No linear correlation between pelvic incidence and acetabular orientation: Retrospective observational study

Links between sagittal spinal alignment and acetabular orientation attract considerable research attention with the goal of understanding “hip-spine syndrome.” However, whether pelvic incidence (PI) is related to acetabular orientation remains debatable. The purpose of the present study was to determine

• 1.whether the correlation between PI and acetabular orientation is present in pelvises of young healthy adults, and
• 2.whether the correlation is present in subgroups of sex, or between the left and right pelvis.

We analyzed 100 abdominopelvic computed tomography (CT) scans of skeletally healthy young adults. We measured PI and acetabular orientation with three-dimensional (3D) measurements. The orientation of 200 acetabula was measured using 3D reconstructed models of 100 pelvises in the coordinate system based on the anterior pelvic plane (APP). To quantify the acetabular orientation, the radiographic definitions of anteversion and inclination were used. To examine the correlation between acetabular orientation and PI, Pearson''s correlation was used.The mean PI was 46.9° ± 10.2°, and the mean acetabular orientation 15.3° ± 5.7° anteverted and 37.5° ± 3.9° inclined. While no significant difference in the PI was observed, the average acetabular orientation of female pelvises (anteversion, 17.5° ± 5.6°; inclination, 36.7° ± 3.7°) was more anteverted and less inclined compared to that of male pelvises (anteversion, 13.2° ± 4.9°; inclination, 38.3° ± 3.9°, respectively; P values < .05). The correlation between PI and acetabular orientation was statistically not significant. After division of study group by sex, the linear correlation between PI and acetabular orientation was not statistically supported. The asymmetry of the acetabular orientation between the left and right sides was not significant.The linear relationship between anatomical acetabular orientation and PI was not evident in the normal population. Our finding thus proves the absence of a linear relationship between the upper and lower articular orientation of the pelvic segment and deepens the understanding of the characteristics of acetabular orientation and PI.     

Comparison Between Posterior Short-segment Instrumentation Combined With Lateral-approach Interbody Fusion and Traditional Wide-open Anterior-Posterior Surgery for the Treatment of Thoracolumbar Fractures

The aim of the study was to compare the radiographic and clinical outcomes between posterior short-segment pedicle instrumentation combined with lateral-approach interbody fusion and traditional anterior-posterior (AP) surgery for the treatment of thoracolumbar fractures.Lateral-approach interbody fusion has achieved satisfactory results for thoracic and lumbar degenerative disease. However, few studies have focused on the use of this technique for the treatment of thoracolumbar fractures.Inclusion and exclusion criteria were established. All patients who meet the above criteria were prospectively treated by posterior short-segment instrumentation and secondary-staged minimally invasive lateral-approach interbody fusion, and classified as group A. A historical group of patients who were treated by traditional wide-open AP approach was used as a control group and classified as group B. The radiological and clinical outcomes were compared between the 2 groups.There were 12 patients in group A and 18 patients in group B. The mean operative time and intraoperative blood loss of anterior reconstruction were significantly higher in group B than those in group A (127.1 ± 21.7 vs 197.5 ± 47.7 min, P < 0.01; 185.8 ± 62.3 vs 495 ± 347.4 mL, P < 0.01). Two of the 12 (16.7%) patients in group A experienced 2 surgical complications: 1 (8.3%) major and 1 (8.3%) minor. Six of the 18 (33%) patients in group B experienced 9 surgical complications: 3 (16.7%) major and 6 (33.3%) minor. There was no significant difference between the 2 groups regarding loss of correction (4.3 ± 2.1 vs 4.2 ± 2.4, P = 0.89) and neurological function at final follow-up (P = 0.77). In both groups, no case of instrumentation failure, pseudarthrosis, or nonunion was noted.Compared with the wide-open AP surgery, posterior short-segment pedicle instrumentation, combined with minimally invasive lateral-approach interbody fusion, can achieve similar clinical results with significant less operative time, blood loss, and surgical complication. This procedure seems to be a reasonable treatment option for selective patients with thoracolumbar fractures.     

Treatment of tibial plateau fractures involving the posterolateral column using the extended anterolateral approach

