3.0-Tesla MR angiography of intracranial aneurysms: comparison of time-of-flight and contrast-enhanced techniques

PURPOSE: To determine whether 3.0-T elliptical-centric contrast-enhanced (CE) magnetic resonance (MR) angiography is superior to 3.0-T elliptical-centric time-of-flight (TOF) MR angiography in the detection and characterization of intracranial aneurysms, and to determine whether increasing the acquisition matrix size in 3.0-T CE MR angiography improves image quality. MATERIALS AND METHODS: A total of 50 consecutive patients referred for MR angiographic evaluation of a known or suspected intracranial aneurysm underwent MR angiography, including three-dimensional TOF and elliptical-centric CE techniques at 3.0 T. The 3.0-T three-dimensional TOF and 3.0-T CE examinations were graded for image quality. A blind review identified the presence and location of aneurysms. RESULTS: A total of 28 aneurysms were identified in 23 of the 50 patients. The 3.0-T TOF MR angiography had a higher mean score for image quality than the 3.0-T elliptical-centric CE MR angiography (P < 0.0001). A total of 14 patients with aneurysms had conventional angiography for comparison. The 3.0-T TOF showed all the aneurysms, whereas 3.0-T CE MR angiography did not show 1 of 19 aneurysms when conventional angiography was the reference standard. CONCLUSION: For imaging intracranial aneurysms, 3.0-T TOF MR angiography offers better image quality than 3.0-T CE MR angiography using the elliptical-centric technique.     

Three-dimensional breathhold SSFP coronary MRA: a comparison between 1.5T and 3.0T

PURPOSE: To assess the feasibility of three-dimensional breathhold coronary magnetic resonance angiography (MRA) at 3.0T using the steady-state free precession (SSFP) sequence, and quantify the signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) gains of coronary MRA from 1.5T to 3.0T using whole-body and phased-array cardiac coils as the signal receiver. MATERIALS AND METHODS: Eight healthy volunteers were scanned on 1.5T and 3.0T whole-body systems using the SSFP sequence. Numerical simulations were performed for the SSFP sequence to optimize the flip angle and predict signal enhancement from 1.5T to 3.0T. Coronary artery images were acquired with the whole-body coil in transmit-receive mode or transmit-only with phased-array cardiac coil receivers. RESULTS: In vivo studies of the same volunteer group at both field strengths showed increases of 87% in SNR and 83% in CNR from 1.5T to 3.0T using a whole-body coil as the signal receiver. The corresponding increases using phased-array receivers were 53% in SNR and 92% in CNR. However, image quality at 3.0T was more variable than 1.5T, with increased susceptibility artifacts and local brightening as the result of increased B(0) and B(1) inhomogeneities. CONCLUSION: Coronary MRA at 3.0T using a three-dimensional breathhold SSFP sequence is feasible. Improved SNR at 3.0T warrants the use of coronary MRA with faster acquisition and/or improved spatial resolution. Further investigations are required to improve the consistency of image quality and signal uniformity at 3.0T.     

MRCP imaging at 3.0 T vs. 1.5 T: preliminary experience in healthy volunteers

PURPOSE: To evaluate the impact of magnetic resonance cholangiopancreatography (MRCP) imaging at 1.5T and 3.0T on image quality. MATERIALS AND METHODS: Fourteen volunteers were examined at both 1.5T and 3.0T using MRCP imaging performed with a breath-held two-dimensional (2D) half-Fourier acquired single-shot turbo spin-echo (HASTE) thick-slab sequence, a free-breathing navigator-triggered three-dimensional (3D) turbo spin-echo (TSE) sequence with prospective acquisition correction, and a heavily T2-weighted (T2W) sequence with breath-held multislice HASTE. All images were scored for visualization of the biliary and pancreatic ducts, severity of artifacts, image noise, and overall image quality. RESULTS: MRCP imaging at 3.0T yielded a significant improvement in overall image quality compared to 1.5T. We found a trend for superior visualization of the biliary and pancreatic ducts at 3.0T. Heavily T2W imaging with thin sections (1.4 mm) at 3.0T provided diagnostic images and better visualization of the biliary and pancreatic ducts than heavily T2W imaging with standard sections (2.8 mm) at 3.0T. CONCLUSION: Our experience suggests that MRCP imaging at 3.0T has the potential to provide excellent images. High-resolution heavily T2W imaging with a small voxel size (1.3 x 1.3 x 1.4 mm) at 3.0T can provide diagnostic images and allow evaluation of small pathologies of the bile and pancreatic ducts, which 1.5T MRI cannot sufficiently visualize.     

