Evaluation of root canal morphology of human primary molars by using CBCT and comprehensive review of the literature

Objective Knowledge of primary tooth morphology is essential for clinical dentistry, especially for root canal treatment and dental traumatology. However, this has not been well documented to date with a large sample. This study was carried out to investigate the variation in number and morphology of the root canals of the primary molars, to study the applicability of cone beam computerized tomography (CBCT) in assessing the same and to provide a comprehensive review of the literature. Materials and methods A total of 343 primary molars, without any root resorption, were divided into four main groups including the maxillary first molars, maxillary second molars, mandibular first molars and mandibular second molars. All of them were analysed in CBCT images in the axial, sagittal and coronal planes. Various parameters such as the number of roots, number of canals, the root canal type, diameter of root and root canal and root canal curvature were studied. Results Primary molars in all four groups showed variability in the number of roots and root canals. As far as length of the roots was concerned, the palatal root of the maxillary molar was found to be longest, while the distobuccal root was shortest. In mandibular molars, the mesial root was longer than the distal root. The length of distobuccal root canal of the maxillary molars and the distolingual canal of the mandibular molars was found to be shortest. The number of roots and root canals varied from two to four and three to four, respectively. The maxillary molars exhibited more one-canal than two-canal roots. Conclusion The present study provides comprehensive information to the existing literature concerning the variation in root canal morphology of the maxillary and mandibular primary molar teeth. These data may help clinicians in the root canal treatment of these teeth.     

上颌第一、第二恒磨牙牙根和根管系统的锥形束CT研究

目的：运用锥形束CT（CBCT）观察中国人群双侧上颌第一、第二磨牙的牙根和根管系统的解剖形态,为临床根管治疗提供依据。方法：选择200名患者的双侧上颌第一、第二恒磨牙（上颌第一恒磨牙354颗、上颌第二恒磨牙360颗）的CBCT扫描数据,使用NNT软件分析上颌第一、第二恒磨牙的牙根数、根管数、根管分型以及双侧对称情况。结果：上颌第一、第二磨牙主要为三根（99.44%和84.44%）。上颌第二磨牙的单根和双根较多见（15.28%）,其根管系统形态复杂,在根尖区有融合趋势。上颌第一磨牙的根管系统主要为3根四根管（78.97%）。上颌第二磨牙的三根管和四根管发现率接近（分别为47.37%和51.64%）。上颌第一磨牙的近颊根管系统主要根管分型为：Ⅳ型（57.79%）、Ⅱ型（19.83%）和Ⅰ型（15.58%）。上颌第二磨牙的近颊根管系统主要根管分型为：Ⅰ型（48.14%）、Ⅳ型（30.43%）和Ⅱ型（17.39%）。上颌第一、第二磨牙的远颊根和腭根主要为单根单根管,存在少量和罕见的变异。上颌第一、第二磨牙近颊根的根管数目和根管分型左右对称。结论：上颌第一磨牙近颊根管系统变异普遍存在,MB2根管为其主要的变异形式。上颌第二磨牙牙根数目和根管形态变异类型多,单根牙和双根牙的根管走向复杂多变。CBCT可以为识别根管形态提供准确依据。     

A study of the distobuccal root canal orifice of the maxillary second molars in Chinese individuals evaluated by cone-beam computed tomography

As is commonly understood, the root canal morphology of the maxillary molars is usually complex and variable. It is sometimes difficult to detect the distobuccal root canal orifice of a maxillary second molar with root canal treatment. No literature related to the distobuccal root canals of the maxillary second molars has been published.

Objective

To investigate the position of the distobuccal root canal orifice of the maxillary second molars in a Chinese population using cone-beam computed tomography (CBCT).

Material and methods

In total, 816 maxillary second molars from 408 patients were selected from a Chinese population and scanned using CBCT. The following information was recorded: (1) the number of root canals per tooth, (2) the distance between the mesiobuccal and distobuccal root canal orifice (DM), (3) the distance between the palatal and distobuccal root canal orifice (DP), (4) the angle formed by the mesiobuccal, distobuccal and palatal root canal orifices (∠ PDM). DM, DP and ∠ PDM of the teeth with three or four root canals were analyzed and evaluated.

