The cementless anatomic medullary locking femoral component: an independent clinical and radiographic assessment

Objective

To review the clinical performance of the anatomic medullary locking (AML) femoral stem in total hip arthroplasty.

Design

A clinical and radiographic review.

Setting

A tertiary lower limb joint replacement centre.

Patients

Two hundred and twenty-one patients with noninflammatory gonarthrosis.

Interventions

Two hundred and twenty-seven primary total hip arthroplasties with the noncemented AML component completed by two surgeons.

Main Outcome Measures

Independent review by two experienced reviewers of the postoperative Harris hip score, radiographs of component fixation, size and degree of diaphyseal fill.

Results

Harris hip score was 84 (range from 43 to 98); component fixation showed bone ingrowth in 41%, stable fixation with fibrous ingrowth in 56% and unstable fixation in 3%; severe thigh pain in 4% of cases correlated with unstable fixation, and there was mild thigh pain in 20% of cases.

Conclusion

The AML femoral stem performs well in replacement arthroplasty compared with other noncemented stems.     

Cranial acetabular retroversion is common in developmental dysplasia of the hip as assessed by the weight bearing position

Background and purpose

The appearance of acetabular version differs between the supine and weight bearing positions in developmental dysplasia of the hip. Weight bearing radiographic evaluation has been recommended to ensure the best coherence between symptoms, functional appearance, and hip deformities. Previous prevalence estimates of acetabular retroversion in dysplastic hips have been established in radiographs recorded with the patient supine and with inclusion only if pelvic tilt met standardized criteria. We assessed the prevalence and the extent of acetabular retroversion in dysplastic hip joints in weight bearing pelvic radiographs.

Patients and methods

We assessed 95 dysplastic hip joints (54 patients) in weight bearing anteroposterior pelvic radiographs, measuring the acetabular height and the distance from the acetabular roof to the point of crossing of the acetabular rims, if present.

Results

Acetabular retroversion was found in 31 of 95 dysplastic hip joints. In 28 of 31 hip joints with retroversion, crossover of the acetabular rims was positioned within the cranial 30% sector. The degree of pelvic tilt differed between retroverted and non-retroverted dysplastic hip joints, though only reaching a statistically significant level in male dysplastic hip joints.

Interpretation

We identified cranial acetabular retroversion in one-third of dysplastic hip joints when assessed on weight bearing pelvic radiographs. If assessed on pelvic radiographs obtained with the patient supine, and with inclusion only if the degree of pelvic tilt meets standardized criteria, the prevalence of acetabular retroversion may be underestimated.     

Bilateral intertrochanteric and femoral diaphyseal fractures with unilateral proximal tibial fracture: A case report and review of the literature

INTRODUCTION

Bilateral intertrochanteric femur fractures are relatively rare injuries. This study aims to present a case of a patient with simultaneous bilateral intertrochanteric femur fractures and femoral diaphyseal fractures and proximal tibial fracture with his twelve years follow-up.

PRESENTATION OF CASE

A 44-year-old man presented to emergency department after a motor vehicle accident. Bilateral intertrochanteric femur fractures (OTA classification – 31A.1.2) and bilateral femoral diaphyseal fractures (OTA classification – 32A.2) and nondisplaced right proximal tibial fracture (OTA classification – 41B.1) were determined in radiographs. Following closed reduction, fractures were fixed with intramedullary nails bilaterally. Proximal tibial fracture was fixed with cannulated screws following open reduction. At twelfth year follow-up he was able to do his daily activities with minimal limitation.

DISCUSSION

High energy traumas, stress fractures, systemic disorders (osteomalacia, chronic renal failure), steroid treatments, seizures and electric injuries are possible causes for bilateral hip factures. However bilateral femoral diaphyseal fractures are mostly due to high energy traumas. Long-term biphosphonate use may also cause bilateral fractures. Single-stage surgery should be performed in order to avoid secondary damages of surgical interventions. All fractures of our patient were fixed in a single session. This prevented further deterioration of patient''s status and made rehabilitation easy.

CONCLUSION

Careful evaluation of all systems should be performed in multi-trauma patients to find out concomitant injuries. Single staged surgical treatment may decrease morbidities.     

An orthopedic surgeon survey on the treatment of displaced femoral neck fracture: opposing views

Objective

To examine the reasons for practice variation in the treatment of displaced femoral neck fractures.

Design

A survey, asking surgeons to choose either hemiarthroplasty or internal fixation for 2 different female patients with a displaced femoral neck fracture.

