Comparison of 2- and 3-dimensional shoulder ultrasound to magnetic resonance imaging in a community hospital for the detection of supraspinatus rotator cuff tears with improved worktime room efficiency

Purpose

The purpose of this study was to evaluate whether 3-dimensional (3D) volumetric acquisition of shoulder ultrasound (US) data for supraspinatus rotator cuff tears is as sensitive when compared with conventional 2-dimensional (2D) US and routine magnetic resonance imaging (MRI), and whether there is improved workroom time efficiency when using the 3D technique compared with the 2D technique.

Methods

In this prospective study, 39 shoulders underwent US and MRI examination of their rotator cuff to confirm the accuracy of both the 2D and 3D techniques. The difference in sensitivities was compared by using confidence interval analysis. The mean times required to obtain the 2D and 3D US data and to review the scans were compared by using a 1-tailed Wilcoxon test.

Results

Sensitivity and specificity of 2D US in detecting supraspinatus full- and partial-thickness tears was 100% and 96%, and 80% and 100%, respectively, and similar values were obtained with 3D US at 100% and 100%, and 90% and 96.6%, respectively. Analysis of the confidence limits of the sensitivities showed no significant difference. The mean time (± SD) of the overall 2D examination of the shoulder, including interpretation was 10.02 ± 3.28 minutes, whereas, for the 3D examination, it was 7.08 ± 0.35 minutes. Comparison between the 2 cohorts when using a 1-tailed Wilcoxon test showed a statistically significant difference (P < .05).

Conclusion

3D US of the shoulder is as accurate as 2D US when compared with MRI for the diagnosis of full- and partial-thickness supraspinatus rotator cuff tears, and 3D US examination significantly reduced the time between the initial scan and the radiologist interpretation, ultimately improving workplace efficiency.     

Rotator cuff tears: assessment with MR arthrography in 275 patients with arthroscopic correlation

We assessed the diagnostic performance of magnetic resonance (MR) arthrography in the diagnosis of articular-sided partial-thickness and full-thickness rotator cuff tears in a large symptomatic population. MR arthrograms obtained in 275 patients including a study group of 139 patients with rotator cuff tears proved by arthroscopy and a control group of 136 patients with arthroscopically intact rotator cuff tendons were reviewed in random order. MR imaging was performed on a 1.0 T system (Magnetom Expert, Siemens). MR arthrograms were analyzed by two radiologists in consensus for articular-sided partial-thickness and full-thickness tears of the supraspinatus, infraspinatus, and subscapularis tendons. At arthroscopy, 197 rotator cuff tears were diagnosed, including 105 partial-thickness (93 supraspinatus, nine infraspinatus, three subscapularis) and 92 full-thickness (43 supraspinatus, 20 infraspinatus, 29 subscapularis) tendon tears. For full-thickness tears, sensitivity, specificity, and accuracy were 96%, 99%, and 98%, respectively, and for partial tears 80%, 97%, and 95%, respectively. False negative and positive assessments in the diagnosis of articular-sided partial-thickness tears were predominantly [78% (35/45)] observed with small articular-sided (Ellman grade1) tendon tears. MR arthrography is highly accurate in the diagnosis of full-thickness rotator cuff tears and is accurate in the diagnosis of articular-sided partial-thickness tears. Limitations in the diagnosis of partial-thickness tears are mainly restricted to small articular-sided tears (Ellman grade 1) due to difficulties in differentiation between fiber tearing, tendinitis, synovitic changes, and superficial fraying at tendon margins.     

Tear progression of symptomatic full-thickness and partial-thickness rotator cuff tears as measured by repeated MRI

Purpose

The purpose of this study was to analyse the natural course of symptomatic full-thickness and partial-thickness rotator cuff tears treated non-operatively and to identify risk factors affecting tear enlargement.

