Evaluation of Root Canal Configuration of Maxillary Molars in a Brazilian Population Using Cone-beam Computed Tomographic Imaging: An In Vivo Study

Introduction

The aim of this study was to analyze and characterize root canal morphology of maxillary molars of the Brazilian population using cone-beam computed tomographic (CBCT) imaging.

Methods

Patients referred for a CBCT radiographic examination for accurate diagnosis and treatment planning were enrolled in the study. A total of 620 healthy, untreated, fully developed maxillary first and second molars were included (314 first molars and 306 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) fused roots, and (4) primary variations in the morphology of the root canal systems.

Results

First and second molars showed a higher prevalence of 3 separate roots, mesiobuccal, distobuccal, and palatal, with 1 canal in each root (52.87% and 45.09%, respectively). Two canals in the mesiobuccal roots represented 42.63% of teeth, whereas mesiobuccal roots of second molars presented 2 canals in 34.32%. The most common anatomic variation in the maxillary first molar was related to the root canal configuration of the mesiobuccal root, whereas the root canal system of the maxillary second molar teeth showed more anatomic variables.

Conclusions

Mesiobuccal roots of maxillary molar teeth had more variation in their canal system than the distobuccal or palatal roots. The root canal configuration of the maxillary second molars was more variable than the first molars in a Brazilian population. CBCT imaging is a clinically useful tool for endodontic diagnosis and treatment planning.     

The root and root canal anatomy of maxillary molars in a Chinese population

Abstract The purpose of this investigation was to study the prevalence of fused roots, C-shaped roots, C-shaped root canal orifices and C-shaped root canals in the maxillary molars of a Chinese population. A total of 305 first molars and 309 second molars were collected in Taiwan. The teeth were demineralized and placed in methyl salicylate to make them transparent. Root fusion was examined and the pulp chamber floor was checked for C-shaped orifices. Chinese ink was then injected into the root canal system to demonstrate possible C-shaped canals. The maxillary first molars had the palatal root fused with the mesiobuccal root in 0.3% of the cases, and with the distobuccal root in 2.0%. Teeth with C-shaped roots existed in only 0.3% of maxillary first molars, while 6.2% of the maxillary first molars and 40.1% of the maxillary second molars had fused roots. The maxillary second molars had the palatal root fused with the mesiobuccal root in 18.1% and with the distobuccal root in 2.6%; the palatal root was fused with the mesiobuccal and distobuccal root in 8.1% of the material. The maxillary second molars had a C-shaped root in 4.5% and C-shaped root canal orifices with C-shaped root canals in 4.9% of the cases. Fused roots or incompletely separated roots are common in the maxillary second molars amongst Chinese people, while C-shaped roots and root canals in maxillary molars are not frequently seen.     

Root and canal morphology of maxillary first and second permanent molar teeth in a Ugandan population

AIM: To investigate the root and canal morphology of permanent maxillary molar teeth from a Ugandan population. METHODOLOGY: Maxillary first (n = 221) and second molar (n = 221) teeth were collected from patients attending dental clinics in Kampala. Teeth were prepared using a clearing technique: the pulp chambers were accessed and the teeth placed consecutively into 5% sodium hypochlorite, 10% nitric acid, then methyl salicylate. Indian ink was injected into the pulp chambers to demonstrate the canal system. RESULTS: In the first molars, 95.9% of the teeth had separate roots. The mesiobuccal root was fused with the palatal root in 3% of specimens and with the distobuccal root in 0.5% of teeth. In the second molars, 86% of the teeth had separate roots. The mesiobuccal root was fused with the palatal root in 6.3% of specimens and with the distobuccal root in 6.8% of teeth. Apical deltas were more frequent in the mesiobuccal root when compared with distobuccal and palatal roots of both the first and second molars. A type I canal configuration (>75%) was the most frequent in all the roots of both the first and second molars. Canal intercommunications and lateral canals were more frequent in the mesiobuccal root when compared with other roots. CONCLUSIONS: The mesiobuccal root tended to have more variations in the canal system followed by the distobuccal root, whereas the palatal root had the least. The findings in root and canal morphology of this Ugandan population were different from previous studies, which may partly be attributed to racial differences.     

