Arthroskopisch assistierte Stabilisierung bei akuter und chronischer Akromioklavikulargelenksprengung

Objective

The surgical procedure aims at anatomic reduction and stabilization of the acromioclavicular joint in vertical and horizontal planes for acute separations using a trans-clavicular and trans-coracoidal suture tape fixation with additional acromioclavicular joint augmentation with a PDS cord cerclage. For chronic instability adding a tendon graft is essential for sustainable stability.

Indications

Acute und chronic acromioclavicular joint separations type Rockwood III–VI. Recurrent AC-joint instability with intact coracoid process (with tendon graft).

Contraindications

Acromioclavicular joint separations type Rockwood I–II. Asymptomatic chronic AC-separations type Rockwood III–IV. Fracture close to base of coracoid process General contraindications for (elective) surgery.

Surgical technique

Vertical reconstruction of the coraco-clavicular ligaments using a drill-guide for trans-clavicular and trans-coracoidal tunnel placement for high-strength suture tapes over titanium buttons. Additional stabilization of the AC-joint with a transosseus figure of 8 PDS suture cord cerclage.

Postoperative management

Postoperatively the arm is put in a regular sling for 6 weeks. Free active range of motion of wrist and elbow. Shoulder range of motion is limited to 30° of flexion and abduction and 80° internal and 0° external rotation for 2 weeks. Extended to active-assisted 45° flexion and abduction in weeks 3 and 4 and advanced to 60° flexion/abduction and free internal/external rotation in weeks 5 and 6. Range of motion is unlimited from week 7. Full daily life activities after 3 months, high-impact sports after 5–6 months postoperatively.

Results

The presented surgical technique reliably stabilizes the acromioclavicular joint. It’s biomechanical properties with only the single-tunnel coracoclavicular suture tapes is on the level of the native vertical stability, which can be additionally improved for better horizontal stability with the cerclage over the AC-joint.     

Die laterale Klavikulafraktur

Objective

Reposition and fixation of unstable distal clavicle fractures with a low profile locking plate (Acumed, Hempshire, UK) in conjunction with a button/suture augmentation cerclage (DogBone/FibreTape, Arthrex, Naples, FL, USA).

Indications

Unstable fractures of the distal clavicle (Jäger and Breitner IIA) in adults. Unstable fractures of the distal clavicle (Jäger and Breitner IV) in children. Distal clavicle fractures (Jäger and Breitner I, IIB or III) with marked dislocation, injury of nerves and vessels, or high functional demand.

Contraindications

Patients in poor general condition. Fractures of the distal clavicle (Jäger and Breitner I, IIB or III) without marked dislocation or vertical instability. Local soft-tissue infection.

Surgical technique

Combination procedure: Initially the lateral part of the clavicle is exposed by a 4 cm skin incision. After reduction of the fracture, stabilization is performed with a low profile locking distal clavicle plate. Using a special guiding device, a transclavicular–transcoracoidal hole is drilled under arthroscopic view. Additional vertical stabilization is arthroscopically achieved by shuttling the DogBone/FibreTape cerclage from the lateral portal cranially through the clavicular plate. The two ends of the FibreTape cerclage are brought cranially via adjacent holes of the locking plate while the DogBone button is placed under the coracoid process. Thus, plate bridging is achieved. Finally reduction is performed and the cerclage is secured by surgical knotting.

Postoperative management

Use of an arm sling for 6 weeks.

Results

Due to the fact that the described technique is a relatively new procedure, long-term results are lacking. In the short term, patients postoperatively report high subjective satisfaction without persistent pain.     

The Munich Shoulder Questionnaire (MSQ): development and validation of an effective patient-reported tool for outcome measurement and patient safety in shoulder surgery

Purpose

In this retrospective study we investigated the clinical and radiological outcome after operative treatment of acute Rockwood III-V injuries of the AC-joint using two acromioclavicular (AC) cerclages and one coracoclavicular (CC) cerclage with resorbable sutures.