Methods

One hundred and twenty-two patients who received non-surgical treatment for a partial- or full-thickness supraspinatus tear were included in this study. All rotator cuff tears were diagnosed with magnetic resonance imaging (MRI), and the same modality was used for follow-up studies. Follow-up MRI was performed after at least a 6-month interval. We evaluated the correlation between tear enlargement and follow-up duration. Eleven risk factors were analysed by both univariate and multivariate analyses to identify factors that affect enlargement of rotator cuff tears. The mean follow-up period was 24.4 ± 19.5 months.

Results

Out of 122 patients, 34 (27.9%) patients had an initial full-thickness tear and 88 (72.1%) patients had a partial-thickness tear. Considering all patients together, tear size increased in 51/122 (41.8%) patients, was unchanged in 65/122 (53.3%) patients, and decreased in 6/122 (4.9%) patients. Tear size increased for 28/34 (82.4%) patients with full-thickness tears and 23/88 (26.1%) patients with partial-thickness tears. From the two groups which were followed over 12 months, a higher rate of enlargement was observed in full-thickness tears than in partial-thickness tears (6–12 months, n.s.; 12–24 months, P = 0.002; over 24 months, P < 0.001). Logistic regression revealed that having a full-thickness tear was the most reliable risk factor for tear progression (P < 0.001).

Conclusions

This study found that 28/34 (82.4%) of symptomatic full-thickness rotator cuff tears and 23/88 (26.1%) of symptomatic partial-thickness tears increased in size over a follow-up period of 6–100 months. Full-thickness tears showed a higher rate of enlargement than partial-thickness tears regardless of the follow-up duration. Univariate and multivariate analyses suggested that full-thickness tear was the most reliable risk factor for tear enlargement. The clinical relevance of these observations is that full-thickness rotator cuff tears treated conservatively should be monitored more carefully for progression than partial-thickness tears.

Level of evidence

IV.

     

Comparisons of the Various Partial-Thickness Rotator Cuff Tears on MR Arthrography and Arthroscopic Correlation

Objective

To assess the diagnostic performance of MR arthrography in the diagnosis of the various types of partial-thickness rotator cuff tears by comparing the MR imaging findings with the arthroscopic findings.

Materials and Methods

The series of MR arthrography studies included 202 patients consisting of 100 patients with partial-thickness rotator cuff tears proved by arthroscopy and a control group of 102 patients with arthroscopically intact rotator cuffs, which were reviewed in random order. At arthroscopy, 54 articular-sided, 26 bursal-sided, 20 both articular- and bursal-sided partial-thickness tears were diagnosed. The MR arthrographies were analyzed by two radiologists for articular-sided tears, bursal-sided tears, and both articular- and bursal-sided tears of the rotator cuff. The sensitivity and specificity of each type of partial-thickness tears were determined. Kappa statistics was calculated to determine the inter- and intra-observer agreement of the diagnosis of partial-thickness rotator cuff tears.

Results

The sensitivity and specificity of the various types of rotator cuff tears were 85% and 90%, respectively for articular-sided tears, 62% and 95% for bursal-sided tears, as well as 45% and 99% for both articular- and bursal-sided tears. False-negative assessments were primarily observed in the diagnosis of bursal-sided tears. Conversely, both articular- and bursal-sided tears were overestimated as full-thickness tears. Inter-observer agreement was excellent for the diagnosis of articular-sided tears (k = 0.70), moderate (k = 0.59) for bursal-sided tears, and fair (k = 0.34) for both articular- and bursal-sided tears, respectively. Intra-observer agreement for the interpretation of articular- and bursal-sided tears was excellent and good, respectively, whereas intra-observer agreement for both articular- and bursal-sided tears was moderate.

Conclusion

MR arthrography is a useful diagnostic tool for partial-thickness rotator cuff tears, but has limitations in that it has low sensitivity in bursal- and both articular- and bursal-sided tears. In addition, it shows only fair inter-observer agreement when it comes to predicting both articular- and bursal-sided tears.     

Supraspinatus tendon tears: comparison of 3D US and MR arthrography with surgical correlation

Objective

The objective of the study was to compare the diagnostic reliability of 3D US with MR arthrography in diagnosing supraspinatus tendon tears, with arthroscopic findings used as the standard.

