Rotator cuff tears: assessment with MR arthrography in 275 patients with arthroscopic correlation

We assessed the diagnostic performance of magnetic resonance (MR) arthrography in the diagnosis of articular-sided partial-thickness and full-thickness rotator cuff tears in a large symptomatic population. MR arthrograms obtained in 275 patients including a study group of 139 patients with rotator cuff tears proved by arthroscopy and a control group of 136 patients with arthroscopically intact rotator cuff tendons were reviewed in random order. MR imaging was performed on a 1.0 T system (Magnetom Expert, Siemens). MR arthrograms were analyzed by two radiologists in consensus for articular-sided partial-thickness and full-thickness tears of the supraspinatus, infraspinatus, and subscapularis tendons. At arthroscopy, 197 rotator cuff tears were diagnosed, including 105 partial-thickness (93 supraspinatus, nine infraspinatus, three subscapularis) and 92 full-thickness (43 supraspinatus, 20 infraspinatus, 29 subscapularis) tendon tears. For full-thickness tears, sensitivity, specificity, and accuracy were 96%, 99%, and 98%, respectively, and for partial tears 80%, 97%, and 95%, respectively. False negative and positive assessments in the diagnosis of articular-sided partial-thickness tears were predominantly [78% (35/45)] observed with small articular-sided (Ellman grade1) tendon tears. MR arthrography is highly accurate in the diagnosis of full-thickness rotator cuff tears and is accurate in the diagnosis of articular-sided partial-thickness tears. Limitations in the diagnosis of partial-thickness tears are mainly restricted to small articular-sided tears (Ellman grade 1) due to difficulties in differentiation between fiber tearing, tendinitis, synovitic changes, and superficial fraying at tendon margins.     

Comparison of Three-Dimensional Isotropic and Two-Dimensional Conventional Indirect MR Arthrography for the Diagnosis of Rotator Cuff Tears

Objective

To compare the accuracy between a three-dimensional (3D) indirect isotropic T1-weighted fast spin-echo (FSE) magnetic resonance (MR) arthrography and a conventional two-dimensional (2D) T1-weighted sequences of indirect MR arthrography for diagnosing rotator cuff tears.

Materials and Methods

The study was approved by our Institutional Review Board. In total, 205 patients who had undergone indirect shoulder MR arthrography followed by arthroscopic surgery for 206 shoulders were included in this study. Both conventional 2D T1-weighted FSE sequences and 3D isotropic T1-weighted FSE sequence were performed in all patients. Two radiologists evaluated the images for the presence of full- or partial-thickness tears in the supraspinatus-infraspinatus (SSP-ISP) tendons and tears in the subscapularis (SSC) tendons. Using the arthroscopic findings as the reference standard, the diagnostic performances of both methods were analyzed by the area under the receiver operating characteristic curve (AUC).

Results

Arthroscopy confirmed 165 SSP-ISP tendon tears and 103 SSC tendon tears. For diagnosing SSP-ISP tendon tears, the AUC values were 0.964 and 0.989 for the 2D sequences and 3D T1-weighted FSE sequence, respectively, in reader I and 0.947 and 0.963, respectively, in reader II. The AUC values for diagnosing SSC tendon tears were 0.921 and 0.925, respectively, for reader I and 0.856 and 0.860, respectively, for reader II. There was no significant difference between the AUC values of the 2D and 3D sequences in either reader for either type of tear.

Conclusion

3D indirect isotropic MR arthrography with FSE sequence and the conventional 2D arthrography are not significantly different in terms of accuracy for diagnosing rotator cuff tears.     

Supraspinatus tendon tears: comparison of 3D US and MR arthrography with surgical correlation

Objective

The objective of the study was to compare the diagnostic reliability of 3D US with MR arthrography in diagnosing supraspinatus tendon tears, with arthroscopic findings used as the standard.

Materials and methods

In a prospective study 50 patients who later underwent arthroscopic surgery of the rotator cuff were examined pre-operatively by 3D US with MR arthrography. The presence or absence of a full- or partial-thickness supraspinatus tendon tear and the tear size as demonstrated by each imaging and arthroscopy was recorded. The tear size was divided into three grades: small (<1 cm), medium (1-3 cm), and large (>3 cm).