Methods

Between 2007 and 2009 a total of 39 patients fit the inclusion criteria after operative treatment of acute AC joint dislocation. All patients underwent open reduction and anatomic reconstruction of the AC and CC-ligaments using PDS? sutures (Polydioxane, Ethicon, Norderstedt, Germany). Thirty-three patients could be investigated at a mean follow up of 32±9?months (range 24?C56?months).

Results

The mean Constant score was 94.3±7.1 (range 73?C100) with an age and gender correlated score of 104.2%±6.9 (88-123%). The DASH score (mean 3.46±6.6 points), the ASES score (94.6±9.7points) and the Visual Analogue Scale (mean 0.5±0,6) revealed a good to excellent clinical outcome. The difference in the coracoclavicular distance compared to the contralateral side was <5?mm for 28 patients, between 5-10?mm for 4 patients, and more than 10?mm for another patient. In the axial view, the anterior border of the clavicle was within 1?cm (ventral-dorsal direction) of the anterior rim of the acromion in 28 patients (85%). Re-dislocations occured in three patients (9%).

Conclusion

Open AC joint reconstruction using AC and CC PDS cerclages provides good to excellent clinical results in the majority of cases. However, radiographically, the CC distance increased significantly at final follow up, but neither the amount of re-dislocation nor calcifications of the CC ligaments or osteoarthritis of the AC joint had significant influence on the outcome.

Level of evidence

Case series, Level IV     

Minimalinvasive Akromioklavikulargelenk-Rekonstruktion (MINAR)

Several studies have shown that augmentation of the coraco-clavicular ligaments with a suture cerclage is a reliable technique for the treatment of AC joint dislocations. The disadvantage of this technique is its invasiveness for exposing the coracoid process. The aim of this study is to introduce a new minimally invasive technique (MINAR) for reposition and stabilization of the acromio-clavicular (AC) joint by using a button/suture cerclage (FlippTack, Karl Storz, Tuttlingen). Indications for this technique are acute AC joint dislocations Rockwood III–V. The coracoid process is exposed by a 3 cm skin incision and with the aid of a special aiming device a hole is drilled for passing the button through the coracoid. The two buttons are then fixed with a 1 mm Ethibond® suture. Thereafter, one of the buttons is pushed by a special application device through the coracoid and flips underneath the coracoid thereby fixing the suture. The remaining button is pulled through a hole in the clavicle. After repositioning the dislocated joint, the construct is fixed by a surgical knot above the clavicle button. In this study, we were able to evaluate 23 patients with a follow-up of 23 months (range 18–28 months). The mean duration of the surgical intervention was 28.6 min. Peri- or postoperative complications (e.g., vascular or nerve damage, thorax injuries, infections, thrombosis, embolism) were not encountered. Secondary reluxations did not occur. In two cases, we observed a reposition loss of half a shaft width, which did not interfere with the clinical result. The Constant Murley score was 94 points (range 89–97 points). By using our minimally invasive technique for AC joint reconstruction (MINAR), the clinical results are comparable to those achieved by commonly used suture cerclage techniques. Hardware removal like in techniques using a hook plate, Bosworth screw or a k-wire cerclage is not necessary.     

Anatomie der akromiokorakoklavikulären Region

Background

The acromioclavicular (AC) joint connects the acromion with the lateral end of the clavicle and constitutes an important load-transmitting element between the upper extremity and the skeleton of the trunk.

Aim

This review discusses functional aspects that relate the AC and the coracoclavicular (CC) ligaments to AC joint instability and lateral clavicle fracture.

Results

In terms of stability the AC and CC ligaments play a pivotal role for this region. Under normal conditions the restraint system is balanced and becomes unbalanced in cases of injury such as AC joint instability or lateral clavicular fractures. Skeletal injuries frequently affect the ligaments with their usually sharp-angled insertion sites, which alters the function of the restraint system. As a consequence these injuries lead to multidirectional dislocating forces acting on the scapula in relationship to the lateral end of the clavicle. Previously, special attention was given to the vertical dislocation of the lateral clavicle, whereas less attention was paid to other factors which could lead to dislocation in other directions. Therefore, in this review emphasis is placed on the anatomical principles of multidirectional dislocation of the AC joint the fractured lateral clavicle.

