Complication rates and reduction potential of palmar versus dorsal locking plate osteosynthesis for the treatment of distal radius fractures

Background

The aim of this study was to evaluate the complication rates of volar versus dorsal locking plates and postoperative reduction potential after distal radius fractures.

Materials and methods

For this study 285 distal radius fractures (280 patients/59.4 % female) treated with locked plating were retrospectively evaluated. The mean age of the patients was 54.6 years (SD 17.4) and the mean follow-up was 33.2 months (SD 17.2). The palmar approach was used in 225 cases and the dorsal approach in 60 cases (95 % type C fractures).

Results

Adequate reduction was achieved with both approaches, regardless of fracture severity. In the dorsal group, the complications and implant removal rates were significantly higher and the operative time was also longer.

Conclusions

Based on these facts, we advocate the palmar locking plate for the vast majority of fractures. In cases of complex multifragmentary articular fractures where no compromise in reduction is acceptable, and with the biomechanical equality of palmar and dorsal plating remaining unproven, dorsal plating may still be considered.

Level of evidence

Therapeutic level IV.     

Are Volar Locking Plates Superior to Percutaneous K-wires for Distal Radius Fractures? A Meta-analysis

Background

Distal radius fractures are common, costly, and increasing in incidence. Percutaneous K-wire fixation and volar locking plates are two of the most commonly used surgical treatments for unstable dorsally displaced distal radius fractures. However, there is uncertainty regarding which of these treatments is superior.

Questions/purposes

We performed a meta-analysis of randomized controlled trials to determine whether patients treated with volar locking plates (1) achieved better function (2) attained better wrist motion, (3) had better radiographic outcomes, and (4) had fewer complications develop than did patients treated with K-wires for dorsally displaced distal radius fractures.

Methods

We performed a comprehensive search of MEDLINE (inception to 2014, October Week 2), EMBASE (inception to 2014, Week 42), and the Cochrane Central Register of Controlled Trials to identify relevant randomized controlled trials; we supplemented these searches with manual searches. We included studies of extraarticular and intraarticular distal radius fractures. Adjunctive external fixation was acceptable as long as the intent was to use only K-wires where possible and external fixation was used in less than 25% of the procedures. We considered a difference in the DASH scores of 10 as the minimal clinically important difference. We performed quality assessment with the Cochrane Risk of Bias tool and evaluated the strength of recommendations using the Grades of Recommendation, Assessment, Development and Evaluation (GRADE) approach. Seven randomized trials with a total of 875 participants were included in the meta-analysis.

Results

Patients treated with volar locking plates had slightly better function than did patients treated with K-wires as measured by their DASH scores at 3 months (mean difference [MD], 7.5; 95% CI, 4.4–10.6; p < 0.001) and 12 months (MD, 3.8; 95% CI, 1.2–6.3; p = 0.004). Neither of these differences exceeded the a priori-determined threshold for clinical importance (10 points). There was a small early advantage in flexion and supination in the volar locking plate group (3.7° [95% CI, 0.3°–7.1°; p = 0.04] and 4.1° [95% CI, 0.6°–7.6°; p = 0.02] greater, respectively) at 3 months, but not at later followups (6 or 12 months). There were no differences in radiographic outcomes (volar tilt, radial inclination, and radial height) between the two interventions. Superficial wound infection was more common in patients treated with K-wires (8.2% versus 3.2%; RR = 2.6; p = 0.001), but otherwise no difference in complication rates was found.

Conclusions

Despite the small number of studies and the limitations inherent in a meta-analysis, we found that volar locking plates show better DASH scores at 3- and 12-month followups compared with K-wires for displaced distal radius fractures in adults; however, these differences were small and unlikely to be clinically important. Further research is required to better delineate if there are specific radiographic, injury, or patient characteristics that may benefit from volar locking plates in the short term and whether there are any differences in long-term outcomes and complications.

Level of Evidence

Level I, therapeutic study.

Electronic supplementary material

The online version of this article (doi:10.1007/s11999-015-4347-1) contains supplementary material, which is available to authorized users.     

