Effects of chitosan oligosaccharides on the femur trabecular structure in ovariectomized rats

Objectives Drugs used to treat osteoporosis are taken long-term and ideally have no adverse effects. Recent interest has focused on chitosan oligosaccharides as a bone-inducing substance for use as bone graft material. The present study was designed to investigate the effects of chitosan oligosaccharides on the femur trabecular structure in ovariectomized rats by three-dimensional imaging analysis using micro-computed tomography (CT).Methods Female 12-week-old Wistar rats were divided into three groups, which underwent ovariectomy (two groups) or sham surgery (one group). After 12 weeks, rats of one of the ovariectomized groups began treatment with chitosan oligosaccharides (500 mg/kg bodyweight) three times per week for 8 weeks. Then, the femurs of all rats were resected for bone analysis by micro-CT, and three-dimensional images of the femur were reconstructed from the axial CT images to evaluate the following parameters: bone volume/tissue volume (BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), trabecular separation (Tb.sp), trabecular bone pattern factor (TBPf), structure model index (SMI), number of nodes per unit tissue volume, number of termini per unit tissue volume, and the total strut length per unit tissue volume.Results The BV/TV, Tb.Th, and Tb.N were significantly higher in the ovariectomized and treated (OVX + C) group versus the ovariectomized, untreated (OVX) group. Tb.Sp, TBPf, and SMI were significantly lower in the OVX + C group versus the OVX group.Conclusions Our findings demonstrate that chitosan oligosaccharides prevent decreases in bone volume, trabecular number, trabecular thickness, and trabecular connectivity in the femurs of ovariectomized rats.     

不同方式处理犬下颌磨牙区即刻种植间隙的效果评价

目的: 探讨在犬下颌磨牙区即刻种植中,不同方式处理拔牙窝与种植体之间的间隙后的新骨形成情况。方法: 选择 6 条 1.5~2.0 岁的拉布拉多犬作为实验对象,在每条犬下颌骨中拔除两侧的第四前磨牙和第一磨牙,分别植入 4 颗牙种植体（Astra Tech^®,4.0 mm × 10 mm）。种植体和拔牙窝骨壁之间的近远中间隙分别进行3种处理,分为空白组（NN组）、胶质银明胶海绵（Gelatamp） 组（EN组）和 Gelatamp + 可吸收胶原膜（CM）组（EG 组）。术后12周收集标本,进行显微CT 扫描和组织学分析。采用SPSS 25.0软件包进行统计学分析。结果: 牙种植术后 12 周存活率为 100%。显微CT 扫描结果显示,新骨高度、骨矿物质密度（BMD）、骨体积分数 （BV/TV）、骨表面积骨体积比（BS/TV）、骨小梁厚度（Tb.Th）、骨小梁数（Tb.N）和骨小梁间距（Tb.Sp）等指标,组间无显著差异。组织学分析结果显示,新骨形成面积和种植体与骨接触面积（BIC）在组间无统计学差异。结论: 使用不同方式处理种植体与拔牙窝之间的间隙后的12周内,与空白对照组相比,单独放置 Gelatamp 或与 CM 联合使用,对种植体周围新骨形成、BIC、BMD、BV/TV、BS/TV、Tb.Th、Tb.N 及 Tb.Sp 等均无显著影响。     

Bone turnover markers in serum and periodontal microenvironments

BACKGROUND: Periodontitis is characterized by altered bone turnover, but local measurements are difficult. OBJECTIVES: The objective of this study was to develop a method to measure multiple markers of bone turnover from single samples collected at various bone surfaces of the periodontium, and to test the ratios of these markers against more traditional serum and gingival crevicular fluid (GCF) samples. MATERIALS AND METHODS: Fourteen subjects with untreated periodontitis were recruited for sampling serum, GCF (from sites > or = 5 mm probing depth that bled on probing) and washes of periodontal bone surfaces (adjacent interproximal, vestibular cortical and trabecular bone) with a novel irrigating device. All samples were analyzed for osteocalcin (OC, bone turnover marker; RIA), cross-linked N-telopeptide of type I collagen (NTx, bone resorption marker; ELISA) and albumin (Alb, serum protein; ELISA). Results were reported as ratios: OC/NTx to determine relative bone turnover, and OC/Alb or NTx/Alb to determine local OC or NTx production. RESULTS: The OC/NTx ratio was significantly higher (p < or = 0.05) in serum vs. GCF (OC undetectable), interproximal bone and cortical vestibular bone, but significantly lower than in trabecular vestibular bone. The OC/Alb ratio for serum was also statistically lower than for vestibular trabecular bone. The NTx/Alb ratio for serum was statistically lower than for GCF and all the bone wash test sites. The results indicated considerable local production of both OC and NTx. CONCLUSIONS: This system demonstrated that multiple markers of bone turnover can be harvested by irrigation from periodontal bone microenvironments. Bone turnover profiles from periodontal bone surfaces and GCF differed from systemic bone turnover profiles (serum) and may be valuable in tracking site-specific responses to disease or treatment.     