Conclusion

Current clinical classification schemes fail to sufficiently include these multidirectional dislocating forces; however, they have to be considered when choosing the appropriate treatment modality. Thus, understanding the anatomical and functional context of the AC/CC region is essential for a sound management of AC joint injuries and fractures of the distal clavicle.

     

Evaluation of the use of the hook plate in Neer type 2 lateral clavicle fractures and Rockwood types 3–5 acromioclavicular joint dislocations

Purpose

For most types of acromioclavicular (AC) injuries, treatment is well established. For Neer type 2 lateral clavicle fractures and Rockwood types 3–5 AC dislocations, the ideal treatment is still a point of debate. The purpose of this study was to evaluate the functional and radiological outcome in patients treated for one of these two lesions in our hospital.

Methods

Our study group consisted of 30 patients with a Neer type 2 lateral clavicle fracture (n = 19) or Rockwood types 3–5 AC dislocation (n = 11) treated with the clavicle hook plate. All implants were removed after healing. At a mean follow-up of 40 months (12–92), data were collected by the analysis of questionnaires (DASH, NSST, OSS, SF-36), clinical examination (Constant–Murley score), and radiological evaluation (Zanca view).

Results

The mean Constant score was 88 [standard deviation (SD) 8] compared to 92 (SD 6) on the contralateral non-operated side. The questionnaires resulted in the following scores: median DASH: 4.5 (0–70); median NSST: 100 (8–100); mean OSS: 41 (SD 8); mean SF-36: 81 (SD 12). The mean coracoclavicular (CC) and AC distances were not significantly different.

Conclusions

This study suggests that hook plate fixation is a reliable treatment for Neer type 2 lateral clavicle fractures and Rockwood types 3–5 AC injuries. It results in a good and comparable function of the shoulder when compared to the contralateral side, high union rate, good to excellent objective and subjective results, and allows early active motion with limited abduction. A disadvantage is the necessity to remove the plate.     

Instabilitätsmuster bei Akromioklavikulargelenkverletzungen vom Typ Rockwood III

Background

There is no evidence-based treatment algorithm established for acromioclavicular joint (AC joint) dislocation classified as type Rockwood III injury. Recent meta-analyses revealed no advantage of surgical treatment compared to the non-operative approach. Both surgical and non-surgical approaches have been reported with inconsistent results. Therefore, the hypothesis of the current study was that patients classified as having Rockwood grade III injury may have different degrees of horizontal AC joint instability.

Material and methods

A total of 18 consecutive patients who had sustained a dislocation of the AC joint classified as Rockwood III were evaluated radiologically to quantify the horizontal instability of the AC joint. The specific radiological investigation included lateral stress x-rays (Alexander view) und axial stress x-rays with the affected arm in a horizontal adduction position.

Results

The dynamic horizontal instability of the AC joint was found to be independent of the vertical dislocation measured in the Rockwood classification.

Conclusion

For further treatment studies Rockwood III injuries should be distinguished in patients presenting with or without a substantial horizontal AC joint instability.     

Management of acute unstable distal clavicle fracture with a modified coracoclavicular stabilization technique using a bidirectional coracoclavicular loop system

Background

Fracture of the distal clavicle is not uncommon. Despite the vast literature available for the management of this fracture, there is no consensus regarding the gold standard treatment for this fracture.

Purpose

To assess the clinical and radiographic outcomes and complications of acute unstable distal clavicle fracture when treated by a modified coracoclavicular stabilization technique using a bidirectional coracoclavicular loop system.

Methods

Thirty-nine patients (32 males, 7 females) with acute unstable distal clavicle fractures treated by modified coracoclavicular stabilization using the surgical technique of bidirectional coracoclavicular (CC) loops seated behind the coracoacromial (CA) ligament were retrospectively reviewed. Mean follow-up time was 35.7 months (range 24–47 months). The outcomes measured included union rate, union time, CC distances when compared to the patients’ uninjured shoulders, and the Constant and ASES shoulder scores, which were evaluated 6 months after surgery.

