Response of the maxillary dentition to a statically determinate one-couple system with tip-back mechanics: A prospective clinical trial

Objective:To quantify the effects of tip-back mechanics on the maxillary first molars and incisors.Materials and Methods:Sixteen subjects with Class II end-on malocclusion were treated with an intrusion arch to achieve distalization of the maxillary molar through tip-back mechanics. Lateral cephalograms were taken prior to molar tip-back (T1), after molar tip-back (T2), and after molar root uprighting (T3). Data were analyzed using the Friedman’s and Wilcoxon signed rank tests to evaluate differences in time points (P ≤ .016).Results:The maxillary first molar distalized 1.53 mm (P = .001) with 6.65° (P = .001) of distal tipping and 0.86 mm (P = .001) of extrusion at T2. Minor relapse of the first molar (mesial direction) was seen at T3. The maxillary incisors flared labially 0.4 mm, and the incisor root apex moved palatally 1.19 mm (P = .005) at T2. At T3, the incisor root apex moved palatally 1.5 mm (P = .003) from T1. An angular change from T1 of 3.31° (P = .008) and 3.53° (P = .014) was seen at T2 and T3, respectively, as a result of palatal root movement of the maxillary incisors.Conclusions:A significant amount of distalization of maxillary molars was attained at the crown level with tip-back mechanics. Palatal root angulation change was significant in the incisors with minimal anteroposterior movement of the incisal edge.     

Dental crowding: The role of genetics and tooth wear

Objective:To evaluate the role of genetics and tooth wear in the etiology of dental crowding through the analysis of a split indigenous Amazon population.Materials and Methods:Dental crowding prevalence (n  =  117), tooth wear (n  =  117), and inbreeding coefficient (n  =  288) were compared for both villages. A biometric investigation was performed by dental cast analysis of 55 individuals with no tooth loss. Mann-Whitney statistics, independent t-tests, and Fisher exact tests were used at P < .05.Results:A high coefficient of inbreeding was confirmed in the resultant village (F  =  0.25, P < .001). Tooth wear was not significantly different (P  =  .99), while a significantly higher prevalence of dental crowding was confirmed in the original village (PR  =  6.67, P  =  0.02). Forty dental arches (n  =  20) were examined in the new group, and only one (2.5%) had a dental crowding ≥5 mm. In the original villages, we found 20 arches (28.6%) with dental crowding. No difference was observed for tooth size, while larger dental arch dimensions explained a lower level of dental crowding in the resultant village.Conclusions:Our findings downplay the widespread influence of tooth wear, a direct evidence of what an individual ate in the past, on dental crowding and emphasize the role of heredity, exacerbated through inbreeding, in the etiology of this malocclusion.     

The effect of changes in primary attending doctor coverage frequency on orthodontic treatment time and results

Objective:To determine whether changes in primary attending (PA) doctor coverage frequency caused an increase in orthodontic treatment time or a decrease in the quality of treatment results in a postgraduate orthodontic clinic. The effect of T1 Peer Assessment Rating (PAR) scores on PA doctor coverage frequency, treatment times, and results was also evaluated.Materials and Methods:A sample of 191 postorthodontic subjects was divided into three groups based on PA doctor coverage (high, medium, or low). Treatment times, treatment results, and other variables were compared between the three PA coverage groups. Additionally, the sample was divided into three groups based on T1 PAR scores. Attending coverage frequency, treatment times, and results were compared between the T1 PAR groups.Results:No statistically significant differences were found in treatment time (P  =  .128) or results (P  =  .052). There were no statistically significant differences in the mean scores for T1 PAR (P  =  .056), T2 PAR (P  =  .602), patient age at T1 (P  =  .747), total appointments (P  =  .128), missed appointments (P  =  .177), or cancelled appointments (P  =  .183). Statistically significant differences were found between the low T1 PAR group and the medium and high T1 PAR groups (attending coverage, P  =  .008; results, P < .001; treatment time, P  =  .001).Conclusions:Under the conditions of this study, variations in PA doctor coverage frequency did not lengthen orthodontic treatment or reduce the quality of treatment results. Low T1 PAR scores were associated with less PA coverage, less change in PAR, and shorter treatment times.     