Fatigue performance of angle-stable tibial nail interlocking screws

Purpose

Tibial nail interlocking screw failure often occurs during delayed fracture consolidation or at early weight bearing of nailed unstable fractures, in general when high implant stress could not be reduced by other means. Is there a biomechanical improvement in long-term performance of angle stable locking screws compared to conventional locking screws for distal locking of intramedullary tibial nails?

Methods

Surrogate bones of human tibiae were cut in the distal third and distal locking of the 10 mm intramedullary tibial nail was performed with either two angle stable locking screws or two conventional locking screws in the mediolateral plane. Six specimens per group were mechanically tested under quasi-static and cyclic axial loading with constantly increasing force.

Results

Angle stable locking screw constructs exhibited significantly higher stiffness values (7,809 N/mm ± 647, mean ± SD) than conventional locking screw constructs (6,614 N/mm ± 859, p = 0.025). Angle stable locking screw constructs provided a longer fatigue life, expressed in a significantly higher number of cycles to failure (187,200 ± 18,100) compared to conventional locking screw constructs (128,700 ± 7,000, p = 0.004).

Conclusion

Fatigue performance of locking screws can be ameliorated by the use of angle stable locking screws, being especially important if the nail acts as load carrier and an improved stability during fracture healing is needed.     

The use of a single volar locking plate for AO C3-type distal radius fractures

Background

A single volar locking plate (VLP) is now frequently used for open reduction and internal fixation (ORIF) of many types of distal radius fractures. Comminuted intra-articular distal radius fractures (AO C3-type) are typically the most challenging to surgically treat. No studies directly address the adequacy of a VLP alone for maintaining reduction of AO C-type fractures. We hypothesized that a single VLP provides an effective method for maintaining reduction for these fractures.

Methods

We retrospectively evaluated radiographs of a series of AO C-type fractures. Seventy-seven patients with 77 AO C3-type fractures were identified from billing records and were eligible for the study. All patients were treated by fellowship-trained hand surgeons. Radiographs at the time of union were compared to those from immediately postoperatively.

Results

Sixty-nine of 77 (89.6 %) fractures treated with VLP fixation alone for AO C3-type distal radius fractures united without loss of reduction. Eight of 77 (10.4 %) patients treated with VLP for AO C3 fractures lost reduction. The most common fracture fragment to lose reduction was the lunate fossa (5 of 8); loss of reduction of the scaphoid fossa die-punch fragment (2 of 8) and the radial styloid (1 of 8) were also seen.

Conclusions

The majority (89.6 %) of AO C3-type fractures treated with a single volar locking plate come to union without loss of reduction.Level of evidence: Level IV.     

Postsurgical complications following distal radius volar plating in a diabetic population at short-term follow-up

Background

Diabetes mellitus increases the risk of complications following operative treatment of lower extremity fractures. There is little published data establishing the impact of diabetes following surgical treatment of upper extremity fractures. This investigation aimed to compare the incidence of short-term postsurgical complications following volar locked plating of distal radius fractures in patients with and without diabetes.

Methods

A retrospective matched cohort investigation of 33 diabetics matched 1:2 to 66 non-diabetics was performed, accounting for age, gender, fracture type, and smoking status. Electronic medical records and radiographs were reviewed for all major and minor postsurgical complications. Demographic characteristics, postoperative radiographic parameters, and final range of motion were also compared. Mean follow-up was 5.3 ± 8.2 and 5.5 ± 7.8 months for diabetics and non-diabetics, respectively.

Results

The diabetic cohort had a significantly higher overall complication rate with 24 postsurgical complications affecting 12 patients (36 %) compared to 16 complications affecting 12 patients (18 %) in the non-diabetic cohort. There was no difference in the incidence of major complications requiring operative intervention. Minor complications were significantly more common in the diabetic group and were largely accounted for by peripheral neuritis with an incidence of 30 %. Final radiographic outcomes and range of motion were similar.

Conclusions

Diabetics experienced a greater incidence of minor postsurgical complications following volar locked plating of distal radius fractures when compared to a matched, control population. The difference in outcomes is largely accounted for by the increased incidence of peripheral neuritis among diabetics. Diabetic patients should be counseled pre-operatively regarding their elevated risk profile.     

