Optimized use of a biodegradable polymer as a carrier material for the local delivery of recombinant human bone morphogenetic protein-2 (rhBMP-2)

To improve the efficacy of a block copolymer of poly-d, l-lactic acid with randomly inserted p-dioxanone and polyethylene glycol (PLA-DX-PEG) as a drug delivery system for recombinant human bone morphogenetic proteins (rhBMPs), we examined the relationship between the volume of PLA-DX-PEG, the dose of rhBMP-2 and osteoinduction in a mouse model of ectopic bone formation. In a series of studies, we compared the size and bone mineral content (BMC) of ectopically induced bone by PLA-DX-PEG and collagen sponges carrying different quantities of rhBMP (0, 1, 2, 5, 10, 20 microg). An additional experiment was designed to investigate how a range of PLA-DX-PEG polymer volumes (15, 30, 60, 90 mg) with a fixed rhBMP concentration (0.01 wt%), altered the size and BMC of the induced ossicle. The influence of polymer volume was also examined in a further experiment wherein a fixed amount of rhBMP was placed in a range of PLA-DX-PEG copolymer volumes to give different concentrations of the protein per implant (0.02-0.0017 wt%). The results indicate that the bone yields were linearly dependent on the dose of rhBMP and also were proportional to the polymer volume above the minimal concentration of rhBMP-2 (0.0017 wt% in this series). The optimal concentration of rhBMP-2 in PLA-DX-PEG was 0.003 wt% in mice. The data provide important insights into the fabrication of implants that provide efficacious delivery of rhBMP-2 using the lowest possible dose of this expensive osteoinductive protein. This information will be of value for the clinical use of BMPs.     

A new bone-inducing biodegradable porous beta-tricalcium phosphate

A new type of degradable biomaterial with bone-inducing capacity was made by combining porous beta-tricalcium phosphate (beta-TCP) with a delivery system for recombinant human bone morphogenetic protein-2 (rhBMP-2). The BMP delivery system consisted of a block copolymer composed of poly-D,L-lactic acid with random insertion of p-dioxanone and polyethylene glycol (PLA-DX-PEG), a known biocompatible and biodegradable material. The efficacy of this biomaterial in terms of its bone-inducing capacity was examined by ectopic bone formation in the dorsal muscles of the mouse. In the beta-TCP implants coated with the PLA-DX-PEG polymer containing more than 0.0025% (w/w) of rhBMP-2, new ectopic bone tissues with marrow were consistently found on the surface of implants. The radiographic density of beta-TCP was diminished in a time-dependent manner. On histological examination, numerous multinucleated osteoclasts with positive tartrate-resistant acid-phosphatase (TRAP) staining were noted on the surface of the beta-TCP. These experimental results indicate that beta-TCP implants coated with synthetic rhBMP-2 delivery system might provide effective artificial bone-graft substitutes with osteoinductive capacity and biodegradable properties. In addition, this type of biomaterial may require less rhBMP-2 to induce significant new bone mass.     

Repair of an intercalated long bone defect with a synthetic biodegradable bone-inducing implant

Recombinant human bone morphogenetic protein (rhBMP)-2 in a block copolymer composed of poly-D,L-lactic acid with randomly inserted p-dioxanone and polyethylene glycol (PLA-DX-PEG) as a carrier and porous beta-tricalcium phosphate (beta-TCP) blocks were used to generate a new fully absorbable osteogenic biomaterial. The bone regenerability of the rhBMP-2/PLA-DX-PEG/beta-TCP composite was studied in a critical-sized rabbit bone defect model. In an initial study, a composite of PLA-DX-PEG (250 mg) and beta-TCP (300 mg) loaded with or without rhBMP2 (50 microg) was implanted into a 1.5 cm intercalated bone defect created in a rabbit femur. Defects were assessed by biweekly radiography until 8 weeks postoperatively. The bony union of the defect was recognized only in the BMP-loaded group. To obtain further data on biomechanical and remodeling properties, another BMP-loaded composites group was made and observed up to 24 weeks. All defects were completely repaired without residual traces of implants. Anatomical and mechanical properties of the repaired bone examined by histology, 3-dimensional CT (3D-CT) and mechanical testing were essentially equivalent to the nonoperated-on femur at 24 weeks. These experimental results indicate that fully absorbable rhBMP-2/PLA-DX-PEG/beta-TCP is a promising composite having osteogenicity efficient enough for repairing large bone defects.     