Imaging artifacts at 3.0T

Clinical MRI at a field strength of 3.0T is finding increasing use. However, along with the advantages of 3.0T, such as increased SNR, there can be drawbacks, including increased levels of imaging artifacts. Although every imaging artifact observed at 3.0T can also be present at 1.5T, the intensity level is often higher at 3.0T and thus the artifact is more objectionable. This review describes some of the imaging artifacts that are commonly observed with 3.0T imaging, and their root causes. When possible, countermeasures that reduce the artifact level are described.     

Application of magnetization transfer at 3.0 T in three-dimensional time-of-flight magnetic resonance angiography of the intracranial arteries

PURPOSE: To apply magnetization transfer (MT) at 3.0 T in three-dimensional time-of-flight magnetic resonance angiography of the intracranial arteries. MATERIALS AND METHODS: This study was performed on phantoms and seven volunteers to determine the effects of MT at 3.0 T. By using a modulated MT approach and an altered phase encode order, the specific absorption rate (SAR) was kept below 3 W/kg over any 8-second time period. RESULTS: For a 20-degree flip angle and 36 msec repetition time, the background suppression at 3.0 T was improved with MT by 52 +/- 5% for white matter and 40 +/- 8% for grey matter, making the distal intracranial vasculature significantly more discernible. CONCLUSIONS: MT at 3.0 T can significantly improve background suppression in 3D time-of-flight magnetic resonance angiography (MRA) of the intracranial arteries without exceeding SAR guidelines.     

Three-dimensional MR angiography in imaging platinum alloy stents

PURPOSE: To evaluate visualization inside platinum stents with three-dimensional contrast-enhanced magnetic resonance angiography (CE-MRA). MATERIALS AND METHODS: Breath-hold three-dimensional gadolinium (Gd) MRA was performed on 18 patients with 22 platinum stents in the renal (n = 18), celiac (n = 1), superior mesenteric (n = 1), and iliac (n = 2) arteries. Electronic calibers were used to measure the lumen diameter within the stent and just distal to the stent to calculate percent stenosis. MRA accuracy was determined from the difference between percent stenosis measured on MRA and digital subtracted angiography (DSA). The patients were imaged at flip angles of 45 degrees , 60 degrees , 75 degrees , 90 degrees , and 150 degrees . RESULTS: MRA demonstrated the stent lumen in all of the patients, with a mean difference between MRA and DSA of 21%. For stents oriented parallel to B0 (iliac arteries) the difference was only 10%, as compared to 22% for stents perpendicular to B0. The flip angle with the best agreement between MRA and DSA was 75 degrees (16%). CONCLUSION: The lumen of a platinum stent can be imaged with three-dimensional CE-MRA, although grading of restenosis has limited accuracy. The best results were obtained with a flip angle of 75 degrees and for stents in the iliac arteries parallel to B0.     

Comparing real-world advantages for the clinical neuroradiologist between a high field (3 T), a phased array (1.5 T) vs. a single-channel 1.5-T MR system