Malunited extra-articular distal radius fractures: corrective osteotomies using volar locking plate

Background

Multiple techniques for corrective osteotomy have been developed in recent years with the same aims: to improve the radiographic parameters and improve motion, pain and grip strength. Volar fixed-angle plates have added a new concept to the treatment of distal radius fractures thanks to the low morbidity of the surgical approach and the strength of the final construct, allowing early mobilization and return to function.

Materials and methods

Between 2005 and 2012, 20 patients with symptomatic dorsally malunited extra-articular fractures of the distal radius underwent corrective osteotomy using a volar locking plate without additional bone graft. At a mean follow-up of 50 months, all the patients were clinically and functionally evaluated.

Results

All measurements of pain, final range of motion and grip strength significantly improved compared with preoperative measurements. The mean preoperative DASH score reduced from 54 points preoperatively to 25 postoperatively. Based on the modified Mayo wrist score, we obtained 14 excellent and six good results. Palmar tilt improved from an average of 23° to 11°. Radial inclination improved from an average of 29° to 22°, and ulnar variance decreased from an average of 3.6 mm to 0.9 mm. There were two cases of transient median neuroapraxia that resolved before the 6-week follow-up appointment. No other major complications, including non-union and infection, were observed.

Conclusion

The volar approach and locking plate, without necessarily the use of bone grafting, proved to be an effective approach for addressing symptomatic and even severe deformities of the distal radius.

Type of study/level of evidence

Therapeutic IV     

Intramedullary repair device against volar plating in the reconstruction of extra-articular and simple articular distal radius fractures; a randomized pilot study

Purpose

This prospective randomized pilot study reports our institutional experience and early results using Sonoma Wrx (Sonoma Orthopedic Products, Santa Rosa, CA) in the treatment of extra-articular and simple intra-articular distal radius fractures.

Material and methods

A total of 64 patients, were enrolled in the study. They were considered eligible if they had; unstable extra-articular distal radius fractures and simple intra-articular distal radius fractures suitable for closed reduction (AO types; A2.2, A2.3, A3.1 C2.1, C2.2). Patients in group I received intramedullary fixation using the Sonoma Wrx® device and patients in group II received standard volar locking plate fixation. Radiographic criteria of acceptable healing were used for evaluation.

Results

Two groups were similar in terms of baseline characteristics. Mean time of operation was significantly shorter in Group 1 vs. in group 2 (36.81 ± 7.11 vs. 48.97 ± 5.9 minutes, p = 0.001). Time to healing of the fracture was not different between two groups (5.45 ± 1.09 vs. 5.70 ± 1.04 weeks for Group 1 vs. 2, respectively p = 0.36). Overall complications occurred in 9 patients in group 1 and in 15 patients in group 2 (p = 0.17). Follow-up was completed in all patients with a median time of 12 months and 13 months in group 1 and 2, respectively. On radiographic evaluation radial inclination, radial height and volar tilt were not significantly different between group 1 and 2, respectively. There were no significant differences between two groups in regard to wrist rotational degrees measured in last follow-up visit.

Conclusion

Sonoma Wrx Device is reliable and effective in terms of achieving satisfactory outcomes in treatment of distal radius fractures. It may be reasonable to use this device to prevent complications that are related to extensive soft tissue dissection.     

External fixation versus volar locking plate for displaced intra-articular distal radius fractures: a prospective randomized comparative study of the functional outcomes

Background

The objective of the study was to compare the efficacy of external fixation and volar plating on the functional parameter of displaced intra-articular (Cooney’s type IV) distal end radius fractures using the Green and O’Brien scoring system.

Materials and methods

This prospective randomized study comprised 68 patients treated with external fixation and 42 patients treated with volar locking plates. The patients were followed up at 6 months and 1 year after surgery. The assessment of pain, range of motion, grip strength and activity were assessed at each follow-up visit and scored according to the Green and O’Brien scoring system.