Comparative study of biphasic calcium phosphate ceramics impregnated with rhBMP-2 as bone substitutes

We investigated pellet-shaped implants prepared from biphasic calcium phosphate (BCP) ceramics with five different ratios of hydroxyapatite (HAP) to beta-tricalcium phosphate (beta-TCP) to evaluate these ceramics as bone substitutes. BCP ceramics impregnated with different doses of recombinant human bone morphogenetic protein 2 (rhBMP-2) (1, 5, and 10 microg) were used for experimental purposes and ceramics without rhBMP-2 were used for control. The pellets were implanted under the pericranium in adult Wistar male rats and were harvested 8 weeks after implantation. The retrieved pellets were then examined radiologically, histologically, and histomorphometrically. The results revealed that the pellets treated with rhBMP-2 exhibited new bone and bone marrow, whereas control pellets produced fibrous connective tissues. The formation of new bone induced by rhBMP-2 was dose dependent. The extent of bone and bone marrow formation and the degree of resorption of the ceramic particles were significantly higher in the pellets composed of 25% HAP-75% TCP. In this study, bioresorption of the ceramic produced favorable conditions for rhBMP-2-induced bone formation.     

Ectopic osteoinduction and early degradation of recombinant human bone morphogenetic protein-2-loaded porous beta-tricalcium phosphate in mice

The present study investigated the ectopic osteoinduction and early degradation of recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded porous beta-tricalcium phosphate (beta-TCP) in mice. The porous beta-TCP with 50 microg of rhBMP-2 (n = 25) and porous beta-TCP (control group, n = 25) were implanted into muscle pouches in the right and left thigh of 28-day-old mice (n = 25), respectively. At every time point (3, 7, 14, 21 and 28 days after implantation), five mice were euthanized and the histological examinations of implantation sites were performed. In addition, the alkaline phosphatase (ALP) activity was also quantitatively analyzed. For the rhBMP-2-loaded group, blood vessel formation and immature cartilage was observed within the porous beta-TCP 3 days after implantation. Mature cartilage was observed 7 days after implantation of rhBMP-2-loaded porous beta-TCP. Newly formed woven bone, lamellar bone as well as marrow were observed 14 and 21 days after implantation of the rhBMP-2-loaded porous beta-TCP. Lamellar bone and marrow were observed 28 days after implantation of the rhBMP-2-loaded porous beta-TCP. For the control group, no bone or cartilage was observed at all time points. However, multinucleated giant cells and fibrous tissues were observed in the control group at 7 and 28 days after implantation, respectively. At 21 and 28 days after implantation, porous beta-TCP was observed to fragment indicating early degradation of the porous beta-TCP in both groups. In addition, ALP was observed to be significantly higher in the rhBMP-2-loaded beta-TCP as compared to the control beta-TCP. It was concluded from this study that the rhBMP-2-loaded porous beta-TCP induced blood vessel and ectopic bone formation.     

Ectopic bone formation associated with recombinant human bone morphogenetic proteins-2 using absorbable collagen sponge and beta tricalcium phosphate as carriers