Three Root Canals in the Mesiobuccal Root of Maxillary Molars: Case Reports and Literature Review

Introduction

The knowledge of root canal anatomy is essential to ensure a successful outcome of surgical and nonsurgical root canal treatment. The aims of this article were to present 2 cases of maxillary molars with 3 mesiobuccal root canals and to review the available literature on this anatomic variation.

Methods

The first case described a nonsurgical root canal treatment of tooth #16 in a 29-year-old man with the aid of a dental operating microscope. In the second case, an extracted maxillary right first molar was scanned by a micro–computed tomographic system and reconstructed 3-dimensionally using modeling software.

Results

In both cases, the mesiobuccal root had 3 canals (type 3-2 in case I and type 3-3 in case II), whereas the distobuccal and palatal roots had a single canal. The literature review showed that the overall incidence of 3-canaled mesiobuccal roots in maxillary molars ranged from 1.3%–2.4% and that the most common root canal configuration was type 3-2.

Conclusions

Clinicians should always anticipate the presence of extra canals in maxillary molars and use all the available tools to locate and treat these.     

Clinically Relevant Dimensions of 3-rooted Maxillary Premolars Obtained Via High-resolution Computed Tomography

Introduction

This study aimed to characterize the dimensions of a selection of 3-rooted maxillary premolars through high-resolution computed tomographic analysis considering measures of clinical interest for root canal treatment, such as root wall thickness, canal diameters, and distances between 2 canals in fused roots and between the root apex and foramen.

Methods

Fifteen 3-rooted human maxillary premolars extracted for therapeutic reasons were individually scanned using a high-resolution desktop high-resolution computed tomographic system. Starting from the apical foramen, the selected cross-sectional images corresponding to each millimeter of the roots were evaluated. Measures of clinical interest were determined using Image J software (version 1.41; National Institutes of Health, Bethesda, MD).

Results

Root wall thickness as thin as 0.4 and 0.6 mm was detected in the apical portion of buccal and palatal roots, respectively. In the cervical portion, buccal roots had narrower root walls (0.817–1.670 mm) compared with palatal roots (1.361–2.720 mm). In all thirds, the palatal canal was wider compared with the mesiobuccal and distobuccal canals. In the buccopalatal direction, all roots had thicker root walls toward the furcation, whereas in the mesiodistal direction the mesiobuccal and distobuccal roots had the thinnest walls along their distal and mesial aspects, respectively. Both buccal canals revealed dentin apposition 2 mm from the canal orifice, resulting in cervical constriction. Generally, the distance between the root apex and the foramen was greater in distobuccal roots in comparison with the others with a tendency for foramina to be eccentric.

Conclusions

Three-rooted premolars are a clinical challenge not just because of their low frequency and difficulties regarding diagnosis and root canals access but also because of their fragile roots. These phenomena are critical in terms of the amount of dentin removed during the preparation of root canals and during post space preparation.     

上颌第一磨牙根管系统的研究

目的 观察上颌第一磨牙的根管系统。方法 制备50个上颌第一磨牙透明牙标本,显露根管系统的空间构型,在体视显微镜下观察并记录根管系统的形态,结合应用加以统计。结果 ①上颌第一磨牙近中颊根单根管率为66%,其中Ⅰ型占38%,双根管率为34%,远中颊根Ⅰ型占74%,腭根Ⅰ型占94%。②根管侧支、根尖分歧、根尖分叉多见于近颊根,在近颊根的发生率为40%, 远颊根的发生率为24%,腭根的发生率为6%,发生部位多见于根尖1/3。结论 上颌第一磨牙近颊根的根管系统最为复杂,根管变异较远颊根多,腭根变异最少。     

显微CT法研究上颌第一磨牙根管系统解剖形态

目的 使用显微CT研究上颌第一磨牙根管系统解剖形态.方法 随机收集33颗上颌第一磨牙,使用显微CT扫描后重建根管系统.观察并记录各牙根根管形态和分支根管的发生数目、位置.记录各根管口位置并测量根管口间的距离和所成角度.在距离根尖1、2和3mm处进行虚拟切割,记录断面上分支根管暴露情况.结果 上颌第一磨牙近颊根第二根管发生率为75.76%.近颊根发生分支根管为71.64%;近颊根分支根管发生率为72.73%.91.04%的分支根管发生于根尖1/3段,近颊根距根尖3mm处截面分支根管暴露率为12.12%.近颊根第一、第二根管口间的距离为(1.60±0.41)mm.结论 上颌第一磨牙根管系统解剖形态复杂,近颊根根管形态存在较大解剖变异.     