Dentoskeletal changes following mini-implant molar intrusion in anterior open bite patients

Objective:To evaluate skeletal and dental changes after intrusion of the maxillary molars in subjects with anterior open bite.Materials and Methods:This retrospective cephalometric study evaluated skeletal and dental changes resulting from the use of maxillary orthodontic mini-implants in 31 consecutively treated patients. Radiographs were taken at the start and end of maxillary molar intrusion to evaluate the associated changes. Statistical analysis was performed using a one-sample t-test.Results:The mean treatment observation time was 1.31 years (SD  =  2.03). The maxillary first molars (P  =  0.0026) and second molars (P  =  0.039) were intruded. However, the mandibular first molars (P  =  0.0004) and second molars (P  =  0.003) erupted in adolescent patients. Both the maxillary and mandibular first molars inclined distally (P  =  0.025 and P  =  0.044, respectively). The mandibular plane angle decreased (P  =  0.036), lower facial height decreased (P  =  0.002), and the occlusal plane angle increased (P  =  0.009). The overbite increased (P < .0001). The ANB angle decreased (P < .0001). Mandibular dental and skeletal changes were more apparent in adolescents, while adults tended toward maxillary changes.Conclusions:Vertical traction from orthodontic mini-implants reduces the maxillary posterior dentoalveolar height, thereby assisting orthodontic closure of anterior open bite. However, simultaneous eruption or extrusion of the mandibular molars should be controlled. Adolescent patients tend to demonstrate more favorable effects of mandibular autorotation than do adults.     

Effect of post–orthognathic surgery condylar axis changes on condylar morphology as determined by 3-dimensional surface reconstruction

Objective: To evaluate the effect of postoperative condylar axis changes on mandibular condylar remodeling by comparing the condylar head in three-dimensional (3D) surface reconstructions before and after surgery in skeletal Class III deformities (one-jaw [mandibular setback] or two-jaw surgery), and also to determine the relationship between condylar inward rotation and condylar surface remodeling after orthognathic surgery.Materials and Methods:A retrospective analysis was conducted of 30 patients with skeletal Class III deformities who had received orthognathic surgery. Group 1 underwent one-jaw surgery (10 men, five women, age 22.4 ± 3.3 years), and group 2 underwent two-jaw surgery (10 men, five women, age 22.3 ± 2.2 years). Sixty condyles were reconstructed and superimposed pre- and postoperatively to compare the changes of condylar surfaces. The relation between the condylar axis change and the surface change using the Pearson correlation were investigated from the 3D image software.Results:Condylar surface changes before and after the surgery were significant. The postoperative inward rotation of the condyles was correlated with the average absolute deviation of the condyles, regardless of the surgery type (one- or 2-jaw surgery; r  =  .70, P < .05).Conclusion:After orthognathic surgery, condylar surface changes occurred, and condylar inward rotation was closely related to changes of condylar surface.     

Influence of unilateral maxillary first molar extraction treatment on second and third molar inclination in Class II subdivision patients

Objective:To assess the maxillary second molar (M2) and third molar (M3) inclination following orthodontic treatment of Class II subdivision malocclusion with unilateral maxillary first molar (M1) extraction.Materials and Methods:Panoramic radiographs of 21 Class II subdivision adolescents (eight boys, 13 girls; mean age, 12.8 years; standard deviation, 1.7 years) before treatment, after treatment with extraction of one maxillary first molar and Begg appliances and after at least 1.8 years in retention were retrospectively collected from a private practice. M2 and M3 inclination angles (M2/ITP, M2/IOP, M3/ITP, M3/IOP), constructed by intertuberosity (ITP) and interorbital planes (IOP), were calculated for the extracted and nonextracted segments. Random effects regression analysis was performed to evaluate the effect on the molar angulation of extraction, time, and gender after adjusting for baseline measurements.Results:Time and extraction status were significant predictors for M2 angulation. M2/ITP and M2/IOP decreased by 4.04 (95% confidence interval [CI]: −6.93, 1.16; P  =  .001) and 3.67 (95% CI: −6.76, −0.58; P  =  .020) in the extraction group compared to the nonextraction group after adjusting for time and gender. The adjusted analysis showed that extraction was the only predictor for M3 angulation that reached statistical significance. M3 mesial inclination increased by 7.38° (95% CI: −11.2, −3.54; P < .001) and 7.33° (95% CI: −11.48, −3.19; P  =  .001).Conclusions:M2 and M3 uprighting significantly improved in the extraction side after orthodontic treatment with unilateral maxillary M1 extraction. There was a significant increase in mesial tipping of maxillary second molar crowns over time.     

