Dentoskeletal changes following mini-implant molar intrusion in anterior open bite patients

Objective:To evaluate skeletal and dental changes after intrusion of the maxillary molars in subjects with anterior open bite.Materials and Methods:This retrospective cephalometric study evaluated skeletal and dental changes resulting from the use of maxillary orthodontic mini-implants in 31 consecutively treated patients. Radiographs were taken at the start and end of maxillary molar intrusion to evaluate the associated changes. Statistical analysis was performed using a one-sample t-test.Results:The mean treatment observation time was 1.31 years (SD  =  2.03). The maxillary first molars (P  =  0.0026) and second molars (P  =  0.039) were intruded. However, the mandibular first molars (P  =  0.0004) and second molars (P  =  0.003) erupted in adolescent patients. Both the maxillary and mandibular first molars inclined distally (P  =  0.025 and P  =  0.044, respectively). The mandibular plane angle decreased (P  =  0.036), lower facial height decreased (P  =  0.002), and the occlusal plane angle increased (P  =  0.009). The overbite increased (P < .0001). The ANB angle decreased (P < .0001). Mandibular dental and skeletal changes were more apparent in adolescents, while adults tended toward maxillary changes.Conclusions:Vertical traction from orthodontic mini-implants reduces the maxillary posterior dentoalveolar height, thereby assisting orthodontic closure of anterior open bite. However, simultaneous eruption or extrusion of the mandibular molars should be controlled. Adolescent patients tend to demonstrate more favorable effects of mandibular autorotation than do adults.     

Effects of palatal crib and bonded spurs in early treatment of anterior open bite: A prospective randomized clinical study

Objective:To evaluate the overbite correction of fixed palatal crib (FPC) and bonded lingual spur (BLS) in the early treatment of anterior open bite (AOB) in mixed dentition (primary outcome) as well as its influence on dental and skeletal cephalometric measurements (secondary outcome).Materials and Methods:The selected patients had AOB and a mean age of 8.23 years. They were divided into the following three groups by casting lots: control (n  =  13), palatal crib (n  =  13), and spur (n  =  13). Data from the lateral teleradiography was obtained at the beginning, at 6 months, and after 1 year. The cephalometric analysis was performed by Cef-X program, recording the values of SNA, SNB, ANB, SnG oGn, 1.PP, IMPA, nasolabial angle, overbite, and overjet. Intergroup and intragroup comparisons were obtained via one-way analysis of variance.Results:The degree of AOB was similar at baseline (P > .05). At 6 months and then after 1 year all groups showed improvement in the overbite. However, only the crib and spur groups showed positive overbite. No cephalometric measurements changed significantly over the period analyzed.Conclusions:We conclude that the FPC and BLS are simple and effective for the treatment of anterior open bite, with the advantage given to the FPC.     

Desire for orthodontic treatment and associated factors among adolescents in southern Brazil

Objective:To estimate the prevalence of the desire for orthodontic treatment and investigate associated factors among adolescents in southern Brazil.Materials and Methods:A cross-sectional study was carried out with 704 adolescents aged 12 and 13 years at municipal public schools in the city of Balneário Camboriú (southern Brazil). The adolescents answered a previously tested questionnaire addressing satisfaction with their dental appearance, speech function, chewing function, and the desire for orthodontic treatment. The parents/guardians answered a questionnaire addressing satisfaction with their child''s dental appearance and socioeconomic variables. A trained and calibrated orthodontist collected clinical data on malocclusion using the Dental Aesthetic Index (DAI). Statistical analysis was performed using multivariate Poisson regression with robust variance.Results:The prevalence of the desire for orthodontic treatment was 69.6% (490/704). In the adjusted analysis, the outcome was significantly more prevalent among girls (P < .001), those with difficulty chewing (P  =  .026), those dissatisfied with their dental appearance (P < .001), and those with greater malocclusion severity (P < .001). The following orthodontic characteristics were associated with the desire for orthodontic treatment in the multivariate model: diastema in anterior segment (P < .001), anterior maxillary irregularity (P < .001), maxillary overjet ≥6 mm (P < .001), and mandibular overjet (P  =  .047).Conclusions:The desire for orthodontic treatment among 12- and 13-year-old adolescents is influenced by gender, dissatisfaction with one''s dental appearance, difficulty chewing, malocclusion severity, and orthodontic characteristics. These findings should be considered together with normative indications regarding the need for orthodontic treatment in adolescents.     