Setting

The Canadian Orthopaedic Association Meeting, Halifax, May 1995.

Patients

The scenario in the first patient was of an independent 70-year-old woman with no pre-existing medical conditions. The scenario in the second patient was of a housebound 84-year-old woman with co-morbidity.

Main outcome measures

Proportion of surgeons choosing either hemiarthroplasty or internal fixation for each case scenario. Distribution of reasons to explain the treatment decision.

Results

Ninety-nine surgeons responded. For the case of the 70-year-old woman, 47% chose hemiarthroplasty and 53% chose internal fixation (p = 0.60), and for the 84-year-old woman, 96% chose hemiarthroplasty. These findings were consistent within the subgroups of teaching surgeons and community practice surgeons. Surgeons with 10 years or less of practice tended to favour hemiarthroplasty whereas those with more than 15 years’ practice favoured internal fixation. Important reasons for treatment choice were avoidance of reoperation in the hemiarthroplasty group (85%) and better hip function in the fixation group (83%), durability (83%) and ease of revision (77%).

Conclusion

The surgeon’s interpretation of the importance of reoperation and function underlies the differences in treatment decision regarding the management of femoral neck fractures in elderly patients.     

The Locking Compression Paediatric Hip Plate?: technical guide and critical analysis

Purpose

Osteotomies of the proximal femur and stable fixation of displaced femoral neck fractures are demanding operations. An LCP Paediatric Hip Plate™ was developed to make these operations safer and less demanding. The article focuses on the surgical technique and critically analyses the device.

Methods

Between 2006 and 2008, 30 hips in 22 patients underwent surgery. Patients’ demographics, perioperative details, postoperative outcome and complications were retrospectively collected and analysed.

Results

Patients’ diagnoses included persistent congenital hip dysplasia (n = 4), neuropathic hip dysplasia (n = 9), idiopathic ante/retroversion (n = 8), femoral neck fracture (n = 3), Perthes’ disease (n = 2), deformity after slipped capital femoral epiphysis (SCFE), congenital femoral neck pseudarthrosis, deformity after pelvic tumour resection and malunion following proximal femoral fracture (one each). In 21 of 22 patients, the postoperative radiographs showed corrections as planned. Two cases had to be revised for screw loosening. Intraoperative handling using the plate was excellent in all cases.

Conclusions

In our case series of 30 hip operations, the LCP Paediatric Hip Plate™ was shown to be safe and applicable in the clinical setting with excellent results and a low complication rate. We consider that the LCP Paediatric Hip Plate™ is a valuable device for correction of pathological conditions of the proximal femur and for fixation of displaced femoral neck fractures in children. Larger studies should be carried out to better quantify the risk of clinically relevant complications.     

Slipped Capital Femoral Epiphysis: Prevalence, Pathogenesis, and Natural History

Background

Obesity is a risk factor for developing slipped capital femoral epiphysis (SCFE). The long-term outcome after SCFE treatment depends on the severity of residual hip deformity and the occurrence of complications, mainly avascular necrosis (AVN). Femoroacetabular impingement (FAI) is associated with SCFE-related deformity and dysfunction in both short and long term.

Questions/Purposes

We examined obesity prevention, early diagnosis, reducing AVN and hip deformity as strategies to reduce SCFE prevalence, and the long-term outcomes after treatment.

Methods

A search of the literature using the PubMed database for the key concepts SCFE and treatment, natural history, obesity, and prevalence identified 218, 15, 26, and 49 abstracts, respectively.

Where Are We Now?

A correlation between rising childhood obesity and increasing incidence of SCFE has been recently reported. Residual abnormal morphology of the proximal femur is currently believed to be the mechanical cause of FAI and early articular cartilage damage in SCFE.

Where Do We Need to Go?

Reducing the increasing prevalence rate of SCFE is important. Treatment of SCFE should aim to reduce AVN rates and residual deformities that lead to FAI to improve the long-term functional and clinical outcomes.

How Do We Get There?

Implementing public health policies to reduce childhood obesity should allow for SCFE prevalence to drop. Clinical trials will evaluate whether restoring the femoral head-neck offset to avoid FAI along with SCFE fixation allows for cartilage damage prevention and lower rates of osteoarthritis. The recently described surgical hip dislocation approach is a promising technique that allows anatomic reduction with potential lower AVN rates in the treatment of SCFE.     

The lateral radiograph is useful in predicting shortening in 31A2 pertrochanteric hip fractures

Background

We sought to determine if angulation or translation measured on the lateral preoperative injury radiographs of patients with 31A2 pertrochanteric fractures is related to excessive postoperative shortening when treated with a sliding hip screw.