PURPOSE: To evaluate signal-to-noise ratio (SNR) and neuroradiologists' subjective assessments of image quality in 3-Tesla (3-T) or phased-array MR systems that are now available for clinical neuroimaging. MATERIALS AND METHODS: Brain MR images of six normal volunteers were obtained on each of three scanners: a 1.5-T single-channel system, a 12-channel, phased-array system, and a 3-T single-channel system. Additionally, clinically optimized images acquired from 28 patients who underwent imaging in more than one of these systems were analyzed. SNRs were measured and image quality and artifact conspicuity were graded by two blinded readers. RESULTS: The phased-array system produced higher SNR than either the 1.5-T or the 3-T single-channel systems, and in no instance was it outperformed. Both blinded readers judged the phased-array images to be of higher quality than those produced by the single-channel systems, with significantly less artifact. The 3-T magnet produced images with high SNR, but with increased artifact conspicuity. The phased-array system markedly decreased acquisition times without introduction of artifacts. CONCLUSION: Both quantitatively and qualitatively, the phased-array system provided image quality superior to that of the 1.5-T and 3-T single-channel systems.     

Contrast behavior of high-spatial-resolution T1-weighted MR imaging at 3.0 T vs. 1.5 T

Twenty-four volunteers were examined at T1-weighted images with thin sections using gradient-based sequences with a possible short and same TR at 3.0 and 1.5 T. Pancreas-to-spleen contrast measurements and scores for visual assessments of image contrast were significantly worse at 3.0 T than at 1.5 T on both sequences. The image contrast of high-spatial-resolution T1-weighted images at 3.0 T is decreased compared to that of images with the same and possible short TR at 1.5 T.     

Improved lumen visualization in metallic vascular implants by reducing RF artifacts.

In this study, a method is proposed for MRI of the lumen of metallic vascular implants, like stents or vena cava filters. The method is based on the reduction of artifacts caused by flow, susceptibility, and RF eddy currents. Whereas both flow artifacts and susceptibility artifacts are well understood and documented, RF artifacts are not. Therefore, the present study comprises an in-depth theoretical explanation of the factors governing the severity of these RF artifacts. It is explained that the RF caging inside cage-like implants is caused by disturbances of the send and receive sensitivities due to coupling between the loops in the implant and the MR scanner's send and receive coils. A scaled excitation angle model describing the behavior of the signal intensity inside the implants as a function of the applied nominal excitation angle is introduced. This theoretical model was validated in phantom experiments. Reduced signal from within implants due to the caging problem could be restored by increasing the applied RF power in the excitation pulse, without exceeding the generally accepted SAR safety limits. The method was tested in vitro and in vivo in a pig model and allowed adequate depiction of the interior of a nitinol stent and that of a vena cava filter in contrast-enhanced MR angiograms. Magn Reson Med 47:171-180, 2002.     

Intracranial time-of-flight MR angiography at 7T with comparison to 3T

PURPOSE: To establish the feasibility of intracranial time-of-flight (TOF) MR angiography (MRA) at 7T using phased array coils and to compare its performance to 3T. MATERIALS AND METHODS: In an initial study, five normal volunteers were scanned at 7T and 3T using eight-channel coils and standard acquisition parameters from a clinical TOF protocol. In a second study three additional studies were performed at 7T and 3T using empirically optimized 7T parameters. Contrast-to-noise (CNR) values were measured for major vessel segments. RESULTS: All measurements documented CNR increases at 7T, with a mean increase of 83% in the initial study and 88% in the second study. The CNR values achieved using the latter protocol were similar to the values obtained in the initial study, despite the 42% reduction expected due to the higher spatial resolution. CNR in the smaller peripheral vessels was increased dramatically, resulting in excellent visualization at high resolution. CONCLUSION: TOF MRA at 7T demonstrated improved visualization of the intracranial vasculature, particularly the smaller peripheral vessels, and may benefit studies of small aneurysms, atherosclerosis, vasospasm, and vasculitis.     

High spatial resolution 3D MR cholangiography with high sampling efficiency technique (SPACE): comparison of 3T vs. 1.5T

Purpose

The aim of this study was to evaluate image quality of 3D MR cholangiography (MRC) using high sampling efficiency technique (SPACE) at 3 T compared with 1.5 T.

