Kinematic and torque-related effects of dorsally angulated distal radius fractures and the distal radial ulnar joint

PURPOSE: The purpose of this study was to examine the torque required to achieve a full range of motion of the distal radioulnar joint (DRUJ) as a result of increasing dorsal angulation from simulated fractures of the distal radius. Based on this study the accepted amount of dorsal angulation of the distal radius can be determined. METHODS: In 9 fresh cadaver limbs motion of the DRUJ was simulated by a custom motion and loading forearm device. The malunion model of the distal radius was controlled by a specially designed external fixation frame that provided control in 6 degrees of dorsal angulations (N, 0 degrees, 10 degrees, 20 degrees, 30 degrees, and 40 degrees ). The study included an intact and nonintact triangular fibrocartilage complex. RESULTS: This study showed that torque across the DRUJ was affected by the degree of simulated malunion of the distal radius. With more than 30 degrees dorsal angulation the torque across the DRUJ was increased in both muscle loading and unloading conditions. Although significance was not noted, with resistive loading this study showed torque changes with as little as 10 degrees malunion of the distal radius. CONCLUSIONS: We conclude that reduction of distal radius fractures to within 10 degrees of dorsal angulation is needed to allow patients to maintain full forearm and wrist rotation.     

Sigmoid notch reconstruction and limited carpal arthrodesis for a severely comminuted distal radius malunion: case report

We present the case of a young patient with a severely comminuted, malunited, intra-articular distal radius fracture and complete disruption of the sigmoid notch. We reconstructed the malunited distal radioulnar joint by osteotomy and repositioning the displaced sigmoid notch fragments through a combined dorsal and volar approach. At the same time, we carried out a radioscapholunate arthrodesis with distal scaphoid excision. We used a free vascularized corticoperiosteal flap from the medial femoral condyle to span the massive bone defect in the radius to obtain union. At the 2.5-year follow-up, the patient had essentially normal function of the distal radioulnar joint (painless, with 85° of active pronation and 75° of supination). He resumed work as a bricklayer without limitations. We conclude that sigmoid notch reconstruction by osteotomy is worthwhile in the setting of malunited distal radius whether or not the radiocarpal joint is reconstructable.     

Distal radius malunions in flexion

AIMS: In this paper we will differentiate the clinical management of distal radial fractures with malunion in extension from those with malunion in flexion. Malunions in flexion are rare and radial shortening does not contribute significantly to the deformity. There is always a decrease in the range of motion, especially prono-supination. Besides the usual causes of these malunions, a new iatrogenic cause is becoming prevalent: malunion in flexion occurs when a fracture in extension is treated by posterior intrafocal pinning but the surgery is performed poorly or performed when it is contra-indicated because of volar comminution. PATIENT AND METHODS: We report a retrospective study of 20 cases of distal radius malunion in flexion. The series includes relatively young patients with a mean age of 39.3 of age (24-66). Three types of surgery are compared: 1) an isolated radius extension osteotomy (group 1); 2) an isolated procedure on the ulna (group 2); 3) combined procedures on radius and ulna (Group 3). RESULTS: Results of the three techniques on prono-supination are almost the same, resulting in an almost normal range of motion. Pain decreased from 2.1 (pain for significant strains) to 0.7 (no or climatic pain) in a five-scale classification from 0 to 4. Strength increased by 23% to reach 83.3% of the opposite side. Some differences with malunions in extension should be noted: 1) volar carpal subluxation relative to the radius is present in less than 1/3 of the cases (6/20); 2) adaptive carpus is very rare and independent of the volar displacement (2/20), 3) palmar flexion exists without significant shortening (bone graft rarely necessary); 4) Pronation of the distal fragment results in distal radioulnar joint incongruity. INDICATIONS: The best treatment for young patients is combined radial and ulnar osteotomy. Although a more radical procedure, it is worthwhile for the younger patient in order to recover normal anatomy. Isolated radial osteotomy may be sufficient if pronosupination and radioulnar joint congruity are regained. However, isolated procedures on the distal ulna are only indicated in the elderly, or in patients with little discomfort.     