Methods

We retrospectively reviewed the radiographs of consecutive patients with hip fractures treated at a level I university trauma centre between 2003 and 2008. Patients with 31A2 pertrochanteric fractures treated with a sliding hip screw were identified through a search of medical records. The study variables were angulation and translation on the preoperative injury lateral radiograph. The outcome measure was radiographic evidence of fracture shortening, measured as the change in length of sliding hip screw visible outside the barrel between the time of fixation and final follow up.

Results

Of the 131 patients treated, 23 met our inclusion criteria and had sufficient follow-up (mean 6.4 mo). The average shortening for 31A2 fractures with angulation on the injury lateral radiograph was 1.83 (95% confidence interval [CI] 1.18–2.47) cm, compared with 0.93 (95% CI 0.49–1.36) cm for fractures with no angulation (p = 0.019). There was no statistical difference in quality of reduction, tip–apex distance, Orthopedic Trauma Association (AO/OTA) classification or incidence of lateral wall fracture across groups based on the presence of angulation.

Conclusion

Angulation on the lateral preoperative injury radiograph may be useful in predicting excessive shortening in 31A2 pertrochanteric fractures. Further investigation is warranted to confirm this result and to identify the role of other predictors, such as fracture comminution.     

More intramedullary nails and arthroplasties for treatment of hip fractures in Sweden: Registry analysis of 144,607 patients, 1998�C2007

Background and purpose

The surgical methods for treatment of femoral neck fractures and trochanteric hip fractures vary. We describe the changes in Sweden over the period 1998–2007 and the regional differences in treatment.

Patients and methods

Data on 144,607 patients were drawn from the National Patient Register.

Results

The proportion of femoral neck fractures treated with arthroplasty increased from 10% in 1998 to 52% in 2007. The use of intramedullary (IM) nails for pertrochanteric fractures increased from 5% to 20%, at the expense of the use of different sliding hip screws. In subtrochanteric fractures, the use of IM nails increased from 32% to 72%. Re-admissions within 180 days due to hip complications were more common after internal fixation for femoral neck fractures than after arthroplasty, and more common after intramedullary nailing of pertrochanteric fractures than after use of sliding hip screws. Treatment varied substantially within Sweden, particularly regarding the use of IM nails.

Interpretation

An increase in arthroplasties reflects an evidence-based treatment rationale for femoral neck fractures, whereas the increase in use of IM nails in pertrochanteric fractures lacks scientific support. The geographic variations call for national treatment guidelines. Further clinical trials are needed to solve the treatment issues regarding per- and subtrochanteric fractures.Intramedullary nails may be taking an increasing share in the treatment of extracapsular fractures in the USA (Anglen and Weinstein 2008). There are few data regarding other countries. The method is promoted at trauma meetings but the scientific basis is not yet convincing (Parker and Handoll 2008). For femoral neck fractures, though, an evidence-based algorithm has been formed (Parker and Gurusamy 2006), with increased use of arthroplasties—at least in the elderly.During the past decade, swift changes in the treatment of hip fractures have taken place in Sweden. We describe the trends in the use of treatment methods for hip fractures in Sweden during the period 1998–2007, including regional differences and re-admissions.     

Post-traumatic coxa vara in children following screw fixation of the femoral neck

Background and purpose

The rare displaced fractures of the femoral neck in children need accurate reduction and rigid fixation. The implants commonly used for internal fixation in children are pins or screws. We evaluated the long-term outcome in children who sustained fractures of the proximal femur that were treated by screw fixation.

Patients and methods

All 22 children (mean age 12 (5–16) years) with fractures of the femoral neck that were treated with screw fixation (mean 2.4 (1–3) screws) at our department between 1990 and 2006 were evaluated. For measurement of outcome, the Harris hip score (HHS) was used and the development of post-traumatic coxa vara was assessed from the difference in the neck-shaft angle postoperatively and at the latest follow-up examination, after mean 4 (2–15) years.

Results

A loss of reduction was observed in 12 patients. There was a statistically significant correlation between the HHS and the changes in the neck-shaft angle.

Interpretation

Loss of reduction was found in more than half of the children. Screw fixation cannot be recommended for the treatment of femoral neck fractures in children due to a substantial number of post-traumatic coxa vara.     