To summarize the surgical technique and clinical effects of the extended anterolateral approach for the treatment of Schatzker type II and Schatzker type V/VI involving the posterolateral column tibial plateau.From January 2015 through December 2018, 28 patients with tibial plateau fractures involving the posterolateral column were included in the study. Among them, 16 patients were Schatzker type II treated using an extended anterolateral approach with lateral tibial locking compression plate fixation. Twelve patients were Schatzker type V or VI treated using an extended anterolateral combined with a medial approach using lateral tibial locking compression plate plus medial locking compression plate fixation. All cases were followed up for 15 to 31 months, with an average follow-up of 22.5 ± 3.7 months. During the follow-up, the tibial plateau angle (TPA), lateral posterior angle (PA) and Rasmussen radiological criteria were used to evaluate the effect of fracture reduction and fixation; the Hospital for Special Knee Surgery score and the range of motion were used to evaluate knee function. Additionally, the Lachman and knee Valgus (Varus) stress tests were used to evaluate anteroposterior and lateral stability of the knee.All fractures healed. At the 12-month follow-up, the Schatzker type II group revealed a mean TPA of 86.38 ± 3.92°, a mean PA of 7.43 ± 2.68°, and a mean Rasmussen radiological score of 16.00 ± 2.06 points. The Schatzker type V/VI group showed a mean TPA of 84.91 ± 3.51°, a mean PA of 9.68 ± 4.01°, and a mean Rasmussen radiological score of 15.33 ± 2.99 points. During the 1-year follow-up, when the postoperative PA was re-measured, the TPA and Rasmussen score of the 2 groups did not change significantly (P > .05). At the last follow-up, the Schatzker type II group showed a knee flexion angle of 110° to 135° and a mean HHS score of 88.37 ± 10.01 points. The Schatzker type V/VI group revealed a knee flexion angle of 100° to 130° and a mean HHS score of 82.17 ± 10.76 points. Additionally, up to the last follow-up, the Lachman and knee Valgus (Varus) stress test results of the 2 groups were negative. No complications were found.The extended anterolateral approach is a good choice to treat tibial plateau fractures involving the posterolateral column.     

Three-Dimensional Reconstruction Modeling of the Spatial Displacement,Extent and Rotational Orientation of Undisplaced Femoral Neck Fractures

The purpose of this study was to employ a new three-dimensional (3D) reconstruction and modeling method to measure displacement of undisplaced femoral neck fractures (Garden stages I and II). We also aimed to evaluate the effectiveness of the Garden classification for determining the displacement of undisplaced femoral neck fractures.A total of 120 consecutive patients with undisplaced femoral neck fractures were enrolled between 2012 and 2014, including 60 within the Garden I group and 60 within the Garden II group. The displacements of the femoral head center (d1) and the lowest point of the fovea capitis femoris (d2) and rotational displacement of the femoral head (α) in the 3D model were measured with 3D computed tomography reconstruction and modeling. Five observers, trauma surgeons, were asked to found the centers of the femoral heads and the deepest points of the foveae. The intraobserver and inter-observer agreements were calculated using Fleiss’ kappa.The inter-observer and intra-observer kappa values were 0.937 and 0.985, respectively. Current method has good reliability. We discovered that many participants in our study had been misclassified by an anterior–posterior radiograph as having an “incomplete” fracture. In incomplete fracture of Garden stage I group, the average displacements d1 and d2 were 3.69 ± 1.77 mm and 14.51 ± 1.91 mm, respectively. The mean α was 4.91° ± 2.49°. For impacted fracture of Garden stage I, significant spatial displacement in the impacted fractures was observed (d1: 6.22 ± 3.36 mm; d2: 10.30 ± 5.73 mm; and α: 17.83° ± 10.72°). Similarly, significant spatial displacement was observed among the Garden stage II group (d1: 7.16 ± 4.58 mm; d2: 12.95 ± 8.25 mm; and α: 18.77° ± 9.10°). There was no significant difference in α, d1, and d2 between impacted fracture and Garden stage II groups (P > 0.05). However, significant differences were found between incomplete fracture and Garden stage II groups (P < 0.05).Our findings suggest that 3D reconstruction and modeling may be a better tool for assessing femoral neck fractures than the Garden classification. Undisplaced femoral neck fractures showed variable degrees of displacement and were not undisplaced, stable fractures. Garden classification for undisplaced femoral neck fractures has certain limitations.     

A larger sized cup accelerates cartilage erosion of acetabulum after bipolar hemiarthroplasty in elderly with femur neck fracture

Bipolar hemiarthroplasty (BHA) is one of the common procedures done for the treatment of femur neck fracture. One of the frequently encountered complication with this surgery is erosion of the acetabular cartilage. This study was conducted to investigate acetabular erosion after BHA according to the difference in diameter between femoral head and implanted cup at minimum 10-year follow-up.We retrospectively reviewed 117 patients (117 hips) undergoing BHA with fracture of neck of the femur. Their mean age was 77.8 years (range, 65–96 years) and male: female ratio was 32:85. Patients were divided into 3 groups; Group A – bipolar cup size > actual head size, Group B – cup size < head size, Group C – cup size = head size. The degree of both superior and medial acetabular cartilage erosion was identified and calculated on postoperative radiographs using line of acetabular margin and Kohler line.The mean superior and medial acetabular erosion were 1.62 ± 1.6 mm (range, 0–4.4) and 4.15 ± 2.7 mm (range, 0–8.2) in Group A, 1.30 ± 1.3 mm (range, 0–3.8) and 4.11 ± 2.7 mm (range, 0–7.8) in Group B, and 0.90 ± 1.1 mm (range, 0–2.6) and 3.16 ± 2.9 mm (range, 0–7.9) in Group C (P = .039 and P = .187, respectively). The superior acetabular erosion showed significant difference between the 3 groups. During mean follow-up period of 12.3 years, 5 patients (5/117, 4.3%) underwent conversion to total hip arthroplasty due to superior acetabular erosion. All of 3 patient underwent BHA with a larger bipolar cup than the actual femoral head.A lager sized cup accelerated superior cartilage erosion of acetabulum after BHA. An optimal cup size should be considered when undergoing BHA in elderly patients.     