Results

The arthroscopic diagnosis was a full-thickness tear in 40 patients, partial-thickness tears in 5, and intact supraspinatus tendon in 5. 3D US correctly diagnosed 35 out of 40 full-thickness tears and MR arthrography 39 out of 40 full-thickness tears. Regarding partial-thickness tears, 3D US underestimated 2 cases as no tear and overestimated 1 case as a full-thickness tear. MR arthrography underestimated 1 case as a partial-thickness tear and overestimated 2 cases as full-thickness and partial-thickness tears respectively. 3D US and MR arthrography yield a sensitivity for full-thickness tears of 87.5% and 97.5% with specificity of 90.0% and 90.0%. Based on the grading system, 3D US measurements correctly predicted the tear size of 23 (65.7%) of the 35 full-thickness tears and MR arthrography 30 (75.0%) of the 39 full-thickness tears.

Conclusion

Three-dimensional ultrasound seems to be a promising imaging modality comparable to MR arthrography for the assessment of the supraspinatus tendon tears.     

Learning curve of office-based ultrasonography for rotator cuff tendons tears

Purpose

To compare the accuracy of ultrasonography and MR arthrography (MRA) imaging in detecting of rotator cuff tears with arthroscopic finding used as the reference standard.

Methods

The ultrasonography and MRA findings of 51 shoulders that underwent the arthroscopic surgery were prospectively analysed. Two orthopaedic doctors independently performed ultrasonography and interpreted the findings at the office. The tear size measured at ultrasonography and MRA was compared with the size measured at surgery using Pearson correlation coefficients (r). The sensitivity, specificity, accuracy, positive predictive value, negative predictive value and false-positive rate were calculated for a diagnosis of partial-and full-thickness rotator cuff tears. The kappa coefficient was calculated to verify the inter-observer agreement.

Results

The sensitivity of ultrasonography and MRA for detecting partial-thickness tears was 45.5 and 72.7 %, and that for full-thickness tears was 80.0 and 100 %, respectively. The accuracy of ultrasonograpy and MRA for detecting partial-thickness tears was 45.1 and 88.2 %, and that for full-thickness tears was 82.4 and 98 %, respectively. Tear size measured based on ultrasonography examination showed a poor correlation with the size measured at arthroscopic surgery (r = 0.21; p < 0.05). However, tear size estimated by MRA showed a strong correlation (r = 0.75; p < 0.05). The kappa coefficient was 0.47 between the two independent examiners.

Conclusions

The accuracy of office-based ultrasonography for beginner orthopaedic surgeons to detect full-thickness rotator cuff tears was comparable to that of MRA but was less accurate for detecting partial-thickness tears and torn size measurement. Inter-observer agreement on the interpretation was fair. These results highlight the importance of the correct technique and experience in operation of ultrasonography in shoulder joint.

Level of evidence

Diagnostic study, Level II.     

Improved outcomes with arthroscopic repair of partial-thickness rotator cuff tears: a systematic review

Purpose

The optimum treatment strategy for the surgical management of partial-thickness rotator cuff tears (PTRCT) is evolving. In this study, two research questions were sought to be answered: “Does the repair technique for PTRCTs involving >50% of the tendon thickness have an effect on structural and functional outcomes of arthroscopic repair?” and “Is there a difference in outcomes of arthroscopically treated articular- and bursal-sided PTRCTs?”.

Methods

A systematic review according to the PRISMA statement was conducted to identify all literature published reporting on outcomes of arthroscopic treatment of PTRCTs classified with the Ellman classification with minimum 2-year follow-up. Prospective randomized trials were eligible for quantitative synthesis. A total of 19 studies, published between 1999 and 2015, met the inclusion criteria of this systematic review. Two studies reporting outcomes of articular-sided PTRCTs with prospective randomized study design were included in quantitative synthesis calculations.

