Massively parallel sequencing of 17 commonly used forensic autosomal STRs and amelogenin with small amplicons

The next-generation sequencing (NGS) method has been utilized to analyze short tandem repeat (STR) markers, which are routinely used for human identification purposes in the forensic field. Some researchers have demonstrated the successful application of the NGS system to STR typing, suggesting that NGS technology may be an alternative or additional method to overcome limitations of capillary electrophoresis (CE)-based STR profiling. However, there has been no available multiplex PCR system that is optimized for NGS analysis of forensic STR markers. Thus, we constructed a multiplex PCR system for the NGS analysis of 18 markers (13CODIS STRs, D2S1338, D19S433, Penta D, Penta E and amelogenin) by designing amplicons in the size range of 77–210 base pairs. Then, PCR products were generated from two single-sources, mixed samples and artificially degraded DNA samples using a multiplex PCR system, and were prepared for sequencing on the MiSeq system through construction of a subsequent barcoded library. By performing NGS and analyzing the data, we confirmed that the resultant STR genotypes were consistent with those of CE-based typing. Moreover, sequence variations were detected in targeted STR regions. Through the use of small-sized amplicons, the developed multiplex PCR system enables researchers to obtain successful STR profiles even from artificially degraded DNA as well as STR loci which are analyzed with large-sized amplicons in the CE-based commercial kits. In addition, successful profiles can be obtained from mixtures up to a 1:19 ratio. Consequently, the developed multiplex PCR system, which produces small size amplicons, can be successfully applied to STR NGS analysis of forensic casework samples such as mixtures and degraded DNA samples.     

Evaluation of the Illumina® Beta Version ForenSeq™ DNA Signature Prep Kit for use in genetic profiling

While capillary electrophoresis-based technologies have been the mainstay for human identity typing applications, there are limitations with this methodology’s resolution, scalability, and throughput. Massively parallel sequencing (MPS) offers the capability to multiplex multiple types of forensically-relevant markers and multiple samples together in one run all at an overall lower cost per nucleotide than traditional capillary electrophoresis-based methods; thus, addressing some of these limitations. MPS also is poised to expand forensic typing capabilities by providing new strategies for mixture deconvolution with the identification of intra-STR allele sequence variants and the potential to generate new types of investigative leads with an increase in the overall number and types of genetic markers being analyzed. The beta version of the Illumina ForenSeq DNA Signature Prep Kit is a MPS library preparation method with a streamlined workflow that allows for targeted amplification and sequencing of 63 STRs and 95 identity SNPs, with the option to include an additional 56 ancestry SNPs and 22 phenotypic SNPs depending on the primer mix chosen for amplification, on the MiSeq desktop sequencer (Illumina). This study was divided into a series of experiments that evaluated reliability, sensitivity of detection, mixture analysis, concordance, and the ability to analyze challenged samples. Genotype accuracy, depth of coverage, and allele balance were used as informative metrics for the quality of the data produced. The ForenSeq DNA Signature Prep Kit produced reliable, reproducible results and obtained full profiles with DNA input amounts of 1 ng. Data were found to be concordant with current capillary electrophoresis methods, and mixtures at a 1:19 ratio were resolved accurately. Data from the challenged samples showed concordant results with current DNA typing methods with markers in common and minimal allele drop out from the large number of markers typed on these samples. This set of experiments indicates the beta version of the ForenSeq DNA Signature Prep Kit is a valid tool for forensic DNA typing and warrants full validation studies of this MPS technology.     

A proof-of-principle study on implementing polymerase chain displacement reaction (PCDR) to improve forensic low-template DNA analysis