A Comparison Study of Upper Airway among Different Skeletal Craniofacial Patterns in Nonsnoring Chinese Children

Objective:Patients with OSAS (obstructive sleep apnea syndrome) demonstrate decreased upper airway dimension and craniofacial skeletal abnormalities. The study was performed to analyze whether upper airway dimensions differed among Chinese nonsnoring children of different sagittal and vertical skeletal facial morphologies.Materials and Methods:Lateral cephalometric records were used to measure the dimensions of the upper airway. Two groups of subjects were studied. A group of subjects with a normodivergent facial pattern (n  =  190; FH-MP angle between 23.5° and 30.5°) was divided into three subgroups according to ANB angle (Class I, II, or III). A second group of subjects with a normal sagittal facial pattern (n  =  180; ANB angle between 0.7° and 4.7°) was divided into three subgroups according to the FH-MP angle (low angle, normal angle, or high angle). All subgroups were matched for age and sex.Results:In the group of subjects with a normodivergent facial pattern, a significant tendency for reduced upper airway dimension in the inferior part (palatopharyngeal and hypopharynx) was found in the Class III, Class I, and Class II subgroups, in that order. In the group of subjects with a normal sagittal facial pattern, the superior part of the airway (nasopharyngeal and palatopharyngeal) decreased with increasing mandibular plane angle.Conclusion:The sagittal and vertical skeletal patterns may be contributory factors for the variation of the inferior and superior part of the upper airway, respectively. Skeletal deficiency of nonsnoring Chinese children may predispose them to upper airway obstruction.     

Comparison of pharyngeal airway volume among different vertical skeletal patterns: A cone-beam computed tomography study

Objective:To test the null hypothesis that there are no significant differences in pharyngeal airway volumes among adult patients with different vertical skeletal patterns and a clinically normal sagittal skeletal pattern using cone-beam computed tomography (CBCT).Material and Methods:The study sample consisted of 100 adult patients (45 men and 55 women; mean age  =  24.0 ± 5.3 years) with a normal sagittal skeletal pattern divided into three groups according to the vertical skeletal patterns: high angle (32 patients: 15 women and 17 men), low angle (34 patients: 14 women and 20 men), and normal angle (34 patients: 16 women and 18 men) groups. Nasopharyngeal, oropharyngeal, and total airway volumes of patients in all vertical groups were calculated. Group differences were analyzed using one-way analysis of variance and post hoc Tukey tests.Results:Nasopharyngeal airway volume in the high-angle group (mean  =  6067.9 ± 1693.9 mm³) was significantly lower than that of the low- and normal-angle groups (P < .01). Oropharyngeal airway volume was highest in the low-angle group (mean  =  15,957.6 ± 6817.2 mm³) and significantly decreased in the control (mean  =  11,826.1 ± 4831.9 mm³; P  =  .008) and high angle (mean  =  10,869.1 ± 4084.1 mm³; P  =  .001) groups. Total airway volume was highest in the low-angle group (mean  =  24,261.6 ± 8470.1 mm³) and lowest in the high-angle group (mean  =  16,937.0 ± 5027.4 mm³; P < .001).Conclusion:The null hypothesis was rejected. Significant differences were found in pharyngeal airway volumes among different skeletal vertical patterns.     

Incisor inclination changes produced by two compliance-free Class II correction protocols for the treatment of mild to moderate Class II malocclusions

Objective:To compare the changes in incisor inclination between two compliance-free Class II correction protocols for the treatment of mild to moderate Class II malocclusions.Materials and Methods:Among Class II malocclusion patients a total of 38 consecutive patients treated with the Xbow appliance and later with full brackets (XB) were compared to 36 consecutive patients treated with Forsus connected to the archwire while on full brackets (FO). Evaluated cephalometric variables were overjet, overbite, skeletal Class II, lower incisor inclination, and upper incisor inclination. Factors that were analyzed were gender, treatment type, age at start of treatment (T1), and treatment length. Independent t-tests, χ², multiple analysis of variance, and Pearson correlations were applied.Results:No differences in incisor inclination between both treatment protocols were identified. At T1 no statistical difference for any cephalometric variable was demonstrated with regard to gender and treatment type. Gender was also not associated with a different treatment time or age at T1. The mean treatment time was 24.2 months for XB and 30.2 months for the FO group (P  =  .037). XB patients averaged 10 fewer months of fixed edgewise appliances compared to FO patients. Neither gender nor treatment type had any influence on the changes of the evaluated dependent variables between T1 and the end of treatment. Lower incisors proclined more the longer the treatment (P  =  .005). Both overjet and upper incisor inclination were affected by age at T1 (P  =  .001 and P  =  .014, respectively).Conclusions:Both compliance-free Class II correction protocols for the treatment of mild to moderate Class II malocclusions appear to generate the same amount of incisor inclination. Large variability was identified.     