Results

Arthroscopic repair of PTRCTs >50% thickness results in significant pain relief and good to excellent functional outcomes. When in situ repair was compared with repair of the tendon after completion to full-thickness RCT, there were no significant differences in functional or structural outcomes or complication rates. The best treatment method for low-grade PTRCTs remains unclear.

Conclusions

The repair technique (in situ repair versus repair of the tendon after completion to full-thickness RCT) did not significantly affect the outcomes for arthroscopic repair of PTRCTs >50% thickness. The current literature contains evidence for inferior outcomes and higher failure rates after arthroscopic debridement of bursal-sided compared to articular-sided PTRCTs, and some evidence suggests that repair of lower-grade bursal-sided tears may be beneficial over debridement.

Level of evidence

IV.

     

The usefulness of the three-dimensional enhanced T1 high-resolution isotropic volume excitation MR in the evaluation of shoulder pathology: comparison with two-dimensional enhanced T1 fat saturation MR

Objective:

To evaluate the diagnostic accuracy of three-dimensional (3D) enhanced T₁ high-resolution isotropic volume excitation (eTHRIVE) shoulder MR for variable shoulder pathology such as rotator cuff tear, labral injury and synovial pathology in comparison with two-dimensional enhanced fast spin echo T₁ fat saturation (2D T1 FS) sequences MR.

Methods:

This retrospective study included 86 patients who underwent MRI of the shoulder using eTHRIVE technique. Two radiologists evaluated anatomic identification of the supraspinatus, glenoid labrum and acromioclavicular joint (AC joint) on routine MRI sequences (2D T1 FS) and compared them with the reformatted eTHRIVE images. Subjective scoring of the images was performed with a four-point scale that rated the degree of discrimination of the shape of the supraspinatus, glenoid labrum and AC joint. The diagnostic accuracy of eTHRIVE compared with routine MR images was evaluated in terms of rotator cuff pathology, labral pathology and synovial pathology.

Results:

Anatomic identification scores of the supraspinatus tendon and labrum were significantly lower for eTHRIVE than for 2D T1 FS. There were no significant differences between eTHRIVE and 2D T1 FS in anatomic identification of the AC joint. There were no significant differences between eTHRIVE and 2D T1 FS in diagnosing the three disease categories.

Conclusion:

eTHRIVE had comparable diagnostic accuracy to 2D T1 FS imaging in the evaluation of rotator cuff tears, labral injury and synovial pathology, but anatomic identification was inferior to that of 2D T1 FS.

Advances in knowledge:

The accuracy of 3D eTHRIVE imaging is comparable to that of 2D T1 FS for the diagnosis of rotator cuff tears, labral injury and synovial pathology.     

Fast MR arthrography using VIBE sequences to evaluate the rotator cuff

Purpose  The purpose of this paper was to evaluate if short volumetric interpolated breath-hold examination (VIBE) sequences can be used as a substitute for T1-weighted with fat saturation (T1-FS) sequences when performing magnetic resonance (MR) arthrography to diagnose rotator cuff tears. Materials and methods  Eighty-two patients underwent direct MR arthrography of the shoulder joint using VIBE (acquisition time of 13 s) and T1-FS (acquisition time of 5 min) sequences in the axial and paracoronal plane on a 1.0-T MR unit. Two radiologists scored rotator cuff tendons on VIBE and T1-FS images separately as normal, small/large partial thickness and full thickness tears with or without geyser sign. T1-FS sequences were considered the gold standard. Surgical correlation was available in a small sample. Results  Sensitivity, specificity, and positive and negative predictive values of VIBE were greater than 92% for large articular-sided partial thickness and full thickness tears. For detecting fraying and articular-sided small partial thickness tears, these parameters were 55%, 94%, 94%, and 57%, respectively. The simple kappa value was 0.76, and the weighted kappa value was 0.86 for agreement between T1-FS and VIBE scores. All large partial and full thickness tears at surgery were correctly diagnosed using VIBE or T1-FS MR images. Conclusion  Fast MR arthrography of the shoulder joint using VIBE sequences showed good concordance with the classically used T1-FS sequences for the appearance of the rotator cuff, in particular for large articular-sided partial thickness tears and for full thickness tears. Due to its very short acquisition time, VIBE may be especially useful when performing MR arthrography in claustrophobic patients or patients with a painful shoulder.     