Results

At 1 year after surgery, we observed that external fixation showed significantly better results than volar locking plates using the Green and O’Brien scores for range of motion (22.0 ± 4.77 vs 19.89 ± 5.05), grip strength (19.91 ± 5.4 vs 16.89 ± 4.4) and final outcome (87.36 ± 11.62 vs 81.55 ± 11.32). No difference was found in pain and activity between these two groups of patients. Patients aged <50 years treated with external fixation showed excellent results (final score (91.57 ± 9.01) at 1 year follow-up.

Conclusion

External fixation showed superiority over volar locked plating after 1 year of surgery.

Level of evidence

IV.     

Scapholunate instability after distal radius volar plating

Background

Prior to volar locked plating and early motion protocols, ligamentous injuries incidentally associated with distal radius fractures may have been indirectly treated with immobilization. Our goal was to determine the prevalence of scapholunate instability in our population, while identifying those who may have had progression of instability.

Methods

We retrospectively reviewed 221 distal radius fractures treated with a volar locking plate during a 6-year period. Average patient age was 59 years. Standard posteroanterior and lateral radiographs from the first and last postoperative visits were analyzed for scapholunate instability, using the criteria of scapholunate gap ≥3 mm and scapholunate angle ≥60°.

Results

Six patients (3 %) met neither or only one criterion for instability at the first postoperative visit and did not have ligament repair and then went on to meet both criteria at the last postoperative visit after an early motion protocol. Seven patients (3 %) met both criteria at the first and last postoperative visits and did not have ligament repair. Five patients (2 %) underwent primary scapholunate ligament repair at the time of distal radius fixation.

Conclusions

In our representative population, scapholunate instability was uncommon, either from initial injury or possible progression of occult ligament injury, despite early motion without operative treatment of the ligament. Thus, we did not find strong evidence for routinely delaying motion or pursuing further workup. When early radiographs clearly demonstrate acute scapholunate instability, more aggressive treatment may be appropriate for selected patients.     

Critical analysis of tibial fracture healing following unreamed nailing

Purpose

Unreamed nails have revolutionised the treatment of tibial shaft fractures. Many authors, however, have reported increasing bone healing complications with these implants. Unfortunately, few studies have addressed the factors affecting bone healing after unreamed tibial nailing.

Methods

One-hundred and sixty tibial fractures in 158 patients (mean age 39.5 years) fixed using unreamed nails were reviewed. There were 78 AO type-A, 65 type-B and 17 type-C fractures (115 closed and 45 open fractures). Twelve patient, injury and surgery variables were analysed for their influence on fracture healing.

Results

Union occurred in all fractures after a mean time of 24.3 weeks. Additional surgery to achieve union, apart from dynamisation, was done in nine (6%) cases. The most important variables affecting healing were the mechanism of trauma (p = 0.005), fracture site gap (p = 0.01), degree of comminution (p = 0.0003), associated soft tissue injuries (p = 0.02) and the time to dynamisation (p = 0.0001).

Conclusions

High-energy trauma and fracture comminution have a negative impact on bone union and require close follow-up. It is essential to avoid distraction over three millimetres with unreamed nailing. Dynamisation is advised within ten weeks in axially stable fractures to encourage bone healing and avoid failure of the locking screws.     

Radiographic interpretation of distal radius fractures: visual estimations versus digital measuring techniques

Purpose

Distal radius fractures are a common injury. In the emergency room, trainees regularly assess these fractures using visual estimation. Our hypothesis is that assessment of radiographic parameters has sufficient accuracy for rendering treatment consistent with formal measurements.

Methods

This study compared visual measurements made by 25 orthopaedic residents and attending physicians to formal measurements made by a single fellowship trained musculoskeletal radiologist in a series of patients with distal radius fractures. A search was performed utilizing the ICD-9 code for distal radius fracture in all patients presenting to a single institution emergency department. Participants used visual estimation to rate 25 radiographs. Parameters estimated included radial inclination, radial height, volar tilt, and the presence of intra-articular displacement. Analysis using Lin concordance coefficients, Bland Altman plots, and the Kappa statistic evaluated the agreement between visual estimation and formal measurements. The proportion of raters whose estimates would have resulted in a course of treatment that conflicted with the formal reading quantified the potential impact of visual estimation on treatment.