Results

All fractures displayed clinical union within 13 weeks postoperatively. The mean union time was 9.2 weeks (range 7–13 weeks). At the time of union, the CC distances on the affected shoulders were on average 0.9 mm (range 0–1.6 mm) longer than the unaffected shoulders. At 6 months after surgery, the Constant and ASES scores were on average 93.4 (72–100) and 91.5 (75–100), respectively. No complications related to the fixation loops, musculocutaneous nerve injuries, or fractures of coracoid or clavicle were recorded. One case of surgical wound dehiscence was observed due to superficial infection. Enlargement of the clavicle drill hole without migration of the buttons was observed in 9 out of 16 cases at a follow-up time of at least 30 months after the original operation.

Conclusions

Modified CC stabilization using bidirectional CC loops seated behind the CA ligament is a simple surgical technique that naturally restores stability to the distal clavicle fracture. It also produces predictable outcomes, a high union rate, good to excellent shoulder function, and a low complication rate. The buttons and suture loops were routinely removed in a second operation in order to prevent late stress fracture of the clavicle.

     

Acromioclavicular joint dislocations: radiological correlation between Rockwood classification system and injury patterns in human cadaver species

Introduction

The classification system of Rockwood and Young is a commonly used classification for acromioclavicular joint separations subdividing types I?VI. This classification hypothesizes specific lesions to anatomical structures (acromioclavicular and coracoclavicular ligaments, capsule, attached muscles) leading to the injury. In recent literature, our understanding for anatomical correlates leading to the radiological-based Rockwood classification is questioned. The goal of this experimental-based investigation was to approve the correlation between the anatomical injury pattern and the Rockwood classification.

Materials and methods

In four human cadavers (seven shoulders), the acromioclavicular and coracoclavicular ligaments were transected stepwise. Radiological correlates were recorded (Zanca view) with 15-kg longitudinal tension applied at the wrist. The resulting acromio- and coracoclavicular distances were measured.

Results

Radiographs after acromioclavicular ligament transection showed joint space enlargement (8.6 ± 0.3 vs. 3.1 ± 0.5 mm, p < 0.05) and no significant change in coracoclavicular distance (10.4 ± 0.9 vs. 10.0 ± 0.8 mm). According to the Rockwood classification only type I and II lesions occurred. After additional coracoclavicular ligament cut, the acromioclavicular joint space width increased to 16.7 ± 2.7 vs. 8.6 ± 0.3 mm, p < 0.05. The mean coracoclavicular distance increased to 20.6 ± 2.1 mm resulting in type III?V lesions concerning the Rockwood classification.

Conclusions

Trauma with intact coracoclavicular ligaments did not result in acromioclavicular joint lesions higher than Rockwood type I and II. The clinical consequence for reconstruction of low-grade injuries might be a solely surgical approach for the acromioclavicular ligaments or conservative treatment. High-grade injuries were always based on additional structural damage to the coracoclavicular ligaments. Rockwood type V lesions occurred while muscle attachments were intact.     

Surgical techniques and therapeutic results of anatomical reconstruction of coracoclavicular ligaments for acromioclavicular joint dislocations

Backgrounds

Generally, the surgical treatment for traumatic acromioclavicular joint dislocation is recommended for type 5 according to Rockwood’s classification. We believe that anatomical restoration of coracoclavicular ligament could best restore the function of the acromioclavicular joint. We attempted to correctly reconstruct the anatomy of the coracoclavicular ligament (trapezoid and conoid ligaments) in which the ipsilateral palmaris longus tendon and Endobutton were used as the reconstructing ligament and fixation material, respectively.

Study designs

Cross-sectional study.

Methods

The subjects were 16 patients (15 men and one woman). The mean age at the time of the surgery was 38.6?years. The mean time of the surgery from the injury was 16.3?days. The mean duration of postoperative follow-up was one?year and 5?months.

Results

The reduction in the acromioclavicular joint was complete in 10 of 16 patients. Meanwhile, the subluxation that represented less than 5?mm superior translation of the clavicle, occurred only in 5, that represented 5–10?mm superior translation in none, and the complete dislocation occurred in one patient. Concerning the range of motion, mean forward flexion was 171°, mean abduction was 165°, mean internal rotation was Th11, and mean horizontal adduction was 132°. Pain, fatigues on the shoulder girdle, and impairments with shoulder motion on the affected side disappeared one?month after surgery.