肩袖损伤的MRI诊断比较研究

目的:比较常规MRI和MRI间接关节造影检查对肩袖撕裂伤的诊断价值.方法:搜集2002年11月～2006年8月共40例肩袖损伤病例,20例行常规MRI检查,20例行MRI间接关节造影检查.以肩关节镜作为诊断标准,比较两种影像学方法诊断肩袖损伤的敏感性和特异性.结果:肩袖完全撕裂中,常规MRI检查的敏感度为45.5%,特异度为66.7%,准确度为55%;MRI间接关节造影的敏感度为92.3%,特异度为85.7%,准确度为90%.肩袖不全撕裂中,常规MRI检查敏感度为57.1%,特异度为53.8%,准确度为55%;而间接关节造影敏感度为83.3%,特异度为92.8%,准确度则为90%.经Fisher确切概率统计法统计,MRI间接关节造影诊断肩袖全层撕裂敏感性及准确性明显高于常规MRI(P＜0.05),在诊断肩袖部分撕裂时,MRI间接关节造影的特异性及准确性明显高于MRI(P＜0.05).结论:MRI间接关节造影较常规MRI诊断肩袖撕裂准确性较高.同时对盂唇等其它病变诊断有帮助.     

Ultrasonography of symptomatic rotator cuff tears compared with MR imaging and surgery

Purpose

To compare the accuracy of ultrasonography and magnetic resonance imaging in the detection of rotator cuff tears.

Materials and methods

Ninety-six patients with clinically suspected rotator cuff pathology underwent ultrasonography and magnetic resonance imaging of the shoulder. The findings in 88 patients were compared with arthroscopy or open surgery.

Results

Full-thickness tear was confirmed in 57 cases, partial-thickness tear in 30 cases and degenerative changes without tear in 1. In all 57 cases of full-thickness tear and in 28 out of 30 cases of partial-thickness tear the supraspinatus tendon was involved. The accuracy in the detection of full-thickness tears was 98 and 100% for ultrasonography and magnetic resonance imaging, respectively. The accuracy in the detection of bursal or articular partial-thickness tears was 87 and 90% for ultrasonography and magnetic resonance imaging, respectively.

Conclusions

In experienced hands ultrasonography should be considered as an accurate modality for the initial investigation of rotator cuff, especially supraspinatus, tears.     

Comparison of the MR findings on indirect MR arthrography in patients with rotator cuff tears with and without symptoms

Purpose To compare indirect magnetic resonance (MR) arthrography findings in patients with rotator cuff tears with and without symptoms. Materials and Methods Indirect MR arthrography results of 15 asymptomatic and 23 symptomatic rotator cuff tears were retrospectively reviewed, comparing the type and size of tears and amount of subacrominal-subdeltoid bursal fluid. Results There were 14 partial-thickness tears and one full-thickness tear in the asymptomatic group, with 4 small and 11 medium tears. In the symptomatic group, there were 16 partial-thickness and 7 full-thickness tears, with 14 small, 5medium, and 4 large tears. In the asymptomatic group, the amount of subacrominal-subdeltoid bursal fluid was grade 0, 6 patients; grade 1, 6 patients; grade 2, 2 patients; and grade 3, 1 patient. In the symptomatic group, the amount of subacrominal-subdeltoid bursal fluid was grade 0, 4 patients; grade 1, 3 patients; grade 2, 8 patients; and grade 3, 8 patients. We found no statistically significant difference between symptomatic and asymptomatic tears in the kind and size of tears, and in the amount of subacrominal-subdeltoid bursal fluid. Conclusion We found no difference in the MR findings between symptomatic and asymptomatic rotator cuff tears.     

Supraspinatus tendon tears at 3.0?T shoulder MR arthrography: diagnosis with 3D isotropic turbo spin-echo SPACE sequence versus 2D conventional sequences

Objective

To assess the diagnostic performance of shoulder MR arthrography with 3D isotropic fat-suppressed (FS) turbo spin-echo sequence (TSE-SPACE) for supraspinatus tendon tears in comparison with 2D conventional sequences at 3.0?T.