Comparison of anterior chamber angle changes following phakic intraocular lens with and without a central hole implantation for moderate to high myopic eyes

The aim of this study was to compare the anterior chamber angle changes after implantation of phakic intraocular lens with and without a central hole for moderate to high myopic eyes in Chinese people.This study enrolled 106 eyes of 54 people with intraocular lens V4 implantation and 105 eyes of 53 people with intraocular lens V4c implantation. Postoperative vault, intraocular pressure, and anterior chamber angle changes were assessed using noncontract tonometer and ultrasound biomicroscope, respectively, at 1, 3, 6, and 12months after the surgery.There were no significant differences (all P > .05) between the 2 groups in the depth of the central vault, intraocular pressure, or the width of anterior chamber angle at any time point post-surgery. The anterior chamber angle width in degree had a baseline of 54.40 ± 10.51 in V4c group, and decreased to 27.80 ± 5.62, 26.95 ± 5.56, 27.32 ± 5.66, 27.04 ± 5.47 at 1, 3, 6, and 12 months post-surgery, respectively. Mean preoperative value of 50.62 ± 11.77 decreased to 27.28 ± 6.53, 26.82 ± 6.03, 26.61 ± 5.80, 26.83 ± 5.76 at 1, 3, 6, 12 months, respectively, in V4 group. It had sufficient evidence (P < .001) that anterior chamber angle will narrow done after surgery, but there were no statistically significant differences within groups at any time point after surgery.The anterior chamber angle changes of the V4c group was essentially equivalent to that of conventional V4 group, although implantation of both models will lead to the decrease in anterior chamber angle width.     

The comparison of Nice knots and traditional methods as an auxiliary reduction-fixation technique in pre-contoured locking plate fixation for comminuted Robinson type 2B clavicle fracture: A retrospective study

Open reduction and pre-contoured locking plate fixation is a popular treatment option for displaced midshaft clavicle fracture. Lag screw and cerclage are 2 main intraoperative techniques to reduce and fix fragments. However, both lag screw and metallic cerclage have disadvantages. The doubled-suture Nice knot has been reported in many areas of orthopedic surgery for its effectiveness. This study aims to compare the outcomes of comminuted mid-shaft clavicle fractures reduced by Nice knots vs traditional techniques (lag screw or/and metallic cerclage) when bridged with pre-contoured locking plates.We retrospectively reviewed 101 patients (65 females and 36 males) diagnosed with midshaft clavicle fractures with at least one wedge fragment reduced by either Nice knots or traditional methods and bridged with pre-contoured locking plates between December 2016 and April 2019. Operation time, functional outcomes, pain, patient satisfaction, fracture healing, and complications were assessed at a follow-up of 12 to 40 months.The mean age of all the patients was 50.8 years. There were 52 and 49 patients in the Nice knot group and traditional group respectively, and no differences between 2 groups were found in general patient characteristics, fracture type, follow up and injury-to-surgery duration. The Nice knot group had significant less operation time (P < .01) than the traditional group (mean and standard deviation [SD], 78.6 ± 19.0 compared with 94.4 ± 29.9 minutes, respectively). For healing time, functional score, pain, satisfaction and complications, there were no significant differences between groups, despite the Nice knot group had slightly better results.Both Nice knots and traditional methods treated for comminuted Robinson type 2B clavicle fractures were effective and safe. And the Nice knots seemed to be superior with significant less operation time.     

