Influence of unilateral maxillary first molar extraction treatment on second and third molar inclination in Class II subdivision patients

Objective:To assess the maxillary second molar (M2) and third molar (M3) inclination following orthodontic treatment of Class II subdivision malocclusion with unilateral maxillary first molar (M1) extraction.Materials and Methods:Panoramic radiographs of 21 Class II subdivision adolescents (eight boys, 13 girls; mean age, 12.8 years; standard deviation, 1.7 years) before treatment, after treatment with extraction of one maxillary first molar and Begg appliances and after at least 1.8 years in retention were retrospectively collected from a private practice. M2 and M3 inclination angles (M2/ITP, M2/IOP, M3/ITP, M3/IOP), constructed by intertuberosity (ITP) and interorbital planes (IOP), were calculated for the extracted and nonextracted segments. Random effects regression analysis was performed to evaluate the effect on the molar angulation of extraction, time, and gender after adjusting for baseline measurements.Results:Time and extraction status were significant predictors for M2 angulation. M2/ITP and M2/IOP decreased by 4.04 (95% confidence interval [CI]: −6.93, 1.16; P  =  .001) and 3.67 (95% CI: −6.76, −0.58; P  =  .020) in the extraction group compared to the nonextraction group after adjusting for time and gender. The adjusted analysis showed that extraction was the only predictor for M3 angulation that reached statistical significance. M3 mesial inclination increased by 7.38° (95% CI: −11.2, −3.54; P < .001) and 7.33° (95% CI: −11.48, −3.19; P  =  .001).Conclusions:M2 and M3 uprighting significantly improved in the extraction side after orthodontic treatment with unilateral maxillary M1 extraction. There was a significant increase in mesial tipping of maxillary second molar crowns over time.     

Maxillary incisor inclination of skeletal Class III patients treated with extraction of the upper first premolars and two-jaw surgery: Conventional orthognathic surgery vs surgery-first approach

Objective:To investigate the differences in the amount and pattern of the maxillary incisor (MXI) inclination change in skeletal Class III patients treated with extraction of the maxillary first premolars (MXP1) and two-jaw surgery (TJS) between conventional orthognathic surgery (COS) and surgery-first approach (SFA).Materials and Methods:The study included 60 skeletal Class III patients who had normal maxillary position, prognathic mandible, and mild crowding in the maxillary arch (≤4 mm). The patients were divided into group 1 (COS, n  =  36) and group 2 (SFA, n  =  24). Lateral cephalograms were taken before treatment (T0), 1 month before surgery (T1), within 1 month after surgery (T2), and after debonding (T3) for COS patients and at T0, T2, and T3 for SFA patients. After measurement of the skeletodental variables, statistical analyses were performed.Results:During T0–T2, the amount of MXI inclination change (ΔU1-SN) in group 1 was significantly larger than that in group 2 (−12.8° vs −4.4°; P < .001). During T2–T3, ΔU1-SN in groups 1 and 2 occurred in opposite directions (3.8° vs −5.9°; P < .001). However, the total amount of ΔU1-SN during T0–T3 was not different between groups 1 and 2 (−9.0° vs −10.3°). At T3 the U1-SN values for groups 1 and 2, respectively, moved closer to normal according to the values of the normal range rate (all 83%), relative percentage ratio (102.4% and 100.1%), and achievement ratio (77.7% and 97.8%).Conclusions:The results of this study might provide basic data for predicting the amount and pattern of MXI inclination change in SFA for skeletal Class III TJS patients.     