Materials and methods

The study was HIPAA-compliant and approved by the institutional review board with a waiver of informed consent. Eighty-seven arthroscopically confirmed patients who underwent 3.0?T shoulder MR arthrography with 2D sequences and 3D TSE-SPACE were included in a consecutive fashion from March 2009 to February 2010. Two reviewers independently analyzed 2D sequences and 3D TSE-SPACE. Sensitivity, specificity, accuracy, and interobserver agreement (κ) were compared between 2D sequences and 3D TSE-SPACE for full-thickness and partial-thickness supraspinatus tendon tears together and for partial-thickness supraspinatus tendon tears alone.

Results

There were 33 full-thickness tears and 28 partial-thickness tears of supraspinatus tendons. For full-thickness and partial-thickness supraspinatus tendon tears together, the mean sensitivity, specificity, and accuracy of both readers were 96, 92, and 94% on 2D sequences and 91, 84, and 89% on 3D TSE-SPACE. For partial-thickness supraspinatus tendon tears alone, the mean sensitivity, specificity, and accuracy were 95, 92, and 94% on 2D sequences and 84, 85, and 84% on 3D TSE-SPACE. There was no statistical difference between 2D sequences and 3D TSE-SPACE. Interobserver agreements were almost perfect on 2D conventional sequences and substantial on 3D TSE-SPACE.

Conclusion

Compared with 2D conventional sequences, MR arthrography using 3D TSE-SPACE was comparable for diagnosing supraspinatus tendon tears despite limitations in detecting small partial-thickness tears and in discriminating between full-thickness and deep partial-thickness tears.     

Evaluation of Rotator Cuff Tendon Tears: Comparison of Multidetector CT Arthrography and 1.5-T MR Arthrography

Purpose: To compare the diagnostic performance of multidetector computed tomographic (CT) arthrography and 1.5-T magnetic resonance (MR) arthrography in the evaluation of rotator cuff lesions, with arthroscopic correlation. Materials and Methods: This study was approved by the institutional ethical committee, and informed consent was obtained from all patients. CT and MR arthrographic images prospectively obtained in 56 consecutive patients, following the same arthrographic procedure, were independently evaluated by two radiologists. Arthroscopy, performed within 1 month of the imaging, was used as the reference standard. Sensitivity and specificity of CT and MR arthrography were compared by using the McNemar test. Interobserver and intertechnique agreement for detecting rotator cuff lesions were measured and compared with κ and Z statistics. The Bland-Altman method was used to determine interobserver and intertechnique agreement for measuring tendon tears. For grading fatty infiltration of rotator cuff muscles, κ and Z statistics were used. Results: There was no statistically significant difference in sensitivity and specificity between CT arthrography and MR arthrography in depiction of rotator cuff lesions. The respective sensitivity and specificity of CT arthrography were 92% and 93%-97% for the supraspinatus, 100% and 77%-79% for the infraspinatus, 75%-88% and 85%-90% for the subscapularis, and 55%-65% and 100% for the biceps tendon. The respective sensitivity and specificity of MR arthrography were 96% and 83%-93% for the supraspinatus, 88%-100% and 81%-83% for the infraspinatus, 75%-88% and 90%-100% for the subscapularis, and 65%-85% and 100% for the biceps tendon. Interobserver agreement was substantial to almost perfect (κ = 0.744-0.964 for CT arthrography; κ = 0.641-0.893 for MR arthrography), and intertechnique agreement was almost perfect (κ > 0.819). CT and MR arthrography both yielded moderate interobserver and intertechnique agreement for measuring rotator cuff tears and grading muscle fatty infiltration. Conclusion: Data suggest that CT and MR arthrography have similar diagnostic performance for the evaluation of rotator cuff tendon tears. ? RSNA, 2012.     

Tears at the rotator cuff footprint: prevalence and imaging characteristics in 305 MR arthrograms of the shoulder

Objectives  

To evaluate the prevalence, imaging characteristics and anatomical distribution of tears at the rotator cuff (RC) footprint with MR arthrography (MR-A) of the shoulder.     