Results

Concordance coefficients were poor for radial inclination (ρc = 0.13), radial height (ρc = 0.24), and volar tilt (ρc = 0.46). The Kappa statistic for intra-articular displacement was 0.4. Analysis performed according to level of training did not result in substantial improvements in these statistics. Treatment based on visual estimates conflicted with formal readings 34 % of the time for radial inclination, 38 % of the time for radial height, 27 % of the time for volar tilt, and 31 % of the time for intra-articular displacement.

Discussion

Visual estimation is not an adequate form of measurement for evaluation of patients with distal radius fractures. Physicians should be mindful of these results when developing treatment plans based solely upon visual estimation.     

In vitro kinematics of the proximal interphalangeal joint in the finger after progressive disruption of the main supporting structures

Background

Fractures and dislocations of the proximal interphalangeal (PIP) joint of the fingers are among the most common causes of injury in the hand. Objective assessment of the kinematic alterations occurring when the supporting structures are disrupted is critical to obtain a more accurate indication of joint stability.

Methods

An in vitro cadaver model of the hand was used to evaluate the kinematics of the PIP joint in the finger during active unrestrained flexion and extension. The kinematics of the PIP joint following progressive disruption of the main supporting structures was measured using an optical tracking system and compared with those in the intact joint.

Results

Flexion of the intact PIP joint was associated with joint compression, volar displacement, and rotational movements. Release of the main soft-tissue stabilizers and 30 % of volar lip disruption resulted in substantial alteration of several kinematic variables. The normalized maximum dorsal/volar translation was 0.1 ± 1.3 % in the intact group and 14.4 ± 11.3 % in the injured joint.

Conclusions

In the intact PIP joint, rotations and translation are strongly coupled to the amount of joint flexion. Gross instability of the PIP joint occurs when disruption of the collateral ligaments and volar plate is accompanied by resection of at least 30 % of volar lip of the middle phalanx. Collateral ligament injuries, volar plate injuries alone, and fractures at the volar base of the middle phalanx that involve less than 30 % of the articular surface are unlikely to result in gross instability and may be managed effectively with non-operative treatments.     

Locking Buttons Increase Fatigue Life of Locking Plates in a Segmental Bone Defect Model

Background

Durability of plate fixation is important in delayed union. Although locking plates result in stronger constructs, it is not known if locking affects the fatigue life of a plate. Two locking screws on either side of the nonunion could decrease working length and increase strain in the plate. However, the reinforcing effect of the locking head on the plate may compensate, so that it is unclear whether locking reduces fatigue life.

Questions/purposes

We determined whether locking screws, compression screws, and locking buttons reduce or increase the fatigue life of a plate.

Methods

We tested fatigue life of four constructs using an eight-hole locking plate in a segmental defect model: (1) all locking screws (Locked; n = 5); (2) all compression screws (Unlocked; n = 5); (3) six compression screws with two locking buttons in the central holes (Button; n = 6); and (4) six compression screws with two open central holes (Open; n = 6).

Results

The Button group had the longest fatigue life (1.3 million cycles). There was no difference between the Locked and Unlocked groups. All of the constructs failed by fracture of the plates through a screw hole adjacent to the defect.

Conclusions

Locking screws did not improve fatigue life, however a locking button increased the fatigue life of a locking plate in a segmental bone defect model.

Clinical Relevance

Locking buttons in holes adjacent to a defect may improve durability, which is important when delayed union is a possibility.     

Minimally invasive percutaneous osteosynthesis for proximal humeral shaft fractures with the PHILOS through the deltopectoral approach

Purpose

The aim of this study was to evaluate clinical outcomes and complications following minimally invasive plate osteosynthesis (MIPO) with the proximal humeral internal locking system (PHILOS) for treating proximal humeral shaft fracture through the deltopectoral approach.