Polymerase chain reaction (PCR) plays an important role in forensic DNA analysis. However, the amplification of low-template DNA (LTDNA) samples usually encounters unsatisfactory results for the limited efficiency of PCR, which would interfere with the subsequent profile interpretation. Polymerase chain displacement reaction (PCDR) is a highly-efficient technique characterized by combining PCR and strand displacement reaction into a single PCDR cycle. This study explored the feasibility of PCDR for improving forensic LTDNA analysis. STR markers commonly used in forensic genetics were subjected to PCDR amplification and capillary electrophoresis detection. The results of singleplex reactions indicated that PCDR surpassed original PCR in efficiency for STR amplification. The average peak height of alleles in PCDR profiles was linearly correlated to the number of outer primers adopted for initiating the strand displacement process. Further, we assessed the multiplexing potential of PCDR by incorporating 17 STRs included in the expanded CODIS core loci and Amelogenin gene into a multiplex PCDR system. For pristine DNA templates ranged from 200 pg to 12.5 pg, the multiplex PCDR system consistently exhibited higher allele peak height as well as less allele dropout compared to the multiplex PCR references. Meanwhile, a significant reduction of stutter ratio was extensively observed in PCDR profiles. We also tested mock casework samples to verify the practical ability of multiplex PCDR for LTDNA detection. With DNA input varying from 48.1 pg to 6.6 pg, the multiplex PCDR system consistently obtained more allelic information than multiplex PCR methods. Our data collectively suggested that it is feasible to apply PCDR in forensic LTDNA analysis.     

Oral gram-positive bacterial DNA-based identification of saliva from highly degraded samples

Analyzing degraded evidence is an important challenge in forensic casework. Saliva remaining at a crime scene may deteriorate, due to various factors, making it difficult to identify. This study aims to clarify the efficacy of oral gram-positive and -negative bacterial DNA-based identification of saliva for analyzing highly degraded samples. Saliva samples were subjected to three different degradation treatments (heat denaturation: 40–80 °C in wet conditions; microbial decomposition: 1–5 days in humid soil; and ultraviolet (UV) irradiation: 0.01–1 J/cm²). We compared saliva markers’ detectability from the degraded samples—oral gram-positive bacterial DNA (Streptococcus salivarius and Streptococcus oralis), oral gram-negative bacterial DNA (Veillonella atypica and Prevotella maculosa) and salivary α-amylase. Oral bacterial DNA was detected using a melting curve analysis following real-time PCR. The efficacy of short tandem repeats (STR) and mitochondrial DNA (mtDNA) analyses were also compared. All oral bacterial DNA were detected with specific melting peaks from the heat-denatured samples, while neither catalytic nor immunochromatographic tests detected salivary α-amylase from the heat (80 °C) samples. The gram-positive bacterial DNA (S. salivarius and S. oralis) was detected from the microbial degradation (1–5 days) samples. In contrast, the gram-negative bacterial DNA (V. atypica and P. maculosa) and salivary α-amylase were not detected from samples treated for more than two days. UV exposure made bacterial DNA-based saliva identification difficult in a dose–dependent manner; however, UV irradiation did not influence protein-based saliva tests using salivary α-amylase as an indicator. As a result of STR and mtDNA typing, partial or null STR profiles were generated from the severely degraded (microbial (2–5 days) and UV (0.1–1 J/cm²) degradation) samples, but full mtDNA profiles were obtained from all degraded samples. The forensic applicability of bacterial DNA test evaluated, using mock case samples, indicates that the oral gram-positive bacterial DNA was more resistant to degradation than the other markers. We conclude that the oral gram-positive bacterial DNA-based examination could be useful for identifying saliva from severely environmentally-exposed forensic samples as well as mtDNA typing.     

Forensic species identification based on size variation of mitochondrial DNA hypervariable regions

In this study, two new systems for species identification were developed based on size variation of mitochondrial DNA hypervariable regions among animals: one was a conventional method using non-fluorescent primer sets and agarose gel electrophoresis and the other was an automatic method using fluorescent primer sets and capillary electrophoresis. DNA samples from 18 mammal, four birds, and 19 fish species were amplified using three primer sets specific for mammals, birds, and fishes, respectively. The differences in the sizes of the polymerase chain reaction (PCR) products, ranging from about 350 to 900 bp, permitted us to identify species. These systems were successfully applied to various specimens from several criminal cases. In unknown samples, which were different in size from reference DNA markers, sequencing of the PCR products and subsequent BLAST analysis helped to identify species. Furthermore, the sequence data provided us with information on individuals. Because these species identification methods are very simple, easy, rapid, and exact, they are useful in the field of forensic science. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Development of a multiplex forensic identity panel for massively parallel sequencing and its systematic optimization using design of experiments