Long-term evaluation of Class II subdivision treatment with unilateral maxillary first molar extraction

Objective:To evaluate the long-term effects of asymmetrical maxillary first molar (M1) extraction in Class II subdivision treatment.Materials and Methods:Records of 20 Class II subdivision whites (7 boys, 13 girls; mean age, 13.0 years; SD, 1.7 years) consecutively treated with the Begg technique and M1 extraction, and 15 untreated asymmetrical Class II adolescents (4 boys, 11 girls; mean age, 12.2 years; SD, 1.3 years) were examined in this study. Cephalometric analysis and PAR assessment were carried out before treatment (T1), after treatment (T2), and on average 2.5 years posttreatment (T3) for the treatment group, and at similar time points and average follow-up of 1.8 years for the controls.Results:The adjusted analysis indicated that the maxillary incisors were 2.3 mm more retracted in relation to A-Pog between T1 and T3 (β  =  2.31; 95% CI; 0.76, 3.87), whereas the mandibular incisors were 1.3 mm more protracted (β  =  1.34; 95% CI; 0.09, 2.59), and 5.9° more proclined to the mandibular plane (β  =  5.92; 95% CI; 1.43, 10.41) compared with controls. The lower lip appeared 1.4 mm more protrusive relative to the subnasale-soft tissue-Pog line throughout the observation period in the treated adolescents (β  =  1.43; 95% CI; 0.18, 2.67). There was a significant PAR score reduction over the entire follow-up period in the molar extraction group (β  =  −6.73; 95% CI; −10.7, −2.7). At T2, 65% of the subjects had maxillary midlines perfectly aligned with the face.Conclusions:Unilateral M1 extraction in asymmetrical Class II cases may lead to favorable occlusal outcomes in the long term without harming the midline esthetics and soft tissue profile.     

Evaluation of canting correction of the maxillary transverse occlusal plane and change of the lip canting in Class III two-jaw orthognathic surgery

Objective:To compare the effect of canting correction in anterior maxillary transverse occlusal planes (AMTOP) and posterior maxillary transverse occlusal planes (PMTOP) on the change of lip canting (LC) in two-jaw surgery (TJS) cases.Materials and Methods:The samples consisted of eight young adult patients (three males and five females, mean age  =  24.1 ± 4.5 years) who had skeletal Class III malocclusion (CIII), facial asymmetry (FA), and LC and who underwent TJS. Two-dimensional lateral and posteroanterior cephalograms and three-dimensional facial scanning taken 1 week before (T1) and 6 months after TJS (T2) were combined using the Morpheus 3D program. Six linear and angular variables were measured and statistically analyzed.Results:When comparing the values of the linear and angular variables at the T1 and T2 stages there was significant canting correction of AMTOP (1.7 mm vs −0.3 mm; 3.0° vs 0.1°), PMTOP (3.5 mm vs 0.1 mm, 3.3° vs −0.1°), and LC (3.0 mm vs 0.7 mm, 4.7° vs 2.1°) (all P < .05). Although the angular change ratios (ΔLC/ΔAMTOP and ΔLC/ΔPMTOP) did not exhibit a significant difference (0.99 vs 0.83), the linear change ratio of ΔLC/ΔAMTOP was significantly higher than that of ΔLC/ΔPMTOP (1.67 vs 0.74, P < .05). The angular change of ΔLC showed a significant correlation with ΔAMTOP (r²  =  0.64; P < .05). However, the linear change of ΔLC was significantly correlated with both the angular and linear changes of ΔAMTOP (r²  =  0.62 and 0.66; both P < .05). Therefore, the amount of LC change was more related to the canting correction of AMTOP than to that of PMTOP.Conclusion:In TJS cases with CIII, FA, and LC, the amount of canting correction of the AMTOP should be considered to predict the actual LC change.     

Long-term stability of maxillary protraction therapy in Class III patients with complete unilateral cleft lip and palate

Objectives:This study evaluated the long-term stability of maxillary protraction (MP) in patients with complete unilateral cleft lip and palate (UCLP) and identified factors influencing relapse and long-term outcomes.Materials and Methods:Twenty-three adolescents with UCLP who underwent MP therapy were recalled when craniofacial growth was close to completion. Subjects exhibiting reverse/positive overjets were assigned to unstable/stable groups. Lateral cephalometric measurements were made before treatment (T0), after active treatment (T1), and at the end of the growth spurt (T2).Results:About 63% of the subjects exhibited positive overjets during follow-up. The unstable group demonstrated higher B–x and Co–Gn distances than the stable group (both P < .05) at T0. More short-term (T0–T1) sagittal advancement of point A (A–y) was evident in the unstable group than in the stable group (P < .05), but no long-term difference was apparent between the two groups (P = .481). During the posttreatment period (T1–T2), the SNA angle and maxillary incisor protrusion (U1–SN angle) were considerably lower in the unstable group than in the stable group (both P < .05). Overall, the unstable group exhibited a lower increase in the vertical extent of point A (A–x) than the stable group from T0 to T2 (P < .05).Conclusions:In the long term, MP affords favorable maxillary advancement in patients with UCLP. A mandibular excess at T0 and vertical maxillary hypoplasia may contribute to the long-term relapse of a reverse overjet.     