Comparison of Clinical and Radiological Improvement Between the Modified Trephine and High-speed Drill as Main Osteotomy Instrument in Pedicle Subtraction Osteotomy

High-speed drill is the main osteotomy instrument in pedicle subtraction osteotomy (PSO) currently. Considering the long duration of surgery, the large amount of blood loss, and the high incidence of neurovascular injury, the osteotomy procedure is challenging. Use of trephine for the osteotomy displays high efficiency by shortening surgery time and reducing blood loss in anterior cervical corpectomy and fusion. However, the potential risk of neurological injury is high. We modified the trephine by adding locking instrument, when the serrated top of the trephine reaches the tip of the probe; the locking instrument on the probe restricts the trephine and improves security during the osteotomy procedure.The aim of this study was to compare the clinical and radiological improvement between the modified trephine and high-speed drill as main osteotomy instrument in PSO.From February 2009 to 2013, 50 patients with severe thoracolumbar kyphotic deformity caused by old compressive vertebrae were prospectively reviewed. All patients were randomly assigned to the experimental group (27 patients received PSO with modified trephine) and the control group (23 patients received PSO with high-speed drill). The clinical records were reviewed and compared for surgical time, operative blood loss, functional improvement (Oswestry Disability Index), and pain relief (visual analog scale). The radiological records were reviewed and compared for correction of kyphotic deformity postoperatively and correction loss at 2-year follow-up.All patients successfully finished the PSO procedure, and got satisfactory kyphotic deformity correction and overall function improvement. The surgery time was shorter in the experimental group than that in the control group (132.7 ± 12.6 vs 141.7 ± 16.7 min; P = 0.03). No significant difference was found in blood loss (882.9 ± 98.9 mL vs 902.2 ± 84.9 mL; P = 0.47) or correction of the kyphotic angle (33.4 ± 3.4° vs 32.1 ± 2.5°, P = 0.13) postoperatively between the 2 groups. At 24-month follow-up, no difference was discovered in loss of the correction (4.9 ± 1.6° vs 4.5 ± 1.6°; P = 0.42), change of Oswestry Disability Index (49.4 ± 6.2% vs 48.2 ± 4.2%; P = 0.44), or in back pain relief (6.2 ± 1.4 vs 6.4 ± 1.2 min; P = 0.51) between the 2 groups. No internal fixation related complication occurred and bony fusion was detected in lateral X-ray in all patients. In the control group, 2 patients had transient nerve root deficit, 14 patients at 3-month follow-up and 3 patients at 2-year follow-up experienced graft donor site morbidity, and pain killer medicine was always required.In conclusion, the modified trephine obviously shortens surgery time, and prevents graft donor site morbidity when compared to a high-speed drill. The learning curve for using the modified trephine in PSO procedure is short.     

Anterior Lumbar Interbody Fusion for Degenerative Discogenic Low Back Pain: Evaluation of L4–S1 Fusion

The treatment of degenerative discogenic pain is controversial, and anterior lumbar fusion for the treatment of degenerative discogenic low back pain has also been a controversial topic for over a generation.The aim of this systematic review was to evaluate the outcome of different anterior lumbar fusion levels for degenerative discogenic low back pain.In this study, we performed a clinical outcome subgroup analysis. The outcomes of 84 consecutive patients who underwent anterior lumbar interbody fusion from 2004 to 2009 were reviewed. The operative time, intraoperative blood loss, hospital stay, Oswestry Disability Index (ODI), visual analog scale (VAS) results, and complication rate were recorded separately.Medical indications were degenerative disc disease (73.8%), postdiscectomy disc disease (16.1%), and disc herniation (9.5%). Patients with severe spondylolysis or disc degeneration, with more than 3 or multilevel lesions, were excluded.The mean operative time was 124.5 ± 10.9 min (range 51–248 min), the mean intraoperative blood loss was 242.1 ± 27.7 mL (range 50–2700 mL), the mean hospital stay was 3.9 ± 1.1 days (range 3–6 days), the mean preoperative VAS score was 7.5 ± 1.4, and the mean preoperative ODI score was 60.0 ± 5.7. At the 1-year follow-up, the mean postoperative VAS score was 3.3 ± 1.3 and the mean postoperative ODI score was 13.6 ± 3.4 (P < 0.05). L4–L5 disc fusion led to better clinical results than 2-level L4–L5/L5–S1 disc fusion. Additionally, the 2-level fusion of L4–L5/L5–S1 had better clinical results than the L5–S1 disc fusion at both the 1 and 2-year postoperative follow-ups regarding the VAS score and the ODI score. The rate of complications was more frequent in the 2-level L4–L5/L5–S1 group (27.3%) (group C) than in the L4–L5 group (9.1%) (group A) and the L5–S1 group (12.5%) (group B). There was no difference between the L4–L5 group (9.1%) and the L5–S1 group (12.5%). A venous tear occurred during surgery and was successfully repaired in 6 of the 84 patients. Also, out of the 84 patients, 6 were found with pseudarthrosis during the follow-up, and these patients underwent a spinal fusion with instrumentation, with a posterior approach after a mean of 1 year. The complications secondary to the surgical approach were persistent abdominal pain (1/84, 1.2%) and wound dehiscence (1/84, 1.2%).Anterior lumbar interbody fusion for L4–L5 had better clinical results than the 2-segmental L4–L5/L5–S1 disc fusion, and the 2-segmental L4–L5/L5–S1 disc fusion had better clinical results than the L5–S1 disc fusion. Also, the 2-segmental L4–L5/L5–S1 disc fusion had a higher complication rate (27.3%), but there was no difference between the L4–L5 group (9.1%) and the L5–S1 group (12.5%).     