The application of massively parallel sequencing (MPS) in forensic sciences enables high-resolution short tandem repeat (STR) genotyping for the characterization of biological evidence. While MPS supports multiplexing of a large number of forensic markers, the performance of an MPS-STR panel depends on good primer design and optimal PCR conditions. However, conventional strategies for multifactorial assay optimization are labor-intensive and do not necessarily allow the experimenter to identify optimum factor settings.Here we describe our new multiplex PCR assay, monSTR, which supports the simultaneous amplification of 21 forensic markers followed by targeted sequencing on the Illumina MiSeq. The selection of STR markers adapts on the expanded European Standard Set (ESS), including the highly polymorphic locus SE33, for compatibility with existing forensic DNA databases. Primer engineering involved bioinformatics tools to create a multiplex-compatible primer set. Primer quality was evaluated in silico and in vitro. We demonstrate the systematic optimization of multiplex PCR thermocycling conditions using Design of Experiments (DOE) methodology. The objective was to yield a specific, balanced, low-noise amplification of forensic targets. A central composite face design of experiments enabled an efficient simultaneous investigation of multiple critical process parameters and their interactions. Optimal multiplex PCR conditions were predicted using software-aided modelling based on DOE data. Verification experiments suggested a balanced, reproducible amplification of all markers with reduced formation of artefacts. Fully concordant STR profiles were obtained for the investigated reference samples even with challenging input DNA concentrations. We found that application of DOE principles enabled an experimentally practical and economically justifiable assay development and optimization, even beyond the field of forensic genetics.     

HIrisPlex-S system for eye,hair, and skin color prediction from DNA: Massively parallel sequencing solutions for two common forensically used platforms

Forensic DNA Phenotyping (FDP) provides the ability to predict externally visible characteristics from minute amounts of crime scene DNA, which can help find unknown perpetrators who are typically unidentifiable via conventional forensic DNA profiling. Fundamental human genetics research has led to a better understanding of the specific DNA variants responsible for physical appearance characteristics, particularly eye, hair, and skin color. Recently, we introduced the HIrisPlex-S system for the simultaneous prediction of eye, hair, and skin color based on 41 DNA variants generated from two forensically validated SNaPshot multiplex assays using capillary electrophoresis (CE). Here we introduce massively parallel sequencing (MPS) solutions for the HIrisPlex-S (HPS) system on two MPS platforms commonly used in forensics, Ion Torrent and MiSeq, that cover all 41 DNA variants in a single assay, respectively. Additionally, we present the forensic developmental validation of the two HPS-MPS assays. The Ion Torrent MPS assay, based on Ion AmpliSeq technology, illustrated the successful generation of full HIrisPlex-S genotypic profiles from 100 pg of input control DNA, while the MiSeq MPS assay based on an in-house design yielded complete profiles from 250 pg of input DNA. Assessing simulated forensic casework samples such as saliva, hair (bulb), blood, semen, and low quantity touch DNA, as well as artificially damaged DNA samples, concordance testing, and samples from numerous species, all illustrated the ability of both versions of the HIrisPlex-S MPS assay to produce results that motivate forensic applications. By also providing an integrated bioinformatics analysis pipeline, MPS data can now be analyzed and a file generated for upload to the publically accessible HIrisPlex online webtool (https://hirisplex.erasmusmc.nl). In addition, we updated the website to accept VCF input data for those with genome sequence data. We thus provide a user-friendly and semi-automated MPS workflow from DNA sample to individual eye, hair, and skin color prediction probabilities. Furthermore, we present a 2-person mixture separation tool that not only assesses genotype reliability with regards genotyping confidence but also provides the most fitting mixture scenario for both minor and major contributors, including profile separation. We envision this MPS implementation of the HIrisPlex-S system for eye, hair, and skin color prediction from DNA as a starting point for further expanding MPS-based forensic DNA phenotyping. This may include the future addition of SNPs predictive for more externally visible characteristics, as well as SNPs for bio-geographic ancestry inference, provided the statistical framework for DNA prediction of these traits is in place.     