Anteroposterior skeletofacial classification and its relationship to maxillary second molar buccopalatal angulation

ObjectiveTo compare second molar angulation to the occlusal plane with cephalometric measurements corresponding to AP skeletal discrepancy.Materials and Methods72 patients'' pre-orthodontic records were analyzed. A plane was constructed along the cusps of the upper second molar and measured to a proxy for the occlusal plane. The angle between the planes was measured. ANB, Wits appraisal, U1-SN, IMPA, A-B perpendicular to Frankfort, and overjet were measured on the patients'' cephalograms. Generalized additive mixed model analysis was performed to analyze the relationship between the second molar angulation and the cephalometric measurements.ResultsAll six cephalometric measurements showed a significant relationship with the second molar angulation, with Class III patients having a larger angle than Class II and I patients.ConclusionsClass III patients have upper second molars that are significantly tipped from the occlusal plane. The second molars require special attention for correction prior to orthognathic surgery for Class III patients in order to avoid deleterious effects from the malpositioned teeth.     

Skeletal and Soft Tissue Point A and B Changes Following Orthodontic Treatment of Nepalese Class I Bimaxillary Protrusive Patients

Objectives:To test the hypothesis that there is no correlation in the interrelationships of skeletal and soft tissue points A and B with anterior teeth retraction.Materials and Methods:Thirty adult Class I bimaxillary protrusion patients treated with preadjusted appliances after first premolar extraction were included. Pretreatment and posttreatment variables were compared using paired t-test, and the relationship of soft and hard tissue variables was studied using Pearson correlation coefficient and linear regression equation.Results:Mean point A and soft tissue point A (sA) were retracted 2.7 mm (P < .001) and 1.7 mm (P < .001), and mean point B and soft tissue point B (sB) were retracted 2.1 mm (P < .001) and 1.2 mm (P < .001), respectively. Mean ratio of retraction of point A with sA and point B with sB was 1.5∶1 and 1.7∶1, respectively. A significant degree of correlation existed between retraction of point A and soft tissue point A (r  =  0.648, P < .01) and point B and soft tissue point B (r  =  0.806, P < .01). Linear regression analysis used to predict the changes in sA and sB showed significant relationship between point A and sA (r  =  0.543, F  =  11.7, R²  =  0.29, P < .001) and point B and sB (r  =  0.825, F  =  59.7, R²  =  0.68, P < .001). Decreases in hard and soft tissue convexity were due to the retraction of the skeletal and soft tissue points A and B in addition to the lips retraction.Conclusions:The hypothesis is rejected. Retraction of skeletal point A and B lead to retraction of sA and sB under controlled root positions. Nearly proportionate changes existed in the skeletal points and overlying corresponding soft tissue points.     

Efficacy of short-term chincup therapy for mandibular growth retardation in Class III malocclusion: A systematic review

Objective:To assess the efficacy of chincup therapy for mandibular growth retardation in early orthopedic treatment of Class III malocclusion.Materials and Methods:An electronic search for articles reporting randomized clinical trials, controlled clinical trials, and cohort studies testing the efficacy of chincup appliance for Class III malocclusion published up to the present was done through four databases: Cochrane Central Register of Controlled Trials (CENTRAL; to March 2010), MEDLINE (1950–March 2010), EMBASE (1980–March 2010), and CBM (1978–March 2010). Study quality assessment and data extraction were done by two reviewers independently. Meta-analysis was done with the assistance of Revman 5.01.Results:The search resulted in 50 articles. After selection following the established criteria, four cohort studies qualified for the final review analysis. The results showed that chincup therapy decreased SNB angle and increased ANB angle; the total pooled weighted mean difference values (95% confidence interval) were −1.18 (−1.69, −0.67; P < .00001) and 1.90 (0.60, 3.21; P  =  .004), respectively. Two studies showed a increase in Gonial angle (P < .05) but no significant change in the mandibular length (Cd-Gn; P  =  .059 and .39, respectively). One study indicated that chincup therapy exerted no effect on mandibular growth retardation, and mandibular growth continued after the treatment in a downward direction.Conclusion:There are insufficient data in these studies to make clear recommendations regarding the efficacy of chincup therapy in the retardation of mandibular growth.     