Results

In total, 763 (93.51%) of 816 maxillary second molars had three or four root canals. The distance between the mesiobuccal and distobuccal orifice was 0.7 to 4.8 mm. 621 (81.39%) of 763 teeth were distributed within 1.5-3.0 mm. The distance between the palatal and distobuccal orifice ranged from 0.8 mm to 6.7 mm; 585 (76.67%) and were distributed within 3.0-5.0 mm. The angle (∠ PDM) ranged from 69. 4º to 174.7º in 708 samples (92.80%), the angle ranged from 90º to 140º.

Conclusions

The position of the distobuccal root canal orifice of the maxillary second molars with 3 or 4 root canals in a Chinese population was complex and variable. Clinicians should have a thorough knowledge of the anatomy of the maxillary second molars.     

Root and canal morphology of mandibular first and second molar teeth in a Jordanian population

Aim  To examine the root and canal morphology of mandibular permanent first and second molar teeth in a Jordanian population.
Methodology  A total of 685 extracted mandibular first and second permanent molar teeth were collected from dental clinics within north Jordan. The teeth were examined visually and the root number and morphology were recorded. After that, access cavities were prepared, pulp tissue dissolved by sodium hypochlorite and the root canals injected with Indian ink. Stained teeth were decalcified with 10% nitric acid, dehydrated with ascending concentrations of alcohol and rendered clear by immersion in methyl salicylate. The following observations were evaluated: (i) number of canals per root; (ii) number of root canals per tooth; (iii) canal configuration in each root; (iv) number and location of lateral canals and (v) presence of intercanal communications.
Results  Of 330 mandibular first molars, the majority had three (48%) or four (46%) canals, whilst 4% had a third disto-lingual root. Of 355 mandibular second molars, 58% had three canals, 19% two and 17% had four canals, whilst 10% had C-shaped roots. The most prevalent canal configuration in the mesial root of both first (53%) and second (40%) molars was type IV, and in distal roots was type I (54% in first and 79% in second molars).
Conclusions  Jordanian mandibular first and second molar teeth exhibit features close to the average Caucasian root and canal morphology.     

Evaluation of Root Canal Configuration of Maxillary Molars in a Brazilian Population Using Cone-beam Computed Tomographic Imaging: An In Vivo Study

Introduction

The aim of this study was to analyze and characterize root canal morphology of maxillary molars of the Brazilian population using cone-beam computed tomographic (CBCT) imaging.

Methods

Patients referred for a CBCT radiographic examination for accurate diagnosis and treatment planning were enrolled in the study. A total of 620 healthy, untreated, fully developed maxillary first and second molars were included (314 first molars and 306 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) fused roots, and (4) primary variations in the morphology of the root canal systems.

Results

First and second molars showed a higher prevalence of 3 separate roots, mesiobuccal, distobuccal, and palatal, with 1 canal in each root (52.87% and 45.09%, respectively). Two canals in the mesiobuccal roots represented 42.63% of teeth, whereas mesiobuccal roots of second molars presented 2 canals in 34.32%. The most common anatomic variation in the maxillary first molar was related to the root canal configuration of the mesiobuccal root, whereas the root canal system of the maxillary second molar teeth showed more anatomic variables.

Conclusions

Mesiobuccal roots of maxillary molar teeth had more variation in their canal system than the distobuccal or palatal roots. The root canal configuration of the maxillary second molars was more variable than the first molars in a Brazilian population. CBCT imaging is a clinically useful tool for endodontic diagnosis and treatment planning.     

乳磨牙根管分布及根管初尖锉型号的临床观察

目的：探寻乳磨牙根管分布及根管初尖锉使用型号,为临床乳磨牙根管治疗中寻找根管及选择合适的根管治疗器械提供参考。方法：选择169颗乳磨牙,记录每颗牙齿根管分布情况及各根管初尖锉的型号,计算各根管可进入指数。结果：上颌第一乳磨牙有3个根管,上颌第二乳磨牙有3个或4个根管,下颌第一乳磨牙有2个或3个或4个根管,下颌第二乳磨牙有3个或4个根管。第一乳磨牙根管可进入指数低于第二乳磨牙相应根管可进入指数。结论：第二乳磨牙较第一乳磨牙根管粗大,治疗器械容易进入,治疗相对容易。     

Root and canal morphology of permanent mandibular molars in a Sudanese population