Maxillary anterior alignment stability in Class I and Class II malocclusions treated with or without extraction

Objective:To compare the postretention stability of maxillary incisors alignment in subjects with Class I and II malocclusion treated with or without extractions.Materials and Methods:The sample comprised 103 subjects with initial maxillary anterior irregularity greater than 3 mm and was divided into four groups: group 1 comprised 19 patients with Class I malocclusion treated with nonextraction (mean initial age = 13.06 years); group 2 comprised 19 patients with Class II malocclusion treated with nonextraction (mean initial age = 12.54 years); group 3 comprised 30 patients with Class I malocclusion treated with extractions (mean initial age = 13.16 years); group 4 comprised 35 patients with Class II malocclusion treated with extractions (mean initial age = 12.99 years). Dental casts were obtained at three different stages: pretreatment (T1), posttreatment (T2), and long-term posttreatment (T3). Maxillary incisor irregularity and arch dimensions were evaluated. Intergroup comparisons were performed by one-way analysis of variance followed by Tukey tests.Results:In the long-term posttreatment period, relapse of maxillary crowding and arch dimensions was similar in all groups.Conclusion:Changes in maxillary anterior alignment in Class I and Class II malocclusions treated with nonextractions and with extractions were similar in the long-term posttreatment period.     

Cranial base characteristics in anteroposterior malocclusions: A meta-analysis

Objective:To investigate cranial base characteristics in malocclusions with sagittal discrepancies.Materials and Methods:An electronic search was performed in PubMed, Embase, Web of Science, and the Cochrane Library. A fixed- or random-effect model was applied to calculate weighted mean difference with 95% confidence intervals (CIs) according to statistical heterogeneity. Outcome measures were anterior, posterior, and total cranial base length and cranial base angle. Sensitivity analysis and publication bias were conducted.Results:Twenty studies that together included 1121 Class I, 1051 Class II, and 730 Class III cases qualified for the final analysis. Class III malocclusion demonstrated significantly reduced anterior (95% CI: −1.74, −0.53; P < .001 vs Class I; 95% CI: −3.30, −2.09; P < .001 vs Class II) and total cranial base length (95% CI: −3.33, −1.36; P < .001 vs Class I; 95% CI: −7.38, −4.05; P < .001 vs Class II). Further, Class II patients showed significantly greater anterior and total cranial base length than did Class I patients (95% CI: 0.51, 1.87; P < .001 for SN; 95% CI: 2.20, 3.30; P < .001 for NBa). Cranial base angle was significantly smaller in Class III than in Class I (95% CI: −3.14, −0.93; P < .001 for NSBa; 95% CI: −2.73, −0.68; P  =  .001 for NSAr) and Class II malocclusions (95% CI: −5.73, −1.06; P  =  .004 for NSBa; 95% CI: −6.11, −1.92; P < .001 for NSAr) and greater in Class II than in Class I malocclusions (95% CI: 1.38, 2.38; P < .001 for NSBa).Conclusions:This meta-analysis showed that anterior and total cranial base length and cranial base angle were significantly smaller in Class III malocclusion than in Class I and Class II malocclusions, and that they were greater in Class II subjects compared to controls.     