Semi-quantitative PCR Analysis of DNA Degradation

Natural variables, including environmental conditions and post-mortem interval (PMI), affect the course of tissue decay in forensic and archaeological contexts. Compared with soft tissue, skeletal materials provide longer protection against DNA degradation. However environmental factors, including temperature and humidity, may affect the longevity of DNA survival in bone structure. In this study we describe the development of a semi-quantitative multiplex PCR based method to assess the level of DNA degradation with applications in analysis of forensic specimens. The assay was then applied to assess DNA survival in rib bone samples taken from 12 corpses in the mortuary. Samples were de-fleshed and stored in two different environmental conditions, including ambient conditions and underground burial from 103 to 445 days. Bone DNA was extracted and then assessed by the optimized semi-quantitative PCR and capillary electrophoresis of three products from the human mitochondrial DNA. The results show DNA survived for longer periods in samples stored in ambient conditions compared with underground burial conditions. There was no correlation found between the level of DNA degradation and PMI in our samples. Results also confirm that post-mortem alteration to DNA in skeletal tissues can occur very soon after death, with direct implications to the forensic industry.     

Forensic validation of the SNPforID 52-plex assay

The advantages of single nucleotide polymorphism (SNP) typing in forensic genetics are well known and include a wider choice of high-throughput typing platforms, lower mutation rates, and improved analysis of degraded samples. However, if SNPs are to become a realistic supplement to current short tandem repeat (STR) typing methods, they must be shown to successfully and reliably analyse the challenging samples commonly encountered in casework situations.The European SNPforID consortium, supported by the EU GROWTH programme, has developed a multiplex of 52 SNPs for forensic analysis, with the amplification of all 52 loci in a single reaction followed by two single base extension (SBE) reactions which are detected with capillary electrophoresis.In order to validate this assay, a variety of DNA extracts were chosen to represent problems such as low copy number and degradation that are commonly seen in forensic casework. A total of 40 extracts were used in the study, each of which was sent to two of the five participating laboratories for typing in duplicate or triplicate. Laboratories were instructed to carry out their analyses as if they were dealing with normal casework samples. Results were reported back to the coordinating laboratory and compared with those obtained from traditional STR typing of the same extracts using Powerplex^® 16 (Promega). These results indicate that, although the ability to successfully type good quality, low copy number extracts is lower, the 52-plex SNP assay performed better than STR typing on degraded samples, and also on samples that were both degraded and of limited quantity, suggesting that SNP analysis can provide advantages over STR analysis in forensically relevant circumstances. However, there were also additional problems arising from contamination and primer quality issues and these are discussed.     

An evaluation of the PowerSeq™ Auto System: A multiplex short tandem repeat marker kit compatible with massively parallel sequencing

Capillary electrophoresis (CE) and multiplex amplification with fluorescent tagging have been routinely used for STR typing in forensic genetics. However, CE-based methods restrict the number of markers that can be multiplexed simultaneously and cannot detect any intra-repeat variations within STRs. Several studies already have indicated that massively parallel sequencing (MPS) may be another potential technology for STR typing. In this study, the prototype PowerSeq™ Auto System (Promega) containing the 23 STR loci and amelogenin was evaluated using Illumina MiSeq. Results showed that single source complete profiles could be obtained using as little as 62 pg of input DNA. The reproducibility study showed that the profiles generated were consistent among multiple typing experiments for a given individual. The mixture study indicated that partial STR profiles of the minor contributor could be detected up to 19:1 mixture. The mock forensic casework study showed that full or partial profiles could be obtained from different types of single source and mixture samples. These studies indicate that the PowerSeq Auto System and the Illumina MiSeq can generate concordant results with current CE-based methods. In addition, MPS-based systems can facilitate mixture deconvolution with the detection of intra-repeat variations within length-based STR alleles.     