The Radiological Feature of Anterior Occiput-to-Axis Screw Fixation as it Guides the Screw Trajectory on 3D Printed Models: A Feasibility Study on 3D Images and 3D Printed Models

Anterior occiput-to-axis screw fixation is more suitable than a posterior approach for some patients with a history of posterior surgery. The complex osseous anatomy between the occiput and the axis causes a high risk of injury to neurological and vascular structures, and it is important to have an accurate screw trajectory to guide anterior occiput-to-axis screw fixation.Thirty computed tomography (CT) scans of upper cervical spines were obtained for three-dimensional (3D) reconstruction. Cylinders (1.75 mm radius) were drawn to simulate the trajectory of an anterior occiput-to-axis screw. The imitation screw was adjusted to 4 different angles and measured, as were the values of the maximized anteroposterior width and the left-right width of the occiput (C0) to the C1 and C1 to C2 joints. Then, the 3D models were printed, and an angle guide device was used to introduce the screws into the 3D models referring to the angles calculated from the 3D images.We found the screw angle ranged from α1 (left: 4.99 ± 4.59°; right: 4.28 ± 5.45°) to α2 (left: 20.22 ± 3.61°; right: 19.63 ± 4.94°); on the lateral view, the screw angle ranged from β1 (left: 13.13 ± 4.93°; right: 11.82 ± 5.64°) to β2 (left: 34.86 ± 6.00°; right: 35.01 ± 5.77°). No statistically significant difference was found between the data of the left and right sides. On the 3D printed models, all of the anterior occiput-to-axis screws were successfully introduced, and none of them penetrated outside of the cortex; the mean α4 was 12.00 ± 4.11 (left) and 12.25 ± 4.05 (right), and the mean β4 was 23.44 ± 4.21 (left) and 22.75 ± 4.41 (right). No significant difference was found between α4 and β4 on the 3D printed models and α3 and β3 calculated from the 3D digital images of the left and right sides.Aided with the angle guide device, we could achieve an optimal screw trajectory for anterior occiput-to-axis screw fixation on 3D printed C0 to C2 models.     

Comparison of the fixation ability of headless compression screws and locking plate for metacarpal shaft transverse fracture

Metacarpal shaft fractures are common hand fractures. Although bone plates possess strong fixation ability, they have several limitations. The use of headless compression screws for fracture repair has been reported, but their fixation ability has not been understood clearly.This study aimed to compare the fixation ability of locked plate with that of headless compression screw for metacarpal fracture repair.A total of 14 artificial metacarpal bones (Sawbones, Vashon, WA, USA) were subjected to transverse metacarpal shaft fractures and divided into 2 groups. The first group of bones was fixed using locked plates (LP group), whereas the second group was fixed using headless compression screws (HC group). A material testing machine was used to perform cantilever bending tests, whereby maximum fracture force and stiffness were measured. The fixation methods were compared by conducting a Mann–Whitney U test.The maximum fracture force of the HC group (285.6 ± 57.3 N, median + interquartile range) was significantly higher than that of the LP group (227.8 ± 37.5 N; P < .05). The median of the HC group was 25.4% greater. However, no significant difference in stiffness (P > .05) was observed between the HC (65.2 ± 24.6 N/mm) and LP (61.7 ± 19.7 N/mm) groups.Headless compression screws exhibited greater fixability than did locked plates, particularly in its resistance to maximum fracture force.     

Minimally invasive approach with external fixator for intra-articular calcaneal fractures in children

Calcaneal fractures are rare in pediatric population, with more displaced intra-articular fractures encountered due to the increasing number of high-energy trauma. Operative interventions are gaining popularity because of the unsatisfactory outcomes of traditional conservative methods. This study investigated the clinical outcomes of a minimally invasive technique using the sinus tarsi approach and external fixator in the treatment of intra-articular calcaneal fractures in pediatric patients.Patients who underwent open reduction between January 2010 and January 2018 at our institute were included in this study and reviewed retrospectively. Radiological and clinical parameters were all recorded and analyzed.Overall, 29 patients were included in the study, including 23 boys and 6 girls (10.2 ± 2.2 years old). The average follow-up was 29.5 months postoperatively (range, 26–72 months). Bohler angle was 15.2 ± 3.3° preoperatively, and 34.0 ± 3.8° postoperatively (P < .001); Gissane angle was 101.8 ± 6.2 degrees preoperatively, and 129.7 ± 6.2° postoperatively (P < .001). The average length of incision was 3.4 ± 0.7 cm. At the last follow-up, all patients showed satisfactory clinical outcomes and the score was 90.0 ± 2.3 according to American Orthopedic Foot and Ankle Society Scale.Minimally invasive approach with external fixator is an effective method for treating displaced intra-articular calcaneal fractures in pediatric patients, with a lower incidence of wound-related complications and good cosmetic outcomes.     