Assessing anteroposterior basal bone discrepancy with the Dental Aesthetic Index

Objective:To investigate dental appearance and cephalometric features, using a sample of orthognathic and/or orthodontic patients. A special interest was to identify the relationship of the Dental Aesthetic Index (DAI) with anteroposterior basal bone discrepancy (APBBD) and cephalometric indicators.Materials and Methods:A full sample of 159 patients in two Japanese hospitals was used. Each patient was assessed with a preorthodontic dental cast and cephalometric radiography.Results:Malocclusion with APBBD was more prevalent among high DAI subjects (P  =  .034, OR  =  1.04, 95% CI: 1.00–1.08), Class III malocclusion patients (P  =  .048, OR  =  2.32, 95% CI: 1.01–5.34) and male patients (P  =  .008, OR  =  2.96, 95% CI: 1.33–6.61). Participants scoring 88 points (the highest score in this sample) of the DAI had 16.84 times the risk of APBBD of those who scored 17 points (the lowest score in this sample). Patients with APBBD presented with a greater adjusted ANB angle (t  =  −8.10, P < .001) and a larger adjusted A-B/NF appraisal (t  =  −9.65, P < .001). The SNA angle (P < .001), the SNB angle (P  =  .002), the adjusted ANB angle (P  =  .001), and the adjusted A-B/NF appraisal (P  =  .035) were associated with DAI scores in cubic regression models.Conclusion:This study has demonstrated a relationship between the DAI and APBBD. Feasibility of using the adjusted ANB angle and the adjusted A-B/NF appraisal to assess severity of APBBD has been confirmed. The DAI may provide a supportive method to evaluate orthognathic needs. Future investigations are indicated.     

The short-term treatment effects of face mask therapy in Class III patients based on the anchorage device: Miniplates vs rapid maxillary expansion

Objective:To compare the short-term treatment effects of face mask therapy with miniplates (FM-MP) and face mask therapy with rapid maxillary expansion appliance (FM-RME) in growing Class III malocclusion patients with maxillary hypoplasia.Materials and Methods:Twenty patients were allocated into two groups according to the anchorage device: FM-MP group (n  =  10; mean age  =  11.2 ± 1.2 years; miniplates in the zygomatic buttress area) and FM-RME group (n  =  10; mean age  =  10.7 ± 1.3 years; bonded or banded RME). The face mask was applied for 12 to 14 hours/day in both groups with a force of 400 g/side directed 30° downward and forward from the occlusal plane. Lateral cephalograms were taken before (T1) and after FM-MP or FM-RME therapy (T2). Skeletodental and soft-tissue variables were measured. Paired and independent t-tests were performed for statistical analysis.Results:Both groups exhibited significant forward movement of point A and posterior repositioning and opening rotation of the mandible from T2 to T1. The FM-MP group showed significant protraction of orbitale (ΔSNO), and the FM-RME group showed a decrease in overbite and an increase in Björk sum. Comparing the amount of changes between the two groups, the FM-MP group displayed greater forward movement of the maxilla than the FM-RME group (ΔSNA, ΔA to N perp, all P < .05). However, the FM-RME group exhibited a greater opening rotation of the mandible (ΔSNB, Björk sum, all P < .01; ΔPog to N-perp, P < .05) and labioversion of the maxillary incisors (ΔU1-FH, P < .05).Conclusion:FM-MP therapy induces a greater advancement of the maxilla, less posterior repositioning and opening rotation of the mandible, and less proclination of the maxillary incisors than FM-RME therapy.     

New treatment modality for maxillary hypoplasia in cleft patients: protraction facemask with miniplate anchorage

Objective:To present cleft patients treated with protraction facemask and miniplate anchorage (FM/MP) in order to demonstrate the effects of FM/MP on maxillary hypoplasia.Materials and Methods:The cases consisted of cleft palate only (12 year 1 month old girl, treatment duration  =  16 months), unilateral cleft lip and alveolus (12 year 1 month old boy, treatment duration  =  24 months), and unilateral cleft lip and palate (7 year 2 month old boy, treatment duration  =  13 months). Curvilinear type surgical miniplates (Martin, Tuttlinger, Germany) were placed into the zygomatic buttress areas of the maxilla. After 4 weeks, mobility of the miniplates was checked, and the orthopedic force (500 g per side, 30° downward and forward from the occlusal plane) was applied 12 to 14 hours per day.Results:In all cases, there was significant forward displacement of the point A. Side effects such as labial tipping of the upper incisors, extrusion of the upper molars, clockwise rotations of the mandibular plane, and bite opening, were considered minimal relative to that usually observed with conventional protraction facemask with tooth-borne anchorage.Conclusions:FM/MP can be an effective alternative treatment modality for maxillary hypoplasia with minimal unwanted side effects in cleft patients.     