Conclusion

Although it requires excision of the ipsilateral palmaris longus for graft, we believe that anatomical restoration of both coracoclavicular ligaments could best restore the function of the acromioclavicular joint.     

Operative Therapie der Klavikulapseudarthrose

Objective

The objective in treating clavicular non-union is an anatomic reconstruction of the clavicle with an iliac crest bone graft and anatomic locking compression plates.

Indications

Non-union or bony defects of the clavicle larger than 1.5 cm.

Contraindications

Any suspicion of infection, elevated risk of transplant necrosis or recurrent non-union due to concomitant disease, medication, cigarette smoking (>10 cig./d), poor therapeutic compliance regarding specific postoperative management and poor physical status.

Surgical technique

Patient in beach chair position with a flexible affected arm. An longitudinal skin incision is made below the clavicle with subsequent incision through the clavipectoral fascia and the periosteum, complex multidimensional osteotomy of the clavicle with medial and lateral axial correction of the pseudarthrosis up to vital bone, harvesting of a tricortical iliac crest bone graft with the size measured in preoperative computed tomography (CT) according to the length of the healthy contralateral clavicle. Final shaping of the iliac crest bone graft regarding the future clavicular position, positioning of the anatomic plate (LCP superior anterior clavicle plate with or without lateral extension, Depuy Synthes, Umkirch, Germany) and drilling and screw insertion under radiological guidance. If necessary additional attachment of the iliac crest bone graft with suture cerclage (FiberWire, Arthrex, Karlsfeld, Germany) or screw should be carried out. A final radiological examination and hemostasis of the iliac crest with a Lyostypt collagen hemostatic fleece and the clavicle. Drains might be needed and wound closure layer by layer with sutures.

Postoperative management

Arm sling protection for 6 weeks with physiotherapeutic exercises and increased range of motion every 2 weeks and unrestricted range of motion from week 7 onwards. Full weight bearing is not allowed before week 12 and X-ray examinations to confirm bone healing should be done 3, 6, 12 and 24 weeks postoperatively. Implant removal at an earliest time point of 2 years can be performed when full osseous integration of the graft is radiologically confirmed.

Results

At our department 10 consecutive patients suffering from clavicular non-union have been treated with this technique with a minimum follow-up of 1 year. All patients showed anatomic restoration of the radiologically confirmed healed clavicle with very good patient satisfaction.     

TightRope治疗Rockwood Ⅲ型肩锁关节脱位失败病例分析

目的分析TightRope治疗肩锁关节脱位失败病例的原因,总结相关经验教训。 方法自2014年1月至2018年4月收治肩锁关节脱位RockwoodⅢ型77例,均采用TightRope重建喙锁韧带治疗,术后发生钢板脱出、松动共6例,分析其手术失败原因。 结果所有患者均获随访,随访时间3~32个月,平均14.30个月,术后3个月Constant评分（93.86±5.59）分。失败病例6例,术后3个月Constant评分（79.17±7.33）分。失败原因包括隧道建立偏斜3例,手术操作不当2例,肩锁关节过度复位1例。 结论TightRope治疗肩锁关节脱位导致失败的因素：严重的骨质疏松,隧道建立偏斜,过度复位等。     

Minimally Invasive Coracoclavicular Ligament Augmentation With a Flip Button/Polydioxanone Repair for Treatment of Total Acromioclavicular Joint Dislocation

Treatment of complete acromioclavicular joint disruption remains controversial and ranges from rehabilitation to extensive surgical reconstruction. However, high-grade injuries (type IV, V, and VI) are typically treated surgically. Most reconstruction techniques addressing these injuries selectively focus on coracoclavicular ligament augmentation because it has been shown to be the primary stabilizer of the acromioclavicular joint. The conventional coracoclavicular polydioxanone (PDS) loop, which is widely performed, has been detected to have some pivotal disadvantages, including anterior subluxation of the clavicle, extensive preparation of the coracoid, and bony avulsion of the clavicle as a result of rotational clavicle movement. Therefore we present an augmentation technique that reduces these complications by replicating the orientation of the native coracoclavicular ligament complex and providing a minimally invasive subcoracoid and clavicular fixation of a double PDS loop by use of 2 flip buttons, typically used for extracortical anterior cruciate ligament graft fixation. The key step of the procedure includes the anatomic, secure, and stable placement of the double PDS cerclage under the coracoid base transferring a flip button through a coracoid bone tunnel. Our clinical experience shows that the presented technique is easy to perform and has a comparable invasiveness to recently presented arthroscopic techniques.     