Microcomputed tomography analysis of particular autogenous bone graft in sinus augmentation at 5 months: differences on bone mineral density and 3D trabecular structure

Objectives

This study investigated the effects of gender on the three-dimensional (3D) bone mineral density (BMD) and micromorphology of the trabeculae of matured autogenous bone grafts after sinus floor augmentation, and compared them to those of adjacent native bone.

Materials and methods

Ten bone biopsy samples were removed from the implant placement areas of patients who had received second-stage sinus floor augmentation, and analyzed by microcomputed tomography. BMD phantoms with two calcium hydroxyapatite densities (0.25 and 0.75 g/cm³) were used to determine the BMD of the grafted and native bone samples. The 3D structural parameters of the trabeculae, including percentage of bone volume (bone volume/tissue volume, BV/TV), trabecular thickness (Tb.Th), trabecular number, trabecular separation, trabecular pattern factor (Tb.Pf), and structure model index, were analyzed between males and females and between grafted bone and native bone.

Results

No significant gender-specific differences in BMD and 3D trabecular structure of either native or grafted bone were found (P?>?0.05). Compared to the adjacent native bone, the autogenous grafted bone exhibited lower BV/TV and Tb.Th as well as a higher Tb.Pf (P?<?0.05). Additionally, there was a weak positive correlation between the Tb.Th values of grafted and native bone (R ²?=?0.58).

Conclusions

In the maxillary sinus, autogenous grafted bone exhibited lower BV/TV, Tb.Th, and trabecular connectivity than the adjacent native bone. No significant gender-specific differences were found for either the BMD or 3D trabecular structure of grafted bone.

Clinical relevance

After bone remodeling, autogenous grafted bone revealed different 3D trabecular structure as compared to native bone.     

Bone microarchitecture and turnover in the irradiated human mandible

ObjectivesThe aim of this study was to assess the microarchitecture and turnover in irradiated cancellous mandibular bone and the relation with radiation dose, to elucidate the effects of radiotherapy on the mandible.Patients and methodsMandibular cancellous bone biopsies were taken from irradiated patients and controls. Micro-CT scanning was performed to analyze microstructural bone parameters. Bone turnover was assessed by histomorphometry. Local radiation dose at the biopsy site (Dmax) was estimated from radiotherapy plans.ResultsTwenty-seven irradiated patients and 35 controls were included. Osteoid volume (Osteoid Volume/Bone Volume, OV/BV) [0.066/0.168 (median/interquartile range (IQR), OV/BV; %), P < 0.001], osteoid surface (Osteoid Surface/Bone Surface, OS/BS) [0.772/2.17 (median/IQR, OS/BS; %), P < 0.001] and osteoclasts number (Osteoclasts per millimetre bone surface, Ocl/mmBS; mm²) [0.026/0.123 (median/IQR, Ocl/mmBS; mm²), P < 0.001] were decreased; trabecular number (Tb.N) was lower [1.63/0.63 (median/IQR, Tb.N; 1/mm⁻¹), P = 0.012] and trabecular separation (Tb.Sp) [0.626/0.24 (median/IQR, Tb.Sp; μm), P = 0.038] was higher in irradiated mandibular bone. With higher Dmax, trabecular number increases (Spearman's correlation R = 0.470, P = 0.018) and trabecular separation decreases (Spearman's correlation R = −0.526, P = 0.007). Bone mineral density (BMD, milligrams hydroxyappetite per cubic centimetre, mgHA/cm³) [1016/99 (median/IQR, BMD; mgHA/cm³), P = 0.03] and trabecular separation [0.739/0.21 (median/IQR, Tb.Sp; μm), P = 0.005] are higher whereas connectivity density (Conn Dens) [3.94/6.71 (median/IQR, Conn Dens), P = 0.047] and trabecular number [1.48/0.44 (median/IQR, Tb.N; 1/mm⁻¹), P = 0.002] are lower in Dmax ≤50 Gy compared to controls.ConclusionsRadiotherapy dramatically impairs bone turnover in the mandible. Deterioration in microarchitecture only affects bone irradiated with a Dmax of <50 Gy. The 50 Gy value seems to be a critical threshold to where the effects of the radiation is more detrimental.     