Three-dimensional in vivo kinematics of the distal radioulnar joint in malunited distal radius fractures

How malunion of the distal radius affects the kinematics of the distal radioulnar joint in vivo was evaluated. A novel computed tomography image-based technique was used to quantify radioulnar motion in both wrists of 9 patients who had unilateral malunited distal radius fractures. In the injured wrists dorsal angulation averaged 21 degrees +/- 6 degrees, radial inclination averaged 18 degrees +/- 5 degrees, and radial shortening averaged 21 +/- 3 mm. Clinically, the average range of motion of the injured wrists was 75 degrees +/- 25 degrees pronation and 73 degrees +/- 23 degrees supination. Kinematics of the radius during pronation and supination in the malunited forearms was indistinguishable from that in the uninjured forearms. In both the axis of rotation of the radius passed through the center of the ulnar head, although it shifted slightly ulnar and volar in supination and radial and dorsal during pronation. In contrast to previous in vitro biomechanical findings, there was no dorsovolar radial translation at the extremes of pronation or supination and no translation of the radius along the rotation axis. Soft tissues may play a larger role in limiting function than previously appreciated, and treatment may require correction of altered soft tissue structures as well as any abnormal bone anatomy.     

A new modification of corrective osteotomy for treatment of distal radius malunion

A new modification of corrective osteotomy for distal radius malunion, which minimizes the need for bone grafting and addresses the constraining aspect of the extensor retinaculum, is described. This new modification uses a volar and dorsal approach to perform an angled step-cut osteotomy, release of the extensor retinaculum, and volar plating. The typically dorsally extruded comminuted fracture fragments from the distal, dorsal compression fracture component of the distal radius fracture is mobilized with the distal fragment and acts as a dorsal strut graft to span the opening wedge, corrective osteotomy. Therefore, this new modification facilitates and improves the realignment of the malunited radius, while minimizing or eliminating the need for bone grafting.     

Simultaneous radial closing wedge and ulnar shortening osteotomies for distal radius malunion

PURPOSE: Closing wedge osteotomies are an attractive treatment option for distal radius malunion in patients with osteopenia; however, they require an ulnar head resection to accommodate closure of corrective osteotomy and to address the issue of ulnocarpal abutment. The literature contains little information on concomitant ulnar shortening osteotomy despite a physiologic solution. We report the functional and radiographic outcomes of 5 patients treated for symptomatic distal radius malunion with simultaneous radial closing wedge and ulnar shortening osteotomies. METHODS: All 5 patients were women aged 52 to 69 years (average, 61 years). Four patients had extra-articular radius fractures with dorsal angulation (20-22 degrees ) and shortening (3-7/mm); the other had the fracture with volar angulation (24 degrees ) and shortening (11 mm). Through a volar approach an appropriate amount of bone wedge was removed from the distal radius. A small volar T-plate was used to secure the osteotomized bone fragment. Six to 11 mm of ulnar shortening osteotomy was performed by using transverse osteotomy and compression plating technique with an AO compression device. RESULTS: In all 5 wrists healing of radial and ulnar osteotomies occurred less than 3 months after surgery. There were no postsurgical complications. Postsurgical radiographs showed that the volar tilt angle of the radius was reduced to normal range (range, 8-15 degrees ) in all wrists. The ulnar variance was 0 mm in 4 wrists and 2 mm in 1 wrist. There were significant improvements in pain, function, and range of motion at an average follow-up evaluation of 17 months. The average grip strength as a percentage of the opposite side improved from 30% before to 73% after surgery. CONCLUSIONS: This study showed that closing wedge osteotomy of the radius concomitant with ulnar shortening osteotomy is technically and functionally adequate. Our procedure is indicated for patients with osteopenia for whom opening wedge osteotomy of the radius is inadequate.     