Cranial base characteristics in anteroposterior malocclusions: A meta-analysis

Objective:To investigate cranial base characteristics in malocclusions with sagittal discrepancies.Materials and Methods:An electronic search was performed in PubMed, Embase, Web of Science, and the Cochrane Library. A fixed- or random-effect model was applied to calculate weighted mean difference with 95% confidence intervals (CIs) according to statistical heterogeneity. Outcome measures were anterior, posterior, and total cranial base length and cranial base angle. Sensitivity analysis and publication bias were conducted.Results:Twenty studies that together included 1121 Class I, 1051 Class II, and 730 Class III cases qualified for the final analysis. Class III malocclusion demonstrated significantly reduced anterior (95% CI: −1.74, −0.53; P < .001 vs Class I; 95% CI: −3.30, −2.09; P < .001 vs Class II) and total cranial base length (95% CI: −3.33, −1.36; P < .001 vs Class I; 95% CI: −7.38, −4.05; P < .001 vs Class II). Further, Class II patients showed significantly greater anterior and total cranial base length than did Class I patients (95% CI: 0.51, 1.87; P < .001 for SN; 95% CI: 2.20, 3.30; P < .001 for NBa). Cranial base angle was significantly smaller in Class III than in Class I (95% CI: −3.14, −0.93; P < .001 for NSBa; 95% CI: −2.73, −0.68; P  =  .001 for NSAr) and Class II malocclusions (95% CI: −5.73, −1.06; P  =  .004 for NSBa; 95% CI: −6.11, −1.92; P < .001 for NSAr) and greater in Class II than in Class I malocclusions (95% CI: 1.38, 2.38; P < .001 for NSBa).Conclusions:This meta-analysis showed that anterior and total cranial base length and cranial base angle were significantly smaller in Class III malocclusion than in Class I and Class II malocclusions, and that they were greater in Class II subjects compared to controls.     

Response of the maxillary dentition to a statically determinate one-couple system with tip-back mechanics: A prospective clinical trial

Objective:To quantify the effects of tip-back mechanics on the maxillary first molars and incisors.Materials and Methods:Sixteen subjects with Class II end-on malocclusion were treated with an intrusion arch to achieve distalization of the maxillary molar through tip-back mechanics. Lateral cephalograms were taken prior to molar tip-back (T1), after molar tip-back (T2), and after molar root uprighting (T3). Data were analyzed using the Friedman’s and Wilcoxon signed rank tests to evaluate differences in time points (P ≤ .016).Results:The maxillary first molar distalized 1.53 mm (P = .001) with 6.65° (P = .001) of distal tipping and 0.86 mm (P = .001) of extrusion at T2. Minor relapse of the first molar (mesial direction) was seen at T3. The maxillary incisors flared labially 0.4 mm, and the incisor root apex moved palatally 1.19 mm (P = .005) at T2. At T3, the incisor root apex moved palatally 1.5 mm (P = .003) from T1. An angular change from T1 of 3.31° (P = .008) and 3.53° (P = .014) was seen at T2 and T3, respectively, as a result of palatal root movement of the maxillary incisors.Conclusions:A significant amount of distalization of maxillary molars was attained at the crown level with tip-back mechanics. Palatal root angulation change was significant in the incisors with minimal anteroposterior movement of the incisal edge.     

Analysis of smile esthetics in American Board of Orthodontic patients

Objective:To investigate the common denominators of an esthetically pleasing smile in patients who were considered to be successfully treated upon the submission to American Board Orthodontics (ABO) clinical examination.Material and Methods:A total of 462 patients were examined. Ninety subjects that fulfilled the inclusion criteria were included. Standardized digital smile photographs of the subjects were rated by 30 panel members, including orthodontists, general dentists, and parents of orthodontic patients, using a numeric version of the visual analog scale. Three groups were formed using the mean esthetic score ± standard deviation range: unattractive (n  =  21), average (n  =  47), and attractive (n  =  22) smiles. Eleven smile characteristics were digitally measured on the photographs and compared between the groups using one-way analysis of variance and χ² tests. Additionally, regression analyses were used to investigate the association of the smile characteristics with the esthetic score.Results:A significant difference was found between the three groups for the comparison of smile arc relationship (P < .001). When all the variables used in this study were entered in the regression analysis, a positive association was found (r  =  0.658; r²  =  0.434; P < .001). Additionally, two models were defined using stepwise regression. The first model included the smile arc (r  =  0.478; r²  =  0.228; P < .001), and the second model had both the smile arc and right gingival display/visible dentition display ratio (r  =  0.567; r²  =  0.321; P < .001).Conclusions:A harmonious smile arc relationship and less gingival display during a smile are significantly associated with smile attractiveness in patients considered successfully treated according to ABO standards.     