Maxillary canine impaction in orthodontic patients with and without agenesis: A cross-sectional radiographic study

Objective:To assess potential associations between maxillary canine impaction (MCI) and agenesis status as well as between MCI and gender.Materials and Methods:The records of 182 orthodontic patients with agenesis (excluding the third molars) and 630 orthodontic patients without agenesis were examined. Diagnosis of MCI was based on pretreatment panoramic radiographs. Maxillary canines that had not erupted as a result of physical barrier or deflection in the eruption path at the dental age of at least 12 years were considered impacted. Logistic regression analysis was used to test for the associations of interest.Results:MCI was detected in 5.6% (n  =  35) of the nonagenesis group (28 female and 7 male participants) and in 18.1% (n  =  33) of the agenesis group (20 female and 13 male participants). Bilateral impaction was detected in 12 patients (34.3%) of the nonagenesis group and in 11 patients (33.3%) of the agenesis group. There was evidence that maxillary lateral incisor agenesis (odds ratio  =  5.1, 95% confidence interval [CI] 2.5–10.5, P < .001) and second premolar agenesis (odds ratio  =  2.6, 95% CI 1.0–6.6, P  =  .042) were significant MCI predictors after adjusting for gender. The odds of MCI were 69% higher in female versus male subjects after adjusting for agenesis status (95% CI 0.97–2.92, P  =  .063).Conclusions:This study indicates that there is evidence that agenesis status is a strong predictor of MCI, whereas gender is a weak predictor of MCI. Caution should be exercised in interpreting the results because of the observational nature of the present study.     

Comparisons of soft tissue chin thickness in adult patients with various mandibular divergence patterns

Objective:To evaluate the association between soft tissue at the chin (STC) thickness and mandibular divergence.Materials and Methods:Nongrowing patients seeking orthodontic treatment (n  =  190; 113 women and 77 men), who had an average age of 26.94 years (range  =  18.10–53.50 years), were stratified in four subgroups based on cephalometric mandibular plane inclination to anterior cranial base (MP/SN): low  =  MP/SN ≤ 27° (n  =  48); medium-low  =  27° < MP/SN ≤ 32° (n  =  60); medium-high  =  32° < MP/SN < 37° (n  =  37); and high  =  MP/SN ≥ 37° (n  =  45). The STC thicknesses were measured at pogonion (Pog), gnathion (Gn), and menton (Me). Group differences were evaluated with two-way analysis of variance and Student''s t-test. The Pearson product moment correlation gauged associations between parameters.Results:The STC values were greater in men than women (P < .02) and were smaller in the high group (7.47 ± 2.42 mm) than in all other groups at Gn (mean values  =  9.00 mm < STC < 9.58 mm; P < .001) and at Me (high group  =  6.30 ± 1.89 mm; other groups  =  7.15 mm < STC< 7.57 mm; P  =  .011).Conclusion:The STC is thinner at Gn and Me in hyperdivergent facial patterns, apparently in contrast to Pog. This differential thickness warrants focused research as it implies that it is possible (1) to vertically grow hard tissues impinging on the inferior soft tissue envelope in patients with severe hyperdivergence and (2) to plan for genioplasty in such patients when more advancement of the chin might be needed to compensate for the increased vertical height.     