Methods

Between November 2008 and March 2010, 74 patients with unilateral proximal humeral shaft fractures were treated using the MIPO technique with the PHILOS through the deltopectoral approach. Patients received an average follow-up of 16.9 (range, 12–24) months, and the final follow-up included anteroposterior and lateral imaging and recording of postoperative complications. The Constant–Murley shoulder score was used to evaluate function.

Results

No intraoperative complications occurred. Postoperative complications included subacromial impingement in four patients. There was no deep infection, neurovascular damage, breakage or implant loosening. All fractures united in an average time of 17.4 (15–25) weeks. In terms of function, the Constant–Murley score was 85.8 points on average (range, 67–100). The range of motion of the involved shoulder was satisfactory, and pain-free in 83.8 % of patients.

Conclusions

Using the MIPO technique with the PHILOS through the deltopectoral approach is a valid and safe method of treating proximal humeral shaft fractures.     

Locking plate osteosynthesis of clavicle fractures: complication and reoperation rates in one hundred and five consecutive cases

Purpose

Locking plate osteosynthesis has become the preferred method for operative treatment of clavicle fractures. The method offers stable fixation, and would theoretically be associated with a low rate of fracture-related complications and reoperations. However, this remains to be explored in a large cohort, and our purpose was to assess the overall rates of complications and reoperations following locking plate osteosynthesis of mid-shaft clavicle fractures.

Methods

We identified all locking plate osteosynthesis of mid-shaft clavicle fractures operated upon in our department from January 2008 to November 2010 (n = 114). Nine patients did not attend the follow-up at our institution. The study group of 105 fractures (104 patients, 86 males) had a median age of 36 years (14–75 years). Follow-up ranged from 0.5 to 3.5 years. No patients were allowed to load the upper extremity for six weeks. By studying patient files and radiographic material, we assessed complications and reoperations.

Results

Overall, there were 31 cases (30 %) of plate removals for discomfort. There were five cases (5 %) of failure of osteosynthesis: two occurred early after approximately six weeks and three late after ten to 13 months postoperatively.

Conclusion

The overall rate of failure of osteosynthesis is low (5 %). The burden of plate removals in approximately one third of patients should be included in the preoperative information.     

Intramedullary fixation of distal fibular fractures: a systematic review of clinical and functional outcomes

Background

Ankle fractures are extremely common and represent nearly one quarter of all lower-limb fractures. In the majority of patients, fractures involve the distal fibula. The current standard in treating unstable fractures is through open reduction and internal fixation (ORIF) with plates and screws. Due to concerns with potentially devastating wound complications, minimally invasive strategies such as intramedullary fixation have been introduced. This systematic review was performed to evaluate the clinical and functional outcomes of intramedullary fixation of distal fibular fractures using either compression screws or nails.

Materials and methods

Numerous databases (MEDLINE, PubMed, Embase, Google Scholar) were searched, 17 studies consisting of 1,008 patients with distal fibular fractures treated with intramedullary fixation were found.

Results

Mean rate of union was 98.5 %, with functional outcome reported as being good or excellent in up to 91.3 % of patients. Regarding unlocked intramedullary nailing, the mean rate of union was 100 %, with up to 92 % of patients reporting good or excellent functional outcomes. Considering locked intramedullary nailing, the mean rate of union was 98 %, with the majority of patients reporting good or excellent functional outcomes. The mean complication rate across studies was 10.3 %, with issues such as implant-related problems requiring metalwork removal, fibular shortening and metalwork failure predominating.

Conclusion

Overall, intramedullary fixation of unstable distal fibular fractures can give excellent results that are comparable with modern plating techniques. However, as yet, there is unconvincing evidence that it is superior to standard techniques with regards to clinical and functional outcome.

Level of evidence

Level IV evidence.     

Comparative study of fresh femoral neck fractures managed by multiple cancellous screws with and without fibular graft in young adults

Objectives

Aim of our study was to assess the role of addition of fibular strut graft to multiple cancellous screws in functional outcome, union and complications associated with those managed by only multiple cancellous screws in fresh femoral neck fractures.