Comparison of 3.0-T MR vs 3.0-T MR arthrography of the hip for detection of acetabular labral tears and chondral defects in the same patient population

Objective:

We report our experience in diagnostic sensitivity of 3.0-T conventional MR vs 3.0-T MR arthrography of the hip for detection of acetabular labral tears and chondral defects in the same patient population.

Methods:

43 consecutive patients had both conventional hip MR and MR arthrography examinations performed. These examinations were reviewed retrospectively by independent reading of two musculoskeletal radiologists who read the MR and MR arthrogram examinations in a randomized fashion (i.e. MR and MR arthrogram examinations were read at separate sittings and in a randomized fashion so as not to bias reviewers). Scans were assessed for acetabular labral tears and chondral defects. All patients went on to arthroscopy.

Results:

Of these 43 patients, 40 had acetabular labral tears read by Reader 1 and 39 had acetabular labral tears read by Reader 2 on MR arthrogram, 39 had acetabular labral tears read by Reader 1 and 38 had acetabular labral tears read by Reader 2 on conventional MR examination. There were 42 labral tears in 43 patients at arthroscopy. There were four false-negative labral tears compared with arthroscopy on MR and three false negatives on MR arthrography for Reader 1 and five false negatives on MR and four false negatives on MR arthrography for Reader 2. Each reader had one false-positive labral tear compared with arthroscopy on both MR and MR arthrography. There were 32 acetabular chondral defects at arthroscopy. Reader 1 saw 21 acetabular chondral defects on conventional MR and 27 chondral defects at MR arthrography. Reader 2 saw 19 acetabular chondral defects at conventional MR and 25 acetabular chondral defects on MR arthrography. There were no false-positive readings of chondral defects compared with arthroscopy on MR and one false positive for Reader 1 and two false positives for Reader 2 on MR arthrography as compared with arthroscopy. On conventional MR examination, sensitivities and specificities as compared with arthroscopy were as follows: Reader 1 acetabular labral tear (90% sensitivity, 0% specificity) and Reader 2 acetabular labral tear (88% sensitivity, 0% sensitivity). On MR arthrogram, sensitivities and specificities as compared with arthroscopy for Reader 1 were 93%, 0% and for Reader 2 were 90%, 0%, respectively. Sensitivities and specificities for detection of acetabular chondral defects as compared with arthroscopy were Reader 1 conventional MR (65% sensitivity, 100% specificity), Reader 1 MR arthrography (81% sensitivity, 91% specificity), Reader 2 conventional MR (59% sensitivity, 100% specificity) and Reader 2 MR arthrography (71% sensitivity, 82% specificity).

Conclusion:

In this series, 3.0-T MR demonstrated sensitivity for detection of acetabular labral tears that rivals the sensitivity of 3.0-T MR arthrography of the hip. In this series, 3.0-T MR arthrography was more sensitive than conventional 3.0-T MR for detection of acetabular chondral defects.

Advances in knowledge:

3.0-T MR and MR arthrography are near equivalent in the diagnosis of acetabular labral tears. This information is useful for pre-operative planning.MR arthrography has been reported to be more sensitive and specific for detection of acetabular labral tears in the hip than conventional MRI.^1–10 MR arthrography has also been reported to be superior in detection of acetabular cartilage defects as compared with conventional MRI.¹¹ To our knowledge 3.0-T MR vs 3.0-T MR arthrography sensitivity for detection of acetabular labral tears and chondral defects has not been specifically assessed.To our knowledge, Petersilge et al¹ first reported the utility of hip MR arthrography in the diagnosis of acetabular labral tears. Toomayan et al² compared MR arthrography of the hip with conventional MRI of the hip in different patient populations. He found MR arthrography with a small field of view to be substantially more sensitive for detection of acetabular labral tears than conventional MRI. Sutter et al¹¹ found 1.5 T MR arthrography to be superior to conventional MRI for detecting labral tears and acetabular cartilage defects.Patients with acetabular labral tears present with symptoms of persistent pain, clicking, locking and decreased range of motion. With the availability of hip arthroscopy, labral tears can more easily be addressed with minimally invasive surgery. Accurate pre-operative identification of labral tears is needed.² Based on previous studies demonstrating the accuracy of MR arthrography in detection of acetabular labral tears, surgeons often request MR arthrography of the hip to characterize labral tears prior to surgery.^1–10 The purpose of this study is to assess 3.0-T MR vs MR arthrography diagnostic performance in detection of acetabular labral tears and chondral defects in the same patient population using arthroscopy as a reference standard.     