The effect of changes in primary attending doctor coverage frequency on orthodontic treatment time and results

Objective:To determine whether changes in primary attending (PA) doctor coverage frequency caused an increase in orthodontic treatment time or a decrease in the quality of treatment results in a postgraduate orthodontic clinic. The effect of T1 Peer Assessment Rating (PAR) scores on PA doctor coverage frequency, treatment times, and results was also evaluated.Materials and Methods:A sample of 191 postorthodontic subjects was divided into three groups based on PA doctor coverage (high, medium, or low). Treatment times, treatment results, and other variables were compared between the three PA coverage groups. Additionally, the sample was divided into three groups based on T1 PAR scores. Attending coverage frequency, treatment times, and results were compared between the T1 PAR groups.Results:No statistically significant differences were found in treatment time (P  =  .128) or results (P  =  .052). There were no statistically significant differences in the mean scores for T1 PAR (P  =  .056), T2 PAR (P  =  .602), patient age at T1 (P  =  .747), total appointments (P  =  .128), missed appointments (P  =  .177), or cancelled appointments (P  =  .183). Statistically significant differences were found between the low T1 PAR group and the medium and high T1 PAR groups (attending coverage, P  =  .008; results, P < .001; treatment time, P  =  .001).Conclusions:Under the conditions of this study, variations in PA doctor coverage frequency did not lengthen orthodontic treatment or reduce the quality of treatment results. Low T1 PAR scores were associated with less PA coverage, less change in PAR, and shorter treatment times.     

Effect of posterior impaction and setback of the maxilla on retropalatal airway and velopharyngeal dimensions after two-jaw surgery in skeletal Class III patients

Objective:To evaluate the changes in retropalatal airway and velopharyngeal dimensions after posterior impaction (PI) only or PI and setback (PI/SB) of the maxilla in patients with skeletal Class III undergoing two-jaw surgery.Materials and Methods:Subjects consisted of 60 Class III patients treated with two-jaw surgery. They were divided into two groups: group 1 (n  = 30; PI of the maxilla; mean  =  2.6 mm) and group 2 (n = 30; PI/SB of the maxilla; mean  =  2.8 mm and 1.8 mm, respectively). Using three dimensional computed tomography images taken 1month before surgery (T0) and at least 6 months after surgery (T1), retropalatal airway volume, minimum cross-sectional area, and lateral and anteroposterior (AP) dimensions of minimum cross-sectional area, soft palate angle, soft palate length, and pharyngeal depth were measured. A paired t-test and independent t-test were used for statistical analysis.Results:Group 1 showed increase in retropalatal airway volume and minimum cross-sectional area (P < .01 and P < .05, respectively). Group 2 exhibited decrease in retropalatal airway volume, minimum cross-sectional area, and lateral and AP dimensions of minimum cross-sectional area (all P < .01). Although groups 1 and 2 showed an increase in soft palate length (P < .01 and P < .001, respectively), pharyngeal depth significantly increased only in group 1 (P < .01). Groups 1 and 2 were significantly different in retropalatal airway volume, minimum cross-sectional area, and AP dimension (P < .05, P < .001, and P < .05, respectively).Conclusion:Because the direction of surgical movement in the maxilla can determine the changes in the retropalatal airway and velopharyngeal dimensions, it is recommended that clinicians investigate whether patients suffer from sleep-related breathing disorders before performing PI/SB of the maxilla.     