Methods

A randomized control trial study was conducted on the patients of femoral neck fractures managed with multiple cancellous screws (group A) and multiple cancellous screws with fibular graft (group B). Patients aged between 20 and 50 years, having Gardens type III or IV fracture with duration of injury less than two weeks were included in the study.

Results

Eighty seven cases were analysed n = 45 were in group A and n = 42 in group B. Functional outcome (Harris hip score) was excellent in 30 patients in group A as compared to 12 in Group B which was statistically significant favouring group A. The time of full weight bearing, union and non union rates showed no statistical significance (p > 0.05). On statistical grounds none of the procedures proved to be better than other.

Conclusions

Fresh femoral neck fracture in young adults managed with multiple cancellous screws fixation with fibular graft has no added advantage over multiple cancellous screws fixation alone.     

Evaluation of proximal femoral locking plate in unstable extracapsular proximal femoral fractures: Surgical technique & mid term follow up results

Background

Stable trochanteric femur fractures can be treated successfully with conventional implants such as sliding hip screw, cephalomedullary nails, angular blade plates. However comminuted and unstable inter or subtrochanteric fractures with or without osteoporosis are challenging & prone to complications. The PF-LCP is a new implant that allows angular stability by creating fixed angle block for treatment of complex, comminuted proximal femoral fractures.

Method

We reviewed 30 patients with unstable inter or subtrochanteric fractures, which were stabilized with PF-LCP. Mean age of patient was 65 years, and average operative time was 80 min. Patients were followed up for a period of 3 years (June 2010–June 2013). Patients were examined regularly at 3 weekly interval for signs of union (radiological & clinical), varus collapse (neck-shaft angle), limb shortening, and hardware failure.

Result

All patients showed signs of union at an average of 9 weeks (8–10 weeks), with minimum varus collapse (<10°), & no limb shortening and hardware failure. Results were analysed using IOWA (Larson) hip scoring. Average IOWA hip score was 77.5.

Conclusion

PF-LCP represents a feasible alternative for treatment of unstable inter- or subtrochanteric fractures.     

Treatment of distal tibial shaft fractures by three different surgical methods: a randomized,prospective study

Purpose

A few studies focused on the methods of treatment for displaced distal tibial shaft fractures have been published, all of which compared two different methods. In this randomized, prospective study, we aimed to compare minimally invasive plate osteosynthesis, locking intramedullary nail stabilization and external fixation combined with limited open reduction and absorbable internal fixation for distal tibial shaft fractures by assessing complications and secondary procedures.

Methods

From November 2002 to June 2012, 137 skeletally mature patients with displaced distal tibial shaft fractures with or without fibula fracture were randomized to be treated by minimally invasive plate osteosynthesis (group A, n = 46), locking intramedullary nail (group B, n = 46) or external fixation combined with limited open reduction and absorbable internal fixation (group C, n = 45). Age, gender, mechanism of injury, fracture pattern and presence of open fracture were equally distributed among the three groups. Indexes for evaluation included hospital stay, operative time, time to radiographic union, union status, infection and the incidence of re-operation. Mazur ankle score was introduced for functional evaluation. Statistics Analysis System (SAS) 9.2 was used for analysis.

Results

A total of 121 patients were included in the final analysis (group A 42, group B 40 and group C 39) and evaluated after a mean of 14.8 months follow-up. There was no significant difference (P > 0.05) in hospital stay, time to radiographic union and the incidence of union status among the three groups. Although group C was associated with less secondary procedures versus groups A and B, it was related with more pin tract infections (15.4 %). Anterior knee pain occurred frequently after locking intramedullary nailing (37.5 %) and the irritation symptoms were more frequently encountered in group A (59.5 %). There was no difference in ankle function between the three methods after operation (P > 0.05).

Conclusions

We consider that the minimally invasive plate osteosynthesis, locking intramedullary nail stabilization and external fixation combined with limited open reduction and absorbable internal fixation techniques are all efficient methods for treating distal tibia fractures. With its wide indications, external fixation combined with limited open reduction and absorbable internal fixation leads to minimal soft tissue complication, good functional result and no local soft tissue irritation or implant removal.