Microcomputed tomographic analysis of bone microarchitecture after sinus augmentation with hyaluronic matrix: a case–control study

Background

The aim of this study was to analyze trabecular microarchitecture of augmented sinuses with hyaluronic matrix and xenograft by microcomputed tomography, and to investigate whether hyaluronic matrix has an effect on the newly formed bone quality.

Materials and methods

Thirteen patients undergoing maxillary sinus augmentation were included in this split-mouth study. Right and left sinus sites were randomly assigned to test and control group. In test group, the sinus was grafted with hyaluronic matrix and xenograft; in control group, only with xenograft. Four months after augmentation, bone samples were harvested during implant placement and analyzed for the following trabecular microarchitecture parameters using microcomputed tomography: bone volume (BV), total volume (TV), bone volume fraction (BV/TV), bone surface (BS), specific bone surface (BS/BV), bone surface density (BS/TV), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), trabecular pattern factor (Tb.Pf), and fractal dimension (FD).

Results

There was statistically significant difference only for BS/TV parameter between two groups. BS/TV was higher in hyaluronic matrix group compared with control group.

Conclusions

Addition of hyaluronic matrix to xenograft may enhance bone quality in terms of bone surface density. However, more research investigating the microstructural variation of augmented sinuses is needed with a greater sample.

     

Local biochemical markers of bone turnover: relationship to subsequent density of healing alveolar bone defects

OBJECTIVES: This pilot study was designed to test whether biochemical markers of bone turnover in washes of periosteal or trabecular alveolar bone surfaces could be correlated with increases in bone density of an adjacent healing implant socket. METHODS: Ten subjects had a canula inserted into the alveolar crest and sterile phosphate-buffered saline was washed over the periosteal and trabecular surfaces and collected. Surgical flaps were reflected, 5 mm diameter bone cores were removed from the bone wash site, and standardized radiographs were taken. The sites were allowed to heal for 12 weeks, and radiographs were repeated. Bone washes of the healing sites were also collected after 2 and 12 weeks. Washes were analysed for bone turnover markers osteocalcin (OC; radioimmunoassay) and C-terminal telopeptide of Type 1 collagen (ICTP; enzyme-linked immunosorbent assay (ELISA)), and blood component albumin (ALB; ELISA). Changes in bone density during healing were determined by radiographic absorptiometry. RESULTS: OC/ALB and ICTP/ALB ratios were higher for trabecular than periosteal washes at baseline (p相似文献   

Relationships between bone strength and bone quality: three-dimensional imaging analysis in ovariectomized mice

Objectives Low-energy trauma resulting in fractures of the distal femur is often observed in elderly patients with osteoporosis; such fractures are often associated with treatment difficulties and poor prognosis. The purpose of this study was to clarify the factors that affect the bone strength of the distal femur.Methods We used ovariectomized mice to demonstrate bone quality factors associated with deterioration of the strength of the distal femur. Ten-week old ICR-strain mice were ovariectomized or sham-ovariectomized. Total bone mineral density (BMD), total bone area, cortical BMD, cortical thickness, and trabecular BMD were measured by peripheral quantitative computed tomography in the distal metaphyseal region of the femora. As three-dimensional architectural parameters, the trabecular number, trabecular thickness (Tb.Th), trabecular separation, and connectivity density were measured in the same region by microcomputed tomography. The maximum load measured by compression testing of the distal metaphyseal region was regarded as the bone strength of each sample.Results No significant differences in total bone area or in cortical BMD were found between the groups. Bone strength showed the closest relationship with total BMD (r = 0.834). Multiple regression analysis demonstrated that total BMD greatly depended on cortical thickness. The addition of Tb.Th to trabecular BMD markedly reflected bone strength (R = 0.857), suggesting that Tb.Th affected bone strength more significantly than trabecular BMD.Conclusions These findings suggested that deterioration of bone strength of the distal femur (metaphysis) was not caused by a reduction in cortical BMD, but was related to reduced cortical thickness, which reduced total BMD, and to trabecular BMD and architecture, in particular to reduced Tb.Th.     

The correlation of different methods for the assessment of bone quality in vivo: an observational study

Different methods for the assessment of bone quality were evaluated in this study. Sixty alveolar bone areas were investigated. Peri-apical and panoramic radiographs were obtained with an aluminium scale to assess optical density. The Lekholm and Zarb (L&Z) classification was determined through radiographic analysis and the surgeon’s tactile perception. A trephine was used to obtain a bone biopsy for assessment by micro-computed tomography (micro-CT) and histomorphometry. Primary stability of the implants was assessed using insertion torque (IT) and the implant stability quotient (ISQ). The optical density on peri-apical radiographs was correlated with IT, ISQ, and micro-CT (BV, BV/BT, Tb.Th, Tb.N, BS/BV, Tb.Pf, and SMI) (rho ≤ 0.471, P ≤ 0.028). Panoramic radiography showed a correlation only with bone surface (BS) and bone surface/volume ratio (BS/TV) (rho ≤ 0.290, P ≤ 0.031). IT showed a correlation with ISQ, histometry, and micro-CT (BV, BS/TV, Tb.Th, Tb.N, BS/BV, Tb.Pf, Tb.Sp, BV/BT) (rho ≤ 0.550, P ≤ 0.022). ISQ did not show any correlation with micro-CT. The L&Z classification showed correlations with the optical density obtained in the peri-apical radiographs, histometry, osteocyte count, IT, and micro-CT (BS/BV, Tb.Sp, Tb.Pf, BV, BS/TV, Tb.Th, Tb.N) (rho ≤ 0.344, P ≤ 0.042). The L&Z bone classification and IT are reliable methods, peri-apical radiographs and ISQ are acceptable, and panoramic radiography is not a reliable method for the assessment of bone quality.     

Assessment of aging characteristics of female condylar trabecular structure by cone-beam computed tomography

Objectives

This study was performed to analyze the aging-related changes of the female condylar bone mineral density (BMD) and trabecular structure by cone-beam computed tomography (CBCT), and determine whether the condylar structure shows obvious changes after menopause.

Methods

The CBCT images of 160 female patients who met the inclusion criteria for the study were collected and divided into four groups by age (20–29 years, 30–39 years, premenopausal, and postmenopausal groups). Computer processing software CT-Analyser (Version 1.15.2.2+; SkyScan, Antwerp, Belgium) was used to measure the condylar BMD and related indexes, namely the bone volume/tissue volume ratio (BV/TV), trabecular number (Tb.N), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), trabecular structure model index (SMI), and bone surface area/volume ratio (BS/BV). SPSS 12.0 (SPSS Inc., Chicago, IL, USA) was used to analyze the radiographic findings and statistical differences.

Results

No significant differences were found between the bilateral condyles in each group (P?>?0.05). BV/TV, Tb.N, and Tb.Th of the condyle decreased with age, and the postmenopausal group showed significantly different values for each index compared with the other groups (P?<?0.01). Tb.Sp, SMI, and BS/BV of the condyle increased with age, and the postmenopausal group showed significantly different values for each index compared with the other groups (P?<?0.01).

Conclusions

With increasing age, the female condylar bone volume decreases, the Tb.N and Tb.Th decrease, the gap between the trabecular bone increases, and plate-like trabecular bone gradually transforms into a rod-like form. These changes are much more obvious in postmenopausal women.

     

Evaluating two-dimensional skeletal structure parameters using radiological bone morphometric analysis

Objectives To investigate the reliability of two-dimensional (2D) skeletal structure parameters obtained using radiological bone morphometric analysis.Methods The 2D skeletal parameters in the regions of interest (ROIs) were measured on computed radiography (CR) images of first phalanges from racehorses, using radiological bone morphometric analysis. Cancellous bone blocks were made from the phalanges in the same position as the ROI determined on CR images. Three-dimensional (3D) trabecular parameters were measured using microcomputed tomography (µCT). The correlations between the 2D skeletal parameters and 3D trabecular parameters were evaluated in relation to the measured bone strength.Results The following 2D skeletal structure parameters were correlated with bone strength (r = 0.61 − 0.69): skeletal perimeter (Sk.Pm), skeletal number (Sk.N), skeletal separation (Sk.Sp), skeletal spacing (Sk.Spac), fractal dimension (FD), and skeletal pattern factor (SkPf). The 3D trabecular structure parameters were closely correlated with bone strength (r = 0.74 − 0.86). The 2D skeletal parameters Sk.N, Sk.Pm, FD, SkPf, and Sk.Spac were correlated with the 3D trabecular parameters (r = 0.61 − 0.70).Conclusions The 2D skeletal parameters obtained using radiological bone morphometric analysis may be useful indicators of trabecular strength.     

The Influence of Bone Type on the Gene Expression in Normal Bone and at the Bone‐Implant Interface: Experiments in Animal Model

Background: Studies on the biological processes in different bone types and the reaction of different bone types to biomaterials are often hindered because of the difficulties in sampling procedures and lack of sensitive techniques. Purpose: The purpose was to assess the suitability of quantitative polymerase chain reaction (qPCR) for investigation of the biological differences between cortical and trabecular bone types and their responses to biomaterials. Materials and Methods: Gene expression of selected markers in rat bone samples from different locations was evaluated. Samples were harvested by trephines from the trabecular femoral epiphysis, cortico‐trabecular proximal tibial metaphysic, and the cortical distal tibial metaphysis. Gene expression was also evaluated at the surfaces of anodically oxidized implants retrieved from cortical and trabecular sites after 3 days of implantation. mRNA in the bone samples and in the tissue associated with the implant surfaces was extracted and quantified using qPCR. Tumor necrosis factor‐α (TNF‐α), interleukin‐1β (IL‐1β), alkaline phosphatase (ALP), osteocalcin (OC), tartrate‐resistant acid phosphatase (TRAP), cathepsin K (CATK), and 18S ribosomal subunits (18S) were analyzed. Results: In the bone samples, higher expression of ALP, OC, TRAP, and CATK was found in femoral epiphysis compared to proximal or distal tibial metaphysis, indicating a higher turnover in the trabecular bone. On the other hand, TNF‐α and IL‐1β showed higher expression in both tibia sites compared with the femur site, which suggests higher inflammatory potential in the cortical bone. In response to the oxidized implants trabecular bone expressed a higher level of IL‐1β, whereas the implants in cortical bone were associated with higher expression of ALP and OC. Conclusion: There are biological differences between cortical and trabecular bone types, both in the normal steady‐state condition and in response to biomaterials. Such differences can be characterized and discriminated quantitatively using a sensitive technique such as qPCR.     

A Longitudinal Study of the Effect of Experimental Osteoporosis on Bone Trabecular Structure in the Rat Mandibular Condyle

Abstract

The authors performed a longitudinal study of the microstructural changes occurring in the mandibular condyle during osteoporosis using the findings obtained from micro-CT. The subjects used in this study were eight Sprague-Dawley rats. Among them, five were administered the immunosuppressant drug FK506 by injection for five weeks, while the other three were administered saline solution in the same manner. Micro-CT images were taken of the bilateral mandibular condyle, hip, and knee joints in all animals on days 1, 8, 15, 22, 29, and 36 following injection. Six indices of morphometric analysis were compared between the two groups. Significant differences were observed in BV/TV, Tb.Th, Tb.N, and Tb.Sp in the mandibular condyle, while trabecular bone density appeared to decrease in the immunosuppressant group on three-dimensional (3D) imaging. And, in comparison with the mandibular condyle and femur, they were similar. These results suggested that osteoporosis affects not only the femur, but also the mandibular condyle.     

Application of the Digital Radiographic Bone Trabecular Structure Analysis to the Mandible using Morphological Filter

[Purpose] To develop a digital radiographic bone trabecular structure analyzing system and to applied it to mandible. [Methods] Structural change was simulated by removing spongy bone in human dried mandible. Using a morphological filter processing, the skeletal features were extracted from digital radiographic image data obtained by computed radiography before and after the removal of spongy bone. The skeletal volume, surface, thickness, number, separation, complexity, spacing continuity and connectivity on the skeletal binary images were determined by morphometric indices calculation, star volume analysis and node-strut analysis. Using these quantified skeletal feature parameters, a mapping sheet for the structural evaluation was produced. The correlation between the fluctuation rate of each parameter after the removal of spongy bone with respect to the value before the removal of spongy bone and simulated structural change was examined. [Results] The skeletal binary image data quantified sixteen skeletal feature parameters using morphometric indices calculation, star volume analysis and node-strut analysis. These parameters agreed with the theoretical fluctuation pattern in the simulated skeletal structure deterioration of the mandibular bone trabeculae.[Conclusion] Using a morphological filter and bone histomorphometry, the radiological bonemorphometric analyzing system is useful for the evaluation of the mandibular trabecular structure.     

The effect of bone morphometric changes on orthodontic tooth movement in an osteoporotic animal model

Objective:To elucidate the effect of bone morphometric changes on orthodontic tooth movement (OTM) in zoledronic acid–treated ovariectomized rats.Materials and Methods:Twenty-one 10-week-old female Wistar rats were divided into ovariectomy (OVX), OVX with zoledronic acid administration (OVX + ZOL), and sham operation (control) groups. Two weeks after OVX, ZOL administration was initiated. Twelve weeks after OVX, a nickel-titanium closed-coil spring of 25-g force was applied mesially to the maxillary left first molar. In vivo micro–computed tomography (CT) of the left proximal tibia was performed for bone morphometric analysis every 2 weeks after OVX. In addition, OTM was investigated using micro-CT at 0, 12, and 14 weeks after OVX.Results:There were significant differences in the bone mineral content (BMC), bone volume (BV), BMC to tissue volume ratio (BMC/TV), and BV to TV ratio of trabecular bone between the control and OVX groups and also between the OVX + ZOL and OVX groups. In the OVX + ZOL group, increased BMC and BV in the cortical bone and increased bone mineral density (BMD) in the trabecular bone were observed. Interestingly, OTM in the OVX group was almost two times more than that in the control and OVX + ZOL groups. Moreover, OTM was correlated with BMD, BMC, BV, and BMC/TV in the trabecular bone.Conclusions:OVX accelerated OTM, while ZOL suppressed it. OTM demonstrated a significant negative relationship with trabecular bone mass.     

大鼠同种异体骨髓间充质干细胞联合Bio-Oss骨粉-bFGF复合物促进拔牙窝愈合的micro-CT研究

目的:观察以Bio-Oss骨粉bFGF支架联合大鼠骨髓间充质干细胞(BMSCs)植入大鼠拔牙窝后在牙槽窝愈合过程中对牙槽骨微结构的影响.方法:取3周龄SD大鼠股骨全骨髓,自然贴壁分离BMSCs.选取36只6周龄SD大鼠,拔除上颌后牙,立即植入不同材料.按植入材料分为4组,即复合物组植入BMSCs联合Bio-Oss骨粉b...     

Early bony changes associated with bisphosphonate-related osteonecrosis of the jaws in rats: A longitudinal in vivo study

ObjectiveTo evaluate early bony changes in an animal model of Medication-Related Osteonecrosis of the Jaw (MRONJ) at the side of the local trauma and at the contralateral side, comparing with a control group. Bony changes were evaluated by Microcomputed Tomography (MicroCT) at three times points: at baseline (T0), after drug administration (T1) and after dental extraction (T2).DesignTwo groups were compared: the experimental group in which zoledronic acid (ZA) was administered (17 rats) and the control group (13 rats). Dental extractions of the lower left first molars were performed in all animals. The left side was considered as the supposed affected area in the ZA group, and the right side was considered as the unaffected area. In these areas, the following structural microtomographic bone parameters were calculated: Bone Mineral Density (BMD), Trabecular Thickness (Tb.Th), and Bone Volume Proportion (BV/TV). The comparison of quantitative bone parameters among the different sides and experimental phases of both studied groups were performed by ANOVA-factorial.ResultsNone of the animals of the control group developed MRONJ. In the ZA group, 76% presented bone exposure. From T0 to T1, Tb.Th and BV/TV increased, and in T2, the mean values were higher in ZA group than in the control group. BMD increased throughout the different phases of both groups.ConclusionsStructural bony changes occurred in the ZA group at both mandibular sides before the dental extraction (T1). Tb.Th and BV/TV should be further investigated as potential early bone markers of MRONJ.     

Radiological Morphometric Analysis for the Trabecular Bone Structure of Mandibular Condyle after Ovariectomy in Mature Cynomolgus Monkeys

To investigate the effects of experimental osteoporosis on the trabecular structure of the mandibular condyle in cynomolgus monkeys by radiological bone morphometry ovariectomy (OVX) was performed on 10-year-old female cynomolgus monkeys which were fed a controlled diet for 2 years. Ten sham control groups were fed under the same conditions. Using a microfocus tube and computed radiography the removed mandibular condyle samples were imaged by standardized magnification radiography. The structural parameters were measured using radiological bone morphometric analysis. The bone mineral density (BMD) was measured by dual energy X-ray absorptiometry. The thickness of the cortical bone was measured using magnified radiographic images. The thickness of the cortical bone and the BMD in the OVX group were significantly lower than in the sham group. In the results of skeletal structure of the mandibular condyle the trabecular structure of the mandibular condyle was markedly deteriorated in the OVX group. The trabecular structure of the mandibular condyle for the OVX group was significantly decreased thus it was suggested that osteoporosis is a potential risk factor of osteoarthritis of the temporomandibular joint.     

Chronological changes in the microstructure of bone during peri-implant healing: a microcomputed tomographic evaluation

Our objectives were to examine the titanium-bone interfaces chronologically and to clarify the process of osseointegration using microcomputed tomography (microCT). The mandibular premolars of 3 dogs were extracted and 12 weeks later 2 Straumann dental implants were installed in each quadrant. The microstructural changes at the bone-implant interface at the first, fourth, and eighth weeks after installation were evaluated by microCT and a 3-dimensional image was constructed. The microstructural measurements at the bone-implant interface, including the trabecular number (Tb.N), bone volume fraction (BV/TV), structure model index (SMI), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp) and connectivity density (Conn.D), were measured. Experimental outcomes were analysed for correlations between time and microstructural variables of trabecular bone. Tb.N increased significantly during the eighth week compared with that during the first and fourth week (p = 0.001, 0.002). BV/TV increased generally with time and there were significant differences (p = 0.003) between each time group. While Tb.Sp decreased with time and changed significantly during the eighth week compared with that during the first week (p = 0.021), differences in SMI, Tb.Th and Conn.D did not differ significantly according to time of implant. The significant increase in the Tb.N and BV/TV during the eighth week after insertion of implants indicates that the formation of new bone before the eighth week is the key to osseointegration.     

Relationship between bone mineral density and 2D and 3D structural parameters of bone trabeculae

Objectives We analyzed the two- (2D) and three-dimensional (3D) structure of trabecular bone using bone mineral density (BMD) values as the standard. Correlations between the 2D and 3D structural parameters and BMD in the same samples of trabecular bone were determined to assess the reliability of 2D radiological morphometric analysis of bone as a method for evaluating BMD. Methods The first phalanxes of racehorses were used. A region of interest (ROI) was specified on computed radiography images of the phalanx. The 2D structural parameters for the ROI were determined by morphometric analysis. Then, a block of trabecular bone corresponding to the ROI was excised from the phalanx, and the 3D structural parameters of this bone sample were determined using microfocus X-ray computed tomography. The BMD of each bone sample was measured using peripheral quantitative computed tomography. Results Most, but not all, of the 3D parameters were correlated with BMD (r = 0.82–0.98), and several 2D parameters (skeletal perimeter, skeletal number, skeletal separation, skeletal spacing, fractal dimension, and skeletal pattern factor) were relatively closely correlated with BMD (r = 0.57–0.65). Conclusions These results suggest that the 2D morphometric analysis of bone is a useful, noninvasive method for assessing bone strength.