Comparison of double-plate appliance/facemask combination and facemask therapy in treating Class III malocclusions

Objective:To compare the treatment effects of double-plate appliance/facemask (DPA-FM) combined therapy and facemask (FM) therapy in treating Class III malocclusions.Materials and Methods:The material consisted of lateral cephalometric radiographs of 45 children with skeletal and dental Class III malocclusion. The first treatment group comprised 15 patients (mean age  =  11 years) treated with FM. The second treatment group comprised 15 patients (mean age  = 10 years 9 months) treated with DPA-FM. The third group comprised 15 patients (mean age  =  10 years 5 months) used as controls. The paired t-test was used to evaluate the treatment effects and changes during the treatment and observation period in each group. Differences between the groups were determined by variance analysis and the Duncan test.Results:With the DPA-FM and FM appliances, the SNA and ANB angles increased significantly. These changes were statistically different compared with the control group. Lower facial height showed a greater increase in both treatment groups than in the control group. Molar relation showed a greater increase in the DPA-FM group than in the FM group. The increase in U6/ANS-PNS angle in the FM group was significantly different from the DPA-FM and control groups. The L1/NB angle and Pg-T increased significantly only in the FM group, but no significant difference was found between the treatment groups.Conclusions:In the treatment of Class III malocclusion, both appliances were effective. The significant sagittal changes in the lower incisors and pogonion in the FM group compared with the nonsignificant changes in the DPA-FM group might be due to the restriction effect of acrylic blocks in the DPA-FM group.     

Influence of unilateral maxillary first molar extraction treatment on second and third molar inclination in Class II subdivision patients

Objective:To assess the maxillary second molar (M2) and third molar (M3) inclination following orthodontic treatment of Class II subdivision malocclusion with unilateral maxillary first molar (M1) extraction.Materials and Methods:Panoramic radiographs of 21 Class II subdivision adolescents (eight boys, 13 girls; mean age, 12.8 years; standard deviation, 1.7 years) before treatment, after treatment with extraction of one maxillary first molar and Begg appliances and after at least 1.8 years in retention were retrospectively collected from a private practice. M2 and M3 inclination angles (M2/ITP, M2/IOP, M3/ITP, M3/IOP), constructed by intertuberosity (ITP) and interorbital planes (IOP), were calculated for the extracted and nonextracted segments. Random effects regression analysis was performed to evaluate the effect on the molar angulation of extraction, time, and gender after adjusting for baseline measurements.Results:Time and extraction status were significant predictors for M2 angulation. M2/ITP and M2/IOP decreased by 4.04 (95% confidence interval [CI]: −6.93, 1.16; P  =  .001) and 3.67 (95% CI: −6.76, −0.58; P  =  .020) in the extraction group compared to the nonextraction group after adjusting for time and gender. The adjusted analysis showed that extraction was the only predictor for M3 angulation that reached statistical significance. M3 mesial inclination increased by 7.38° (95% CI: −11.2, −3.54; P < .001) and 7.33° (95% CI: −11.48, −3.19; P  =  .001).Conclusions:M2 and M3 uprighting significantly improved in the extraction side after orthodontic treatment with unilateral maxillary M1 extraction. There was a significant increase in mesial tipping of maxillary second molar crowns over time.     

Chin cup effects using two different force magnitudes in the management of Class III malocclusions

Objectives:To evaluate the dental and skeletal effects of chin cup using two different force magnitudes in the management of Class III malocclusion cases.Materials and Methods:Fifty growing patients (26 males and 24 females) with skeletal Class III and mandibular prognathism were selected. The patients were divided into three groups. Patients in group 1 (n  =  20) were treated with a chin cup and occlusal bite plane using 600 g of force per side. Patients in group 2 (n  =  20) were subjected to the same treatment as in group 1 but using 300 g of force per side. In group 3 (n  =  10) no treatment was performed. For all patients, lateral cephalograms were taken before treatment and after 1 year. Cephalograms were traced and analyzed. The collected data were analyzed statistically using one-way analysis of variance and the Tukey test.Results:In the treatment groups, the SNB angle and ramus height decreased significantly. The ANB angle, Wits appraisal, anterior facial height, mandibular plane angle, and retroclination of the mandibular incisors were significantly increased in comparison to the control group. Utilization of either force showed no significant differences, except that the reduction in the ramus height was significantly greater with the use of higher force.Conclusions:The use of a chin cup improved the maxillomandibular base relationship in growing patients with Class III malocclusion but with little skeletal effect. The utilization of either force had the same effects, except that the higher force had a more pronounced effect in reduction of ramus height.     