AIM: To investigate variations in the root canal systems of first and second permanent mandibular molar teeth in a Sudanese population using a clearing technique. METHODOLOGY: Two hundred extracted first and second permanent mandibular molars from three cities in the state of Khartoum were studied. Access cavities were prepared and pulp tissue was removed by immersion in 5% sodium hypochlorite under ultrasonication; Indian ink was then injected into the root canal systems assisted by a vacuum applied apically. The teeth were rendered clear by demineralization and immersion in methyl salicylate before evaluation. The following observations were made (i) number of roots and their morphology; (ii) number of root canals per tooth; (iii) number of root canals per root and (iv) root canal configuration. RESULTS: Overall 59% of mandibular first molars had four canals with 3% having a third distolingual root. Seventy-eight per cent of second mandibular molars had two separate flat roots, whilst 10% were C-shaped. The most common canal system configurations were type IV (73%) and type II (14%). Inter-canal communications were more common in the mesial roots. The prevalence of inter-canal communications was 65% in first molars and 49% in second molars. CONCLUSIONS: In this sample of Sudanese teeth, 59% of the mandibular first permanent molars had four root canals whilst 10% of the mandibular second molars had C-shaped roots/canals.     

上颌第二乳磨牙根管数目的临床研究

目的 观察临床治疗中上颌第二乳磨牙根管数目.方法 选取需行上颌第二乳磨牙根管治疗的3~8岁患儿204例,共216颗患牙.常规方法开髓、制备开髓洞型,使髓室底完全暴露,用小号锉结合17%乙二胺四乙酸(ethylene diamine tetraacetic acid,EDTA)溶液探查各根管口的位置,确定并记录根管数目,根管预备完成后采用碘仿氧化锌糊剂进行根管充填.结果 216颗上颌第二乳磨牙中,122颗为3根管(占56.5%);94颗为4根管(占43.5%),根管数目变异以近中颊根第二根管(second mesiobuccal canal,MB2)出现频率较高,占比41.2%.上颌第二乳磨牙MB2的发现率在性别(X2=1.004,P=0.316)及牙位方面的差异(X2=0.072,P=0.788)没有统计学意义.结论 上颌第二乳磨牙根管数目存在较多变异,MB2发现率较高.     

Root and canal morphology of Thai maxillary molars

AIM: To investigate the root and canal morphology of 268 maxillary permanent molars collected from an indigenous Thai population. METHODOLOGY: The cleaned teeth were accessed, the pulp dissolved by sodium hypochlorite under ultrasonication, and the pulp system injected with Indian ink. The teeth were rendered clear by demineralization and immersion in methyl salicylate. The following observations were made: (i) number of roots and their morphology; (ii) number of root canals per root; (iii) root-canal configuration in each root using Vertucci's classification with additional modifications; and (iv) presence and location of lateral canals and intercanal communications. RESULTS: All the maxillary first and second molars had three separate roots. Only, half (51%) of the maxillary third molars had three separate roots; the other half had fused or conical roots. The majority of the distobuccal (98.1-100%) and palatal (100%) roots had type I canals. Over half of the mesiobuccal roots of first (65%) and second (55%) molars had two canals. The most common (44.2%) canal configuration in mesiobuccal roots of first molars was type IV (two canals, two foramina). A variety of canal types were found in the mesiobuccal roots of second molars. Maxillary third molars showed the greatest diversity of canal morphology. There was an increase in the prevalence of lateral canals towards the apical part of the roots and intercanal communications were present in 16% of each of first, second and third Thai maxillary molars. CONCLUSIONS: The mesiobuccal roots of Thai maxillary molars possessed a variety of canal system types. Over 50% of the first molars had a second mesiobuccal canal. The palatal and distobuccal canals mainly had type I canals. Only, a small proportion (7.3-13.3%) of the roots exhibited lateral canals which were the most common in the apical third     

Root and canal morphology of the mesiobuccal and distal roots of permanent first molars in a Kuwait population--a clinical study