The ectopic bone formation of recombinant human bone morphogenetic protein-2(rhBMP-2) was evaluated using absorbable collagen sponges (ACS) and beta tricalcium phosphate (beta-TCP) as carriers in a rat subcutaneous assay model. Subcutaneous pockets were created on the back of rats. The pockets were implanted with rhBMP-2/ACS, rhBMP-2/beta-TCP, ACS alone, and beta-TCP alone. The rats were sacrificed at 2 or 8 weeks for histological and immunohistochemical evaluation. At 2 weeks, bone formation was evident in both the rhBMP-2/ACS and rhBMP-2/beta-TCP sites. At 8 weeks, the quantity of the new bone with a more advanced stage of remodeling had increased further in the rhBMP-2/beta-TCP sites. However, the newly formed bone observed at 2 weeks was not found in the rhBMP-2/ACS sites. On immunohistochemical observation, osteopontin staining was observed on both the rhBMP-2/ACS (2 weeks) and rhBMP-2/beta-TCP (2 and 8 weeks) sites. Osteocalcin was not detected in any of the samples. The lack of space-providing capacity of ACS may be one of the major factors responsible for its failure to maintain the newly induced bone. Therefore, a carrier for BMPs should provide space for bone formation and maturation during the more advanced healing stages.     

Repair of long intercalated rib defects in dogs using recombinant human bone morphogenetic protein-2 delivered by a synthetic polymer and beta-tricalcium phosphate

Long intercalated defects in canine ribs can be repaired successfully using porous beta-tricalcium phosphate (beta-TCP) cylinders, infused with a biodegradable polymer (poly D,L-lactic acid-polyethylene block copolymer) containing recombinant human bone morphogenetic protein-2 (rhBMP-2). We previously reported the successful regeneration of bony rib and periosteum defects using beta-TCP cylinders containing 400 microg of rhBMP-2. To reduce the amount of rhBMP-2 and decrease the time required for defect repair, we utilized a biodegradable polymer carrier, in combination with rhBMP-2 and the porous beta-TCP cylinders. An 8 cm long section of rib bone was removed and replaced with an implant comprised of the porous beta-TCP cylinders and the polymer containing 80 microg of rhBMP-2. Six weeks after surgical placement of the beta-TCP cylinder/polymer/BMP-2 implants, new rib bone with an anatomical configuration and mechanical strength similar to the original bone was regenerated at the defect site. The stiffness of the regenerated ribs at 3, 6, and 12 weeks after implantation of the composite implant was significantly higher than that of ribs regenerated by implantation of rhBMP-2/beta-TCP implants. Thus, addition of the synthetic polymer to the drug delivery system for BMP potentiated the bone-regenerating ability of the implant and enabled the formation of mechanically competent rib bone. This new method appears to be applicable to the repair of intercalated long bone defects often encountered in clinical practice.     

Repair of long intercalated rib defects using porous beta-tricalcium phosphate cylinders containing recombinant human bone morphogenetic protein-2 in dogs

A new method to repair rib defects with biomaterials containing recombinant human bone morphogenetic protein-2 (rhBMP-2) is presented in this report. We had reported previously the successful regeneration of bony rib defects by placing a short chain of small beta-tricalcium phosphate (beta-TCP) cylinders on the intact periosteum. The multi-cylinder implants were ineffective in promoting rib repair when the periosteum was absent. By adding rhBMP-2 to the beta-TCP cylinders, we were able to promote rib bone regeneration in the presence or absence of the periosteum. The osteogenic capacity of the rhBMP-2/beta-TCP composite implant and the time required to complete regeneration were evaluated in a canine model. An 8cm long section of rib bone, including the periosteum, was removed and replaced with a chain of the rhBMP-2/beta-TCP cylinders. At 6 weeks after implantation, the ribs were restored to their original configuration and mechanical strength. The multi-cylinder beta-TCP implants were degraded and replaced by new bone in 12 weeks. This new degradable bone-inducing implant material has significant clinical potential for rib repair.     

Potential of porous poly-D,L-lactide-co-glycolide particles as a carrier for recombinant human bone morphogenetic protein-2 during osteoinduction in vivo.