Materials and methods

In a prospective study 50 patients who later underwent arthroscopic surgery of the rotator cuff were examined pre-operatively by 3D US with MR arthrography. The presence or absence of a full- or partial-thickness supraspinatus tendon tear and the tear size as demonstrated by each imaging and arthroscopy was recorded. The tear size was divided into three grades: small (<1 cm), medium (1-3 cm), and large (>3 cm).

Results

The arthroscopic diagnosis was a full-thickness tear in 40 patients, partial-thickness tears in 5, and intact supraspinatus tendon in 5. 3D US correctly diagnosed 35 out of 40 full-thickness tears and MR arthrography 39 out of 40 full-thickness tears. Regarding partial-thickness tears, 3D US underestimated 2 cases as no tear and overestimated 1 case as a full-thickness tear. MR arthrography underestimated 1 case as a partial-thickness tear and overestimated 2 cases as full-thickness and partial-thickness tears respectively. 3D US and MR arthrography yield a sensitivity for full-thickness tears of 87.5% and 97.5% with specificity of 90.0% and 90.0%. Based on the grading system, 3D US measurements correctly predicted the tear size of 23 (65.7%) of the 35 full-thickness tears and MR arthrography 30 (75.0%) of the 39 full-thickness tears.

Conclusion

Three-dimensional ultrasound seems to be a promising imaging modality comparable to MR arthrography for the assessment of the supraspinatus tendon tears.     

Ultrasonographic and MR diagnosis of rotator cuff disorders & shoulder joint instability

Objective

To evaluate the role and efficacy of U/S and MR in diagnosis of rotator cuff disorders and shoulder joint instability.

Patients and methods

This study included 30 patients with shoulder pain and/or movement limitation. They underwent shoulder U/S examination followed by MR examination. The U/S & MR diagnostic criteria of each patient were analyzed, compared and correlated with arthroscopic and/or orthopedic surgical findings.

Results

15 patients had with rotator cuff disorders 15/30 (50%) and 11 patients had shoulder instability 11/30 (36.7%). Out of 15 patients with rotator cuff disorders, 12 patients had rotator cuff tears 12/15 (80%) and 3 patients had tendenosis 3/15(20%). The supraspinatus muscle was involved in all cases (100%), without a significant comparable difference between U/S and MR. Out of 11 patients with shoulder instability 8 patients had anterior labral tear 8/11 (72.7%); 2 patients had superior labral tear 2/11 (18.2%) and only one patient with posterior labral tear.

Conclusion

U/S and MRI are valid diagnostic modalities in detecting, characterizing and discriminating the rotator cuff disorders, with no significant comparable difference. U/S has many challenges in patients with shoulder instability, while MR provides accurate diagnosis even without contrast.     

肩袖损伤的影像学及关节镜诊疗价值

目的探讨肩袖损伤的影像学改变及关节镜检查在诊疗中的价值。方法18例肩袖损伤术前行造影和磁共振成像(MRI)。关节镜手术18例，其中关节镜下肩峰成形减压术16例，小切口肩峰成形2例。全层肩袖损伤10例行小切口肩袖缝合，肩袖部分磨损8例行关节镜下刨削清理术。结果肩关节造影13例，其中9例显示肩关节腔与肩峰下滑囊和三角肌下滑囊沟通，4例未见异常。MRI检查18例，其中10例显示肩袖全层损伤，8例冈上肌腱信号异常为部分损伤。根据关节镜检查结果判断其诊断准确率，MRI为100％，肩关节造影69％。术后随访时间3～22个月，平均7个月。根据美国加州洛杉矶大学(UCLA)肩关节评分标准，优9例，良6例，可3例，优良率达83％。结论肩关节造影有助于全层肩袖损伤的诊断；MRI对肩袖部分和全层损伤正确诊断率和敏感性最高；关节镜治疗肩袖损伤具有微创，有利于功能恢复。     