MR arthrography of the shoulder: comparison with conventional MR imaging

Twenty-three patients underwent both conventional MR imaging of the shoulder and MR shoulder arthrography for clinically suspected labral or rotator cuff abnormalities. Images obtained before and after contrast administration were studied independently, and without knowledge of clinical findings, by two radiologists for the presence of abnormalities of the glenoid labrum or rotator cuff. Results were correlated with surgical findings in all patients. Nine patients had surgically proved labral tears. MR arthrography detected all nine labral abnormalities, while six of the nine were missed on conventional MR imaging. Fourteen patients had surgically proved rotator cuff tears. MR arthrography detected 11 of the 14 tears and missed three partial tears on the bursal surface. Conventional MR imaging detected nine cuff tears and missed five tears; two of these were complete rotator cuff tears and three were partial tears of the undersurface of the rotator cuff. Our results suggest that MR arthrography enhances the accuracy of MR in the evaluation of the glenoid labrum and rotator cuff tendon.     

Tear progression of symptomatic full-thickness and partial-thickness rotator cuff tears as measured by repeated MRI

Purpose

The purpose of this study was to analyse the natural course of symptomatic full-thickness and partial-thickness rotator cuff tears treated non-operatively and to identify risk factors affecting tear enlargement.

Methods

One hundred and twenty-two patients who received non-surgical treatment for a partial- or full-thickness supraspinatus tear were included in this study. All rotator cuff tears were diagnosed with magnetic resonance imaging (MRI), and the same modality was used for follow-up studies. Follow-up MRI was performed after at least a 6-month interval. We evaluated the correlation between tear enlargement and follow-up duration. Eleven risk factors were analysed by both univariate and multivariate analyses to identify factors that affect enlargement of rotator cuff tears. The mean follow-up period was 24.4 ± 19.5 months.

Results

Out of 122 patients, 34 (27.9%) patients had an initial full-thickness tear and 88 (72.1%) patients had a partial-thickness tear. Considering all patients together, tear size increased in 51/122 (41.8%) patients, was unchanged in 65/122 (53.3%) patients, and decreased in 6/122 (4.9%) patients. Tear size increased for 28/34 (82.4%) patients with full-thickness tears and 23/88 (26.1%) patients with partial-thickness tears. From the two groups which were followed over 12 months, a higher rate of enlargement was observed in full-thickness tears than in partial-thickness tears (6–12 months, n.s.; 12–24 months, P = 0.002; over 24 months, P < 0.001). Logistic regression revealed that having a full-thickness tear was the most reliable risk factor for tear progression (P < 0.001).

Conclusions

This study found that 28/34 (82.4%) of symptomatic full-thickness rotator cuff tears and 23/88 (26.1%) of symptomatic partial-thickness tears increased in size over a follow-up period of 6–100 months. Full-thickness tears showed a higher rate of enlargement than partial-thickness tears regardless of the follow-up duration. Univariate and multivariate analyses suggested that full-thickness tear was the most reliable risk factor for tear enlargement. The clinical relevance of these observations is that full-thickness rotator cuff tears treated conservatively should be monitored more carefully for progression than partial-thickness tears.

Level of evidence

IV.

     

Efficacy of ultrasonography-guided shoulder MR arthrography using a posterior approach

Aim  

Shoulder MR arthrography has an important role in the assessment of rotator cuff lesions, labral tears, glenohumeral ligaments, rotator interval lesions, and postoperative shoulder status. Injection in direct MR arthrography can be performed with palpation, fluoroscopy, ultrasonography (US), or MRI. Recently, the posterior approach is the preferred method due to the presence of fewer stabilizers, absence of important articular structures and less extravasation, has been advocated. Our aim was to assess the efficacy of US-guided MR arthrography via a posterior approach on the glenohumeral joint.     