Applicability of the SNPforID 52-plex panel for human identification and ancestry evaluation in a Brazilian population sample by next-generation sequencing

SNP analysis is of paramount importance in forensic genetics. The development of new technologies in next-generation sequencing allowed processing a large number of markers in various samples simultaneously. Although SNPs are less informative than STRs, they present lower mutation rates and perform better when using degraded samples. Some SNP systems were developed for forensic usage, such as the SNPforID 52-plex, from the SNPforID Consortium, containing 52 bi-allelic SNPs for human identification. In this paper we evaluated the informativeness of this system in a Brazilian population sample (n = 340). DNA libraries were prepared using a customized HaloPlex Target Enrichment System kit (Agilent Technologies, Inc.) and sequenced in the MiSeq Personal Sequencer platform (Illumina Inc.). The methodology presented here allowed the analysis of 51 out of 52 SNPforID markers. Allele frequencies and forensic parameters were estimated, revealing high informativeness: the combined match probability and power of exclusion were 6.48 × 10⁻²¹ and 0.9997, respectively. Population admixture analysis indicates high European contribution (more than 70%) and low Amerindian contribution (less than 10%) in our population, while individual admixture analyses were consistent with the majority of individuals presenting high European contribution. This study demonstrates that the 52-plex kit is suitable for forensic cases in a Brazilian population, presenting results comparable with those obtained using a 16 STR panel.     

The variability in likelihood ratios due to different mechanisms

Recently there has been a drive towards standardisation of forensic DNA interpretation methods resulting in the uptake of probabilistic interpretation software. Some of these software solutions utilise Markov chain Monte Carlo techniques (MCMC). They will not produce an identical answer after repeat interpretations of the same evidence profile because of the Monte Carlo aspect. This is a new source of variability within the forensic DNA analysis process. In this paper we explore the size of the MCMC variability within the interpretation software STRmix™ compared to other sources of variability in forensic DNA profiling including PCR, capillary electrophoresis load and injection, and the makeup of allele frequency databases. The MCMC variability within STRmix™ was shown to be the smallest source of variability in this process.     

Microbial DNA in human nucleic acid extracts: Recoverability of the microbiome in DNA extracts stored frozen long-term and its potential and ethical implications for forensic investigation

Human DNA samples can remain unaltered for years and preserve important genetic information for forensic investigations. In fact, besides human genetic information, these extracts potentially contain additional valuable information: microbiome signatures. Forensic microbiology is rapidly becoming a significant tool for estimating post-mortem interval (PMI), and establishing cause of death and personal identity. To date, the possibility to recover unaltered microbiome signatures from human DNA extracts has not been proven. This study examines the microbiome signatures within human DNA extracts obtained from six cadavers with different PMIs, which were stored frozen for 5–16 years. Results demonstrated that the microbiome can be co-extracted with human DNA using forensic kits designed to extract the human host’s DNA from different tissues and fluids during decomposition. We compared the microbial communities identified in these samples with microbial DNA recovered from two human cadavers donated to the Forensic Anthropology Center at Texas State University (FACTS) during multiple decomposition stages, to examine whether the microbial signatures recovered from “old” (up to 16 years) extracts are consistent with those identified in recently extracted microbial DNA samples. The V4 region of 16 S rRNA gene was amplified and sequenced using Illumina MiSeq for all DNA extracts. The results obtained from the human DNA extracts were compared with each other and with the microbial DNA from the FACTS samples. Overall, we found that the presence of specific microbial taxa depends on the decomposition stage, the type of tissue, and the depositional environment. We found no indications of contamination in the microbial signatures, or any alterations attributable to the long-term frozen storage of the extracts, demonstrating that older human DNA extracts are a reliable source of such microbial signatures. No shared Core Microbiome (CM) was identified amongst the total 18 samples, but we identified certain species in association with the different decomposition stages, offering potential for the use of microbial signatures co-extracted with human DNA samples for PMI estimation in future. Unveiling the new significance of older human DNA extracts brings with it important ethical-legal considerations. Currently, there are no shared legal frameworks governing the long-term storage and use of human DNA extracts obtained from crime scene evidence for additional research purposes. It is therefore important to create common protocols on the storage of biological material collected at crime scenes. We review existing legislation and guidelines, and identify some important limitations for the further development and application of forensic microbiomics.     