Rotational deformity in malunited fractures of the distal radius

PURPOSE: To evaluate rotational deformity in malunited fractures of the distal radius and its effect on forearm rotation. METHODS: Thirty-seven patients with a symptomatic malunion of the distal radius (25 with dorsal angulation and 12 with volar angulation) were assessed for rotational deformity of the distal fragment. Spiral computed tomographic scans were taken of both wrists. Rotational deformity was evaluated by comparing the radial torsion angle of the injured and uninjured sides according to Frahm. Multivariable regression analyses were used to identify the radiologic parameter that had the most important influence on forearm rotation. RESULTS: Of the 37 patients, 23 showed a rotational deformity of the distal radius. In both dorsally and volarly angulated malunions, pronation and supination deformities were identified. There was a tendency toward more pronation deformities with volar malunion. Volar angulated malunion with a rotational deformity of less than 10 degrees showed the smallest amount of forearm supination. Losses of pronation-supination did not correlate with the amount of rotational deformity. CONCLUSIONS: This study showed that rotational deformity is common with angulated malunions of the distal radius. The effect on forearm rotation should not be overestimated. Pretreatment computed tomographic scanning of both wrists to identify and measure malrotation of the distal radius may be helpful to improve the outcome after corrective osteotomy.     

Corrective osteotomy for malunion of the distal radius in young and middle-aged patients: an outcome study

INTRODUCTION: We report the outcome of osteotomy for malunion of the distal radius. MATERIAL AND METHODS: Twenty-one wrists in 21 patients (mean age 38 years) with a malunion of the distal radius were treated with an osteotomy. An opening wedge osteotomy was performed when the distal radioulnar joint (DRUJ) could be saved; a closing wedge osteotomy was done when the DRUJ was treated with resection (Darrach) or arthrodesis (Sauvé-Kapandji). The clinical and radiographic outcomes were evaluated together with the DASH score (disability of shoulder and hand). RESULTS: Extension improved to an average of 48 degrees in the Smith-type group and flexion improved to an average of 51.8 degrees in the Colles-type group. The postoperative DASH-score averaged, respectively, 17.3 and 33. There were four poor, four fair, seven good and six excellent scores on the scale of Fernandez and there were four poor, seven fair, three good and seven very good results on the Fernandez point score. Grip strength postoperatively averaged 70% of the contralateral side. Radiographically, there was a correction of increased volar tilt of the articular surface from 30.6 to 4.0 degrees in the Smith-type group and a correction of increased dorsal tilt of the articular surface of 24.6 degrees (from -21.3 to 3.3 degrees) in the Colles-type group. Nine patients had surgery on the distal ulna at the time of the radial correction. Their average DASH score was 16.8 compared to the 33.97 average DASH score of those with radial correction without ulnar surgery. CONCLUSION: Osteotomy of the distal radius in cases of malunion gives favorable outcomes. Treatment of the DRUJ is mandatory.     

Simultaneous radial closing wedge and ulnar shortening osteotomy for distal radius malunion

Closing wedge osteotomies are an attractive treatment option for distal radius malunion in patients with osteopenia. It does not require a separate-site bone graft, result-ing in decreased morbidity. However, this procedure has always been performed in combination with ulnar head resection to accommodate closure of corrective osteotomy and to address the issue of ulnocarpal abutment. Because ulnar shortening osteotomy is more physiological solution, it seemed advantageous to us to combine radial closing wedge osteotomy and ulnar shortening osteotomy. In this article, we present in detail our technique for treating patients with distal radius malunion. The patients are potentially osteopenic such as women aged over 45 years and are active at home, work, and/or recreation but are not involved in heavy physical work. Through volar approach an appropriate bone wedge is removed from the distal radius. A small volar T-plate is used to secure the osteotomized bone fragments. The aim of the radial osteotomy is to correct the dorsal angulation in the sagittal plane within a normal range of 1 degree to 2 degrees with reference to that of opposite wrist. Ulnar shortening osteotomy is performed by using transverse osteotomy and compression plating technique with an AO compression device. The ulnar variance is adjusted to neutral. Although the technique presented requires the surgeons to use careful plate and screw technique, early results have been encouraging, and patients with osteopenia can be treated successfully. Decreased grip strength which may be provoked by shorting of the forearm is acceptable.     