Aim To identify the number of roots and canal configurations in permanent first molars of the indigenous Kuwaiti sub‐population and compare them against a similar group of non‐Kuwaiti population in different age groups and gender, and to determine the frequency of a second canal in the mesiobuccal root of maxillary first molars and distal root of mandibular first molars that could be located and treated in routine practice without using magnification or special lighting conditions. Methodology A total of 220 permanent first molar teeth of patients scheduled for root canal treatment over a period of 1 year were included. Patients were identified and grouped according to their nationality as Kuwaiti and non‐Kuwaiti (which included Filipinos, Indonesian Indians, Srilankans, Egyptians, Saudi Arabians and Syrians). In both nationality groups, patients were successively distributed into four groups based on their age. The first age group included patients below 20 years, the second 21–30 years, the third 31–40 years and the fourth were over 40 years. The first three groups comprised of 15 male and 15 female patients whilst the fourth group had 10 patients of each gender. Teeth with open apices, resorptions and calcification were excluded from the study. The teeth included were both clinically and radiographically examined for number of roots, the canal configuration and the presence of the additional mesiobuccal and distal canals and recorded. The simplified classification of canal configurations proposed by Weine was utilized. Results The incidence of a second canal in the mesiobuccal (MB) root of maxillary first molars and the distal root of mandibular first molars was not influenced significantly by nationality and gender. All the 110 maxillary first molars treated had three roots; 58% of MB root had one canal and 42% had two canals. The majority of the mesial roots had Weine type II canal configuration when the second mesiobuccal canal was present. All distobuccal and palatal roots had a single or type I canal configuration. Of the 110 mandibular first molars that were treated, 96% had two roots and 4% had three roots. When present, the third root was located either buccal or lingual to the main distal root. Overall 51% of the single distal roots had one canal whilst 49% had two canals. The mesial root frequently had a Weine type II canal configuration as did the distal root when a second canal was present. Pearson’s correlation analysis of both molars revealed a significant (P < 0.05) negative correlation (r = ?0.274, r = ?0.144) between age and number of canals as well as the type of canal. Conclusions The incidence of a second canal in distal roots of permanent mandibular first molars was 49% in the Kuwaiti population and this was similar to other Asian ethnic populations. Adopting modified access and troughing procedures revealed a 42% frequency of MB2 canals in maxillary first molars. The incidence of a second canal in both mesiobuccal roots of maxillary molars and distal roots of mandibular molars decreased significantly with age; no differences were noticed amongst the nationalities and gender studied. The possibility of extra roots should be anticipated in mandibular molars.     

The root and root canal anatomy of maxillary molars in a Chinese population

Abstract The purpose of this investigation was to study the prevalence of fused roots, C-shaped roots, C-shaped root canal orifices and C-shaped root canals in the maxillary molars of a Chinese population. A total of 305 first molars and 309 second molars were collected in Taiwan. The teeth were demineralized and placed in methyl salicylate to make them transparent. Root fusion was examined and the pulp chamber floor was checked for C-shaped orifices. Chinese ink was then injected into the root canal system to demonstrate possible C-shaped canals. The maxillary first molars had the palatal root fused with the mesiobuccal root in 0.3% of the cases, and with the distobuccal root in 2.0%. Teeth with C-shaped roots existed in only 0.3% of maxillary first molars, while 6.2% of the maxillary first molars and 40.1% of the maxillary second molars had fused roots. The maxillary second molars had the palatal root fused with the mesiobuccal root in 18.1% and with the distobuccal root in 2.6%; the palatal root was fused with the mesiobuccal and distobuccal root in 8.1% of the material. The maxillary second molars had a C-shaped root in 4.5% and C-shaped root canal orifices with C-shaped root canals in 4.9% of the cases. Fused roots or incompletely separated roots are common in the maxillary second molars amongst Chinese people, while C-shaped roots and root canals in maxillary molars are not frequently seen.     

Root and canal morphology of maxillary first and second permanent molar teeth in a Ugandan population

AIM: To investigate the root and canal morphology of permanent maxillary molar teeth from a Ugandan population. METHODOLOGY: Maxillary first (n = 221) and second molar (n = 221) teeth were collected from patients attending dental clinics in Kampala. Teeth were prepared using a clearing technique: the pulp chambers were accessed and the teeth placed consecutively into 5% sodium hypochlorite, 10% nitric acid, then methyl salicylate. Indian ink was injected into the pulp chambers to demonstrate the canal system. RESULTS: In the first molars, 95.9% of the teeth had separate roots. The mesiobuccal root was fused with the palatal root in 3% of specimens and with the distobuccal root in 0.5% of teeth. In the second molars, 86% of the teeth had separate roots. The mesiobuccal root was fused with the palatal root in 6.3% of specimens and with the distobuccal root in 6.8% of teeth. Apical deltas were more frequent in the mesiobuccal root when compared with distobuccal and palatal roots of both the first and second molars. A type I canal configuration (>75%) was the most frequent in all the roots of both the first and second molars. Canal intercommunications and lateral canals were more frequent in the mesiobuccal root when compared with other roots. CONCLUSIONS: The mesiobuccal root tended to have more variations in the canal system followed by the distobuccal root, whereas the palatal root had the least. The findings in root and canal morphology of this Ugandan population were different from previous studies, which may partly be attributed to racial differences.     