Methods and materials

An IRB approved prospective study was performed with 17 healthy volunteers using both 3 and 1.5 T MR scanners. MRC images were obtained with free-breathing navigator-triggered 3D T2-weighted turbo spin-echo sequence with SPACE (TR, >2700 ms; TE, 780 ms at 3 T and 801 ms at 1.5 T; echo-train length, 121; voxel size, 1.1 mm × 1.0 mm × 0.84 mm). The common bile duct (CBD) to liver contrast-to-noise ratios (CNRs) were compared between 3 and 1.5 T. A five-point scale was used to compare overall image quality and visualization of the third branches of bile duct (B2, B6, and B8). The depiction of cystic duct insertion and the highest order of bile duct visible were also compared. The results were compared using the Wilcoxon signed-ranks test.

Results

CNR between the CBD and liver was significantly higher at 3 T than 1.5 T (p = 0.0006). MRC at 3 T showed a significantly higher overall image quality (p = 0.0215) and clearer visualization of B2 (p = 0.0183) and B6 (p = 0.0106) than at 1.5 T. In all analyses of duct visibility, 3 T showed higher scores than 1.5 T.

Conclusion

3 T MRC using SPACE offered better image quality than 1.5 T. SPACE technique facilitated high-resolution 3D MRC with excellent image quality at 3 T.     

Catheter-directed contrast-enhanced coronary MR angiography in swine using magnetization-prepared True-FISP.

Contrast-enhanced (CE) coronary magnetic resonance angiography (MRA) following intraarterial (IA) injection of contrast agent was compared using two sequences in swine: magnetization-prepared fast imaging with steady-state precession (True-FISP), and magnetization-prepared fast low-angle shot (FLASH). Thick-slice projection images were acquired with submillimeter in-plane spatial resolution (0.9 x 0.8 mm(2)). The magnetization-preparation scheme provided a clear delineation of the major coronary arteries with excellent background suppression. The True-FISP acquisition resulted in an increase in signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) by approximately a factor of 2 over FLASH (P < 0.05). Magnetization-prepared True-FISP is a promising technique for catheter-directed CE thick-slice projection coronary MRA.     

In vitro evaluation of intravascular stent artifacts in three-dimensional MR angiography

RATIONALE AND OBJECTIVES: To evaluate the intraluminal signal characteristics of various stents and stent-grafts in contrast-enhanced three-dimensional MR angiography (3D MRA) in vitro. METHODS: Fourteen stents made of different materials (steel, nitinol, tantalum, cobalt-based alloy, polyethylene) and six stent-grafts were implanted in plastic tubes simulating the common iliac artery. The tubes were filled with gadopentetate dimeglumine in water at a concentration of 25 mmol/L and positioned in a plastic container filled with water. For imaging, the container was placed in the center of the magnet, parallel, orthogonal, and diagonal to the z axis. A 3D gradient-echo sequence (T1-FFE) was acquired with the following parameters: repetition time 5.3 ms, echo time 1.6 ms, flip angle 50 degrees, slice thickness 1.5 mm, and acquisition matrix 256 with zero filling to 512. To evaluate the influence of the frequency-encoding gradient on the appearance of the artifacts, stents were examined with their axes oriented in all three directions both with the frequency-encoding gradient in the feet-head and right-left directions. The size and pattern of stent-related artifacts were evaluated semiquantitatively for each measurement. RESULTS: Five different components of artifacts could be distinguished: homogeneous signal reduction inside the stent, narrowing of the stent lumen, structures of various shapes inside the stents, signal reduction or signal increase at the ends of the stents, and shift of the intraluminal signal orthogonal to the longitudinal axis of the vessel. The size of the artifacts depended heavily on the material of the stent. The polyethylene stent showed no artifacts, the tantalum stent only minor artifacts. Nitinol stents were characterized by artifacts at both ends and signal reduction intraluminally. Stents made of steel demonstrated the strongest artifacts, characterized by almost complete signal loss intraluminally. The characteristics of the artifacts of all stents depended on the direction of the stent relative to the frequency-encoding gradient. CONCLUSIONS: Three-dimensional MRA follow-up after stent placement may be applicable for stent patency evaluation in all instances. However, grading of stenoses seems to be unrealistic in steel stents and in most nitinol stents.     