Correlation between radiographic measures of acetabular morphology with 3D femoral head coverage in patients with acetabular retroversion

Background and purpose

Acetabular retroversion may result in anterior acetabular over-coverage and posterior deficiency. It is unclear how standard radiographic measures of retroversion relate to measurements from 3D models, generated from volumetric CT data. We sought to: (1) compare 2D radiographic measurements between patients with acetabular retroversion and normal control subjects, (2) compare 3D measurements of total and regional femoral head coverage between patients and controls, and (3) quantify relationships between radiographic measurements of acetabular retroversion to total and regional coverage of the femoral head.

Patients and methods

For 16 patients and 18 controls we measured the extrusion index, crossover ratio, acetabular angle, acetabular index, lateral center edge angle, and a new measurement termed the “posterior wall distance”. 3D femoral coverage was determined from volumetric CT data using objectively defined acetabular rim projections, head-neck junctions, and 4 anatomic regions. For radiographic measurements, intra-observer and inter-observer reliabilities were evaluated and associations between 2D radiographic and 3D model-based measures were determined.

Results

Compared to control subjects, patients with acetabular retroversion had a negative posterior wall distance, increased extrusion index, and smaller lateral center edge angle. Differences in the acetabular index between groups approached statistical significance. The acetabular angle was similar between groups. Acetabular retroversion was associated with a slight but statistically significant increase in anterior acetabular coverage, especially in the anterolateral region. Retroverted hips had substantially less posterior coverage, especially in the posterolateral region.

Interpretation

We found that a number of 2D radiographic measures of acetabular morphology were correlated with 3D model-based measures of total and regional femoral head coverage. These correlations may be used to assist in the diagnosis of retroversion and for preoperative planning.Acetabular retroversion, a recently described acetabular pathomorphology, is characterized by an acetabulum with excessive tilt in the sagittal plane (Reynolds et al. 1999, Giori and Trousdale 2003, Siebenrock et al. 2003a). Retroversion is believed to result in anterior acetabular over-coverage, which can cause pincer-type femoroacetabular impingement (FAI) with subsequent damage to the anterosuperior labrum and cartilage (Siebenrock et al. 2003b, Banks and Grayson 2007, Tannast et al. 2008). Retroversion is associated with posterior acetabular deficiency (Fujii et al. 2010). Cartilaginous lesions to the posteroinferior region of the acetabulum may result from the contrecoup effect, in which anterior impingement causes subluxation and forces the femoral head posteriorly in the acetabulum in a deleterious manner (Beck et al. 2005).Acetabular retroversion can be difficult to diagnose, and selection of the appropriate treatment strategy presents a challenge. Two-dimensional (2D) radiographs are commonly used to diagnose retroversion and plan treatment (Reynolds et al. 1999, Mast et al. 2004, Jamali et al. 2007, Werner et al. 2010). However, plain radiographs do not quantify the 3-dimensional (3D) relationship between the acetabulum and the femoral head (Clohisy et al. 2009). In addition, radiographic measurements are susceptible to variations in pelvic tilt and poor inter-observer repeatability (Clohisy et al. 2009). 3D models, generated from volumetric CT data, may help to elucidate the magnitude and location of acetabular coverage (Klaue et al. 1988, Dandachli et al. 2009). However, previous studies that have used CT data to estimate coverage have made simplifying assumptions regarding the geometry of the femoral head (Dandachli et al. 2008, 2009), which may have concomitant deformities. Thus, a geometrically accurate comparison between total and regional femoral head coverage in patients with and without acetabular retroversion has not been made.It is unclear how standard 2D radiographic measures relate to measurements from 3D models. Establishment of correlations between radiographic and model-based measurements of coverage in retroverted hips could guide the interpretation of radiographic findings when it is not feasible to obtain 3D models.We (1) compared 2D radiographic measurements between patients with acetabular retroversion (patient group) and normal control subjects (control group), (2) compared 3D measurements of total and regional femoral head coverage between the patient and control groups, and (3) quantified statistical relationships between radiographic measurements of acetabular retroversion and 3D measurements of total and regional coverage of the femoral head.     

Radiological morphology variances of transient osteoporosis of the hip

Background

Although several morphological abnormalities or variances of the hip joint have been proposed to be associated with hip joint degeneration, few studies have investigated any radiological features in patients with transient osteoporosis of the hip (TOH). The purpose of this study is to evaluate the morphological variances of the hip joint in TOH patients radiographically.