An in vitro study of root and canal morphology of human deciduous molars in an Iranian population

Dental caries is the most common chronic childhood disease. Deep caries and dental trauma are the two main etiologic factors responsible for pulp involvement. Better knowledge of the morphology of the root canals of deciduous teeth can improve the outcome of pulp treatment. In this study, 90 deciduous molar teeth (27 first mandibular molars, 27 first maxillary molars, 22 second mandibular molars and 14 second maxillary molars) were prepared using the clearing technique, and then dye was injected into the pulp cavity of each tooth. The roots of the teeth were examined under a stereomicroscope at × 10 magnification from different aspects. Measurements of root length and angulation were also recorded, and the data were analyzed using SPSS-16 software. Deciduous molar teeth in all four classes showed variability in the number of roots and root canals, and also differed in mean root length and angulation. Type I and IV root canal configurations were observed in the samples, and different types of curvature were recorded for the root canals in all four classes. As deciduous molar teeth exhibit morphologic differences from permanent teeth, a thorough knowledge of the root canals in the former can improve the outcome of pulp treatment.     

Analisi della morfologia radicolare e canalare di molari superiori ed inferiori in una popolazione Caucasica: studio in vivo alla CBCT

AimTo investigate the root and canal morphology of maxillary and mandibular permanent molar teeth in a Caucasian population by using Cone Beam Computed Tomography (CBCT).MethodsA total of 596 permanent molars were included. The number of roots, the number of canals per root and the root canal configurations according to the method of Vertucci were recorded.ResultsAlmost all of maxillary first molars (95.7%) had three separate roots; however, 40.3% of mesiobuccal roots had two canals (MB2). Of 157 maxillary second molars, 88.5% had three roots. Among the mesiobuccal roots, 15.1% had two canals. The majority of mandibular molars (100% of first molars, 89.4% of second molars) had two separate roots. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal.ConclusionsCBCT is an efficient method of studying root canal systems.     

Differences in the confluence of mesial canals in mandibular molar teeth with three or four root canals

Aim  To investigate the correlation between number of root canals and their confluence in mandibular molar teeth.
Methodology  A total of 553 first and 383 second mandibular molars were root filled between the beginning of 1997 and the end of 2006. Access cavities were prepared and the pulp chamber floors were carefully inspected with an endodontic explorer under magnification of 4×. After negotiating the root canal system, the 'straightest' canal of each root was instrumented. A gutta-percha cone was placed in the canal and a small file (08 or 10) was inserted to working length and then removed in all other canals. The gutta-percha cone was removed and inspected for notches indicating the presence of confluences. If it was not possible to probe completely one or more canals, the canal confluences were classified as 'not determined' (ND) if there was no sign of confluence; if a notch was present canals were considered confluent. For each tooth, the number of root canals and the presence of confluences were recorded. To test whether there was a difference in frequency of confluences between teeth with three and four root canals the chi-squared analysis with Yates' continuity correction was performed.
Results  The frequency of a confluence in mesial canals of first molars was 56% in teeth with three root canals and 34% in teeth with four canals. In second molars, it was 67 and 41%, respectively. Differences in the frequency of confluences in teeth with three and four root canals were statistically significant both in first and in second molars.
Conclusions  A greater incidence of confluent canals occurred in teeth with three rather than with four root canals both in first and second mandibular molars.     

C-shaped root canal in a maxillary first molar: a case report

AIM: This case report presents an unusual C-shaped root canal system in a maxillary first molar tooth. SUMMARY: Although C-shaped root canals are most frequently seen in the mandibular second molar, they may also appear in maxillary molars. A literature search revealed only a few case reports of C-shaped root canal systems in maxillary molars. The present case describes a C-shaped canal in the buccal root of a maxillary first molar. The endodontic access cavity displayed two canal orifices, one leading to the canal system in the buccal root, the other into the palatal root canal system. In the buccal root, what appeared to be the mesial and distal canals joined to form a single C-shaped canal. KEY LEARNING POINTS:--Careful examination of radiographs and the internal anatomy of teeth is essential.-- The location and morphology of root canals should be identified at high magnification under the microscope.     