Surgical treatment of chronic acromioclavicular dislocation with biologic graft vs synthetic ligament: a prospective randomized comparative study

Background

Acromioclavicular (AC) dislocation involves complete loss of articular contact; it is defined as chronic when it follows conservative management or unsuccessful surgical treatment.

Materials and methods

The study compared the clinical and radiographic outcomes of AC joint stabilization performed in 40 patients with chronic dislocation using a biological allograft (group A) or a synthetic ligament (group B). Demographic data included: M/F: 25/15; mean age: 35 ± 3.2 years; previous surgery in 11 patients, including Weaver–Dunn (3), coracoacromial ligament repair (4), stabilization with K-wires (4). Dislocation was type III in 14 (35 %) and type IV in 26 (65 %) patients. Clinical assessment was with the Constant–Murley score (pre- and postoperative) and with the modified UCLA score. Enrollment started in January 2004 and was completed in March 2008. Patients were evaluated at 1 and 4 years. Postoperative X-rays were examined to assess joint stability in the coronal and axial planes, coracoclavicular ossification, and signs of AC joint osteoarthritis and distal clavicular osteolysis.

Results

The “biological” group achieved significantly better clinical scores than the “synthetic” group at both 1 and 4 years. Poor subjective satisfaction and lower clinical scores were found in the 3 patients (1 from group A and 2 from group B) who experienced complete postoperative dislocation. No significant correlations were found with other radiographic parameters.

Conclusions

The biological graft afforded better clinical and radiographic outcomes than the synthetic ligament in patients with chronic AC joint instability. Fixation to the clavicle constitutes the main weakness of both approaches and needs improving.     

Clinical and radiographical results after double flip button stabilization of acute grade III and IV acromioclavicular joint separations

Introduction

Persistent horizontal instability after acute acromioclavicular (AC) joint separation may provoke unsatisfactory results of conservative treatment. Hypothesis: the arthroscopically assisted double flip button stabilization of acute horizontally unstable grade III and IV AC joint disruptions results in full functional restoration and stable radiological reposition.

Materials

21 patients treated for an acute grade III or IV AC joint separation were enrolled. Clinical assessment at least 2-year postoperative included the constant score (CS) and the simple shoulder test. A panorama stress view, bilateral axial view and an AC view were obtained for radiographic evaluation.

Results

19 individuals (mean 37 years; 17 men) with 16 Rockwood type III and 3 type IV injuries were available for examination 24–51 months postoperatively. The mean CS was 90.2 points (SD 6.5) with no statistically significant difference between CS and age-adjusted normative values. The mean Simple Shoulder Test scored 11.5 points (range 8–12). Loss of reduction of more than 2 mm in the coronal plane stress views was present in 6 patients (32 %) with no associated loss of functional outcome. Two of four reported complications in four patients were treated surgically (one open revision with graft augmentation for coracoid implant break out, one arthroscopic capsular release for persistent glenohumeral stiffness).

Conclusion

Arthroscopically assisted double flip button stabilization for acute grade III and IV AC joint separation restores fully horizontal stability and age-expected shoulder function, resulting in high patient satisfaction, despite a loss of reduction observed radiographically in approximately one-third of patients.

Level of evidence

IV.     

Kombinierte AC-Gelenk-Luxation und laterale Klavikulafraktur

Background

A 55-year-old male patient sustained a dislocation of the acromioclavicular (AC) joint in combination with a distal clavicle fracture.

Methods

Following closed reduction of the fractured clavicle, arthroscopically assisted coracoclavicular fixation was performed.

Discussion and conclusion

A combined injury of a complete ac joint dislocation and a distal clavicle fracture is rare and is not included in currently available classification systems; therefore, in this article a classification and assessment of the stability of this injury as well as appropriate treatment options are discussed.