Ultrasonography for diagnosis of rotator cuff tear

 In this study the clinical usefulness of ultrasonography in the diagnosis of rotator cuff tears was assessed. One hundred twenty-two patients undergoing preoperative ultrasonography were evaluated surgically. Three different ultrasonographic machines were applied with a 7.5-MHz linear-array transducer. Surgery confirmed a sensitivity of 79% for full-thickness tears and 50% for partial thickness tears. In 73 patients with negative ultrasonographic findings, the specifity was 100% for full-thickness tears and 90% for partial-thickness tears. The diagnostic sensitivity for full-thickness tears of the Hitachi EUB-340 system was significantly lower than those of Hitachi EUB-415 and EUB-515, and thus the former cannot be recommended for detection of rotator cuff tears. The sensitivity with regard to partial-thickness tears was also significantly lower with the Hitachi EUB-340 system as compared to the Hitachi EUB-515. There were no significant differences in false-positive rate among the three machines used. In conclusion, accurate ultrasonographic diagnosis of rotator cuff tear requires a high-resolution machine, as well as considerable experience in interpretation.     

Conventional MR in rotator cuff pathology. Is it sufficient?

Background

Magnetic resonance (MR) provides detailed information for the depiction of shoulder lesions. It allows a unique anatomical and tissue characterization providing a detailed evaluation of the rotator cuff (RC) and the surrounding bones.

Learning curve of office-based ultrasonography for rotator cuff tendons tears

Purpose

To compare the accuracy of ultrasonography and MR arthrography (MRA) imaging in detecting of rotator cuff tears with arthroscopic finding used as the reference standard.

Methods

The ultrasonography and MRA findings of 51 shoulders that underwent the arthroscopic surgery were prospectively analysed. Two orthopaedic doctors independently performed ultrasonography and interpreted the findings at the office. The tear size measured at ultrasonography and MRA was compared with the size measured at surgery using Pearson correlation coefficients (r). The sensitivity, specificity, accuracy, positive predictive value, negative predictive value and false-positive rate were calculated for a diagnosis of partial-and full-thickness rotator cuff tears. The kappa coefficient was calculated to verify the inter-observer agreement.

Results

The sensitivity of ultrasonography and MRA for detecting partial-thickness tears was 45.5 and 72.7 %, and that for full-thickness tears was 80.0 and 100 %, respectively. The accuracy of ultrasonograpy and MRA for detecting partial-thickness tears was 45.1 and 88.2 %, and that for full-thickness tears was 82.4 and 98 %, respectively. Tear size measured based on ultrasonography examination showed a poor correlation with the size measured at arthroscopic surgery (r = 0.21; p < 0.05). However, tear size estimated by MRA showed a strong correlation (r = 0.75; p < 0.05). The kappa coefficient was 0.47 between the two independent examiners.

Conclusions

The accuracy of office-based ultrasonography for beginner orthopaedic surgeons to detect full-thickness rotator cuff tears was comparable to that of MRA but was less accurate for detecting partial-thickness tears and torn size measurement. Inter-observer agreement on the interpretation was fair. These results highlight the importance of the correct technique and experience in operation of ultrasonography in shoulder joint.

Level of evidence

Diagnostic study, Level II.     

Evaluation of supraspinatus muscle tears by ultrasonography and magnetic resonance imaging in comparison with surgical findings

Objective

To evaluate the sensitivity, specificity and diagnostic accuracy of ultrasonography (US) and magnetic resonance imaging (MRI) in evaluating suspected supraspinatus muscle injury compared with surgery.

Subjects and methods

One hundred patients underwent both US and MRI for their shoulders due to shoulder pain. Forty patients with non-improved symptoms underwent surgical exploration. We compared the sensitivity, specificity and accuracy of US and MRI for detection of supraspinatus pathology, using surgical findings as ‘gold standard’.

Results

Study included 40 patients (27 men and 13 women, age range from 20 to 68 years). US had sensitivity, specificity and accuracy of 92.3%, 92.6% and 92.5%, respectively in diagnosing partial thickness tears (PTT); 92.6%, 94% and 95%, respectively in diagnosing full thickness tears (FTT). MRI had sensitivity, specificity and accuracy of 84.6%, 92.6% and 90%, respectively in diagnosing partial thickness tears (PTT); 100%, 88.2% and 95%, respectively in diagnosing full thickness tears (FTT). There was no statistically significant difference between the two techniques on one hand and surgery on the other hand in detecting both PTT and FTT.

