Effect of signal-to-noise ratio on directional microphone benefit and preference

This study examined speech intelligibility and preferences for omnidirectional and directional microphone hearing aid processing across a range of signal-to-noise ratios (SNRs). A primary motivation for the study was to determine whether SNR might be used to represent distance between talker and listener in automatic directionality algorithms based on scene analysis. Participants were current hearing aid users who either had experience with omnidirectional microphone hearing aids only or with manually switchable omnidirectional/directional hearing aids. Using IEEE/Harvard sentences from a front loudspeaker and speech-shaped noise from three loudspeakers located behind and to the sides of the listener, the directional advantage (DA) was obtained at 11 SNRs ranging from -15 dB to +15 dB in 3 dB steps. Preferences for the two microphone modes at each of the 11 SNRs were also obtained using concatenated IEEE sentences presented in the speech-shaped noise. Results revealed that a DA was observed across a broad range of SNRs, although directional processing provided the greatest benefit within a narrower range of SNRs. Mean data suggested that microphone preferences were determined largely by the DA, such that the greater the benefit to speech intelligibility provided by the directional microphones, the more likely the listeners were to prefer that processing mode. However, inspection of the individual data revealed that highly predictive relationships did not exist for most individual participants. Few preferences for omnidirectional processing were observed. Overall, the results did not support the use of SNR to estimate the effects of distance between talker and listener in automatic directionality algorithms.     

Predicting hearing aid microphone preference in everyday listening

Seventeen hearing-impaired adults were fit with omnidirectional/directional hearing aids, which they wore during a four-week trial. For each listening situation encountered in daily living during a total of seven days, participants selected the preferred microphone mode and described the listening situation in terms of five environmental variables, using a paper and pencil form. Results indicated that hearing-impaired adults typically spend the majority of their active listening time in situations with background noise present and surrounding the listener, and the signal source located in front and relatively near. Microphone preferences were fairly evenly distributed across listening situations but differed depending on the characteristics of the listening environment. The omnidirectional mode tended to be preferred in relatively quiet listening situations or, in the presence of background noise, when the signal source was relatively far away. The directional mode tended to be preferred when background noise was present and the signal source was located in front of and relatively near the listener. Results suggest that knowing only signal location and distance and whether background noise is present or absent, omnidirectional/directional hearing aids can be set in the preferred mode in most everyday listening situations. These findings have relevance for counseling patients when to set manually switchable omnidirectional/directional hearing aids in each microphone mode, as well as for the development of automatic algorithms for selecting omnidirectional versus directional microphone processing.     

Improving speech intelligibility in background noise with an adaptive directional microphone

Omnidirectional, supercardioid, and adaptive directional microphones (ADM) were evaluated in combination with the ADRO amplification scheme for eight participants with moderate sloping hearing losses. The ADM produced better speech perception scores than the other two microphones in all noise conditions. Participants performed the Hearing in Noise Test sentences at -4.5 dB SNR or better, which is similar to the level achievable with normal hearing. The Speech, Spatial and Qualities of Hearing Scale indicated no disadvantages of using the ADM relative to the omnidirectional microphone in real-life situations. The ADM was preferred over the omnidirectional microphone in 54% of situations, compared to 17% preferences for the omnidirectional microphone, and 29% no preference. The combination of the ADM to improve SNR, and ADRO to keep the signal output comfortable and audible provided near-normal hearing performance for people with moderate hearing loss. The ADM is the recommended microphone configuration for ADRO hearing aids.     

Speech intelligibility in noisy environments with one- and two-microphone hearing aids

In this study speech intelligibility in background noise was evaluated with 10 binaural hearing-aid users for hearing aids with one omnidirectional microphone and a hearing aid with a two-microphone configuration (enabling an omnidirectional as well as a directional mode). Signal-to-noise ratio (SNR) measurements were carried out for three different types of background noise (speech-weighted noise, traffic noise and restaurant noise) and two kinds of speech material (bisyllabic word lists and sentences). The average SNR improvement of the directional microphone configuration relative to the omnidirectional one was 3.4 dB for noise presented from 90 degrees azimuth. This improvement was independent of the specific type of noise and speech material, indicating that one speech-in-noise condition may yield enough relevant information in the evaluation of directional microphones and speech understanding in noise.     