Laterality of Asymmetry in Movements of the Corners of the Mouth during Voluntary Smile

Objectives:To examine (1) the laterality of asymmetry in movements of the right and left corners of the mouth in space during voluntary smile and (2) the laterality of asymmetry in relation to the difference between the right and left hemiface size and the handedness.Materials and Methods:Participants were 155 volunteer Japanese female adults. They were categorized into the symmetric group (n  =  120) and the right-side hemiface dominant group (n  =  26) according to the hemiface size. In addition, the symmetric group was categorized into the right-handed group (n  =  98) and the left-handed group (n  =  22) according to the Edinburgh Handedness Inventory. Position vectors of the right and left corners of the mouth were obtained from the three-dimensional facial images for the rest, the maximal lip corner retraction, and the portrait smile. The displacements of the right and left corners of the mouth for each expression and the proportions of the subjects with the right- and left-sided laterality were compared.Results:The left corner of the mouth showed significantly greater displacement (P < .01) than the right in the symmetric group for the portrait smile. The left-sided laterality was found regardless of the handedness.Conclusions:Displacements of the right and left corners of the mouth during voluntary smile were asymmetric, and the left-sided laterality was found. Also, the laterality of the facedness differed in relation to the hemiface size, but was not related to the handedness.     

Effect of posterior impaction and setback of the maxilla on retropalatal airway and velopharyngeal dimensions after two-jaw surgery in skeletal Class III patients

Objective:To evaluate the changes in retropalatal airway and velopharyngeal dimensions after posterior impaction (PI) only or PI and setback (PI/SB) of the maxilla in patients with skeletal Class III undergoing two-jaw surgery.Materials and Methods:Subjects consisted of 60 Class III patients treated with two-jaw surgery. They were divided into two groups: group 1 (n  = 30; PI of the maxilla; mean  =  2.6 mm) and group 2 (n = 30; PI/SB of the maxilla; mean  =  2.8 mm and 1.8 mm, respectively). Using three dimensional computed tomography images taken 1month before surgery (T0) and at least 6 months after surgery (T1), retropalatal airway volume, minimum cross-sectional area, and lateral and anteroposterior (AP) dimensions of minimum cross-sectional area, soft palate angle, soft palate length, and pharyngeal depth were measured. A paired t-test and independent t-test were used for statistical analysis.Results:Group 1 showed increase in retropalatal airway volume and minimum cross-sectional area (P < .01 and P < .05, respectively). Group 2 exhibited decrease in retropalatal airway volume, minimum cross-sectional area, and lateral and AP dimensions of minimum cross-sectional area (all P < .01). Although groups 1 and 2 showed an increase in soft palate length (P < .01 and P < .001, respectively), pharyngeal depth significantly increased only in group 1 (P < .01). Groups 1 and 2 were significantly different in retropalatal airway volume, minimum cross-sectional area, and AP dimension (P < .05, P < .001, and P < .05, respectively).Conclusion:Because the direction of surgical movement in the maxilla can determine the changes in the retropalatal airway and velopharyngeal dimensions, it is recommended that clinicians investigate whether patients suffer from sleep-related breathing disorders before performing PI/SB of the maxilla.     