Root and canal morphology of Thai maxillary molars

AIM: To investigate the root and canal morphology of 268 maxillary permanent molars collected from an indigenous Thai population. METHODOLOGY: The cleaned teeth were accessed, the pulp dissolved by sodium hypochlorite under ultrasonication, and the pulp system injected with Indian ink. The teeth were rendered clear by demineralization and immersion in methyl salicylate. The following observations were made: (i) number of roots and their morphology; (ii) number of root canals per root; (iii) root-canal configuration in each root using Vertucci's classification with additional modifications; and (iv) presence and location of lateral canals and intercanal communications. RESULTS: All the maxillary first and second molars had three separate roots. Only, half (51%) of the maxillary third molars had three separate roots; the other half had fused or conical roots. The majority of the distobuccal (98.1-100%) and palatal (100%) roots had type I canals. Over half of the mesiobuccal roots of first (65%) and second (55%) molars had two canals. The most common (44.2%) canal configuration in mesiobuccal roots of first molars was type IV (two canals, two foramina). A variety of canal types were found in the mesiobuccal roots of second molars. Maxillary third molars showed the greatest diversity of canal morphology. There was an increase in the prevalence of lateral canals towards the apical part of the roots and intercanal communications were present in 16% of each of first, second and third Thai maxillary molars. CONCLUSIONS: The mesiobuccal roots of Thai maxillary molars possessed a variety of canal system types. Over 50% of the first molars had a second mesiobuccal canal. The palatal and distobuccal canals mainly had type I canals. Only, a small proportion (7.3-13.3%) of the roots exhibited lateral canals which were the most common in the apical third     

上颌第二磨牙近中颊根MB2根管的临床研究

目的研究上颌第二磨牙近中颊根第二根管的临床发现率。方法采用改良髓腔入口和探查近中颊根根管口与腭根根管口之间发育沟或暗线的方法研究上颌第二磨牙近中颊根第二根管的肉眼发现率。结果60例患者的64颗上颌第二磨牙中有19颗存在近中颊根第二根管，发现率为29．7％。结论改良髓腔入口和探查近中颊根根管口与腭根根管口之间发育沟或暗线的方法，有利于发现和治疗上颌第二磨牙近中颊根第二根管。     

Root and Root Canal Morphology in Maxillary Second Molar with Fused Root from a Native Chinese Population

Introduction

Root fusion is an anatomic variation in maxillary second molars (MSMs); however, the nature of this canal morphology as it relates to its root anatomy has not been fully clarified. The purpose of this study was to investigate the relationship between features of fused roots and root canal anatomy in MSMs using micro–computed tomographic imaging.

Methods

One hundred eighty-seven extracted MSMs were scanned with the μCT50 (Scanco Medical, Bassersdorf, Switzerland), and their root and canal morphology was classified and analyzed using the classifications proposed by Yang and Vertucci. The number and position of canals that merged were recorded and compared among different root fusion types.

Results

One hundred eight (57.75%) MSMs had 3 separate roots, and 79 (42.25%) had fused roots. Of the 79 fused roots, 22 showed partial canal merging, and 6 had complete canal merging. Canal merging was found with teeth with 3-root fusion more often than in those with 2-root fusion (P < .05). Of 28 merged canals, 16 occurred between mesiobuccal and distobuccal canals and 9 among mesiobuccal, distobuccal, and palatal canals.

Conclusions

MSMs with fused roots may present a complicated root canal system as a result of canal merging.     

Effects of Root Canal Preparation on Apical Geometry Assessed by Micro–Computed Tomography