Effect of type of noise and loudspeaker array on the performance of omnidirectional and directional microphones

Differences in performance between omnidirectional and directional microphones were evaluated between two loudspeaker conditions (single loudspeaker at 180 degrees; diffuse using eight loudspeakers set 45 degrees apart) and two types of noise (steady-state HINT noise; R-Space restaurant noise). Twenty-five participants were fit bilaterally with Phonak Perseo hearing aids using the manufacturer's recommended procedure. After wearing the hearing aids for one week, the parameters were fine-tuned based on subjective comments. Four weeks later, differences in performance between omnidirectional and directional microphones were assessed using HINT sentences presented at 0 degrees with the two types of background noise held constant at 65 dBA and under the two loudspeaker conditions. Results revealed significant differences in Reception Thresholds for Sentences (RTS in dB) where directional performance was significantly better than omnidirectional. Performance in the 180 degrees condition was significantly better than the diffuse condition, and performance was significantly better using the HINT noise in comparison to the R-Space restaurant noise. In addition, results revealed that within each loudspeaker array, performance was significantly better for the directional microphone. Looking across loudspeaker arrays, however, significant differences were not present in omnidirectional performance, but directional performance was significantly better in the 180 degrees condition when compared to the diffuse condition. These findings are discussed in terms of results reported in the past and counseling patients on the potential advantages of directional microphones as the listening situation and type of noise changes.     

Predicting directional hearing aid benefit for individual listeners

The fitting of directional microphone hearing aids is becoming increasingly more routine, and this fitting option has proven to be a successful method to improve speech intelligibility in many noisy listening environments. Data suggest, however, that some hearing-impaired listeners receive significantly more directional benefit than others. It is of interest, therefore, to determine if directional benefit is predictable from identifiable audiologic factors. In this report, we examined whether the slope of audiometric configuration, amount of high-frequency hearing loss, and/or the aided omnidirectional performance for a speech-in-noise intelligibility task could be used to predict the magnitude of directional hearing aid benefit. Overall results obtained from three separate investigations revealed no significant correlation between the slope of audiometric configuration or amount of high-frequency hearing loss and the benefit obtained from directional microphone hearing instruments. Although there was a significant, negative relationship between aided omnidirectional performance and the directional benefit obtained in one study, there was considerable variability among individual participants, and nearly all of the listeners with the best omnidirectional hearing aid performance still received significant additional benefit from directional amplification. These results suggest that audiologists should consider the use of directional amplification for patients regardless of audiogram slope, high-frequency hearing loss, or omnidirectional speech intelligibility score.     

Impact of compression and hearing aid style on directional hearing aid benefit and performance.

OBJECTIVE: To evaluate the impact of low-threshold compression and hearing aid style (in-the-ear [ITE] versus behind-the-ear [BTE]) on the directional benefit and performance of commercially available directional hearing aids. DESIGN: Forty-seven adult listeners with mild-to-moderate sensorineural hearing loss were fit bilaterally with one BTE and four different ITE hearing aids. Speech recognition performance was measured through the Connected Speech Test (CST) and Hearing in Noise Test (HINT) for a simulated noisy restaurant environment. RESULTS: For both the HINT and CST, speech recognition performance was significantly greater for subjects fit with directional in comparison with omnidirectional microphone hearing aids. Performance was significantly poorer for the BTE instrument in comparison with the ITE hearing aids when using omnidirectional microphones. No differences were found for directional benefit between compression and linear fitting schemes. CONCLUSIONS: No systematic relationship was found between the relative directional benefit and hearing aid style; however, the speech recognition performance of the subjects was somewhat predictable based on Directivity Index measures of the individual hearing aid models. The fact that compression did not interact significantly with microphone type agrees well with previously reported electroacoustic data.     