Three-dimensional analysis of molar compensation in patients with facial asymmetry and mandibular prognathism

Objective:To evaluate the characteristic transverse dental compensations in patients with facial asymmetry and mandibular prognathism and to compare features of dental compensations between two types of mandibular asymmetry using 3-dimensional (3D) cone-beam computed tomography (CBCT).Materials and Methods:Seventy-eight adult patients with skeletal Class I (control group; n  =  33; 19 men and 14 women) or skeletal Class III with facial asymmetry (experimental group; n  =  45; 23 men and 22 women) were included. The experimental group was subdivided into two groups according to the type of mandibular asymmetry: translation type (T-type; n  =  20) and roll type (R-type; n  =  19). CBCT images were acquired before orthodontic treatment and 3D analyses were performed.Results:The transverse dental distance was significantly different between the two groups only at the palatal root apex of the maxillary first molar (P < .05). In the experimental group, the first molar axes were compensated significantly on both arches except the maxillary nondeviated side. The vertical molar heights were different between the two groups only on the maxillary arch (P < .001). The R-type showed greater mandibular ramal length difference and menton deviation than the T-type (P < .001). In the R-type, transverse compensation of the maxillary first molars was more obvious than with the T-type, which resulted in canting in the maxillary occlusal plane.Conclusions:Mandibular asymmetry with prognathism showed a characteristic transverse dental compensation pattern. The mandibular asymmetry type influenced the amount and direction of molar compensation on the maxillary arch.     

Debris,Roughness and Friction of Stainless Steel Archwires Following Clinical Use

Objective:To investigate the degree of debris, roughness, and friction of stainless steel orthodontic archwires before and after clinical use.Materials and Methods:For eight individuals, two sets of three brackets (n  =  16) each were bonded from the first molar to the first premolar. A passive segment of 0.019- × 0.025-inch stainless steel archwire was inserted into the brackets and tied by elastomeric ligature. Debris level (via scanning electron microscopy), roughness, and frictional force were evaluated as-received and after 8 weeks of intraoral exposure. Mann-Whitney, Wilcoxon signed-rank, and Spearman correlation tests were used for statistical analysis at the .05 level of significance.Results:There were significant increases in the level of debris (P  =  .0004), roughness of orthodontic wires (P  =  .002), and friction (P  =  .0001) after intraoral exposure. Significant positive correlations (P < .05) were observed between these three variables.Conclusion:Stainless steel rectangular wires, when exposed to the intraoral environment for 8 weeks, showed a significant increase in the degree of debris and surface roughness, causing an increase in friction between the wire and bracket during the mechanics of sliding.     

Assessing anteroposterior basal bone discrepancy with the Dental Aesthetic Index

Objective:To investigate dental appearance and cephalometric features, using a sample of orthognathic and/or orthodontic patients. A special interest was to identify the relationship of the Dental Aesthetic Index (DAI) with anteroposterior basal bone discrepancy (APBBD) and cephalometric indicators.Materials and Methods:A full sample of 159 patients in two Japanese hospitals was used. Each patient was assessed with a preorthodontic dental cast and cephalometric radiography.Results:Malocclusion with APBBD was more prevalent among high DAI subjects (P  =  .034, OR  =  1.04, 95% CI: 1.00–1.08), Class III malocclusion patients (P  =  .048, OR  =  2.32, 95% CI: 1.01–5.34) and male patients (P  =  .008, OR  =  2.96, 95% CI: 1.33–6.61). Participants scoring 88 points (the highest score in this sample) of the DAI had 16.84 times the risk of APBBD of those who scored 17 points (the lowest score in this sample). Patients with APBBD presented with a greater adjusted ANB angle (t  =  −8.10, P < .001) and a larger adjusted A-B/NF appraisal (t  =  −9.65, P < .001). The SNA angle (P < .001), the SNB angle (P  =  .002), the adjusted ANB angle (P  =  .001), and the adjusted A-B/NF appraisal (P  =  .035) were associated with DAI scores in cubic regression models.Conclusion:This study has demonstrated a relationship between the DAI and APBBD. Feasibility of using the adjusted ANB angle and the adjusted A-B/NF appraisal to assess severity of APBBD has been confirmed. The DAI may provide a supportive method to evaluate orthognathic needs. Future investigations are indicated.     