Comparison of two different scleral fixation techniques of posterior chamber Carlevale lens

To investigate the surgical outcomes of 2 different scleral fixation techniques of the new single-piece foldable acrylic Carlevale lens (Soleko) and to compare our results with previous reports of the literature.A retrospective, non-randomized comparative study involving 2 series of patients who underwent 2 different scleral fixation techniques of Carlevale lens was performed. Minimum follow-up of 3 months was requested for inclusion in the study. All the patients underwent a standard ophthalmologic examination including best correct visual acuity, measurement of intraocular pressure, anterior segment, and fundus examination. In the first technique (group 1), plugs were externalized through a 23 gauge sclerotomy and placed within 2 scleral pockets. In the second technique (group 2), plugs were externalized through a 25-gauge sclerotomy and covered by 2 scleral flaps. For an estimation of the refractive prediction error, the postoperative spherical equivalent of objective refraction was calculated (IOL Master 750, Carl Zeiss Meditec AG, Jena, Germany). Spectral domain optical coherence tomography (Spectralis HRA+OCT2, Heidelberg Engineering, Heidelberg, Germany) of anterior segment was used to check plugs positioning postoperatively.Twenty-three eyes in group 1 and 9 eyes in group 2 were included. Preoperative diagnosis was aphakia, dislocated posterior chamber intra ocular lens, dislocated lens, anisometropia, Uveitis-Glaucoma-Hyphema syndrome, perforating trauma with dislocated intra ocular lens, and open globe injury with dislocated intra ocular lens. Respectively, in groups 1 and 2, refractive spherical equivalent prediction error was –0,31 ± 0,74 D and –0,27 ± 0,80 D, and postoperative best-corrected visual acuity was 0,42 ± 0,31 logMAR and 0,47 ± 0,45 logMAR. In group 1, 1 eye developed cystoid macular edema, 1 eye vitreous haemorrhage, and 3 eyes showed plugs located outside the scleral pockets under the conjunctiva. Rupture of 1 of the 2 tips of the plug was observed in 1 patient of group 1 during the externalization.Carlevale lens is a scleral fixated intra ocular lens specifically designed for posterior chamber implantation that could be successfully managed without any significant difference between the 2 surgical techniques, and appears approachable for anterior and posterior segment surgeons. A 25-gauge sclerotomy should be preferred with the aim of a sutureless surgery regardless the technique employed.     

Sagittal plane alignment affects the strength of pin fixation in supracondylar humerus fractures

Closed reduction with percutaneous pin fixation is commonly used to treat pediatric supracondylar humerus fractures. Various pin configurations of varying biomechanical strength have been described. However, to our knowledge, no biomechanical study has focused on pin alignment in the sagittal plane. Our goal was to compare the stability of fixation using 3 different pin constructs: 3 lateral pins diverging in the coronal plane but parallel in the sagittal plane (3LDP), 3 lateral pins diverging in the coronal and sagittal planes (3LDD), and 2 crossed pins (1 medial and 1 lateral).Transverse fractures were made through the olecranon fossa of 48 synthetic humeri, which were then reduced and pinned in the 3LDP, 3LDD, and crossed-pin configurations (16 specimens per group) using 1.6-mm Kirschner wires. The sagittal plane pin spread was significantly greater in the 3LDD group than in the 3LDP group, whereas we found no difference in the coronal plane. Sagittal extension testing was performed from 0° to 20° at 1°/s for 10 cycles using a mechanical torque stand. The torque required to extend the distal fragment 20° from neutral was compared between groups using one-way analysis of variance with multiple comparison post-hoc analysis. P values ≤.05 were considered significant.The 3LDD configuration was more stable than the 3LDP and crossed-pin configurations. The mean torque required to displace the pinned fractures was 5.7 Nm in the 3LDD group versus 4.1 Nm in the 3LDP group and 3.7 Nm in the crossed-pin group (both, P < .01). We found no difference in stability between the 3LDP and crossed-pin groups (P = .45).In a synthetic biomechanical model of supracondylar humerus fracture, sagittal alignment influenced pin construct stability, and greater pin spread in the sagittal plane increased construct stability when using 3 lateral pins. The lateral pin configurations were superior in stability to the crossed-pin configuration.Level of Evidence: Level V.     