Corrective osteotomy for intra-articular malunion of the distal part of the radius

BACKGROUND: Corrective osteotomy is an appealing treatment for malunited articular fractures of the distal part of the radius since articular incongruity may be the factor most strongly associated with arthrosis and diminished function after such fractures. Enthusiasm for osteotomy has been limited by concerns regarding the difficulty of the technique and the potential for additional injury, osteonecrosis, and nonunion. METHODS: Twenty-three skeletally mature patients were evaluated at an average of thirty-eight months after corrective osteotomy for an intra-articular malunion of the distal part of the radius. The indication for the osteotomy included dorsal or volar subluxation of the radiocarpal joint in fourteen patients and articular incongruity of > or =2 mm as measured on a posteroanterior radiograph in seventeen patients. Six patients had combined intra-articular and extra-articular malunion. The average interval from the injury to the osteotomy was six months. The average maximum step-off or gap of the articular surface prior to the operation was 4 mm. RESULTS: One patient had a subsequent partial wrist arthrodesis because of radiocarpal arthrosis, and three patients had additional surgery because of dysfunction of the distal radioulnar joint. One patient had a rupture of the extensor pollicis longus, which was treated with a tendon transfer. The final articular incongruity averaged 0.4 mm, and the final grip strength averaged 85% of that on the contralateral side. The rate of excellent or good results was 83% according to the rating systems of Fernandez and of Gartland and Werley, and 43% according to a modification of the rating system of Green and O'Brien. CONCLUSIONS: The results of corrective osteotomy for the treatment of intra-articular malunion are comparable with those of osteotomy for the treatment of extra-articular malunion. Intra-articular osteotomy can be performed with acceptable safety and efficacy, it improves wrist function, and it may help to limit the need for salvage procedures such as partial or total wrist arthrodesis.     

Indikation und Ergebnisse der Ulnaverkürzungsosteotomie bei ulnokarpalem Handgelenksschmerz

The ulnar impaction syndrome is proven to be a common source of ulnar sided wrist pain. Ulna-shortening osteotomy represents a successful therapy for this kind of problem, both congenital or posttraumatic positive ulnar variance. Positive variance resulting from a distal radius fracture needs correct dorsal and radial angulation of the radius. In case of congenital positive variance arthroscopic debridement for decompression of the TFCC should be performed first. The adequate correction of the length is the major problem. Disorders of the distal radioulnar joint may result due to overcorrection. Oblique osteotomy using 7-hole-plates is our preferred treatment.     

Complex volar distal radioulnar joint dislocation occurring in a Galeazzi fracture

The Galeazzi fracture-dislocation of the forearm consists of a transverse or short oblique fracture of the radius at the junction of the middle and distal thirds with an associated subluxation or dislocation of the distal radioulnar joint. Anatomic reduction with rigid internal fixation of the radius typically produces anatomic reduction of the distal radioulnar joint and is the favored treatment. At least three cases of a mechanically blocked distal radioulnar joint requiring open reduction through a separate exposure have been reported. In all three cases there was dorsal displacement of the ulna. We report a case of an irreducible volar dislocation of the distal radioulnar joint following open anatomic reduction of the radius.     

Ulnar shortening osteotomy for malunited distal radius fractures: results of a 7-year follow-up with special regard to the grade of radial displacement and post-operative ulnar variance

Introduction

The treatment of ulnar-sided wrist pain after malunited distal radius fractures remains controversial. Radial corrective osteotomy can restore congruity in the distal radioulnar joint (DRUJ) as well as adequate length of the radius. Ulnar shortening osteotomies leave the radius’ angular deformities unchanged, risking secondary DRUJ osteoarthritis. We supposed that, even within the widely accepted limit of 20°, a greater angulation of the radius in the sagittal plane correlates with a higher rate of DRUJ osteoarthritis. Furthermore, we suspected worse results from an ulna shortened to a negative rather than a neutral or positive ulnar variance.