Effects of RF inhomogeneity at 3.0T on ramped RF excitation: application to 3D time-of-flight MR angiography of the intracranial arteries

PURPOSE: To demonstrate the effects of inherent RF inhomogeneity on ramped RF excitation at 3.0T, and to introduce a simple correction for improving visualization of distal intracranial arteries in three-dimensional time-of-flight MR angiography (3D-TOF-MRA). MATERIALS AND METHODS: At 3.0T, the effects of RF inhomogeneity arising from RF interference were demonstrated for ramped RF excitation in intracranial 3D-TOF-MRA. Computer simulations and experiments on phantoms and eight normal volunteers were performed. Four different ramp shapes were tested as a possible means of countering the reduced RF field that affects the distal intracranial arteries. RESULTS: RF destructive interference alters the ramp pulse shape, which is problematic for vessels that proceed from the center to the edge of the brain. Increasing the ramp pulse slope was shown to be an effective yet simple correction to counter the falling-off of the RF field toward the periphery of the head. With this approach, circle-of-Willis 3D-TOF-MRA studies had improved distal visibility. CONCLUSION: Ramped RF excitation is severely affected by RF interference at 3.0T, which makes the ramp profile suboptimal for distal intracranial blood vessels. A simple correction of the ramp slope can make a marked improvement.     

MR angiography vs CT angiography in the follow-up of nitinol stent grafts in endoluminally treated aortic aneurysms

Our objective was to evaluate the accuracy of contrast-enhanced 3D MR angiography (MRA) in the follow-up of patients with endoluminally treated aortic aneurysms and correlate these findings with uni- or biphasic CT angiography (CTA). Forty MR angiograms in 32 patients with implanted aortic nitinol stent grafts were compared to CTA. Twenty-two MR examinations were correlated with arterial-phase CTA (uniphasic), and 18 MR examinations were correlated with biphasic CTA. Uniphasic CTA demonstrated three type-1/type-3 endoleaks and four reperfusion (type-2) endoleaks. In addition, MRA depicted two type-2 reperfusion endoleaks that were missed by CTA. Using biphasic CTA, two type-1/type-3 endoleaks and three reperfusion (type-2) endoleaks were detected; of those, delayed scanning detected three reperfusion (type-2) endoleaks missed during arterial-phase CTA. In addition to the findings by CTA, MRA depicted another type-2 reperfusion endoleak. Magnetic resonance angiography is at least as sensitive as uni- or biphasic CTA for detecting endoleaks and may consequently offer advantages in patients with contraindications to iodinated contrast agents.     

Single-voxel proton MRS of the human brain at 1.5T and 3.0T.

Single-voxel proton spectra of the human brain were recorded in five subjects at both 1.5T and 3.0T using the STEAM pulse sequence. Data acquisition parameters were closely matched between the two field strengths. Spectra were recorded in the white matter of the centrum semiovale and in phantoms. Spectra were compared in terms of resolution and signal-to-noise ratio (SNR), and transverse relaxation times (T(2)) were estimated at both field strengths. Spectra at 3T demonstrated a 20% improvement in sensitivity compared to 1.5T at short echo times (TE = 20 msec), which was lower than the theoretical 100% improvement. Spectra at long echo times (TE = 272 msec) exhibited similar SNR at both field strengths. T(2) relaxation times were almost twofold shorter at the higher field strength. Spectra in phantoms demonstrated significantly improved resolution at 3T compared to 1.5T, but resolution improvements in in vivo spectra were almost completely offset by increased linewidths at higher field.     

