmin. Thus 55 (11%) were underestimated with noncorrected Tc-99m tetrofosmin SPECT; these segments were mainly located in the inferior and inferoseptal regions. Attenuation correction changed the classification of 39 (70%) of the underestimated segments to viable. By use of attenuation correction, the agreement between Tc-99m tetrofosmin and FDG imaging improved from 84% to 90%. Similar observations were made when the analysis was restricted to the dysfunctional segments. CONCLUSION: The addition of attenuation correction to Tc-99m tetrofosmin SPECT significantly improved detection of myocardial viability in patients with chronic coronary artery disease, although minimal underestimation of viability remained as compared with FDG SPECT imaging.  相似文献   

13.
For transmission computed tomography (TCT) systems using a centered transmission source with a fan-beam collimator, the transmission projection data are truncated. To achieve sufficiently large imaging field of view (FOV), we have designed the combination of an asymmetric fan-beam (AsF) collimator and a small uncollimated sheet-source for TCT, and implemented AsF sampling on a two-head SPECT system. The purpose of this study is to evaluate the feasibility of our TCT method for quantitative emission computed tomography (ECT) in clinical application. Sequential Tc-99m transmission and Tl-201 emission data acquisition were performed in a cardiac phantom (30 cm in width) with a myocardial chamber and a patient study. Tc-99m of 185 MBq was used as the transmission source. Both the ECT and TCT images were reconstructed with the filtered back-projection method after scatter correction with the triple energy window (TEW) method. The attenuation corrected transaxial images were iteratively reconstructed with the Chang algorithm utilizing the attenuation coefficient map computed from the TCT data. In this AsF sampling geometry, an imaging FOV of 50 cm was yielded. The attenuated regions appeared normal on the scatter and attenuation corrected (SAC) images in the phantom and patient study. The good quantitative accuracy on the SAC images was also confirmed by the measurement of the Tl-201 radioactivity in the myocardial chamber in the phantom study. The AsF collimation geometry that we have proposed in this study makes it easy to realize TCT data acquisition on the two-head SPECT system and to perform quantification on Tl-201 myocardial SPECT.  相似文献   

14.
Background  Nonuniform attenuation in the thorax can generate artifacts in single-photon emission computed tomographic myocardial perfusion studies that mimic coronary artery disease. In this article we present both phantom and simulation data, as well as clinical data, in support of an emission-based method that provides reliable correction for attenuation effects without the need for a transmission measurement. Methods and Results  The attenuation map is derived from the measured distribution of 99mTc-labeled macroaggregated albumin in the lungs and a radioactive binder wrapped about the thorax. This information is acquired as part of a dual-isotope acquisition during the rest 201TI study. Segmentation is used to define the interiors of lung and body compartments, which are assigned a single attenuation coefficient for each of the two tissue types. The appropriateness of this approach was investigated by examining the measured attenuation coefficients in a group of 80 individuals (40 male, 40 female) from positron emission tomographic transmission studies. The correction technique was evaluated with computer simulations, a physical phantom, and clinical data acquired from 20 patients. Analysis of the positron emission tomographic data found a small SD in the mean attenuation coefficients for the body (<5%) and lungs (<15%). The application of emission-based attenuation-correction technique produced a substantial reduction in the magnitude of the attenuation artifact in images obtained from both the phantom and the simulation studies. The emission-based attenuation-correction technique was easily applied to myocardial perfusion studies, where it had a significant effect, resulting in changes in interpretation for nine of 20 patients. Conclusions  The results of this study provide strong support for the concept that an attenuation map can be generated with fixed attenuation values in place of those that are directly measured. Thus the emission-based attenuation-correction technique can be considered an inexpensive alternative to transmission-based correction methods. Because the emission-based correction technique does not require any additional hardware, it has the major advantage of being applicable to all single-photon emission computed tomographic systems.  相似文献   