Response of the maxillary dentition to a statically determinate one-couple system with tip-back mechanics: A prospective clinical trial

Objective:To quantify the effects of tip-back mechanics on the maxillary first molars and incisors.Materials and Methods:Sixteen subjects with Class II end-on malocclusion were treated with an intrusion arch to achieve distalization of the maxillary molar through tip-back mechanics. Lateral cephalograms were taken prior to molar tip-back (T1), after molar tip-back (T2), and after molar root uprighting (T3). Data were analyzed using the Friedman’s and Wilcoxon signed rank tests to evaluate differences in time points (P ≤ .016).Results:The maxillary first molar distalized 1.53 mm (P = .001) with 6.65° (P = .001) of distal tipping and 0.86 mm (P = .001) of extrusion at T2. Minor relapse of the first molar (mesial direction) was seen at T3. The maxillary incisors flared labially 0.4 mm, and the incisor root apex moved palatally 1.19 mm (P = .005) at T2. At T3, the incisor root apex moved palatally 1.5 mm (P = .003) from T1. An angular change from T1 of 3.31° (P = .008) and 3.53° (P = .014) was seen at T2 and T3, respectively, as a result of palatal root movement of the maxillary incisors.Conclusions:A significant amount of distalization of maxillary molars was attained at the crown level with tip-back mechanics. Palatal root angulation change was significant in the incisors with minimal anteroposterior movement of the incisal edge.     

Velopharyngeal changes after maxillary distraction in cleft patients using a rigid external distraction device: A retrospective study

Objective:To evaluate early and late velopharyngeal changes in cleft lip and palate (CLP) patients after use of the Rigid External Distractor (RED) device and to correlate these changes to the amount of maxillary advancement.Materials and Methods:Thirty Class III CLP patients were included in the study. Maxillary advancement was performed using the RED device in combination with titanium miniplates and screws for anchorage. Lateral cephalograms, nasometer, and nasopharyngoscope records were taken before distraction, immediately after distraction, and 1 year after distraction. A paired t-test was used to detect differences at P < .05.Results:SNA angle and A point and ANS to Y axis were significantly increased after maxillary distraction (P  =  .0001). Statistically significant increases in nasopharyngeal and oropharyngeal depths, velar angle, and need ratio were also found (P  =  .0001). Nasalance scores showed a significant increase (P  =  .008 for nasal text and .044 for oral text). A significant positive correlation was observed between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality (P  =  .012 and .026, respectively).Conclusions:Nasopharyngeal function was deteriorated after maxillary advancement in CLP patients. There was a significant positive correlation between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality.     

CBCT of skeletal changes following rapid maxillary expansion to increase arch-length with a development-dependent bonded or banded appliance

Objective:To assess the three-dimensional (3D) skeletal response to a standardized 5 mm of rapid maxillary expansion (RME) in growing children (6–15 years) with maxillary width deficiency and crowding.Materials and Methods:A bonded appliance was used prior to the eruption of the maxillary first premolars (Mx4s), and a banded appliance was used thereafter. A consecutive sample of 89 patients (29 boys and 60 girls) from a large pediatric dentistry and orthodontics practice was divided into four groups: 1) 6–8 years old (n  =  26), 2) 9–11 years old with unerupted Mx4s (n  =  21), 3) 9–11 years with erupted Mx4s (n  =  23), and 4) 12–15 years (n  =  19). For all patients, the 3D evaluation of dental and skeletal effects was performed with cone-beam computed tomography (CBCT).Results:For both appliances in all patients, CBCT confirmed a triangular pattern of expansion in both the frontal and sagittal planes. Overall, both appliances produced significant maxillary expansion (>80% of the 5-mm activation), but older children showed a progressively more dental (less skeletal) response. Comparison of the two types of expanders in the crossover sample, children aged 9–11 years, showed that the bonded RME produced the most efficient skeletal expansion in the preadolescent sample. Increased maxillary width at the level of the zygomaticomaxillary suture was the best indicator for development of maxillary arch circumference.Conclusion:Development-dependent appliances (bonded RPE before Mx4s erupt, and a banded device thereafter) provided optimal RME treatment for all children from age 6–15 years.     