Conclusion

US and MRI yield high sensitivity, diagnostic accuracy in detecting FTT. Regarding PTT rotator cuff tears both tests were less sensitive.     

Greater tuberosity sclerosis: Does it correlate with tear size?

Introduction

Radiographic findings of the shoulder joint have been reported in patients with rotator cuff tear, greater tuberosity changes are among the most reported.The aim of this work is to assess the greater tuberosity sclerosis as a radiographic sign of rotator cuff tear and its relation to the tear size.

MR assessment of the repaired rotator cuff: prevalence, size, location, and clinical relevance of tendon rerupture

The objectives of this study were to use magnetic resonance (MR) imaging to evaluate the prevalence, size, location, and clinical relevance of tendon rerupture following complete repair of full-thickness rotator cuff tear (RCT). A total of 78 surgically proven full-thickness rotator cuff tears in 74 patients were retrospectively included in the study. Clinical assessment was performed using the University of California at Los Angeles score. Postoperative MR imaging was evaluated to determine prevalence, size, and location of tendon rerupture. At a mean 48.4 months’ follow-up, 62 shoulders (79.5%) had favorable outcomes and 45 shoulders (57.6%) showed rerupture on MR imaging studies. Reruptures were significantly more prevalent among patients with intermediate-to-bad outcomes (81.3%), with surgically demonstrated two-tendon tears (78.9%) or three-tendon tears (100%), and with preoperative fatty degeneration of the supraspinatus muscle greater than 1 (91.6%). Reruptures were also significantly larger in those subgroups. Complete repair of RCT of all sizes may have favorable outcomes in a significant proportion of patients in spite of a high prevalence of reruptures. Preoperative tear size and degree of muscle fatty degeneration influence the prevalence and rerupture size. After repair of supraspinatus tears, reruptures tend to invade the posterior aspect of the tendon.     

Comparison of Three-Dimensional Isotropic and Two-Dimensional Conventional Indirect MR Arthrography for the Diagnosis of Rotator Cuff Tears

Objective

To compare the accuracy between a three-dimensional (3D) indirect isotropic T1-weighted fast spin-echo (FSE) magnetic resonance (MR) arthrography and a conventional two-dimensional (2D) T1-weighted sequences of indirect MR arthrography for diagnosing rotator cuff tears.

Materials and Methods

The study was approved by our Institutional Review Board. In total, 205 patients who had undergone indirect shoulder MR arthrography followed by arthroscopic surgery for 206 shoulders were included in this study. Both conventional 2D T1-weighted FSE sequences and 3D isotropic T1-weighted FSE sequence were performed in all patients. Two radiologists evaluated the images for the presence of full- or partial-thickness tears in the supraspinatus-infraspinatus (SSP-ISP) tendons and tears in the subscapularis (SSC) tendons. Using the arthroscopic findings as the reference standard, the diagnostic performances of both methods were analyzed by the area under the receiver operating characteristic curve (AUC).

Results

Arthroscopy confirmed 165 SSP-ISP tendon tears and 103 SSC tendon tears. For diagnosing SSP-ISP tendon tears, the AUC values were 0.964 and 0.989 for the 2D sequences and 3D T1-weighted FSE sequence, respectively, in reader I and 0.947 and 0.963, respectively, in reader II. The AUC values for diagnosing SSC tendon tears were 0.921 and 0.925, respectively, for reader I and 0.856 and 0.860, respectively, for reader II. There was no significant difference between the AUC values of the 2D and 3D sequences in either reader for either type of tear.

Conclusion

3D indirect isotropic MR arthrography with FSE sequence and the conventional 2D arthrography are not significantly different in terms of accuracy for diagnosing rotator cuff tears.     