Skeletal and Soft Tissue Point A and B Changes Following Orthodontic Treatment of Nepalese Class I Bimaxillary Protrusive Patients

Objectives:To test the hypothesis that there is no correlation in the interrelationships of skeletal and soft tissue points A and B with anterior teeth retraction.Materials and Methods:Thirty adult Class I bimaxillary protrusion patients treated with preadjusted appliances after first premolar extraction were included. Pretreatment and posttreatment variables were compared using paired t-test, and the relationship of soft and hard tissue variables was studied using Pearson correlation coefficient and linear regression equation.Results:Mean point A and soft tissue point A (sA) were retracted 2.7 mm (P < .001) and 1.7 mm (P < .001), and mean point B and soft tissue point B (sB) were retracted 2.1 mm (P < .001) and 1.2 mm (P < .001), respectively. Mean ratio of retraction of point A with sA and point B with sB was 1.5∶1 and 1.7∶1, respectively. A significant degree of correlation existed between retraction of point A and soft tissue point A (r  =  0.648, P < .01) and point B and soft tissue point B (r  =  0.806, P < .01). Linear regression analysis used to predict the changes in sA and sB showed significant relationship between point A and sA (r  =  0.543, F  =  11.7, R²  =  0.29, P < .001) and point B and sB (r  =  0.825, F  =  59.7, R²  =  0.68, P < .001). Decreases in hard and soft tissue convexity were due to the retraction of the skeletal and soft tissue points A and B in addition to the lips retraction.Conclusions:The hypothesis is rejected. Retraction of skeletal point A and B lead to retraction of sA and sB under controlled root positions. Nearly proportionate changes existed in the skeletal points and overlying corresponding soft tissue points.     

Changes in temporomandibular joint disc position and form following Herbst and fixed orthodontic treatment

Objective:To determine the changes in the position and form of the temporomandibular joint articular disc in adolescents with Class II division 1 malocclusion and mandibular retrognathism treated with the Herbst appliance (phase I) and fixed orthodontic appliance (phase II).Materials and Methods:Thirty-two consecutive adolescents went through phase I of treatment and 23 completed phase II. The temporomandibular joints were evaluated qualitatively by means of magnetic resonance images at the beginning of treatment (T1), during phase I (T2), at the end of phase I (T3), and at the end of phase II (T4).Results:Significant changes in disc position were not observed with the mouth closed between T1 × T3 (P  =  .317), T3 × T4 (P  =  .287), or T1 × T4 (P  =  .261). At T2, on average, the disc was positioned regressively. With the mouth open, no difference was observed between T1 × T3 (P  =  .223) or T1 × T4 (P  =  .082). We did observe a significant difference between T3 × T4 (P < .05). Significant changes in the disc form were found with the mouth closed between T1 × T2 (P < .001) and T2 × T3 (P < .001).Conclusions:At the end of the two-phase treatment, in general terms, the position and form of the initial articular discs were maintained; however, in some temporomandibular joints some seemingly adverse effects were observed at T4.     