     

Evaluation of coracoclavicular stabilization of acute acromioclavicular joint dislocation with multistrand titanium cables

Purpose

The aim of this study was to evaluate the outcome of surgical treatment of acute acromioclavicular (AC) joint dislocation with multistrand titanium cables for coracoclavicular (CC) stabilization.

Methods

Forty-two patients with acute AC joint dislocation, including Rockwood type III 14 cases, type IV 2 cases and type V 26 cases, were operated with CC stabilization using multistrand titanium cables. The cables were removed 3–12 months after surgery. The function outcome was evaluated by Constant scores and visual analog scale (VAS) scores. Radiological examination included bilateral antero-posterior and axillary radiography.

Results

Three patients were lost to follow-up. Thirty-nine patients had an average follow-up time of 42 months (range 34–60). The Constant scores were 95.3 ± 9.3 at final evaluation. Preoperative and final follow-up VAS scores were 5.6 ± 1.5 and 0.4 ± 1.2, respectively (P < 0.05). Radiographs showed anatomical reduction in 32 patients. Cables breakage occurred in two patients.

Conclusions

CC stabilization with multistrand titanium cables was an effective and safe alternative to other procedures for the treatment of acute high-grade AC joint dislocations. It can provide immediate joint stabilization and allow early mobilization of limb with satisfied functional recovery.     

关节镜辅助喙锁悬吊固定联合改良Weaver-unn手术治疗陈旧性肩锁关节脱位

目的探讨关节镜辅助喙锁悬吊固定联合改良Weaver-Dunn手术治疗陈旧性肩锁关节脱位的疗效。 方法2016年3月至2017年3月,对8例陈旧性肩锁关节脱位的患者采用关节镜下喙锁间隙悬吊固定联合改良Weaver-Dunn手术,术后随访6~18个月。测量术后即刻与末次随访时的喙锁间隙差值,评估复位丢失情况,采用疼痛视觉模拟（VAS）评分及加州大学洛杉矶分校（UCLA）评分评价患者肩关节功能。 结果术后末次随访时患者喙锁间隙与术后即刻喙锁间隙差值为（0.41±0.26）mm,VAS评分为2.88分,UCLA评分为（173.6±11.3）分,患者肩锁关节丢失率低、术后疼痛及功能均得到明显改善。 结论关节镜辅助喙锁固定联合改良Weaver-Dunn技术治疗陈旧性肩锁关节脱位有较好的疗效。     

Arthroscopically guided navigation for repair of acromioclavicular joint dislocations: a safe technique with reduced intraoperative radiation exposure

Background

Accuracy evaluation of navigated image free placement of double cortical fixation buttons for coracoclavicular tunnel position in comparison to conventional drill guide based placement.

Methods

Twenty-six patients with acute acromioclavicular joint instability were included in this non-randomized cohort study. All patients were treated with a Double- TightRope technique. In 13 cases the conventional drill guide based placement was used (group 1). In 13 patients surgery was performed as a navigated procedure with a fluoro-free optoelectronic system (group 2). The number of coracoclavicular drillings per patient (First pass accuracy; FPA (%)) was documented, the subcoracoidal position of the fixation buttons has been evaluated and graded as “intended position achieved (IPA)” or “intended position not achieved (IPnA)”.

Results

In group 1 drilling had to be repeated in four patients (30.8 %) to achieve proper placement of the subcoracoidal fixation buttons. 100 % first pass accuracy was observed in group 2 (p?=?0.03). In group 1, the intended position of the subcoracoid buttons was not achieved (IPnA) in six patients (46.2 %). In group 2 all intended positions were achieved (p?=?0.005).

Conclusion

Arthroscopic controlled fluoro-free navigated coracoclavicular drilling for the repair of acromioclavicular joint dislocation has higher first pass accuracy in comparison to conventional drill guide based placement. Therefore the navigation enables a precise position of the drill holes, may reduce the risk of an iatrogenic coracoid fracture and migration of fixation devices.

Trial registration

Local institutional review board No. 061-14-10032014