Unaided and aided performance with a directional open-fit hearing aid

Differences in performance between unaided and aided performance (omnidirectional and directional) were measured using an open-fit behind-the-ear (BTE) hearing aid. Twenty-six subjects without prior experience with amplification were fitted bilaterally using the manufacturer's recommended procedure. After wearing the hearing aids for one week, the fitting parameters were fine-tuned, based on subjective comments. Four weeks later, differences in performance between unaided and aided (omnidirectional and directional) were assessed by measuring reception thresholds for sentences (RTS in dB), using HINT sentences presented at 0 degrees with R-Space restaurant noise held constant at 65dBA and presented via eight loudspeakers set 45 degrees apart. In addition, the APHAB was administered to assess subjective impressions of the experimental aid. Results revealed that significant differences in RTS (in dB) were present between directional and omnidirectional performance, as well as directional and unaided performance. Aided omnidirectional performance, however, was not significantly different from unaided performance. These findings suggest for the hearing aids and experimental condition used in this study, a patient would require directional microphones in order to perform significantly better than unaided or aided with omnidirectional microphones, and that performance with an omnidirectional microphone would not be significantly better than unaided. Finally, the APHAB-aided scores were significantly better than unaided scores for the EC, BN, RV, and AV subscales indicating the subjects, on average, perceived the experimental aid to provide significantly better performance than unaided, and that aided performance was more aversive than unaided.     

Unaided and aided performance with a directional open-fit hearing aid

Differences in performance between unaided and aided performance (omnidirectional and directional) were measured using an open-fit behind-the-ear (BTE) hearing aid. Twenty-six subjects without prior experience with amplification were fitted bilaterally using the manufacturer's recommended procedure. After wearing the hearing aids for one week, the fitting parameters were fine-tuned, based on subjective comments. Four weeks later, differences in performance between unaided and aided (omnidirectional and directional) were assessed by measuring reception thresholds for sentences (RTS in dB), using HINT sentences presented at 0° with R-Space^TM restaurant noise held constant at 65dBA and presented via eight loudspeakers set 45° apart. In addition, the APHAB was administered to assess subjective impressions of the experimental aid.

Results revealed that significant differences in RTS (in dB) were present between directional and omnidirectional performance, as well as directional and unaided performance. Aided omnidirectional performance, however, was not significantly different from unaided performance. These findings suggest for the hearing aids and experimental condition used in this study, a patient would require directional microphones in order to perform significantly better than unaided or aided with omnidirectional microphones, and that performance with an omnidirectional microphone would not be significantly better than unaided. Finally, the APHAB-aided scores were significantly better than unaided scores for the EC, BN, RV, and AV subscales indicating the subjects, on average, perceived the experimental aid to provide significantly better performance than unaided, and that aided performance was more aversive than unaided.     

The robustness of hearing aid microphone preferences in everyday listening environments

Automatic directionality algorithms currently implemented in hearing aids assume that hearing-impaired persons with similar hearing losses will prefer the same microphone processing mode in a specific everyday listening environment. The purpose of this study was to evaluate the robustness of microphone preferences in everyday listening. Two hearing-impaired persons made microphone preference judgments (omnidirectional preferred, directional preferred, no preference) in a variety of everyday listening situations. Simultaneously, these acoustic environments were recorded through the omnidirectional and directional microphone processing modes. The acoustic recordings were later presented in a laboratory setting for microphone preferences to the original two listeners and other listeners who differed in hearing ability and experience with directional microphone processing. The original two listeners were able to replicate their live microphone preferences in the laboratory with a high degree of accuracy. This suggests that the basis of the original live microphone preferences were largely represented in the acoustic recordings. Other hearing-impaired and normal-hearing participants who listened to the environmental recordings also accurately replicated the original live omnidirectional preferences; however, directional preferences were not as robust across the listeners. When the laboratory rating did not replicate the live directional microphone preference, listeners almost always expressed no preference for either microphone mode. Hence, a preference for omnidirectional processing was rarely expressed by any of the participants to recorded sites where directional processing had been preferred as a live judgment and vice versa. These results are interpreted to provide little basis for customizing automatic directionality algorithms for individual patients. The implications of these findings for hearing aid design are discussed.     

Advantages of directional hearing aid microphones related to room acoustics.