Forensic performance of two insertion–deletion marker assays

Improving the amplification and analysis of highly degraded DNA extracts has been a longstanding area of research in forensic genetics. One of the most promising recent developments in analysis of degraded DNA is the availability of short, biallelic insertion-deletion length polymorphisms (InDels) in highly multiplexed assays. InDels share many of the favourable characteristics of single-nucleotide polymorphisms (SNPs) that make them ideal markers for analysis of degraded DNA, including: analysis in short amplicon size ranges, high multiplexing capability and low mutation rates. In addition, as length-based polymorphisms, InDels can be analysed with the same simple dye-labelled PCR primer methods as standard forensic short tandem repeats. Separation and detection of fluorescently dye-labelled PCR products by capillary electrophoresis eliminate the multiple step protocols required by SNP typing with single-base extension assays and provide a closer relationship between the input DNA and the profile peak height ratios. Therefore InDel genotyping represents an effective new approach for human identification that adds informative new loci to the existing battery of forensic markers. To assess the utility of InDels for forensic analysis, we characterised population variation with two InDel identification assays: the 30-plex Qiagen DIPplex panel and a 38-plex panel developed by Pereira et al. in 2009 [1]. Allele frequencies were generated for the 68 markers in US African American, Caucasian, East Asian and Hispanic samples. We made a thorough assessment of the individual and combined performance of the InDel sets, as well as characterising profile artifacts and other issues related to the routine use of these newly developed forensic assays based on artificially degraded DNA and mixed source samples.     

Direct comparison of post-28-cycle PCR purification and modified capillary electrophoresis methods with the 34-cycle “low copy number” (LCN) method for analysis of trace forensic DNA samples

The investigation of samples with low amounts of template DNA remains at the forefront of forensic DNA research and technology as it becomes increasingly important to gain DNA profile information from exceedingly trace levels of DNA. Previous studies have demonstrated that it is possible to obtain short tandem repeat (STR) profiles from <100 pg of template DNA by increasing the number of amplification cycles from 28 to 34, a modification often referred to as “low copy number” or LCN analysis. In this study, we have optimised post-PCR purification techniques applied after only 28 cycles of PCR, as well as using modified capillary electrophoresis injection conditions and have investigated the progressive application of these enhanced approaches. This paper reviews the characteristics of the profiles obtained by these methods compared with those obtained on the same samples after 34-cycle PCR. We observed comparable sensitivity to 34-cycle PCR in terms of the number of profiles with evidence of DNA and the number of allelic peaks per profile and we noted improved peak height and area magnitude with some sample types. Certain parameters reported to be adversely affected in 34-cycle LCN investigations, such as non-donor allele peaks and increased stutter peak ratio, were reduced by this approach. There are a number of advantages for trace samples in progressing from the standard 28-cycle process to the post-PCR processing method as compared to 34-cycle PCR method, including reduced sample consumption, reduced number of PCR amplifications required, and a staged approach to sample processing and profile interpretation.     

Forensic implications of PCR inhibition--A review

Polymerase chain reaction (PCR) is currently the method of choice for the identification of human remains in forensic coursework. DNA samples from crime scenes often contain co-purified impurities which inhibit PCR. PCR inhibition is the most common cause of PCR failure when adequate copies of DNA are present. Inhibitors have been routinely reported in forensic investigations of DNA extracted from a variety of templates. Humic compounds, a series of substances produced during decay process have been considered as the materials contaminating DNA in soil, natural waters and recent sediments. Those compounds have been frequently assigned as PCR inhibitors. The current report reviews the characteristics of PCR inhibition, including the proposed mechanisms of inhibition, detection methods and the available technologies to remove or overcome the inhibitory activities.     