IntroductionPrevious micro–computed tomography analyses of root canal preparation provided data that were usually averaged over canal length. The aim of this study was to compare preparation effects on apical root canal geometry.MethodsSixty extracted maxillary molars (180 canals) used in prior studies were reevaluated for analyses of the apical 4 mm. Teeth were scanned by using micro–computed tomography before and after canal shaping with FlexMaster, GT-Rotary, Lightspeed, ProFile, ProTaper, instruments or nickel-titanium K-files for hand instrumentation. Apical preparation was to a size #40 in mesiobuccal and distobuccal and #45 in palatal canals except for GT (#20) and ProTaper (#25 in mesiobuccal and distobuccal and #30 in palatal canals, respectively). Data for canal volume changes, the structure model index (quantifying canal cross sections), and untreated surface area were contrasted by using analysis of variance and Scheffé tests.ResultsMean mesiobuccal, distobuccal, and palatal canal volumes increased after preparation (P < .05), but differences were noted for preparation techniques. GT rendered the smallest (0.20 ± 0.14 mm³); K-files and ProFile showed the largest volume increases (0.51 ± 0.20 mm³ and 0.45 ± 021 mm³, P < .05). All canals were slightly rounder in the apical 4 mm after preparation indicated by nonsignificant increases in structure model index. Untreated areas ranged from 4%–100% and were larger in mesiobuccal and palatal canals than in distobuccal ones. Preparation with GT left significantly larger untreated areas in all canal types (P < .05); among root canal types, distobuccal canals had the least amounts of untreated surface areas.ConclusionsApical canal geometry was affected differently by 6 preparation techniques; preparations with GT instruments to an apical size #20 left more canal surface untouched, which might affect the ability to disinfect root canals in maxillary molars.     

上颌第一恒磨牙遗漏根管再治疗的临床分析

目的 探讨上颌第一恒磨牙根管治疗中遗漏根管的原因及对策。方法 上颌第一恒磨牙再治疗中通过插入小号K锉进行X线片偏移投照技术（近中或远中）及手术显微镜下仔细探查髓室底所确认的遗漏根管病例9例，记录再治疗中发现遗漏根管的部位，数量及疏通的根管数目并进行分析。结果 再治疗中发现上颌第一恒磨牙遗漏一个根管病例8例，遗漏两个根管病例1例；遗漏部位为近颇根管1例，近颇舌侧根管（MB2）根管5例，远颇根管2例，腭侧根管1例；再治疗中可重新疏通的遗漏根管7例。结论 上颌第一恒磨牙根管治疗中MB2根管遗漏率较高，遗漏根管的原因主要是根管口钙化及根管结构变异，完全去除髓室项并仔细探查髓宣底及显微超声技术的应用有助于寻找、发现并疏通遗漏根管，术前X线片有助于诊断上颌第一恒磨牙遗漏根管的发生及部位。     

山东地区人离体上颌第二恒磨牙牙根及根管形态观察

目的:观察山东地区人上颌第二恒磨牙牙根及根管形态的解剖特点。方法:于山东地区收集离体上颌第二恒磨牙118个,观察牙根形态及类型;应用透明牙标本法观察根管形态并按Vertucci八分类法对其进行分类。结果:118个上颌第二恒磨牙中以3根分离者为主,占91.52%,牙根融合者共10例,占8.47%,其中融合成2根者为5.08%,主要为近中颊根与远中颊根融合;融合成单根者为3.39%。透明牙标本法下观察根管系统,上颌第二恒磨牙远中颊根及腭根根管以Ⅰ型为主;近颊根根管仅44.95%为Ⅰ型,近颊根第二根管(the second mesiobuccal canal,MB2)的发生率达51.38%。结论:山东地区上颌第二恒磨牙的牙根具有多样性,以3根分离根形态为主,同时可发生各种融合根;其根管形态复杂,MB2的发现率较高。     

Root canal preparation with Endo-Eze AET: changes in root canal shape assessed by micro-computed tomography

AIM: To evaluate the relative performance of Endo-Eze Anatomic Endodontic Technology (AET) stainless steel instruments when shaping maxillary molar root canals in vitro. Methodology Extracted human maxillary molars were scanned, before and after root canal shaping with Endo-Eze AET, employing micro-computed tomography (muCT) at an isotropic resolution of 34 microm. Three-dimensional root canal models were reconstructed and evaluated for volume, surface area, 'thickness' (diameter), canal transportation and prepared surface. Preparation errors such as apical zips, perforations and fractured instruments were visually determined from those models. Means were contrasted using anova and Scheffé post-hoc tests. RESULTS: Volume and surface area increased significantly and similarly in mesiobuccal (mb), distobuccal (db) and palatal (p) canals and gross preparation errors (n = 17) were found. Mean root canal diameters, 5 mm coronal to the apex, increased from 0.31 to 0.52, 0.35 to 0.50 and 0.50 to 0.70 mm for mb, db and p canals, respectively. Mean canal transportation ranged from 0.15 to 0.29, 0.15 to 0.27 and 0.21 to 0.33 mm for apical, middle and coronal root canal levels, respectively, with highest values found for mb canals (P < 0.003). Root canals were significantly straightened during preparation (P < 0.002). CONCLUSIONS: In summary, Endo-Eze AET instruments shaped root canals in maxillary molars with substantial canal transportation, particularly in mesiobuccal root canals. Preparation with this instrument removed high volumes of dentine, even though apical preparation was size 30. Based on the current results, Endo-Eze AET cannot be recommended for the preparation of teeth with curved root canals.     