Patient attitudes toward retention and perceptions of treatment success

Objective:To discern patients'' opinions regarding responsibility for orthodontic retention and to determine whether patient attitudes toward retention are related to perceptions of treatment success.Materials and Methods:Questionnaires regarding orthodontic retention were distributed to first-year undergraduate college students (n  =  158), first-year dental students (n  =  183), and retention patients at orthodontic offices (n  =  214). Items included treatment satisfaction, perceived responsibility for retention, type of retainer prescribed, reasons for discontinuing use of retainers, and relapse experienced.Results:Four hundred twenty-eight of 555 participants indicated that they had received orthodontic treatment. Most indicated they were either “satisfied” or “very satisfied” with their teeth, both at the end of treatment (96%) and currently (84%). There was a strong relationship between the perception of stability of tooth position and current satisfaction level (P < .0001). Most individuals (88%) indicated that they themselves were responsible for maintaining the alignment and fit of their teeth. Those who indicated that someone else was responsible were nearly twice as likely to be dissatisfied with their teeth (P  =  .0496). Patients who had been prescribed clear, invisible retainers were significantly more likely to be “very satisfied” currently (50%) compared to those with Hawley (35%) or permanently bonded (36%) retainers (P  =  .0002). Patients with Hawley retainers were significantly less likely to be wearing them currently as prescribed (45%) than those with invisible (65%) or bonded (68%) retainers (P < .0001).Conclusions:Satisfaction with orthodontic results after treatment is related to patient perceptions of responsibility for retention and perceived stability of tooth position. Patients should play a contributory role in formulating orthodontic retention plans.     

Treatment Effects of Twin-Block and Mandibular Protraction Appliance-IV in the Correction of Class II Malocclusion

Objective:To evaluate the treatment effects of twin-block and Mandibular Protraction Appliance-IV (MPA-IV) in the treatment of Class II division 1 malocclusion.Methods:Fifty North Indian girls with Class II division 1 malocclusion, in the age range of 9–13 years, were chosen. The subjects were divided among a control group (n  =  10), a twin-block group (n  =  25), and an MPA group (n  =  15). Pre–follow-up and post–follow-up lateral cephalograms of control subjects and pretreatment and posttreatment lateral cephalograms of the treatment subjects were traced manually and subjected to a pitchfork analysis.Results:Neither twin-block nor MPA-IV significantly restricted the forward growth of maxilla. Mandibular growth and improvement in the sagittal skeletal relation were significantly greater in the twin-block subjects. Distal movement of the maxillary dentition and mesial movement of the mandibular dentition were more prominent in the MPA-IV subjects. Molar correction and overjet reductions were significantly greater in the treatment subjects (P < .001).Conclusion:Twin-block and MPA-IV were effective in correcting the molar relationships and reducing the overjet in Class II division 1 malocclusion subjects. However, twin-block contributed more skeletal effects than MPA-IV for the correction of Class II malocclusion.     

Analysis of smile esthetics in American Board of Orthodontic patients

Objective:To investigate the common denominators of an esthetically pleasing smile in patients who were considered to be successfully treated upon the submission to American Board Orthodontics (ABO) clinical examination.Material and Methods:A total of 462 patients were examined. Ninety subjects that fulfilled the inclusion criteria were included. Standardized digital smile photographs of the subjects were rated by 30 panel members, including orthodontists, general dentists, and parents of orthodontic patients, using a numeric version of the visual analog scale. Three groups were formed using the mean esthetic score ± standard deviation range: unattractive (n  =  21), average (n  =  47), and attractive (n  =  22) smiles. Eleven smile characteristics were digitally measured on the photographs and compared between the groups using one-way analysis of variance and χ² tests. Additionally, regression analyses were used to investigate the association of the smile characteristics with the esthetic score.Results:A significant difference was found between the three groups for the comparison of smile arc relationship (P < .001). When all the variables used in this study were entered in the regression analysis, a positive association was found (r  =  0.658; r²  =  0.434; P < .001). Additionally, two models were defined using stepwise regression. The first model included the smile arc (r  =  0.478; r²  =  0.228; P < .001), and the second model had both the smile arc and right gingival display/visible dentition display ratio (r  =  0.567; r²  =  0.321; P < .001).Conclusions:A harmonious smile arc relationship and less gingival display during a smile are significantly associated with smile attractiveness in patients considered successfully treated according to ABO standards.     