In this study, two types of hearing aids were used. Both aids had the same frequency characteristics for frontal sound, but one employed an omnidirectional microphone and the other a directional microphone. The frequency characteristics of both hearing aids were measured for five azimuths on KEMAR and in situ in 12 normal-hearing subjects. For these subjects we also determined the speech reception threshold (SRT) with background noise in two rooms with different reverberation times. The direction of the speech stimuli was always frontal; the direction of the noise was varied. Additionally, directional hearing was measured with short noise bursts from eight loudspeakers surrounding the subject. In the less reverberant room, sounds coming from behind were less amplified by the hearing aid with the directional microphone than by the one with the omnidirectional microphone. In this room the monaural SRT values were largely determined by the level of the background noise. For the directional hearing aids there was an extra binaural advantage which depended on the direction of the background noise. Only for low-frequency noise bursts was directional hearing better with directional hearing aids. In the more reverberant room, no distinct differences between the frequency characteristics of the two hearing aid types were measured. However, a systematic difference between monaural SRT values measured through the two hearing aids was found. This difference was independent of noise azimuth. In conclusion, hearing aid(s) with a directional microphone showed no disadvantages and clear advantages under specific conditions.     

Full time directional versus user selectable microphone modes in hearing aids

OBJECTIVE: The purpose of this experiment was to systematically examine hearing aid benefit as measured by speech recognition and self-assessment methods across omnidirectional and directional hearing aid modes. These data were used to compare directional benefit as measured by speech recognition in the laboratory to hearing aid wearer's perceptions of benefit in everyday environments across full-time directional, full-time omnidirectional, and user selectable directional fittings. Identification of possible listening situations that resulted in different self reported hearing aid benefit as a function of microphone type was a secondary objective of this experiment. DESIGN: Fifteen adults with symmetrical, sloping sensorineural hearing loss were fitted bilaterally with in-the-ear (ITE) directional hearing aids. Measures of hearing aid benefit included the Profile of Hearing Aid Benefit (PHAB), the Connected Sentence Test (CST), the Hearing in Noise Test (HINT), and a daily use log. Additionally, two new subscales were developed for administration with the PHAB. These subscales were developed to specifically address situations in which directional hearing aids may provide different degrees of benefit than omnidirectional hearing aids. Participants completed these measures in three conditions: omnidirectional only (O), directional only with low-frequency gain compensation (D), and user-selectable directional/omnidirectional (DO). RESULTS: Results from the speech intelligibility in noise testing indicated significantly more hearing aid benefit in directional modes than omnidirectional. PHAB results indicated more benefit on the background noise subscale (BN) in the DO condition than in the O condition; however, this directional advantage was not present for the D condition. Although the reliability of the newly proposed subscales is as yet unknown, the data were interpreted as revealing a directional advantage in situations where the signal of interest was in front of the participant and a directional disadvantage in situations where the signal of interest was behind the listener or localization was required. CONCLUSIONS: Laboratory directional benefit is reflected in self-assessment measures that focus on listening in noise when the sound source of interest is in front of the listener. The use of a directional hearing aid mode; however, may have either a positive, a neutral, or a negative impact on hearing aid benefit measured in noisy situations, depending on the specific listening situation.     

Quantification of directional benefit across different polar response patterns

The purpose of this study was to assess the relationship between the directivity of a directional microphone hearing aid and listener performance. Hearing aids were fit bilaterally to 19 subjects with sensorineural hearing loss, and five microphone conditions were assessed: omnidirectional, cardioid, hypercardioid, supercardioid, and "monofit," wherein the left hearing aid was set to omnidirectional and the right hearing aid to hypercardioid. Speech perception performance was assessed using the Hearing in Noise Test (HINT) and the Connected Speech Test (CST). Subjects also assessed eight domains of sound quality for three stimuli (speech in quiet, speech in noise, and music). A diffuse soundfield system composed of eight loudspeakers forming the corners of a cube was used to output the background noise for the speech perception tasks and the three stimuli used for sound quality judgments. Results indicated that there were no significant differences in the HINT or CST performance, or sound quality judgments, across the four directional microphone conditions when tested in a diffuse field. Of particular interest was the monofit condition: Performance on speech perception tests was the same whether one or two directional microphones were used.     

Low-frequency gain compensation in directional hearing aids

Hearing aids currently available on the market with both omnidirectional and directional microphone modes often have reduced amplification in the low frequencies when in directional microphone mode due to better phase matching. The effects of this low-frequency gain reduction for individuals with hearing loss in the low frequencies was of primary interest. Changes in sound quality for quiet listening environments following gain compensation in the low frequencies was of secondary interest. Thirty participants were fit with bilateral in-the-ear hearing aids, which were programmed in three ways while in directional microphone mode: no-gain compensation, adaptive-gain compensation, and full-gain compensation. All participants were tested with speech in noise tasks. Participants also made sound quality judgments based on monaural recordings made from the hearing aid. Results support a need for gain compensation for individuals with low-frequency hearing loss of greater than 40 dB HL.     