上颌第一恒磨牙变异根管的诊治

目的探讨上颌第一恒磨牙变异根管在根管治疗中的诊断及治疗对策。方法1例上颌第一恒磨牙的再治疗病例，清理髓腔后在手术显微镜下超声器械小心钻磨髓室底，牙髓探针仔细探查，在近中侧发现第二个腭侧根管口，近颊根近舌根管与近颊根管融合，常规逐步后退法预备探查到的4个根管，冷牙胶侧方加压技术充填根管。结果术后10个月复查，患者无主观症状，患牙能正常行使功能，X线片显示根尖无病变，临床检查患牙无异常表现。结论术前X线片对于上颌第一恒磨牙变异根管的诊断及发生部位的确定有较大帮助，治疗中完全去除髓室顶、仔细探查髓室底和显微超声技术的应用有助于寻找、发现并疏通遗漏根管。     

Detection of the second mesiobuccal canal in mesiobuccal roots of maxillary molar teeth ex vivo

AIM: To assess the effectiveness of magnification and dentine removal (troughing) when locating the second mesiobuccal canal in mesiobuccal roots of maxillary molars. METHODOLOGY: A total of 208 extracted human maxillary molars were examined. After crown and pulp removal, the MB1 and 2 canals in the mesiobuccal root were located in three stages that were performed by two undergraduate dental students. Stage 1: canals were located with an endodontic explorer; stage 2: additional canals in the same teeth were located under magnification with a digital microscope (VH-8000, Keyence, Japan); stage 3: additional canals in the same teeth were located by removing dentine (troughing) from the pulp chamber floor within 3 mm from MB1 canal towards the palatal canal with an Enac ultrasonic tip (ST 21, Osada, Japan). In each group, the canals were prepared with Gates Glidden burs and K-files. The distal and palatal roots were then removed, and Indian ink was injected into the canal system within the mesio-buccal root. The root surfaces were washed with 6% NaOCl, and then rendered transparent to observe canal morphology. The root canal configurations were classified into five categories following the modified Weine's classification. RESULTS: More than one canal in the mesio-buccal root was observed in 48% of specimens. Detection rates of multiple canals were 7, 18 and 42% following stages 1, 2 and 3, respectively. There was a significant difference between the stages for detecting the MB2 canal (P < 0.05, Friedman test). CONCLUSIONS: Both magnification (stage 2) and dentine removal under magnification (stage 3) were effective in detecting the presence of the MB2 canal. However, MB2 canals could not be detected in 13% of the teeth because of canal calcification or branching located more apically.     

Root and canal morphology of the mesiobuccal and distal roots of permanent first molars in a Kuwait population--a clinical study