MRI T2 mapping of the asymptomatic supraspinatus tendon by age and imaging plane using clinically relevant subregions

Purpose

Diagnosis of partial rotator cuff tears and tendonopathy using conventional MRI has proven variable. Quantitative T2 mapping may have application for assessing rotator cuff health. In order to evaluate the usefulness of T2 mapping for the rotator cuff, methods must be refined for mapping the supraspinatus tendon, and normative T2 values must first be acquired.

Materials and methods

This study was IRB approved. Thirty asymptomatic volunteers (age: 18–62) were evaluated with sagittal and coronal T2 mapping sequences. Manual segmentation of tendon and muscle as a unit and tendon alone was performed twice by two independent raters. Segmentations were divided into medial, middle and lateral subregions and mean T2 values calculated.

Results

Anatomic comparison of mean T2 values illustrated highest values in the medial region, lowest values in the lateral region, and intermediate values for the middle region upon coronal segmentation (p < 0.001). In sagittal segmentations, there were higher values in the medial region and no significant differences between the lateral and middle subregions. No significant differences were found with comparison across age groups. Inter and intra-rater segmentation repeatability was excellent, with coefficients ranging from 0.85 to 0.99.

Conclusion

T2 mapping illustrated anatomic variation along the supraspinatus muscle-tendon unit with low standard deviations and excellent repeatability, suggesting that changes in structure due to degeneration or changes associated with healing after repair may be detectable.     

Detection of rotator cuff tears: the value of MRI following ultrasound

Objective

To evaluate the need for additional magnetic resonance imaging (MRI) following ultrasound (US) in patients with shoulder pain and/or disability and to compare the accuracy of both techniques for the detection of partial-thickness and full-thickness rotator cuff tears (RCT).

Methods

In 4 years, 5,216 patients underwent US by experienced musculoskeletal radiologists. Retrospectively, patient records were evaluated if MRI and surgery were performed within 5 months of US. US and MRI findings were classified into intact cuff, partial-thickness and full-thickness RCT, and were correlated with surgical findings.

Results

Additional MR imaging was performed in 275 (5.2%) patients. Sixty-eight patients underwent surgery within 5 months. US and MRI correctly depicted 21 (95%) and 22 (100%) of the 22 full-thickness tears, and 8 (89%) and 6 (67%) of the 9 partial-thickness tears, respectively. The differences in performance of US and MRI were not statistically significant (p?=?0.15).

Conclusions

MRI following routine shoulder US was requested in only 5.2% of the patients. The additional value of MRI was in detecting intra-articular lesions. In patients who underwent surgery, US and MRI yielded comparably high sensitivity for detecting full-thickness RCT. US performed better in detecting partial-thickness tears, although the difference was not significant.     

Visual MRI Grading System to Evaluate Atrophy of the Supraspinatus Muscle

Objective

To investigate the interobserver reproducibility and diagnostic feasibility of a visual grading system for assessing atrophy of the supraspinatus muscle on magnetic resonance imaging (MRI).

Materials and Methods

Three independent radiologists retrospectively evaluated the occupying ratio of the supraspinatus muscle in the supraspinatus fossa on 192 shoulder MRI examinations in 188 patients using a 3-point visual grading system (1, ≥ 60%; 2, 30-59%; 3, < 30%) on oblique sagittal T1-weighted images. The inter-reader agreement and the agreement with the reference standard (3-point grades according to absolute occupying ratio values quantitatively measured by directly contouring the muscles on MRI) were analyzed using weighted kappa. The visual grading was applied by a single reader to a group of 100 consecutive patients who had undergone rotator cuff repair to retrospectively determine the association between the visual grades at preoperative state and postsurgical occurrences of retear.

Results

The inter-reader weighted kappa value for the visual grading was 0.74 when averaged across three reader pairs (0.70-0.77 for individual reader pairs). The weighted kappa value between the visual grading and the reference standard ranged from 0.75 to 0.83. There was a significant difference in retear rates of the rotator cuff between the 3 visual grades of supraspinatus muscle atrophy on MRI in univariable analysis (p < 0.001), but not in multivariable analysis (p = 0.026).