Comparison of performance across three directional hearing aids

This study compared the speech recognition performance of 12 hearing-impaired listeners fit with three commercially available behind-the-ear hearing aids in both directional and omnidirectional modes. One digitally programmable analog and two "true digital" hearing aids were selected as test instruments. Testing was completed in both "living room" and anechoic room environments. Speech recognition was examined using modified forms of the Hearing in Noise Test and the Nonsense Syllable Test. The single competing stimuli of these tests were replaced with five uncorrelated competing sources. Results revealed a significant speech recognition in noise advantage for all directional hearing aids in comparison to their omnidirectional counterparts. Maximum performance of the directional hearing aids did not significantly vary across circuit type, suggesting that processing differences did not affect maximum directional hearing aid performance. In addition, the results suggest that performance in one reverberant environment cannot be used to accurately predict performance in an environment with differing reverberation.     

The effects of asymmetric directional microphone fittings on acceptance of background noise

Abstract

Objective: The effects of asymmetric directional microphone fittings (i.e., an omnidirectional microphone on one ear and a directional microphone on the other) on speech understanding in noise and acceptance of background noise were investigated in 15 full-time hearing aid users. Design: Subjects were fitted binaurally with four directional microphone conditions (i.e., binaural omnidirectional, right asymmetric directional, left asymmetric directional and binaural directional microphones) using Siemens Intuis Directional behind-the-ear hearing aids. Speech understanding in noise was assessed using the Hearing in Noise Test, and acceptance of background noise was assessed using the Acceptable Noise Level procedure. Speech was presented from 0° while noise was presented from 180° azimuth. Results/Conclusions: The results revealed that speech understanding in noise improved when using asymmetric directional microphones compared to binaural omnidirectional microphone fittings and was not significantly hindered compared to binaural directional microphone fittings. The results also revealed that listeners accepted more background noise when fitted with asymmetric directional microphones as compared to binaural omnidirectional microphones. Lastly, the results revealed that the acceptance of noise was further increased for the binaural directional microphones when compared to the asymmetric directional microphones, maximizing listeners' willingness to accept background noise in the presence of noise. Clinical implications will be discussed.

Sumario

Objetivo: Se investigaron los efectos de la adaptación de micrófonos asimétricos direccionales (i.e., un micrófono omnidireccional en un oído y uno direccional en el otro) sobre la comprensión del lenguaje en ruido y la aceptación del ruido de fondo en 15 usuarios de auxiliares auditivos de tiempo completo. Diseño: A los sujetos se les adaptaron binauralmente micrófonos direccionales en cuatro condiciones: (i.e., binaural omnidireccional, direccional derecho asimétrico, izquierdo direccional asimétrico y binaural direccional) utilizando los auxiliares auditivos tipo retroauricular Siemens Intuis Direccional. La comprensión del lenguaje en ruido fue evaluada utilizando la Prueba de Audición en Ruido y la aceptación del ruido de fondo fue evaluada utilizando el procedimiento de Nivel de Ruido Aceptable. El lenguaje se presentó a 0° mientras que el ruido se presentó a un azimut de 180°. Resultados/Conclusiones: Los resultados revelan que la comprensión del lenguaje en ruido mejoró cuando se utilizan micrófonos direccionales asimétricamente, en comparación con los micrófonos omnidireccionales en forma binaural y no se dificultó significativamente al compararse con los micrófonos direccionales en forma binaural. Estos resultados también revelaron que los oyentes aceptan mayor ruido de fondo cuando se les adaptan micrófonos asimétricos direccionales en comparación con los micrófonos omnidireccionales en forma binaural. Por ultimo, los resultados revelan que la aceptación de ruido aumentó con los micrófonos direccionales bianurales cuando se compararon con los micrófonos direccionales asimétricos, maximizando la disposición de los oyentes para aceptar el ruido de fondo en presencia de ruido. Las implicaciones clínicas serán discutidas.