Aim To identify the number of roots and canal configurations in permanent first molars of the indigenous Kuwaiti sub‐population and compare them against a similar group of non‐Kuwaiti population in different age groups and gender, and to determine the frequency of a second canal in the mesiobuccal root of maxillary first molars and distal root of mandibular first molars that could be located and treated in routine practice without using magnification or special lighting conditions. Methodology A total of 220 permanent first molar teeth of patients scheduled for root canal treatment over a period of 1 year were included. Patients were identified and grouped according to their nationality as Kuwaiti and non‐Kuwaiti (which included Filipinos, Indonesian Indians, Srilankans, Egyptians, Saudi Arabians and Syrians). In both nationality groups, patients were successively distributed into four groups based on their age. The first age group included patients below 20 years, the second 21–30 years, the third 31–40 years and the fourth were over 40 years. The first three groups comprised of 15 male and 15 female patients whilst the fourth group had 10 patients of each gender. Teeth with open apices, resorptions and calcification were excluded from the study. The teeth included were both clinically and radiographically examined for number of roots, the canal configuration and the presence of the additional mesiobuccal and distal canals and recorded. The simplified classification of canal configurations proposed by Weine was utilized. Results The incidence of a second canal in the mesiobuccal (MB) root of maxillary first molars and the distal root of mandibular first molars was not influenced significantly by nationality and gender. All the 110 maxillary first molars treated had three roots; 58% of MB root had one canal and 42% had two canals. The majority of the mesial roots had Weine type II canal configuration when the second mesiobuccal canal was present. All distobuccal and palatal roots had a single or type I canal configuration. Of the 110 mandibular first molars that were treated, 96% had two roots and 4% had three roots. When present, the third root was located either buccal or lingual to the main distal root. Overall 51% of the single distal roots had one canal whilst 49% had two canals. The mesial root frequently had a Weine type II canal configuration as did the distal root when a second canal was present. Pearson’s correlation analysis of both molars revealed a significant (P < 0.05) negative correlation (r = ?0.274, r = ?0.144) between age and number of canals as well as the type of canal. Conclusions The incidence of a second canal in distal roots of permanent mandibular first molars was 49% in the Kuwaiti population and this was similar to other Asian ethnic populations. Adopting modified access and troughing procedures revealed a 42% frequency of MB2 canals in maxillary first molars. The incidence of a second canal in both mesiobuccal roots of maxillary molars and distal roots of mandibular molars decreased significantly with age; no differences were noticed amongst the nationalities and gender studied. The possibility of extra roots should be anticipated in mandibular molars.     

ASSESSMENT OF CANAL WALLS AFTER BIOMECHANICAL PREPARATION OF ROOT CANALS INSTRUMENTED WITH PROTAPER UNIVERSAL? ROTARY SYSTEM

Objective:

The aim of this study was to examine the instrumented walls of root canals prepared with the ProTaper Universal™ rotary system.

Material and Methods:

Twenty mesiobuccal canals of human first mandibular molars were divided into 2 groups of 10 specimens each and embedded in a muffle system. The root canals were transversely sectioned 3 mm short of the apex before preparation and remounted in their molds. All root canals were prepared with ProTaper Universal™ rotary system or with Nitiflex™ files. The pre and postoperative images of the apical thirds viewed with a stereoscopic magnifier (×45) were captured digitally for further analysis. Data were analyzed statistically by Fisher''s exact test and Chi-square test at 5% significance level.

Results:

The differences observed between the instrumented and the noninstrumented walls were not statistically significant (p<0.05).

Conclusions:

The Nitiflex™ files and the ProTaper Universal™ rotary system failed to instrument all the root canal walls.     

Canal configuration of the mesiobuccal root of the maxillary first molar of a Japanese sub-population

AIM: The aim of this study was to determine the percentage of anatomical canal configurations of the mesiobuccal root of the maxillary first molar in Japanese patients. METHODOLOGY: Three hundred teeth were obtained from general dentists who knew absolutely that they were extracted from Japanese patients. The distobuccal and palatal roots were amputated for radiographic convenience. Preoperative radiographs were taken of the remaining crown and mesiobuccal root (MBR) from mesiodistal and buccopalatal directions for each tooth. Routine endodontic access cavities were prepared and size 08 files were placed through the orifice into the MBR until they were seen at the apex. In some cases preparation of the canal orifice with a long shank round burr was necessary to gain access. In seven teeth, no access to the apex was possible and these teeth were eliminated. In the other 293 teeth, the MBR canal(s) was (were) enlarged up to size 15 file. If another canal opening was found at the apex a 08 file was inserted into the second opening and passed coronally. Postoperative radiographs with file(s) in place were taken from the two directions, as before. RESULTS: Of the 293 teeth, 123 (42.0%) were Type II, 89 (30.4%) showed Type III systems and 10 (3.4%) were Type IV. Suggestions for identification and treatment of the second canal in the MBR are presented. CONCLUSIONS: The proportion of cases with two canals in the mesiobuccal root of maxillary first molars from Japanese patients was high and similar to that described from studies of other ethnic populations.     

上颌第一磨牙远颊双根管1例

上颌第一磨牙根管系统复杂多样,近颊根双根管发生率较高,而远颊根少有双根管报道。本文报道1例具有5根管的上颌第一磨牙（其中近颊及远颊根各2个根管）。