Titanium elastic nailing can be used in 6 to 10 years old pediatric with Delbet IV femoral neck fractures

The purpose of this study was to analyze the outcomes of titanium elastic nail (TEN) for the children in 6 to 10 years old who sustained a Delbet IV femoral neck fracture.A total of 56 children aged 6 to 10 years old with Delbet IV femoral neck fracture treated with TEN or cannulated screw (SC) were identified at our hospital from January 2009 to December 2019. Of which 24 were treated with TEN, and 32 with SC. All of them were followed up for 1 year after operation, and the differences in operation time, intraoperative blood loss, hospitalization time, hip joint function, and complication between the 2 groups were compared. Harris and Ratliff hip score were used to evaluate the hip function.All 56 fractures united properly. No major complications were noted in both groups. The intraoperative blood loss and operation time in TEN group and SC group were (11.42 ± 3.41) mL, (19.66 ± 4.05) mL (P = .000) and (33.58 ± 7.89) min, (40.22 ± 7.48) min (P = .002), respectively. There was no significant statistical difference between hip regarding range of motion and femoral neck-shaft angle in both groups, as well as Harris and Ratliff hip score between the 2 groups.TEN represent safe and effective methods in the treatment of Delbet IV femoral neck fracture in 6 to 10 years old children. TEN internal fixation is a minimal invasive and simpler technique and suitable for young children of Delbet IV femoral neck fracture.     

Shear wave elastography of the scalene muscles in healthy adults: A preliminary study

The aim of the study is to evaluate the reliability of shear wave elastography to assess the anterior and middle scalene muscles in healthy adult subjects.The study included 60 scalene muscles in 15 healthy subjects. High-resolution ultrasound and shear wave elastography were used to evaluate the anterior scalene and the middle scalene muscles. Stiffness values were measured.The mean shear elastic modulus showed the following values, right anterior scalene muscle 18.83 ± 5.32 kPa, left anterior scalene muscle 21.71 ± 4.8 kPa, right middle scalene muscle 12.84 ± 5.2 kPa, left middle scalene muscle 19.76 ± 5.30 kPa. Positive correlation was noted between the left middle scalene muscle and body mass index (P = .004). No difference in elasticity was noted between the right and left anterior scalene muscles; however, significant difference was noted between the right and left middle scalene muscles (P = .002).The results obtained in our study could be a reference point for future research considering different scalene muscle pathologies.     

Treatment of Severely Displaced Radial Neck Fractures in Children With Percutaneous K-wire Leverage and Closed Intramedullary Pinning

To evaluate the efficacy and safety of percutaneous K-wire leverage (PKWL) reduction and closed intramedullary pinning (CIMP) for the treatment of pediatric radial neck fractures.From June 2010 to December 2013, a total of 50 children with Judet III and IV radial neck fractures were treated at our hospital. Manual closed reduction was first attempted to reduce the radial neck fractures. Upon successful closed reduction or the radial neck–shaft angle was reduced to <45°, radial intramedullary pinning or CIMP was performed for fixation. Unsuccessful manual reduction was corrected using percutaneous K-wire leverage and CIMP. The injured arm was fixed at the functional position using plaster for 4 to 6 weeks.Sixteen patients were treated with manual closed reduction and CIMP (group A). Percutaneous K-wire leverage and CIMP were performed for 30 patients (group B). Another 4 patients were treated with open reduction and CIMP (group C). Groups B and C showed no significant difference in the radial neck–shaft angle, fracture displacement, and angle/displace ratio (P > 0.05), but were significantly larger than group A in the radial neck–shaft angle and fracture displacement (P < 0.05). Group A and B had significantly shorter operation time than group C (58.4 ± 14.5 minutes, 55.2 ± 11.2 minutes, versus 81.4 ± 7.5 minutes, P < 0.05). Forty-five patients were followed up for a mean of 2 years. Bone union was achieved in all patients within a mean time of 4.1 months. The patients treated with manual reduction or percutaneous leverage reduction showed excellent results. Three patients, however, treated with open reduction showed 10 to 20° limitation in range of motion of the elbow. No other complications were seen.Percutaneous K-wire leverage and CIMP are safe and effective for the treatment of pediatric Judet III and IV radial neck fractures.     