Skeletal and dental effects of molar distalization using a modified palatal anchorage plate in adolescents

Objective:To evaluate and compare skeletal effects and the amount of molar distalization in maxilla using modified palatal anchorage plate (MPAP) vs headgear appliances in adolescent patients.Materials and Methods:Pre- and posttreatment lateral cephalograms of 45 Class II malocclusion patients were analyzed; 24 were treated with MPAP appliances (age, 12.4 years) and 21 with headgear (age, 12.1 years). Fixed orthodontic treatment started with the distalization process in both groups. Thirty-two variables were measured and compared between both groups using multivariate analysis of covariates.Results:There was no significant main effect of the appliance type on the treatment results (P  =  .063). Also, there was no significant main effect of the appliance type on both pre- and posttreatment comparisons (P  =  .0198 and .135, respectively). The MPAP and headgear groups showed significant distalization of maxillary first molars (3.06 ± 0.54 mm and 1.8 ± 0.58 mm, respectively; P < .001). Sagittal skeletal maxillomandibular differences were improved after treatment (P < .001), with no significant differences between the two groups. No significant difference in treatment duration was found between the groups.Conclusions:The MPAP showed a significant skeletal effect on the maxilla. Both MPAP and headgear resulted in distalization of maxillary first molars. Therefore, it is recommended that clinicians consider the application of MPAP, especially in noncompliant Class II patients.     

Nonsurgical miniscrew-assisted rapid maxillary expansion results in acceptable stability in young adults

Objective:To evaluate the stability of nonsurgical miniscrew-assisted rapid maxillary expansion (MARME) in young adults with a transverse maxillary deficiency.Materials and Methods:From a total of 69 adult patients who underwent MARME followed by orthodontic treatment with a straight-wire appliance, 20 patients (mean age, 20.9 ± 2.9 years) with follow-up records (mean, 30.2 ± 13.2 months) after debonding were selected. Posteroanterior cephalometric records and dental casts were obtained at the initial examination (T0), immediately after MARME removal (T1), immediately after debonding (T2), and at posttreatment follow-up (T3).Results:Suture separation was observed in 86.96% of subjects (60/69). An increase in the maxillary width (J-J; 1.92 mm) accounted for 43.34% of the total expansion with regard to the intermolar width (IMW) increase (4.43 mm; P < .001) at T2. The amounts of J-J and IMW posttreatment changes were −0.07 mm (P > .05) and −0.42 mm (P  =  .01), respectively, during retention. The postexpansion change in middle alveolus width increased with age (P < .05). The postexpansion change of interpremolar width (IPMW) was positively correlated with the amount of IPMW expansion (P < .05) but not with IMW. The changes of the clinical crown heights in the maxillary canines, first premolars, and first molars were not significant at each time point.Conclusions:Nonsurgical MARME can be a clinically acceptable and stable treatment modality for young adults with a transverse maxillary deficiency.     

Comparison of tooth development stage of the maxillary anterior teeth before and after secondary alveolar bone graft: Unilateral cleft lip and alveolus vs unilateral cleft lip and palate

Objective:To compare the effect of secondary alveolar bone graft (SABG) on the tooth development stage of the maxillary central incisor (MXCI) and maxillary canine (MXC) in terms of the severity of unilateral cleft.Materials and Methods:The subjects consisted of 50 boys with unilateral cleft lip and alveolus (UCLA) or unilateral cleft lip, alveolus, and palate (UCLP). The age- and sex-matched subjects were divided into group 1 (UCLA, n = 25; 9.3 ± 0.8 years old) and group 2 (UCLP, n = 25; 9.4 ± 0.6 years old). In panoramic radiographs taken 1 month before (T0) and 1 year after SABG (T1), tooth development stage was evaluated according to the Nolla developmental (ND) stage. A panoramic radiograph taken 3 years after SABG was used as a reference for the final root length of individual tooth.Results:In groups 1 and 2, the ND stage of the MXCI did not exhibit differences between the cleft and non-cleft sides at T0 and T1, respectively. However, although the ND stage of the MXC of group 2 was delayed on the cleft side compared with the non-cleft side at T0 (P < .05), the MXC on the cleft side developed faster than that on the non-cleft side after SABG (P < .01). In terms of tooth development speed, group 2 showed a higher rate of faster developed MXCs on the cleft side compared with the non-cleft side after SABG than group 1 (36.0% vs 8.0%, P < .05).Conclusion:SABG performed at approximately 9 years of age might increase tooth development speed of MXC in patients with UCLP compared with patients with UCLA.