Conclusion

The 3-point visual grading system may be a feasible method to assess the severity of supraspinatus muscle atrophy on MRI and assist in the clinical management of patients with rotator cuff tear.     

Gadolinium MR Arthrography of the Rotator Cuff

Conventional magnetic resonance imaging (MRI) of the rotator cuff has not done well in distinguishing partial-thickness tears from tendonitis or small, full-thickness tears. However, these are important distinctions for orthopedic surgeons who are deciding whether to operate and what type of surgery to perform on a patient with suspect rotator cuff pathology. Gadolinium magnetic resonance arthrography (MRA) involves injecting dilute gadolinium into the shoulder under fluoroscopy. Subsequent multiplanar T1-weighted fat-suppressed fast spin echo combined with T2-weighted fast spin echo and short tau inversion recovery (STIR) produces images that can accurately differentiate absence of tear from partial-thickness tear and from small, full-thickness tear; as a fringe benefit, this combination of sequences can identify the inflammation associated with tendonitis. Furthermore, the technique differentiates articular from bursal surface partial-thickness tears, and it accurately quantitates the size of full-thickness tears to help surgeons choose between arthroscopic versus open surgery.     

Comparison of the MR findings on indirect MR arthrography in patients with rotator cuff tears with and without symptoms

Purpose To compare indirect magnetic resonance (MR) arthrography findings in patients with rotator cuff tears with and without symptoms. Materials and Methods Indirect MR arthrography results of 15 asymptomatic and 23 symptomatic rotator cuff tears were retrospectively reviewed, comparing the type and size of tears and amount of subacrominal-subdeltoid bursal fluid. Results There were 14 partial-thickness tears and one full-thickness tear in the asymptomatic group, with 4 small and 11 medium tears. In the symptomatic group, there were 16 partial-thickness and 7 full-thickness tears, with 14 small, 5medium, and 4 large tears. In the asymptomatic group, the amount of subacrominal-subdeltoid bursal fluid was grade 0, 6 patients; grade 1, 6 patients; grade 2, 2 patients; and grade 3, 1 patient. In the symptomatic group, the amount of subacrominal-subdeltoid bursal fluid was grade 0, 4 patients; grade 1, 3 patients; grade 2, 8 patients; and grade 3, 8 patients. We found no statistically significant difference between symptomatic and asymptomatic tears in the kind and size of tears, and in the amount of subacrominal-subdeltoid bursal fluid. Conclusion We found no difference in the MR findings between symptomatic and asymptomatic rotator cuff tears.     

Sonography of the painful shoulder: role of the operator’s experience

Objective  The aim of our study was to determine the role of the operator’s experience in the sonographic evaluation of the painful shoulder and to validate assumptions about its technical performance in routine practice. Materials and methods  Two radiologists, respectively standard and expert sonographic operators, independently and prospectively scanned 65 patients with clinical suspicion of rotator cuff lesion. Magnetic resonance arthrography was the reference standard. Results  The sensitivity of the expert ultrasound operator was 95.3% for full-thickness rotator cuff tears (41/43), 70.6% for partial-thickness tears (12/17), 64.3% for intratendinous tears (9/14), 100% for abnormality of the long head of biceps tendon (seven of seven), 88.9% for supraspinatus tendinosis (16/18), 96.4% for subacromial bursa abnormalities (53/55), and 91.7% for acromioclavicular joint osteoarthritis (33/36). The two sonographic operators were in very good agreement about full-thickness rotator cuff tears (κ = 0.90), supraspinatus tendinosis (κ = 0.80), abnormalities of the long head of biceps tendon (κ = 0.84), subacromial bursa abnormalities (κ = 0.89), and acromioclavicular osteoarthritis (κ = 0.81). The agreement was only moderate for partial-thickness tears (κ = 0.63) and intratendinous tears (κ = 0.57). Conclusions  Our results show that in moderately experienced hands as in experts’ hands, sonography has a low level of interobserver variability for full-thickness rotator cuff tears. Considering partial-thickness and intratendinous rotator cuff tears, our data suggest that interobserver variability is higher.