Retroperitoneoscopic debridement and internal fixation for the treatment of lumbar tuberculosis

To describe the retroperitoneoscopic debridement technique and evaluate the clinical outcome of internal fixation for the treatment of lumbar tuberculosis.Twenty-eight patients were performed conventional laparoendoscopic technique (n = 17) or laparoendoscopic single-site technique (n = 11). Antituberculosis chemotherapy and thoracolumbosacral orthosis were given to all patients. The clinical outcomes were evaluated with preoperative and postoperative Visual Analog Scale, and radiographs with respect to sagittal angle and fusion status.Average time of the 28 procedures was 220.6 ± 50.9 min (180–365 min). The average intraoperative blood loss was 108.6 ± 95.3 mL (50–400 mL). All patients showed significant improvement of their Visual Analog Scale back pain score at follow-up and were classified as having a radiographic fusion in this study. The mean sagittal angle was 11.2 ± 3.6° before operation, significantly improved to 3.7 ± 2.4° after operation. There were no recurrent infections during the follow-up period. Complications included loosening of anterior fixation and temporary deficit of the sympathetic nerve.Retroperitoneal laparoscopic approach with CO2 insufflation technique is a challenging but safe and effective procedure for lumbar spine tuberculosis. Retroperitoneal laparoendoscopic single-site can be used for anterior lumbar spine surgery, offer exposure for L1 through L5.     

Femoral varus derotational osteotomy without pelvic osteotomy in nonambulatory children with cerebral palsy: Minimum 5 years follow-up

Whether femoral varus derotational osteotomy (VDRO) alone or a combination of femoral and pelvic osteotomies should be performed for hip dislocation in nonambulatory children with cerebral palsy (CP) remains controversial. Few studies have reported radiographical results after the surgical treatment in nonambulatory children with CP. This study aimed to assess the results and determine predictors indicating progressive hip subluxation and redislocation after VDRO without pelvic osteotomy. We retrospectively analyzed 22 hips in 15 nonambulatory children with CP. All patients underwent VDRO without pelvic osteotomy and were followed up for at least 5 years. The mean follow-up period was 7.3 ± 1.9 years. In radiological assessments, we investigated migration percentage (MP), center-edge angle, neck-shaft angle, teardrop distance, break in Shenton''s line (SL), sharp''s angle, acetabular ridge angle (ARA), and the change ratio of MP (Change MP). We classified patients with an MP of <40% at final follow-up in the Good group and those with an MP of ≥40% in the Poor group. The Good group included 10 children (14 hips), and the Poor group included 8 children (8 hips). No preoperative differences were found in the means of all the radiographical parameters. However, MP was significantly different between the groups from 1 year postoperatively. ARA showed improvement 5 years after surgery in the Good group. Change MP in the Good group was maintained from immediately after surgery to the final follow-up. Multivariate logistic regression analyses revealed that preoperative break in SL and Change MP immediately after surgery were parameters to predict MP at the final follow-up. In the receiver operating characteristic analysis, the cut-off values were estimated to be 19.2 mm for preoperative SL and 79.0% for Change MP immediately after surgery. Within 7.3 years of follow-up, 63.6% of the patients who underwent VDRO without pelvic osteotomy had good results. Preoperative SL and postoperative Change MP can be considered as predictors of postoperative subluxation and/or dislocation.     

Analysis on clinical association of uterine scar diverticulum with subsequent infertility in patients underwent cesarean section

To evaluate the relationship between uterine cesarean scar diverticulum (CSD) and subsequent infertility in patients who underwent cesarean section, and determine the effects of pelvic fluid-releasing inflammations on infertility.A retrospective analysis was designed among patients with CSD who were admitted to our hospital from January 1, 2018 to December 31, 2019. A total of 60 patients with CSD and uterine fibroids or benign ovarian tumors who underwent cesarean section were included, and divided into the CSD group and control group. Baseline characteristics of all patients were collected, and the pelvic adhesion scores and the percents of tubal patency were evaluated. Furthermore, the postoperative clinical outcomes were followed up. The levels of inflammatory factors in pelvic fluid were tested using Elisa kits.Preoperative data indicated that the size of the uterine scar diverticulum was (1.68 ± 0.52) cm, the pelvic adhesion scores were higher in CSD group than control group (4.67 ± 0.90 vs 0.47 ± 0.90, P < .05), and 21 of 30 patients with unobstructed fallopian tubes. The levels of tumor necrosis factor-α, interleukin-1β, and interleukin-6 in patients with CSD were obviously higher than control group (P < .05). After the follow-up, the data displayed that no CSD was found in all patients, the time of menstrual period in patients with CSD was shortened to 7.80 ± 1.27 days, and the myometrial thickness at uterine scar was significantly increased (P < .05). Additionally, the pregnancy rate was increased, and 12 of 30 patients were repregnant. Correlation analysis showed that the levels of inflammatory factors (tumor necrosis factor-α, interleukin-1β, interleukin-6), the size of uterine scar diverticulum, and the myometrial thickness at uterine scar were significantly correlated with subsequent infertility (r = 0.307, 0.083, 0.147, 0.405, 0.291, P < .05).Uterine scar diverticulum repair could improve menstrual prolongation, increased the thickness of myometrium and repregnant rate. Subsequent infertility was positively correlated with uterine scar diverticulum and the levels of inflammatory factors.