15.
Background  The superposition of the diaphragm and abdominal structures on the inferior wall of the left ventricle has often distorted single photon emission computed tomography (SPECT). We developed a respiratory gated SPECT (RGS) system to diminish artifacts caused by overlap between the inferior wall and upper abdomen and have validated its feasibility for clinical use. Methods and Results  A 2-detector SPECT system equipped with a respiratory monitor based on impedance plethysmography and an original triggering apparatus was used for RGS in 7 healthy male volunteers. A pulse triggered 100 ms after every expiratory peak was processed in a SPECT system as well as an electrocardiogram (ECG) gating pulse. Inspiratory and expiratory frames were determined using the respiratory curve derived from fluctuation of the gall bladder uptake. Both sets of images were reoriented into short-axis and vertical long-axis slices. For quantification, data were reconstructed into polar plots and count density estimated in 9 myocardial segments. The mean percentage uptake of inferior segments at inspiration was significantly greater than that at expiration (81±8.3 versus 76±7.1; P<.0001). The inferior-lateral activity ratio improved from 0.78 at expiration to 0.81 at inspiration (P<.01). The coefficient of variance for each segment of inspiratory data was significantly smaller than that at expiration, indicating improved homogeneity of tracer distribution. The lowest cutoff threshold of the tomograms to separate the inferior uptake from that of the upper abdomen was significantly lower at inspiration than at expiration, suggesting smaller scatter from abdominal structures on inspiratory images. Conclusions  RGS yielded improved tracer uptake of the inferior wall in healthy male subjects and may be suitable as an alternative method for attenuation and scatter correction. However, further clinical validation is needed.  相似文献   

16.
BACKGROUND: Subdiaphragmatic activity and diaphragmatic motion both contribute to inferior wall artifacts in technetium 99m myocardial perfusion single photon emission computed tomography (SPECT). METHODS AND RESULTS: We used an anthropomorphic phantom with ventricular wall activity, liver/spleen inserts containing variable Tc-99m activity, and variable vertical (diaphragmatic) motion amplitude. SPECT and transmission scans were obtained on a GE Optima NX camera. Data were processed by use of filtered backprojection or attenuation correction (AC). Resulting myocardial activity maps were analyzed with standardized inferior-anterior and anterior-lateral wall ratios. At a subdiaphragmatic-myocardial activity ratio of 0.5:1, inferior wall attenuation predominates, producing a cold artifact. AC corrects inferior wall activity to the level of the anterior wall irrespective of diaphragmatic motion. At a subdiaphragmatic-myocardial activity ratio of 1:1, inferior wall counts vary widely depending on the proximity of subdiaphragmatic activity to the ventricle. With increasing diaphragmatic amplitude, the overlap of subdiaphragmatic activity and inferior wall worsens, leading to a complex mixture of cold and hot artifacts, not corrected by AC. CONCLUSIONS: Concentration and proximity of subdiaphragmatic Tc-99m activity relative to myocardium comprise a major factor in the nature and severity of inferior wall artifacts. If the subdiaphragmatic Tc-99m concentration is equivalent to that in the myocardium, complex, potentially uninterpretable hot and cold inferior wall artifacts are produced.  相似文献   

17.
Background  To define the physical and clinical reproducibility of 201Tl myocardial perfusion SPECT (MPS), this study assesses the variation between two repeated rest 201Tl MPS with repositioning only, with a two-hour time interval and with phantom measurements as a reference. Methods  Three anthropomorphic thorax phantoms were filled with 201Tl. For each phantom five repeated 201Tl MPS were obtained. In addition, in 20 patients repeated 201Tl rest-MPS and in 26 patients early and delayed 201Tl rest-MPS were performed. Quantitative analysis was done using MunichHeart. Statistical methods were used to calculate variability. Visual analysis was performed by 2 independent observers. Results  The average variation between repeated phantom MPS was 0.5% (95% confidence interval (CI): −0.4% to 1.4%). For patient scans this was −5.0% (95% CI: −2.5% to −7.5%) and between early and delayed 201Tl MPS −15.5% (95% CI: −11.7% to −19.3%). Visual assessment revealed no clinical significant differences between rest 201Tl and repeated or delayed 201Tl MPS. Conclusions  Repositioning in phantom 201Tl MPS does not cause significant variation. Repeated 201Tl MPS in patients shows 5.0% decrease of 201Tl in 30 minutes, which increases to 15% during a two-hour time interval without quantitative or visual regional differences. This decrease indicates a time-related washout of 201Tl, but does not change clinical diagnosis.  相似文献   