Materials and methods

For this retrospective study, we reviewed 23 patients a mean 7.2 (range 5.6–8.5) years after ulnar shortening osteotomy for malunion of distal radius fractures. We compared 14 patients with up to 10° dorsal or palmar displacement from the normal palmar tilt of 10° to 9 patients with more than 10° displacement, and 15 patients whose post-operative ulnar variance was neutral or positive to 8 who had a negative one.

Results

Ulnar-sided wrist pain decreased enough to satisfy 21 of the 23 patients. Clinical results tended to be better when radial displacement was minor and when post-operative ulnar variance was positive or neutral. A shorter ulna significantly increased the rate of DRUJ osteoarthritis, whereas a greater degree of radial displacement only increased the rate slightly.

Conclusions

Radial corrective osteotomy should be discussed as alternative when displacement of the radius in the sagittal plane exceeds 10°. The ulna should be shortened moderately to reduce the risk of osteoarthritis in the distal radioulnar joint.     

Corrective osteotomy for volar instability of the distal radioulnar Joint associated with radial shaft malunion

Volar instability of the distal radioulnar joint is an uncommon wrist disorder. We report three cases of recurrent volar instability of the distal radioulnar joint secondary to fracture of the radial shaft. In all cases, X-rays showed a volar apex deformity of the radial shaft. Opening wedge osteotomy and iliac bone grafting was performed on the distal diaphysis of the radius instead of on the radial shaft, in order to adjust the distal radioulnar joint more easily. Pre-operative dislocations and painful clunks disappeared in all three patients. However, slight instability of the distal radioulnar joint remained in all cases. Osteoarthritis of the distal radioulnar joint was noted in one patient 31 months after the operation. All of the patients were satisfied with the results and did not desire further operations.     

An anatomic reconstruction of the distal radioulnar ligaments for posttraumatic distal radioulnar joint instability

Fourteen patients with posttraumatic distal radioulnar joint instability were treated with a reconstruction of the distal radioulnar ligaments. The technique is anatomically accurate, is reproducible, and requires less dissection than previously described techniques. Candidates for the procedure had joint instability and an irreparable triangular fibrocartilage complex. Ten patients had bidirectional instability. Two patients had a concurrent corrective osteotomy of the distal radius for a malunion. The procedure restored stability and relieved symptoms in 12 of 14 patients at 1 to 4 years' follow-up evaluation. One patient with a deficient sigmoid notch and one with ulnocarpal ligament injury did not achieve full stability. All patients attained near full pronation and supination. The procedure is an effective treatment for an unstable distal radioulnar joint when its articular surfaces are intact and the other wrist ligaments are functional, and it can be used in combination with a distal radius corrective osteotomy.     

The distal radioulnar joint in relation to the whole forearm.

The functional anatomy of the distal radioulnar joint was studied in relation to the whole forearm, using three fresh-frozen, above-elbow amputation specimens. The specimens demonstrate how the proximal and distal radioulnar joints together form a bicondylar joint of special character. The proximal "condyle," the radial head, rotates axially, whereas the distal "condyle," the ulnar head, is fixed with respect to rotation. The ordinary articulation of a bicondylar joint (pure axial rotation) is thereby changed into pronation-supination. Axial rotation is preserved proximally, while distally the radius swings around the ulnar head. The mobile radius is distally attached to the stable ulnar head by the dorsal and volar radioulnar ligaments, the dorsal ligament being tight for stabilization in supination and the volar ligament being tight in pronation. The ulnar head also serves as a keystone, carrying the load of the radius. Removal of the ulnar head allows the radius to "fall in" towards the ulna, with narrowing of the interosseous space.     