In vitro and in vivo mechanical stability of orthodontic mini-implants: Effect of sandblasted,large-grit,and anodic-oxidation vs sandblasted,large-grit,and acid-etching

Objective:To compare in vivo and in vitro mechanical stability of orthodontic mini-implants (OMIs) treated with a sandblasted, large-grit, and anodic-oxidation (SLAO) method vs those treated with a sandblasted, large-grit, and acid-etching (SLA) method.Materials and Methods:Fifty-four titanium OMIs (cylindrical shape, drill-free type; diameter  =  1.45 mm, length  =  8 mm, Biomaterials Korea Inc, Seoul, Korea) were allocated into control, SLA, and SLAO groups (N  =  12 for in vivo and N  =  6 for in vitro studies per group). In vitro study was carried out on a polyurethane foam bone block (Sawbones, Pacific Research Laboratories Inc, Vashon, Wash). In vivo study was performed in the tibias of Beagles (6 males, age  =  1 year, weight  =  10 to 13 kg; OMIs were removed at 8 weeks after installation). For insertion and removal of OMIs, the speed and maximum torque of the surgical engine were set to 30 rpm and 40 Ncm, respectively. Maximum torque (MT), total energy (TE), and near peak energy (NPE) during the insertion and removal procedures were statistically analyzed.Results:In the in vitro study, although the control group had a higher insertion MT value than the SLA and SLAO groups (P < .01), no differences in insertion TE and NPE or in any of the removal variables were noted among the three groups. In the in vivo study, the control group exhibited higher values for all insertion variables compared with the SLA and SLAO groups (MT, P < .001; TE, P < .01; NPE, P < .001). Although no difference in removal TE and removal NPE was noted among the three groups, the SLAO group presented with a higher removal MT than the SLA and control groups (P < .001).Conclusions:SLAO treatment may be an effective tool in reducing insertion damage to surrounding tissue and improving the mechanical stability of OMIs.     

Assessment of pharyngeal airway volume in adolescent patients affected by bilateral cleft lip and palate using cone beam computed tomography

Objective:To test the null hypothesis that there were no significant differences for pharyngeal airway volumes between the adolescent patients affected by bilateral cleft lip and palate (BCLP) and well-matched controls using cone beam computed tomography.Materials and Methods:The study sample consisted of 16 patients (11 female and 5 male; mean [SD] age 14.1 [2.1] years) affected by BCLP and 16 patients (10 female and 6 male; mean [SD] age 13.4 [2.0] years) as age- and sex-matched control group. Craniofacial measurements and pharyngeal airway dimension, area, and volume measurements of patients in both groups were calculated and statistically examined using Student''s t-test and multiple linear regression analyses.Results:Statistically significant differences were found between the BCLP and control groups for SNB (P < .05), SN-GoGn (P < .05), Co-A (P < .05), PAS (P < .01), minAx (P < .01), and oropharyngeal airway volume (P < .05). The most predictive variables for oropharyngeal airway volume were found as PAS (r  =  .655 and P  =  .000) and minAx (r  =  .787 and P  =  .000).Conclusions:The null hypothesis was rejected. Oropharyngeal (P < .05) and total (P > .05) airway volumes were found to be less in the BCLP group, and thus the treatment choice in these patients should have positive effects on the pharyngeal airway.     

Velopharyngeal changes after maxillary distraction in cleft patients using a rigid external distraction device: A retrospective study

Objective:To evaluate early and late velopharyngeal changes in cleft lip and palate (CLP) patients after use of the Rigid External Distractor (RED) device and to correlate these changes to the amount of maxillary advancement.Materials and Methods:Thirty Class III CLP patients were included in the study. Maxillary advancement was performed using the RED device in combination with titanium miniplates and screws for anchorage. Lateral cephalograms, nasometer, and nasopharyngoscope records were taken before distraction, immediately after distraction, and 1 year after distraction. A paired t-test was used to detect differences at P < .05.Results:SNA angle and A point and ANS to Y axis were significantly increased after maxillary distraction (P  =  .0001). Statistically significant increases in nasopharyngeal and oropharyngeal depths, velar angle, and need ratio were also found (P  =  .0001). Nasalance scores showed a significant increase (P  =  .008 for nasal text and .044 for oral text). A significant positive correlation was observed between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality (P  =  .012 and .026, respectively).Conclusions:Nasopharyngeal function was deteriorated after maxillary advancement in CLP patients. There was a significant positive correlation between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality.