The use of cementless expansion acetabular component and an alumina-polyethylene bearing in total hip arthroplasty for osteonecrosis

We performed 114 consecutive primary total hip arthroplasties with a cementless expansion acetabular component in 101 patients for advanced osteonecrosis of the femoral head. The mean age of the patients at surgery was 51 years (36 to 62) and the mean length of follow-up was 110 months (84 to 129). The mean pre-operative Harris hip score of 47 points improved to 93 points at final follow-up. The polyethylene liner was exchanged in two hips during this period and one broken acetabular component was revised. The mean linear wear rate of polyethylene was 0.07 mm/year and peri-acetabular osteolysis was seen in two hips (1.9%). Kaplan-Meier analysis indicated that the survival of the acetabular component without revision was 97.8% (95% confidence interval 0.956 to 1.000) at ten years. Our study has shown that the results of THA with a cementless expansion acetabular component and an alumina-polyethylene bearing surface are good.     

Second-generation cementless total hip arthroplasty. Eight to eleven-year results.

BACKGROUND: Second-generation cementless femoral components were designed to provide more reliable ingrowth and to limit distal osteolysis by incorporating circumferential proximal ingrowth surfaces. We examined the eight to eleven-year results of total hip arthroplasty with a cementless, anatomically designed femoral component and a cementless hemispheric acetabular component. METHODS: Ninety-two consecutive primary total hip arthroplasties with implantation of a femoral component with a circumferential proximal porous coating (Anatomic Hip) and a cementless hemispheric porous-coated acetabular component (Harris-Galante II) were performed in eighty-five patients. These patients were prospectively followed clinically and radiographically. Six patients (seven hips) died and five patients (seven hips) were lost to follow-up, leaving seventy-four patients (seventy-eight hips) who had been followed for a mean of ten years (range, eight to eleven years). The mean age at the time of the arthroplasty was fifty-two years. RESULTS: The mean preoperative Harris hip score of 51 points improved to 94 points at the time of final follow-up; 86% of the hips had a good or excellent result. Thigh pain was reported as mild to severe after seven hip arthroplasties. No femoral component was revised for any reason, and none were loose radiographically at the time of the last follow-up. Two hips underwent acetabular revision (one because of dislocation and one because of loosening). Kaplan-Meier survivorship analysis was performed with revision or loosening of any component as the end point. The ten-year survival rate was 96.4% +/- 2.1% for the total hip prosthesis, 100% for the femoral component, and 96.4% +/- 2.1% for the acetabular component. Radiolucencies adjacent to the nonporous portion of the femoral component were seen in sixty-eight (93%) of the -seventy-three hips with complete radiographic follow-up. Femoral osteolysis proximal to the lesser trochanter was noted in four hips (5%). No osteolysis was identified distal to the lesser trochanter. Periacetabular osteolysis was identified in twelve hips (16%). Five patients underwent exchange of the acetabular liner because of polyethylene wear. CONCLUSIONS: This second-generation cementless, anatomically designed femoral component provided excellent clinical and radiographic results with a 100% survival rate at ten years. The circumferential porous coating of this implant improved ingrowth and prevented distal osteolysis at a mean of ten years after the arthroplasty.     

H/G非骨水泥人工全髋关节置换术后聚乙烯内杯磨损临床研究

目的 对H/G非骨水泥人工全髋关节置换术后聚乙烯内杯的磨损及髋臼周围骨溶解的情况进行总结.方法 我院1991至1995年共进行58例(65髋)H/G非骨水泥人工全髋关节置换,其中35例(40髋)获得10年以上随访.对这35例(40髋)患者获得随访的病例,采用计算机数字化方法测量髋臼聚乙烯内杯的二维线性磨损.结果 35例40髋均有不同程度的磨损,磨损范围2～8 mm,平均磨损为(0.32±0.31)mm/年.10髋聚乙烯磨损超过6 mm,髋臼假体周围的骨溶解严重,并伴有金属假体的移位,其中5髋聚乙烯内杯完伞磨透,金属股骨头与金属髋臼相接触;5髋聚乙烯内杯磨损严重伴明显骨溶解,内杯松动.2髋聚乙烯内杯脱位.共实施翻修手术12例,包括更换聚乙烯内杯和金属股骨头2例、金属闩杯翻修2例、全髋翻修8例.28髋在髋臼侧发现骨溶解,其中14髋股骨侧亦有骨溶解发生.结论 本组病例所观测到的H/G髋臼聚乙烯内杯的磨损程度超过文献所报道,而且由于磨损产生的大量磨屑,导致假体周围出现明显骨溶解,直接影响到假体的稳定.关节置换术后应定期随访,避免出现严重骨溶解后增加翻修手术的困难.     

Uncemented Harris-Galante total hip arthroplasty in patients with osteonecrosis of the femoral head. A 10-16-year follow-up study

Background There have only been a few reports regarding the long-term results of uncemented THAs in patients with osteonecrosis.

Patients and methods We evaluated the long-term results of 65 consecutive uncemented total hip arthroplasties (Harris-Galante type I prostheses) in 54 men (59 hips) and 5 women (6 hips) with osteonecrosis of the femoral head. The mean age was 53 (33-64) years. The mean duration of follow-up was 12.5 (10-16) years.

Results 9 femoral stems and 3 acetabular metal shells were revised. 2 polyethylene liners were changed due to excessive wear. A girdlestone procedure was done in 2 patients (2 hips) due to delayed deep infection. The mean polyethylene wear was 0.14 mm per year. 3 non-revised hips had pelvic osteolysis and 18 had femoral osteolysis. The 15-year survival rates, using failure defined as the removal of any component for any reason, were 85 (95% CI; 79-91)% for the acetabular and 80 (74-86)% for the femoral component and 70 (63-77)% for any of the components.

Intepretation The first generation of the HGP design was frequently associated with pain, unstable fixation, and osteolysis. Excessive wear was frequent. The cup showed better durability than the stem.     

Precoated femoral component in total hip arthroplasty. Results of 5- to 9-year followup.

One hundred nineteen consecutive primary hybrid total hip arthroplasties with a precoated femoral component were performed by one surgeon in 100 patients and followed up prospectively. Ninety-eight hips in 82 patients (mean age, 67 years) were evaluated clinically and radiographically at a mean of 6.5 years (range, 5-9 years). The hips were evaluated clinically using the Harris hip score, and radiographs were evaluated for femoral cement grade, loosening, and osteolysis. Ninety-five hips remained in place at the most recent followup. Two femoral components were revised for definite loosening, and one well fixed femoral component was removed because of late hematogenous infection. Excluding the three hips that were revised, the clinical result was excellent or good in 79 hips (83%), fair in 12 hips (13%), and poor in four hips (4%). All other femoral components were well fixed. There were defects of the cement mantles (C1 and C2) in 90 hips. No femoral component had a stem and cement radiolucent line. Focal femoral osteolysis was seen in only two hips. One acetabular component was removed at 5 years because of late hematogenous infection. One acetabular component had asymptomatic migration. The remaining 96 acetabular components were well fixed. Focal acetabular osteolysis was present in four hips. The mean linear polyethylene wear rate was 0.06 (+/- 0.05) mm per year. In contrast to other reports of early failure and osteolysis, the use of a precoated femoral component in this study did not adversely affect the fixation of hybrid total hip arthroplasty, with definite failure of only 2% (two of 98) of the femoral components.     

Similar Wear in Total Hip Arthroplasties with Metallic or Zirconia Femoral Heads

Ceramic femoral heads have been used in an attempt at reducing polyethylene wear of total hip arthroplasties. Clinical results with zirconia femoral heads have been mixed. This study was undertaken to compare the polyethylene wear and incidence of periprosthetic osteolysis in total hip replacements performed using a 28-mm zirconia versus a 28-mm cobalt chromium femoral head. Thirty-five hips with a 28-mm cobalt chromium head and 68 hips with a 28-mm zirconia head were evaluated after a minimum follow-up of 2 years (average, 4.0 years; range, 2.0 to 9.1 years). A monoblock acetabular component was used in all patients. Polyethylene wear was measured in serial radiographs from 58 of the hips utilizing a computer-assisted vector wear technique. Periacetabular osteolysis developed in three patients (two with a zirconia head and one with a cobalt chromium head). The total wear and the annual wear rate were 0.48 mm and 0.11 mm/year for the cobalt chromium heads and 0.53 mm and 0.14 mm/year for the zirconia heads, respectively. We found no benefit with respect to the rate of polyethylene wear or incidence of osteolysis with the use of zirconia femoral heads.     

Modular cementless total hip arthroplasty for multiple epiphyseal dysplasia

We analyzed a consecutive series of 23 total hip arthroplasties that had been performed using modular cementless prostheses in 13 patients with a confirmed diagnosis of multiple epiphyseal dysplasia and end-stage osteoarthritis of the hip. The average Harris hip score improved from 40.6 to 93.8 points. Postoperatively, all hips demonstrated favorable alterations in the biomechanical parameters including hip center of rotation, femoral offset, femoral neck length, and limb length. At a mean follow-up of 4.8 years, no hip required revision because of aseptic loosening of the acetabular or femoral component. One patient (1 hip, 4.3%) underwent reoperation for polyethylene wear and osteolysis 8 years after index arthroplasty. This study shows encouraging clinical and radiographic outcomes of modular cementless total hip arthroplasties for this technically difficult condition.     

Contemporary total hip arthroplasty with and without cement in patients with osteonecrosis of the femoral head

BACKGROUND: The rate of failure of primary total hip arthroplasty in patients with osteonecrosis of the femoral head is higher than that in patients with osteoarthritis. The purpose of this prospective study was to document the clinical and radiographic results of arthroplasty with so-called third-generation cementing and the results of second-generation cementless total hip arthroplasty in ninety-eight consecutive patients with osteonecrosis of the femoral head. METHODS: Fifty patients who had had simultaneous bilateral total hip arthroplasty with a cemented stem in one hip and a cementless stem in the other and forty-eight patients who had had a unilateral total hip arthroplasty with a cementless stem were included in the study. A cementless acetabular component was used in all hips. The presumed cause of the osteonecrosis was ethanol abuse in fifty-seven patients, unknown in twenty-seven, fracture of the femoral neck in nine, and steroid use in five. There were eighty men and eighteen women. The mean age at the time of the arthroplasty was 47.3 years (range, twenty-six to fifty-eight years). Clinical and radiographic evaluations were performed preoperatively; at six weeks; at three, six, and twelve months; and yearly thereafter. The average duration of follow-up was 9.3 years. RESULTS: The average Harris hip scores in the group treated with unilateral arthroplasty (97 points) and the group treated with bilateral arthroplasty (94 points) were similar at the time of final follow-up. They were also similar between the group treated with cement (mean, 96 points) and that treated without cement (95 points). No component had aseptic loosening in either group. In one hip, a cemented femoral stem (2%) and a cementless cup were revised because of infection. Two cementless stems (2%) were revised because of fracture of the proximal part of the femur with loosening of the stem. Annual wear of the polyethylene liner averaged 0.22 mm in the group treated with cement (a zirconia head) and 0.14 mm in the group treated without cement (a cobalt-chromium head). The prevalence of osteolysis in zones 1 and 7 of the femur was 16% in the group treated with cement and 24% in the group treated without cement. CONCLUSIONS: Advancements in surgical technique and better designs have greatly improved the long-term survival of cemented and cementless implants in young patients with osteonecrosis of the femoral head. Although there was no aseptic loosening of the components, a high rate of linear wear of the polyethylene liner and a high rate of osteolysis in these high-risk young patients remain challenging problems.     

Arthopor 2 acetabular component with screw fixation in primary hip arthroplasty: A 7- to 9-year follow-up study

The first 100 consecutive primary hip arthroplasties with the Arthopor 2 acetabular component (Joint Medical Products, Stamford, CT) with supplemental screw fixation performed by the senior author were prospectively studied. The mean patient age was 57 years. Seventy-seven cemented and 23 cementless stems were placed, with 32-mm femoral heads used in most of the patients. Eighty-six hips were reviewed at 7–8.8 years (mean, 7.8 years). The mean Harris hip score at final follow-up evaluation was 94 points. No cups have been revised, although 2 cups in patients with radiation osteonecrosis were loose radiographically. One patient underwent revision of a severely worn liner. Despite a relatively high mean linear wear rate of 0.27 mm/y (range, 0.13–0.57 mm/y), no radiographic evidence of pelvic osteolysis was seen. The Arthopor 2 cup performed well with respect to pelvic osteolysis, despite the presence of substantial polyethylene debris. The relatively high polyethylene wear rate is attributed in part to the younger patient population and the use of 32-mm femoral heads paired with thin polyethylene liners.     

The influence of technique on fixation of primary total hip arthroplasty in patients with rheumatoid arthritis

This is a prospective, consecutive study of 98 total hip arthroplasties implanted by 1 surgeon in 66 patients with rheumatoid arthritis. The mean follow-up time was 7.4 years (range, 2-13 years). All 98 acetabular components were uncemented titanium fiber metal-coated components fixed with multiple screws. Sixty-five hips had bulk or cancellous allograft for protrusio acetabuli. Following a prospective protocol based on patient age, 51 hips had an uncemented femoral component, and 47 hips had a cemented femoral component. Using the Harris Hip Score, 30 hips were rated as excellent; 44, good; 15, fair; and 9, poor. There were no early deep infections. One hybrid hip was removed for late metastatic infection at 7 years. Radiographic evaluation of 98 acetabular components showed 1 case of septic loosening, 2 cases of aseptic loosening (1 patient asymptomatic), and 1 case with severe wear and ischial osteolysis. None of the 47 cemented femoral components subsided, and osteolysis was seen in only 3 femora (7%). Of the 51 uncemented femoral components, subsidence occurred in 7 hips (14%), and osteolysis occurred in 15 hips (30%). Uncemented acetabular components have a high rate of success in patients with rheumatoid arthritis who have a total hip arthroplasty. There is a high rate of subsidence and osteolysis, however, with first-generation cementless femoral components.     

Total hip arthroplasty performed without cement in patients with femoral head osteonecrosis who are less than 50 years old

Seventy-two cementless total hip arthroplasties were performed by a single surgeon in 58 patients with the diagnosis of femoral head osteonecrosis. All patients were less than 50 years old (mean, 37 years). The mean follow-up was 84 months with a minimum of 48 months. Good-to-excellent results were maintained at final follow-up in 94% of the hips. Revision rate was 1.5% each for the cups and the stems. Mechanical failure rate was 7.6% for the cups, and 6% for the stems. If the results were analyzed excluding the data from the group of patients who received the Mittelmeier prostheses, the mechanical failure rates for the cups was 0% and for the stems was 4.2%. The probability of survival for the entire series using revision as the endpoint was 96.9% at 11 years. Survival probability decreased to 88.5% if radiographic failures were included. Excluding the Mittelmeier prostheses, survival probability was estimated to be 100% for the cups using both revision and radiographic failures as endpoints; for the stems, the survival probability was 98.0% using revision as the endpoint and 95.8% including radiographic failures. Femoral osteolysis was observed in 1.5% of the hips. No hip had acetabular osteolysis. No measurements of polyethylene wear were attempted in this study. These results appeared superior to total hip arthroplasties done with early cementing techniques in this population of young patients with femoral head osteonecrosis.     

Total hip replacement with a cementless acetabular component and a cemented femoral component in patients younger than fifty years of age

BACKGROUND: We have been using hybrid total hip arthroplasty (a cementless acetabular component and a cemented stem) in young patients. The purpose of this study was to determine the prevalence of aseptic loosening, polyethylene wear, and osteolysis after the use of this technique. METHODS: We studied a prospective consecutive series of sixty-four primary hybrid total hip replacements in fifty-five patients younger than fifty years old. There were forty-three men and twelve women; the average age at the time of the index operation was 43.4 years. The average duration of follow-up was 9.4 years. We used a cementless acetabular component without screw-holes and a cemented femoral component with a 22-mm head in all hips. Clinical follow-up with use of Harris hip ratings and radiographic follow-up were performed at six weeks; at three, six, and twelve months; and yearly thereafter. The sequential annual linear and volumetric wear rates were measured, and bone-remodeling and osteolysis were assessed. RESULTS: The mean preoperative Harris hip score was 44 points, which increased to 95 points at the time of final follow-up. No hip had aseptic loosening. One hip (2%) was revised because of late infection. The average linear wear (and standard deviation) was 0.96 +/- 0.066 mm, with an average annual rate of 0.096 +/- 0.013 mm. The average volumetric wear was 364.7 +/- 25.2 mm (3), with an average annual rate of 43.4 +/- 3.5 mm (3). Six hips (9%) had an osteolytic lesion of <1 cm in diameter in the calcar femorale (zone 7). CONCLUSIONS: Our results show that a hybrid arthroplasty with a cementless acetabular component and a smooth cemented femoral component (Ra, 0.6 mm) is effective for primary total hip replacement in young patients. Although there was no aseptic loosening and a low prevalence of osteolysis at the latest follow-up evaluation, the high rates of linear and volumetric wear of the polyethylene liner in these young patients remain a concern.     

Total hip arthroplasty using an Omniflex modular system: 5 to 12 years followup

We evaluated intermediate-term results of primary cementless Omniflex prostheses. Forty-nine patients (57 hips) with a mean age of 44 years were observed for an average of 8.6 years. The average Harris hip score was 46 points before surgery and 87 points at final followup. Revision was done in five hips (9%) in five patients. Two acetabular components (4%) were revised because of breakage of the polyethylene insert. Three femoral components (5%) were revised because of aseptic loosening. Six femoral components (10%) were radiographically loose. Overall, 11 hips (19%) were considered mechanical failures. Osteolysis was identified around three acetabular components (5%) and around 20 femoral components (35%). Nine hips (16%) had femoral osteolysis around the distal stem tip. The average annual polyethylene liner wear was 0.18 mm. These results were inferior to those using other recent cementless total hip systems.     

Uncemented total hip arthroplasty in patients 50 years of age or younger

The results of a consecutive series of uncemented total hip arthroplasties in patients 50 years or younger are reviewed. There were 41 total hip arthroplasties in 36 patients at an average follow-up period of 5.3 years. Average patient age was 42 years at the time of implantation. Preoperative Harris hip score (HHS) averaged ; the final HHS averaged 93. Radiographic evaluation revealed that the femoral stems were all solid, with no progressive subsidence, reactive lines, or osteolysis. Twenty of the hips (49%) demonstrated evidence of polyethylene wear. There was significant acetabular osteolysis in 12 of these 20 hips. Five of the acetabular cups were definitely loose; 1 was possibly loose. Three of the patients underwent revision surgery for acetabular loosening and/or osteolysis. It is concluded from this study that the femoral stem is excellent but that the original acetabular component and polyethylene locking mechanism are poor and made even worse with the use of a titanium femoral head.     

Results of porous-coated anatomic total hip arthroplasty without cement at fifteen years: a concise follow-up of a previous report

The purpose of this study was to update the results of a prospective series of primary cementless total hip arthroplasties after a minimum of fifteen years of follow-up. It is one of the first studies of cementless total hip arthroplasties followed for a minimum of fifteen years. One hundred consecutive Porous Coated Anatomic (PCA) total hip replacements were implanted between October 1983 and January 1986. Fifty-five patients (sixty-four hips) that were alive at a minimum of fifteen years postoperatively are the focus of the present study. At this time of follow-up, at an average of 15.6 years (range, fifteen to seventeen years) after the total hip arthroplasty, 17% (seventeen hips) of the entire cohort and 23% (fifteen hips) of the living cohort had undergone revision because of loosening of the acetabular component or osteolysis. Seven percent (seven hips) of the entire cohort and 6% (four hips) of the living cohort had undergone revision for loosening of the femoral component or osteolysis. Only four femoral stems had been revised for isolated loosening (without osteolysis). The PCA femoral component proved to be durable at a minimum of fifteen years postoperatively, while the acetabular component was less durable.     