Ceramic Liner Fracture and Impingement in Total Hip Arthroplasty

Background

Ceramic-on-ceramic bearing surfaces were developed to provide an alternate to metal-on-polyethylene to decrease wear-induced osteolysis in total hip arthroplasty patients. In an effort to decrease the risk of ceramic acetabular component fracture or damage during implantation, a raised metal rim was added.

Questions/Purposes

How many fractures or impingements have occurred in our population of patients with ceramic liners with raised rims?

Methods

With IRB-approved consent, a case series was reviewed from a single center registry and 4 of 169 patients were identified who had revision hip surgery with the ceramic liner with a raised metal rim: one for ceramic liner fracture and three for metallosis, pain, and squeaking. Implant alignment and operative findings were reviewed.

Results

One ceramic liner fracture and three cases of metallosis from impingement of the femoral neck on the posterior elevated metal rim of the acetabular liner were observed at revision. The femoral neck in each patient had a divot that corresponded to a divot in the posterosuperior liner rim. Three of the four patients had audible squeaking or clicking prior to revision. A total of 3% of patients in this series had clinically significant impingement with this implant type.

Conclusion

Acoustic phenomenon in a ceramic on ceramic bearing surface should be investigated with a cross-table lateral radiograph to evaluate component position. If symptomatic impingement is demonstrated, revision should be considered to avoid failure from metallosis or fracture.

Electronic supplementary material

The online version of this article (doi:10.1007/s11420-014-9415-7) contains supplementary material, which is available to authorized users.Keyword: total hip arthroplasty, ceramic fracture, metallosis, ceramic bearing, acoustic phenomenon     

Factors affecting transfusion requirement after hip fracture: Can we reduce the need for blood?

Background

Hip fractures are common injuries that result in blood loss and frequently require the transfusion of blood products. We sought to identify risk factors leading to increased blood transfusion in patients presenting with hip fractures, especially those factors that are modifiable.

Methods

We retrospectively reviewed the cases of all patients who had fixation of their hip fractures between October 2005 and February 2010. The need for transfusion was correlated with potential risk factors, including age, sex, preoperative hemoglobin, fracture type, fixation method and more.

Results

A total of 835 patients had fixation of their hip fractures during the study period; 631 met the inclusion criteria and 249 of them (39.5%) were transfused. We found an association between need for blood transfusion and female sex (p = 0.018), lower preoperative hemoglobin (p < 0.001), fracture type (p < 0.001) and fixation method (p < 0.001). Compared with femoral neck fractures, there was a 2.37 times greater risk of blood transfusion in patients with intertrochanteric fractures (p < 0.001) and a 4.03 times greater risk in those with subtrochanteric fractures (p < 0.001). Dynamic hip screw (DHS) fixation decreased the risk of transfusion by about half compared with intramedullary nail or hemiarthroplasty. We found no association with age, delay to operation (p = 0.17) or duration of surgery (p = 0.30).

Conclusion

The only modifiable risk factor identified was fixation method. When considering blood transfusion requirements in isolation, we suggest a potential benefit in using a DHS for intertrochanteric and femoral neck fractures amenable to DHS fixation.     

Is the Acetabulum Retroverted in Slipped Capital Femoral Epiphysis?

Background

Recent biplanar radiographic studies have demonstrated acetabular retroversion and increased superolateral femoral head coverage in hips with slipped capital femoral epiphysis (SCFE), seemingly divergent from earlier CT-based studies suggesting normal acetabular version.

Question/purposes

We therefore asked: Are there differences in (1) acetabular version at the superior ¼ of the acetabular dome (AV_sup), (2) acetabular version at the center of the femoral head (AV_cen), and (3) superolateral femoral head coverage (lateral center-edge angle [LCEA]) among affected SCFE hips, unaffected hips, and normal controls?

Methods

We identified 32 patients with SCFE who underwent CT between 2007 and 2012. Twenty-three met our inclusion criteria. Seventy-six age- and sex-matched normal patients comprised the control group. Pelvic rotation, tilt, and inclination were corrected on each CT. AV_sup, AV_cen, and LCEA were measured.

Results

The mean AV_sup of the affected hips (−1.71°) demonstrated retroversion compared to the unaffected hips and the control group; the mean AV_sup of the unaffected hips was similar to that of the normal controls. Mean AV_cen was similar among the three groups. The LCEA was higher in affected and unaffected SCFE hips than in the control group (34.3° versus 34.5° versus 28.9°, respectively), but we found no difference between affected and unaffected hips.