Repair of partial tears of the rotator cuff

Partial-thickness rotator cuff tears present partial disruption of tendon fibers with no communication between the subacromial bursa and the glenohumeral joint. The clinical presentation is surprisingly variable, ranging from mild discomfort to decreased throwing speed, chronic pain, and shoulder inability. The first approach to partial-thickness rotator cuff tears is usually conservative, but the hypovascularity of the critical zone and mechanical factors often result in poor spontaneous tendon healing. Surgical options include arthroscopic cuff "debridement" or "repair," performed arthroscopically or by open surgery, and subacromial decompression or debridement if necessary. No agreement has been reached on the best surgical management. However, repair is usually indicated if bursal-sided and articular tears involve more than 50% of tendon thickness; debridement is generally undertaken if <50% of the rotator cuff is torn. There is a need for randomized clinical trails formulating and testing guidelines of management and for further studies on imaging or intraoperative measures and methods to assess the thickness of the rotator cuff to inform management.     

Direct MR arthrography of the shoulder: is exercise prior to imaging beneficial or detrimental?

PURPOSE: To define the beneficial and detrimental effects of adding exercise to direct magnetic resonance (MR) shoulder arthrography. MATERIALS AND METHODS: Direct, intraarticular, gadolinium arthrography of the shoulder was performed in 41 patients, who underwent 1.5-T MR imaging before and after 1 minute of arm swinging. Fourteen milliliters of dilute gadolinium solution was injected. Two readers blinded to exercise independently graded the randomly distributed images with a five-point scale for capsular contrast material resorption; extraarticular contrast material leakage; rotator cuff, glenoid labrum, and anterior capsule conspicuity; and partial-thickness or full-thickness rotator cuff tear and labral tear detectability. The sign test was performed to evaluate the significance of differences between preexercise and postexercise grading for each reader. A second review was performed, with direct side-by-side comparison of preexercise and postexercise images. RESULTS: There was evidence of increased capsular resorption after exercise but no alteration in the depiction of the rotator cuff tendons or glenoid labrum. There was no significant extraarticular contrast material leakage after exercise and no alteration in depiction of the anterior capsule. There was no difference in the detectability of rotator cuff or labral tears. CONCLUSION: Exercise with direct shoulder MR arthrography has no beneficial or detrimental effect on image quality or on the depiction of rotator cuff or labral tears.     

Horizontal component of partial-thickness tears of rotator cuff: imaging characteristics and comparison of ABER view with oblique coronal view at MR arthrography initial results

PURPOSE: To determine the characteristics of horizontal components of partial-thickness tears of the rotator cuff at magnetic resonance (MR) arthrography and to determine whether use of the abduction and external rotation (ABER) position improved detection of a horizontal component in partial-thickness tears. MATERIALS AND METHODS: MR studies in 16 patients (mean age, 32 years) who had partial-thickness tear with a horizontal component were retrospectively evaluated. All 16 patients had undergone arthroscopic surgery. The depth and extent of the horizontal component were measured on MR images, and the presence or absence of articular surface tear was recorded. The characteristics of the horizontal component on ABER views were compared with those on oblique coronal views. RESULTS: A horizontal component (24 lesions; one tendon involved in eight patients and two tendons involved in eight patients) was observed in 100% of the lesions on ABER views and in 21% of the lesions (n = 5) on oblique coronal images. The mean length of the horizontal components, measured on ABER views, was 1.9 cm (range, 0.6-4.5 cm). Thirteen (54%) of the 24 lesions were classified as grade I (<3 mm) in depth, four (17%) were classified as grade II (3-6 mm), and seven (29%) were classified as grade III (>6 mm). Articular separation sites with a flap lesion were visualized in 15 (62%) of 24 lesions on ABER views. CONCLUSION: MR arthrography of the shoulder with patients in the ABER position may provide additional information in cases of partial-thickness tears of the rotator cuff with a horizontal component.