High osteolysis and revision rate with the hydroxyapatite-coated ABG hip prostheses65 hips in 56 young patients followed for 5–9 years

Background?There are few reports on the outcome of uncemented HA-coated cups in young patients.Patients?I evaluated the 7-year (5–9) results of HA-coated hip prosthesis (ABG, Stryker) in a consecutive series of 65 primary arthroplasties on 56 patients (mean age 44 years). 2 patients were lost to follow-up and 3 died.Results?The cumulative survival rate with revision for any reason as endpoint at 9 years was 98% (95% CI, 96–100) for the stem, 69% (61–77) for the acetabular metal backing, and 59% (50–67) for the polyethylene liner. 15 of 65 cups were revised on average 6 years after the primary operation and 3 more are planned. Revisions were done in 3 hips because of loosening and migration of the cup, and in 12 hips because of wear and progressive osteolysis around stable components. Only hips with migration had clinical symptoms. Visual inspection of polyethylene liners revealed wear of the articulation in all cases, loosening of the locking mechanism in 10 cases and nonarticular surface deformity in 7 hips. All original stems are in situ although femoral osteolysis was seen in 12 cases and 1 hip was reoperated because of periprosthetic traumatic fracture. Despite the high revision rate, the clinical improvement was good: the average pre- and postoperative Harris Hip Scores at the most recent follow-up were 41 and 90, respectively.Interpretation?While the results on the femoral side were good, the survival rates of the acetabular cups were poor and we stopped using ABG I hip prostheses.     

A second-generation cementless total hip arthroplasty mean 9-year results

Two hundred fifty-eight primary total hip arthroplasties in 231 patients were implanted using a circumferentially, proximally porous-coated, collared femoral component and a cementless, hemispherical, porous-coated acetabular component and followed up for a mean of 9 years (5-14 years). Four femoral components were revised (2 stems for infection and 2 stems for aseptic loosening). One additional femoral component was radiographically loose at last follow-up. Nine hips underwent acetabular revision (4 for instability, 2 for infection, 2 for loosening, and 1 for osteolysis). Ten-year survivorship with revision or loosening of any component as the end point was 92%; with femoral component aseptic loosening as end point, survivorship was 98%; with acetabular aseptic loosening as the end point, survivorship was 99%. Osteolysis was identified in 26 hips (13%).     

Results and complications of total hip arthroplasties in patients with sickle-cell hemoglobinopathies: Role of cementless components

The complications and results of 16 primary and revision total hip arthroplasties in patients with sickle-cell hemoglobinopathies were evaluated. One patient died from renal failure at 1 year, leaving 15 hips in 10 patients for review at a mean follow-up period of 6 years (range, 2–12 years). There were 7 cementless primary total hip arthroplasties and 8 revision arthroplasties, 6 of which were uncemented. Patients were evaluated clinically using a standard hip rating system and radiographically using accepted criteria. There were no early or late deep infections; however, 7 of 8 primary arthroplasties and 5 of 8 revisions had one or more early complications. No cementless component demonstrated loosening; however, there was asymptomatic polyethylene wear in 2 primary arthroplasties, treated with grafting and liner exchange, and femoral osteolysis was present in 4 of 13 cementless arthroplasties, one of which was revised to permit extensive grafting. Of the original 15 arthroplasties performed by the senior author, 5 required some type of reoperation during the study. At most recent follow-up evaluation, no component in the study was radiographically loose. In the hips that did not require reoperation, the overall results were excellent in 6 hips, good in 3, and poor in 1 hip. Of the 5 hips requiring reoperation, the results were excellent in 3 hips, good in 1, and fair in 1 hip at most recent follow-up evaluation. Cementless components should be considered for all primary and revision arthroplasties in patients with sickle-cell hemoglobinopathies, but early complications are frequent and a high incidence of polyethylene wear and osteolysis requiring reoperation may be expected.     

Fixation and osteolysis in plasma-sprayed hemispherical cups with hybrid total hip arthroplasty

The optimal surface finish on cementless total hip arthroplasty is still a matter of debate. 145 hips in 130 patients with hybrid total hip arthroplasty using a hemispherical, titanium plasma-sprayed cup were followed for an average of 8.5 years. The average age was 63 years, and the average weight was 165 lb. Three hips were revised for polyethylene wear and synovitis/osteolysis. In all 3 cases, the acetabular component remained well fixed. Radiographically, 5 hips had femoral osteolysis, and 5 sockets had osteolysis in zone 2, with 4 in zone 1. There were no cases of progressive lucent lines, and no acetabular components were revised. Plasma-sprayed acetabular components remain durable up to 12 years. Moreover, in cases with wear particle overload and osteolysis, fixation was maintained at revision surgery.