Impact of malocclusion and dentofacial anomalies on the prevalence and severity of dental caries among adolescents

Objectives:To investigate the association between malocclusion/dentofacial anomalies and dental caries among adolescents.Materials and Methods:A cross-sectional study was conducted with 509 adolescents aged 11 to 14 years enrolled at public schools in the city of Osório in southern Brazil. Parents/caregivers answered a structured questionnaire on demographic and socioeconomic variables. A trained examiner recorded the presence of malocclusion (Dental Aesthetic Index [DAI]), traumatic dental injury, and dental caries. Data analysis involved the chi-square, Mann-Whitney, and Kruskal-Wallis tests. Poisson regression with robust variance was used for the multivariable analysis.Results:A total of 44.8% of the adolescents had dental caries (mean DFMT  =  1.33 ± 1.84). The DAI index ranged from 15 to 77 (mean  =  29.0 ± 7.9); 43.6% of the sample had severe malocclusion and 11.6% had traumatic dental injury. The prevalence and severity of dental caries were significantly greater among adolescents with severe malocclusion. The multivariate analysis demonstrated that adolescents with severe or handicapping malocclusion had a 31% greater probability of having dental caries (prevalence ratio: 1.31; 95% CI: 1.02–1.67), independently of demographic, socioeconomic, or clinical aspects. The orthodontic characteristics associated with the occurrence and severity of caries were maxillary irregularity ≥3 mm (P  =  .021) and abnormal molar relationship (P  =  .021).Conclusions:Handicapping malocclusion, maxillary irregularity, and abnormal molar relationship were associated with the occurrence and severity of dental caries. The findings suggest that the prevention and treatment of these conditions can contribute to a reduction in dental caries among adolescents.     

Three-dimensional upper-airway assessment in patients with bronchial asthma

Objective:To assess the upper airway (UAW) total volume (TV), the nasopharyngeal narrowest area (NNA), and the oropharyngeal narrowest area (ONA) in patients with bronchial asthma.Materials and Methods:The sample consisted of 52 patients divided into two groups: the control group (n  =  26; mean age  =  14.85 years), which consisted of patients not suffering from bronchial asthma; and the asthmatic group (n  =  26; mean age  =  16.65 years), which consisted of patients with bronchial asthma. To assess UAW-related variables (TV, NNA, and ONA), cone-beam computed tomography scans of the patients were evaluated by means of the Dolphin Imaging software 11.5. All measurements were repeated after 30 days, and the results were submitted to reliability tests by means of the intraclass correlation coefficient and the Bland-Altman agreement test. The values obtained for TV, NNA, and ONA for each group were compared by using Student''s t-test for independent samples (5% level of significance).Results:The results showed that the groups were matched concerning gender, cephalometric characteristics, and type of malocclusion. The asthmatic group had significantly lower TV (P  =  .01) and ONA (P  =  .007) than the control group. However, no significant difference was observed for NNA between the groups (P  =  .54).Conclusions:Bronchial asthma may be a determining factor for the reduction of UAW dimensions, as patients with asthma showed significant reductions in TV and ONA dimensions.     

Newly defined landmarks for a three-dimensionally based cephalometric analysis: A retrospective cone-beam computed tomography scan review

Objectives:To identify two novel three-dimensional (3D) cephalometric landmarks and create a novel three-dimensionally based anteroposterior skeletal measurement that can be compared with traditional two-dimensional (2D) cephalometric measurements in patients with Class I and Class II skeletal patterns.Materials and Methods:Full head cone-beam computed tomography (CBCT) scans of 100 patients with all first molars in occlusion were obtained from a private practice. InvivoDental 3D (version 5.1.6, Anatomage, San Jose, Calif) was used to analyze the CBCT scans in the sagittal and axial planes to create new landmarks and a linear 3D analysis (M measurement) based on maxillary and mandibular centroids. Independent samples t-test was used to compare the mean M measurement to traditional 2D cephalometric measurements, ANB and APDI. Interexaminer and intraexaminer reliability were evaluated using 2D and 3D scatterplots.Results:The M measurement, ANB, and APDI could statistically differentiate between patients with Class I and Class II skeletal patterns (P < .001). The M measurement exhibited a correlation coefficient (r) of −0.79 and 0.88 with APDI and ANB, respectively.Conclusions:The overall centroid landmarks and the M measurement combine 2D and 3D methods of imaging; the measurement itself can distinguish between patients with Class I and Class II skeletal patterns and can serve as a potential substitute for ANB and APDI. The new three-dimensionally based landmarks and measurements are reliable, and there is great potential for future use of 3D analyses for diagnosis and research.