上颌第一磨牙根管系统的研究

目的 观察上颌第一磨牙的根管系统。方法 制备50个上颌第一磨牙透明牙标本,显露根管系统的空间构型,在体视显微镜下观察并记录根管系统的形态,结合应用加以统计。结果 ①上颌第一磨牙近中颊根单根管率为66%,其中Ⅰ型占38%,双根管率为34%,远中颊根Ⅰ型占74%,腭根Ⅰ型占94%。②根管侧支、根尖分歧、根尖分叉多见于近颊根,在近颊根的发生率为40%, 远颊根的发生率为24%,腭根的发生率为6%,发生部位多见于根尖1/3。结论 上颌第一磨牙近颊根的根管系统最为复杂,根管变异较远颊根多,腭根变异最少。     

Use of cone-beam computed tomography to evaluate root and canal morphology of mandibular first and second molars in Turkish individuals

Objective: The aim of this study was to investigate the root and canal morphology of mandibular first and second molars in a Turkish population by using cone beam computed tomography (CBCT). Study design: CBCT images of mandibular first (n = 823) and second molar (n = 925) teeth from 605 Turkish patients were analyzed. The root canal configurations were classified according to the method of Vertucci. Results: The majority of mandibular molars (95.8% of first molars, 85.4% of second molars) had two separate roots; however, three roots were identified in 2.06% of first molars and 3.45% of second molars. C-shaped canals occurred 0.85% of first molars and 4.1% of second molars. Three canals were found in 79.9% of first molars and 72.8% of second molars. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal. The most common root morphology of first and second molars is the two rooted morphology with three canals. Both the mesial and distal roots showed wide variations in canal anatomy with type IV and type I canal configuration predominating in the mesial and distal roots, respectively. Conclusion: Vertucci type I and IV canal configurations were the most prevalent in the distal and mesial roots, respectively, of both the mandibular first and second permanent molar teeth. Key words:Cone-beam CT, Turkish, mandibular molars, root and canal morphology.     

Root and root canal morphology of the human permanent maxillary first molar: a literature review

The objective of this study was to review the literature with respect to the root and canal systems in the maxillary first molar. Root anatomy studies were divided into laboratory studies (in vitro), clinical root canal system anatomy studies (in vivo) and clinical case reports of anomalies. Over 95% (95.9%) of maxillary first molars had three roots and 3.9% had two roots. The incidence of fusion of any two or three roots was approximately 5.2%. Conical and C-shaped roots and canals were rarely found (0.12%). This review contained the most data on the canal morphology of the mesiobuccal root with a total of 8399 teeth from 34 studies. The incidence of two canals in the mesiobuccal root was 56.8% and of one canal was 43.1% in a weighted average of all reported studies. The incidence of two canals in the mesiobuccal root was higher in laboratory studies (60.5%) compared to clinical studies (54.7%). Less variation was found in the distobuccal and palatal roots and the results were reported from fourteen studies consisting of 2576 teeth. One canal was found in the distobuccal root in 98.3% of teeth whereas the palatal root had one canal in over 99% of the teeth studied.     

Symmetry of Root and Root Canal Morphology of Maxillary and Mandibular Molars in a White Population: A Cone-beam Computed Tomography Study In Vivo

Introduction

The aim of the present study was to use cone-beam computed tomography (CBCT) to analyze root canal anatomy and symmetry of maxillary and mandibular first and second molar teeth of a white population.

Methods

A total of 201 patients who required CBCT examinations as part of their dental diagnosis and treatment were enrolled in the present study. Overall, 596 healthy, untreated, well-developed maxillary and mandibular molar teeth (161 maxillary first molars, 157 maxillary second molars, 117 mandibular first molars, and 161 mandibular second molars) were examined by CBCT to establish the symmetry in root and canal anatomy between right and left sides in the same patient by evaluating the number of roots and root canals and the root canal configuration.

Results

Three separate roots with 3 separate canals was the normal anatomy of maxillary first and second molars. Most mandibular first and second molars had 2 separate roots, and the majority had 3 canals. In the present study, first molars, both maxillary and mandibular, exhibited greater asymmetry than the second molars. Maxillary first molars were found to be symmetrical in 71.1% of patients, whereas maxillary second molars were symmetrical in 79.6%. The remaining 28.9% and 20.4% of patients, respectively, showed asymmetry. Around 30% of the mandibular first molars and 20% of the mandibular second molars showed asymmetry.

Conclusions

The results of the present study reported a percentage of symmetry that varied from 70%–81%. These variations in symmetry should be taken in high consideration when treating 2 opposite molars in the same patient, because their anatomy may be different in up to 30% of the cases.