Ulnar-shortening osteotomy after fracture of the distal radius

Summary The ulnar impingement syndrome due to a relatively long ulna is one of the complications of a fracture of the distal radius. We performed ten ulnar-shortening osteotomies to restore distal radioulnar joint congruity. The mean relative ulna length was 4–5 mm. In-sufficient bone healing was encountered in four osteotomies. Replating and cancellous bone grafting was necessary in two cases because of nonunion. The functional outcomes were good in six, fair in two, and poor in two cases. Nonunion and poor functional outcome were related to a malunion of the radius with a volar radiocarpal angle of 20° or 25°. It appeared that incongruity of the distal radioulnar joint favored nonunion.     

Distal radioulnar joint volar instability after ligament reconstruction failure treated with sigmoid notch osteotomy

Because osseous abnormalities result in distal radioulnar joint instability, a sigmoid notch osteotomy is used to restore stability. This article describes a case of distal radioulnar joint volar instability treated with sigmoid notch osteotomy of the volar rim.A 22-year-old man presented with a 9-month history of right wrist pain with volar instability after a fall, which was treated conservatively. He reported a history of remote trauma when he was 7 years old but had been asymptomatic since then. Four months later, he underwent anatomical distal radioulnar joint ligament reconstruction at another hospital after a diagnosis of distal radioulnar joint instability, but the instability had persisted.Computed tomography revealed dynamic volar subluxation of the ulnar head with hypoplasia and a flattened volar lip of the sigmoid notch. Therefore, a sigmoid notch osteotomy of the volar rim was performed. Postoperatively, an above-elbow cast was applied with forearm pronation for 6 weeks. Six months later, the patient had regained 60° of supination and 70° of pronation. He reported minor pain and no instability. Computed tomography scan at 6 months postoperatively revealed union of the osteotomy site and confirmed the maintenance of reduction. The patient returned to work.     

Surgical correction of dorsally angulated distal radius malunions with fixed angle volar plating: a case series

PURPOSE: To report our experience using a fixed-angle volar plate in conjunction with a corrective osteotomy and cancellous bone graft for the treatment of distal radius malunions with dorsal angulation in 4 patients. METHODS: Four consecutive patients had a volarly based opening wedge osteotomy with a fixed angle volar plate and cancellous bone grafting for the treatment of a dorsally angulated distal radius malunion. Data collected retrospectively included a visual analog pain scale, grip strength, range of motion, radiographic parameters, and each patient's subjective functional outcomes as measured by the Disabilities of the Arm, Shoulder, and Hand questionnaire. Motion, strength, and radiographic values were compared with the contralateral arm for each patient. RESULTS: The average time from initial fracture to corrective osteotomy was 346 days. The average length of follow-up evaluation was 13.5 months. The flexion-extension arc of motion increased an average of 21 degrees to a value of 84% of the contralateral side; the pronation-supination arc of motion increased an average of 20 degrees to a value of 98% of the contralateral side. The average tilt of the radius improved from 26 degrees extension to 2 degrees extension; the average radial inclination improved from 22 degrees to 24 degrees; the average ulnar variance excluding the 1 patient who had a distal ulna resection improved from 5 mm to 1 mm. The average retrospective Disabilities of the Arm, Shoulder, and Hand score improved from 30 to 7; the average retrospective visual analog pain scale score improved from 4.5 to 1. The average grip strength increased from 20 to 29 kg, which corresponded to 73% of the contralateral extremity. CONCLUSIONS: The rigid characteristics of fixed angle volar plates can provide an alternative to the traditional techniques of distal radius osteotomy including structural bone grafting and dorsal plate fixation or external fixation. In addition these plates are strong enough to allow for early postoperative motion. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic, Level IV.     

Early corrective osteotomy for a malunited Colles' fracture using volar approach and calcium phosphate bone cement: a case report

We report a case of malunion of the distal radius after a Colles' fracture treated with osteotomy using a volar approach combined with calcium phosphate bone cement grafting of the dorsal defect via a drill hole from the volar cortex 6 weeks after the injury. One year and 4 months after surgery range of motion and grip strength were improved and x-rays of the wrist showed complete union of the distal radius with progressive absorption of the calcium phosphate bone cement.