Multislice dark-blood carotid artery wall imaging: a 1.5 T and 3.0 T comparison

PURPOSE: To compare two multislice turbo spin-echo (TSE) carotid artery wall imaging techniques at 1.5 T and 3.0 T, and to investigate the feasibility of higher spatial resolution carotid artery wall imaging at 3.0 T. MATERIALS AND METHODS: Multislice proton density-weighted (PDW), T2-weighted (T2W), and T1-weighted (T1W) inflow/outflow saturation band (IOSB) and rapid extended coverage double inversion-recovery (REX-DIR) TSE carotid artery wall imaging was performed on six healthy volunteers at 1.5 T and 3.0 T using time-, coverage-, and spatial resolution-matched (0.47 x 0.47 x 3 mm3) imaging protocols. To investigate whether improved signal-to-noise ratio (SNR) at 3.0 T could allow for improved spatial resolution, higher spatial resolution imaging (0.31 x 0.31 x 3 mm3) was performed at 3.0 T. Carotid artery wall SNR, carotid lumen SNR, and wall-lumen contrast-to-noise ratio (CNR) were measured. RESULTS: Signal gain at 3.0 T relative to 1.5 T was observed for carotid artery wall SNR (223%) and wall-lumen CNR (255%) in all acquisitions (P < 0.025). IOSB and REX-DIR images were found to have different levels of SNR and CNR (P < 0.05) with IOSB values observed to be larger. Normalized to a common imaging time, the higher spatial resolution imaging at 3.0 T and the lower spatial resolution imaging at 1.5 T provided similar levels of wall-lumen CNR (P = NS). CONCLUSION: Multislice carotid wall imaging at 3.0 T with IOSB and REX-DIR benefits from improved SNR and CNR relative to 1.5 T, and allows for higher spatial resolution carotid artery wall imaging.     

Three-dimensional spiral MR imaging: Application to renal multiphase contrast-enhanced angiography.

A fast MR pulse sequence with spiral in-plane readout and conventional 3D partition encoding was developed for multiphase contrast-enhanced magnetic resonance angiography (CE-MRA) of the renal vasculature. Compared to a standard multiphase 3D CE-MRA with FLASH readout, an isotropic in-plane spatial resolution of 1.4 x 1.4 mm(2) over 2.0 x 1.4 mm(2) could be achieved with a temporal resolution of 6 sec. The theoretical gain of spatial resolution by using the spiral pulse sequence and the performance in the presence of turbulent flow was evaluated in phantom measurements. Multiphase 3D CE-MRA of the renal arteries was performed in five healthy volunteers using both techniques. A deblurring technique was used to correct the spiral raw data. Thereby, the off-resonance frequencies were determined by minimizing the imaginary part of the data in image space. The chosen correction algorithm was able to reduce image blurring substantially in all MRA phases. The image quality of the spiral CE-MRA pulse sequence was comparable to that of the FLASH CE-MRA with increased spatial resolution and a 25% reduced contrast-to-noise ratio. Additionally, artifacts specific to spiral MRI could be observed which had no impact on the assessment of the renal arteries.     

Gadolinium-enhanced, vessel-tracking, two-dimensional coronary MR angiography: single-dose arterial-phase vs. delayed-phase imaging

The purposes of our study were to investigate the benefits of using a single dose of an extracellular contrast agent for coronary magnetic resonance angiography (CMRA) and to determine the relative benefits of arterial-phase vs. delayed-phase image acquisition. The right coronary artery was imaged in 10 healthy adults using a breath-hold, two-dimensional fast gradient echo pulse sequence designed for vessel tracking (multiphase, multislice image acquisition). Pre- and postcontrast CMRA was performed. Postcontrast imaging consisted of arterial- and delayed-phase CMRA following a 15 mL bolus (single dose) of contrast media and of delayed-phase imaging following a cumulative 45 mL contrast dose (triple dose). Contrast-enhanced CMRA provided a significantly higher (P < 0.001) signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) than noncontrast CMRA. CNR was highest for single-dose arterial-phase CMRA (13.1 +/- 4.5) and triple-dose delayed-phase CMRA (13.0 +/- 4.8), followed by single-dose delayed-phase CMRA (8.4 +/- 3.5) and noncontrast CMRA (4.2 +/- 1.8). Single-dose arterial-phase CMRA provided the best visualization of the distal right coronary artery and was preferred for blinded physician assessments. We concluded that utilization of a single dose of extracellular contrast media improves CMRA, especially if timed for arterial-phase imaging. J. Magn. Reson. Imaging 2001;13:682-689.