A 21 marker insertion deletion polymorphism panel to study biogeographic ancestry

Insertion/deletion polymorphisms have recently received increased interest in the forensic genetics community. This class of markers combines the advantageous genetic properties of single nucleotide polymorphisms (i.e., low mutation rate, genetic stability, and short amplicon size) with the technical advantage of short tandem repeat markers (simple detection by fluorescence-labelled PCR and capillary electrophoresis). For a large number of indel markers significant differences in allele frequencies between the major populations have been reported, making this class of markers suitable for the analysis of biogeographic ancestry. We have developed a multiplex PCR assay designed to establish the biogeographic ancestry of forensic DNA samples based on insertion/deletion polymorphisms. A panel of 21 short indels with allele frequency differences between three major population groups (European, African and Asian) was selected to be incorporated into a single-tube multiplex PCR assay. The assay is highly sensitive, requiring less than 0.5 ng of genomic DNA for successful typing. Due to the short fragment lengths below 200 bp, the assay is ideally suited for the typing of challenging forensic genetic case work samples. A population genetic study has been performed proving the performance of the assay in inferring the ancestral population of individuals. The chosen 21 markers are sufficient to distinguish between three major global population groups. Furthermore, the assay design leaves room for an extension in order to cover additional population groups.     

High sensitivity multiplex short tandem repeat loci analyses with massively parallel sequencing

STR typing in forensic genetics has been performed traditionally using capillary electrophoresis (CE). However, CE-based method has some limitations: a small number of STR loci can be used; stutter products, dye artifacts and low level alleles. Massively parallel sequencing (MPS) has been considered a viable technology in recent years allowing high-throughput coverage at a relatively affordable price. Some of the CE-based limitations may be overcome with the application of MPS. In this study, a prototype multiplex STR System (Promega) was amplified and prepared using the TruSeq DNA LT Sample Preparation Kit (Illumina) in 24 samples. Results showed that the MinElute PCR Purification Kit (Qiagen) was a better size selection method compared with recommended diluted bead mixtures. The library input sensitivity study showed that a wide range of amplicon product (6–200 ng) could be used for library preparation without apparent differences in the STR profile. PCR sensitivity study indicated that 62 pg may be minimum input amount for generating complete profiles. Reliability study results on 24 different individuals showed that high depth of coverage (DoC) and balanced heterozygote allele coverage ratios (ACRs) could be obtained with 250 pg of input DNA, and 62 pg could generate complete or nearly complete profiles. These studies indicate that this STR multiplex system and the Illumina MiSeq can generate reliable STR profiles at a sensitivity level that competes with current widely used CE-based method.     

A bacterial signature-based method for the identification of seven forensically relevant human body fluids

Detection and identification of body fluids plays a crucial role in criminal investigation, as it provides information on the source of the DNA as well as corroborative evidence regarding the crime committed, scene, and/or association with persons of interest. Historically, forensic serological methods have been chemical, immunological, catalytic, spectroscopic, and/or microscopic in nature. However, most of these methods are presumptive, with few robust confirmatory exceptions. In recent years several new molecular methods (mRNA, miRNA, DNA methylation, etc.) have been proposed; although promising, these methods require high quality human DNA or RNA. Additional steps are required in RNA based methods. Additionally, RNA based methods cannot be used for old cases where only DNA extracts remain to sample from. In this study, a novel non-human DNA (microbiome) based method was developed for the identification of the majority of forensically relevant human biological samples. Eight hundred and twelve (n = 812) biological samples (semen, vaginal fluid, menstrual blood, saliva, feces, urine, and blood) were collected and preserved using methods commonly used in forensic laboratories for evidence collection. Variable region four (V4) of 16 S ribosomal DNA (16 S rDNA) was amplified using a dual-indexing strategy and then sequenced on the MiSeq FGx sequencing platform using the MiSeq Reagent Kit v2 (500 cycles) and following the manufacturer’s protocol. Machine learning prediction models were used to assess the classification accuracy of the newly developed method. As there was no significant difference in bacterial communities between vaginal fluid, menstrual blood, and female urine, these were combined as female intimate samples. Except in urine, the bacterial structures associated with male and female body fluid samples were not significantly different from one another. The newly developed method accurately identified human body fluid samples with an overall accuracy of more than 88%. This newly developed bacterial signature-based method is fast (no additional steps are needed as the same DNA can be used for both body fluid identification and STR typing), efficient (consume less sample as a single test can identify all major body fluids), sensitive (needs only 5 pg of bacterial DNA), accurate, and can be easily added into a forensic high throughput sequencing (HTS) panel.