Conclusions

Our data suggest an association of superior acetabular retroversion and increased superolateral femoral head coverage in SCFE. Whether this represents a primary abnormal morphology or a secondary pathologic response remains unclear. Further studies investigating the role of acetabular morphology in SCFE and its implications for development of symptomatic femoroacetabular impingement are warranted.     

Comparison of stable and unstable pertrochanteric femur fractures managed with 2- and 4-hole side plates

Background

Sliding hip screw (SHS) fixation traditionally involves the use of 4-hole side plates; however, 4-hole plates have disadvantages, including longer surgery and greater postoperative pain, and there is little evidence that they provide increased stability. We compared 2- and 4-hole side plates in stable and unstable pertrochanteric fractures.

Methods

We prospectively enrolled consecutive patients with pertrochanteric femoral fractures treated between Jan. 1, 2004, and Apr. 30, 2009, with a 135° SHS using either a 2- or 4-hole side plate, based on surgeon preference.

Results

A total of 327 patients were managed with an SHS device (252 women, 75 men). There were 208 stable fracture patterns (AO/OTA 31 A1, A2.1) and 119 unstable (AO/OTA 31 A2.2, A2.3, A3). We managed 172 patients with 2-hole plates and 155 with 4-hole plates. The average duration of surgery (30.44 v. 51.45 min), blood loss (26.0 v. 31.3 g/L) and transfusion requirements (43% v. 31. 60% transfusion) were significantly lower with the 2-hole than the 4-hole plate. There was no significant difference in length of stay (19 v. 16 d). With stable fractures there was no significant difference in failure rate (6.3% v. 4.9%). In unstable fractures there was a significantly higher rate of failure using 2-hole side plates (24.4% v. 10.8%).

Conclusion

In stable fractures, use of an SHS with a 2-hole side plate results in shorter surgery and less blood loss/transfusion than a 4-hole side plate, with equivalent survival. In unstable fractures, there is a greater than 2-fold rate of failure when a 2-hole side plate is used.     

Cemented Bipolar Hemiarthroplasty Provides Definitive Treatment for Femoral Neck Fractures at 20 Years and Beyond

Background

Displaced femoral neck fractures frequently are treated with bipolar hemiarthroplasties. Despite the frequency with which bipolar hemiarthroplasty is used to treat these fractures, there are few long-term data.

Questions/purposes

We sought to evaluate (1) the cumulative incidence of revision for any reason of bipolar hemiarthroplasties at 20 years, and the proportion of patients who lived more than 20 years who still have the prosthesis in situ from the index arthroplasty, (2) the cumulative incidence of aseptic loosening at 20 years, and (3) the Harris hip score of the surviving patients at long term.

Methods

We performed 376 cemented bipolar hemiarthroplasties for displaced femoral neck fractures in 359 patients between 1976 and 1985. At a minimum of followup of 20 years (mean, 24 years; range, 20–31 years), 339 of 359 patients (94%) were deceased, leaving 20 patients in the study group. Of those, one patient was confirmed to be lost to followup and two others had radiographic followup only. Three hundred fifty-nine patients (99.2%) (376 of the original 379 hips) were followed until death, revision of the hemiarthroplasty, or for at least 20 years (of clinical followup). Bipolar hemiarthroplasty was performed for displaced femoral neck fractures. Cemented fixation was the standard of care between 1976 and 1985 at our institution. The mean age of the patients at the time of surgery was 79 years (range, 60–99 years). The cumulative incidence of revision, estimated with death as a competing risk, and radiographs were evaluated for signs of aseptic loosening by a surgeon not involved in the clinical care of the patients. Clinical function was evaluated with the Harris hip score. The mean age of the patients at the time of surgery was 79 years.

Results

The 20-year cumulative incidence of revision for any reason was 3.5% (95% CI, 1.6%–5.3%). Of the 20 patients who survived more than 20 years, seven had the implant intact. The 20-year cumulative incidence of revision for aseptic loosening was 1.4% (95% CI, 0.2%–2.6%). The mean Harris hip score in patients who were still living and patient who did not have revision surgery was 63 ± 22, however 13 of the 20 patients had undergone revision surgery.

Conclusions

The long-term survivorship of bipolar hemiarthroplasty prostheses used to treat displaced femoral neck fractures in the elderly was high, and the procedure can be considered definitive for the majority of elderly patients with a femoral neck fracture. In this series, 6% (20 patients, 339 of 359) of the patients survived more than 20 years after treatment of a femoral neck fracture with a bipolar hemiarthroplasty. Of those, 35% (seven of 20) survived with their index prosthesis in situ.

Level of Evidence

Level IV, therapeutic study.