18.
Background  Current guidelines of Food and Drug Administration for the evaluation of SPECT myocardial perfusion imaging (MPI) in clinical trials recommend independent visual interpretation by multiple experts. Few studies have addressed whether quantitative SPECT MPI assessment would be more reproducible for this application. Methods and Results  We studied 31 patients (age 68 ± 13, 25 male) with abnormal stress MPI who underwent repeat exercise (n = 11) or adenosine (n = 20) MPI within 9-22 months (mean 14.9 ± 3.8 months) and had no interval revascularization or myocardial infarction and no change in symptoms, stress type, rest or stress ECG, or clinical response to stress on the second study. Visual interpretation per FDA Guidance used 17-segment, 5-point scoring by two independent expert readers with overread of discordance by a third expert, and percent myocardium abnormal was derived from normalized summed scores. The quantitative magnitude of perfusion abnormality was assessed by the total perfusion deficit (TPD), expressing stress, rest, and ischemic perfusion abnormality. High linear correlations were observed between visual and quantitative size of stress, rest, and ischemic defects (R = 0.94, 0.92, 0.84). Correlations of two tests were higher by quantitative than by visual methods for stress (R = 0.97 vs R = 0.91, P = 0.03) and rest defects (R = 0.94 vs R = 0.82, P = 0.03), respectively, and statistically similar for ischemic defects (R = 0.84 vs R = 0.70, P = ns). Conclusions  In stable patients having serial SPECT MPI, quantification is more reproducible than visual for magnitude of perfusion abnormality, suggesting its superiority for use in randomized clinical trials and monitoring the effects of therapy in an individual patient. See related editorial, doi: This study was presented in part at the Society of Nuclear Medicine 55th Annual Meeting, New Orleans, Louisiana, June 14-18, 2008.  相似文献   

19.
Background  Marked partial volume effects occur in myocardial single photon emission computed tomographic (SPECT) studies because of limited resolution in imaging the myocardial wall and contractile motion of the heart. Little work has been undertaken to develop correction techniques for SPECT except for efforts to improve the reconstructed resolution. Our purpose was to examine the extent of the problem and propose a correction method. Methods and Results  A potential correction method, developed initially for positron emission tomography, involved estimation of extravascular density by means of subtracting vascular density derived in a blood pool study from total density derived from a transmission study. Provided partial volume errors are the same for transmission and emission data, activity per gram of extravascular tissue can be obtained by means of dividing the perfusion regional data by extravascular density for the same region. Simulations were designed to assess the importance of partial volume errors and the use of extravascular density to correct the errors. Recovery coefficients for the myocardium were estimated by means of simulation of the beating heart on the basis of published values for ventricular dimensions. Resolution for transmission with a scanning line source system was compared with emission resolution. The effect of spillover on measured partial volume losses was assessed, and a method for matching spillover for emission and extravascular density was demonstrated. Correction for partial volume effects was demonstrated for a phantom with variable wall thickness. Significant variation in recovery coefficient was demonstrated between posterior and septal walls for individual patients independent of heart size. Filtering was necessary to account for the difference in transmission resolution measured in the axial direction. Spillover effects has a significant influence on the measured recovery for small objects; however, for a specific reconstruction algorithm and defined region size, correction was implemented to match the spillover effects for emission and extravascular density. Use of extravascular density for correction of partial volume loss, for ordered subsets expectation maximization reconstruction with compensation for resolution, was demonstrated to be accurate to within 10%. Conclusions  The feasibility of correcting partial volume effects with extravascular density was demonstrated. Correction is effective provided care is taken to match both resolution and spillover for emission and extravascular density. Supported in part by a grant from the National Health and Medical Research Council of Australia (NHMRC grant no 920036).  相似文献   

20.
In recent years, there has been much interest in the clinical application of attenuation compensation to myocardial perfusion single photon emission computed tomography (SPECT) with the promise that accurate quantitative images can be obtained to improve clinical diagnoses. The different attenuation compensation methods that are available create confusion and some misconceptions. Also, attenuation-compensated images reveal other image-degrading effects including collimator-detector blurring and scatter that are not apparent in uncompensated images. This article presents basic concepts of the major factors that degrade the quality and quantitative accuracy of myocardial perfusion SPECT images, and includes a discussion of the various image reconstruction and compensation methods and misconceptions and pitfalls in implementation. The differences between the various compensation methods and their performance are demonstrated. Particular emphasis is directed to an approach that promises to provide quantititve myocardial perfusion SPECT images by accurately compensating for the 3-dimensional (3-D) attenuation, collimator-detector response, and scatter effects. With advances in the computer hardware and optimized implementation techniques, quantitatively accurate and highquality myocardial perfusion SPECT images can be obtained in clinically acceptable processing time. Examples from simulation, phantom, and patient studies are used to demonstrate the various aspects of the investigation. We conclude that quantitative myocardial perfusion SPECT, which holds great promise to improve clinical diagnosis, is an achievable goal in the near future. Supported in part by the US Public Health Service grant No CA39463 of the Cancer Institute. The contents of this work are solely the responsibility of the authors  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号