Several different biodegradable bone graft materials are in clinical or preclinical use for the repair of bone defects in orthopedics, maxillofacial surgery, and periodontics. This study tested the hypothesis that poly-D,L-lactide-co-glycolide copolymer (PLG) can be used as an effective carrier of recombinant human bone morphogenetic protein-2 (rhBMP-2) and that the composite has osteoinductive ability. Porous PLG rods were shredded to a particle size ranging from 250 to 850 microm. Active and inactive demineralized freeze-dried bone allografts (DFDBA) with a comparable particle size were used as positive and negative controls, respectively. PLG particles were treated with vehicle or with 5 or 20 microg rhBMP-2. DFDBA and PLG particles were placed in gelatin capsules, mixed with vehicle or rhBMP-2, and implanted at intramuscular sites in male Nu/Nu (nude) mice. Each mouse underwent bilateral implantation with implants of the same formulation, resulting in five groups of four mice per group: active DFDBA, inactive DFDBA, PLG, PLG + 5 microg rhBMP-2, and PLG + 20 microg rhBMP-2. After 56 days, the implants were recovered and processed for histology. Bone induction was assessed by use of a semiquantitative scoring system based on the amount of new bone formed in representative histological sections. Histomorphometry was also used to measure the area of new bone formed and the area of residual implant material. The results showed that active DFDBA induced the formation of ossicles containing new bone with bone marrowlike tissue, whereas inactive DFDBA or PLG particles alone did not induce new bone. The addition of rhBMP-2 to PLG particles resulted in new bone formation that had a greater bone induction score than active DFDBA. Moreover, the histomorphometric analysis showed that the addition of rhBMP-2 to PLG particles induced the formation of a greater area of new bone and bone marrowlike tissue than active DFDBA. The resorption of the PLG particles was markedly increased with the addition of rhBMP-2, suggesting that rhBMP-2 may attract and regulate resorptive cells at the implantation site. The results of the present study indicate that PLG copolymers are good carriers for BMP and promote the induction of new bone formation. Further, the PLG copolymers with rhBMP-2 had a greater effect in inducing new bone formation and resorbing the implanted material than active DFDBA alone.     

Intramuscular bone induction by the simultaneous administration of recombinant human bone morphogenetic protein 2 and bisphosphonate for autobone graft

An ideal substitute for bone graft is autobone tissue, of which there is an ample supply of the required form and with vascularity. Our strategy is to generate intramuscular autogenous bone by administering recombinant human bone morphogenetic protein 2 (rhBMP-2) with beta-tricalcium phosphate (beta-TCP) as a carrier, and to transplant this bone as a muscle-pedicled autograft. However, in a previous study (Jingushi et al., J. Orthop. Sci. 7, 490, 2002), bone resorption occurred early after bone induction. This study was conducted to determine whether rhBMP-2-induced bone tissue could be maintained by simultaneous administration of bisphosphonate, and to investigate whether the induced bone could be used for bone grafting. In this study, we first applied rhBMP-2 alone to a beta-TCP disk and inoculated it into rat quadriceps muscle. Bone area and the number of tartrate-resistant acid phosphatase (TRAP)-positive cells in the induced bone disk peaked at 2 weeks, and induced bone resorption occurred later. Bisphosphonate and rhBMP-2 were then simultaneously applied to a beta-TCP disk and inoculated as in the first experiment. The addition of bisphosphonate decreased the number of TRAP-positive cells and increased the bone area and compression strength at 4 weeks. In the last experiment, a rhBMP-2 applied beta-TCP disk treated with or without bisphosphonate was free-grafted to parietal bone 4 weeks after inoculation. Both bone disks united similarly. We concluded that the concurrent use of bisphosphonate prevented bone absorption attributed to osteoclast activity after bone induction by rhBMP-2. The bisphosphonate application did not disturb the union of induced bone to host bone.     

Local delivery of siRNA using a biodegradable polymer application to enhance BMP-induced bone formation

Small interfering RNA (siRNA) is useful tool for specific and efficient knockdown of disease-related genes. However, in vivo applications of siRNA are limited due to difficulty in its efficient delivery to target cells. In this study, we investigated the efficacy of a biodegradable hydrogel, poly-d,l-lactic acid-p-dioxanone-polyethylene glycol block co-polymer (PLA-DX-PEG), as a siRNA carrier. PLA-DX-PEG pellets with or without fluorescein-labeled dsRNA were implanted into mouse dosal muscle pouches. The cellular uptake of dsRNA surround the polymer was confirmed by fluorescent microscopy. The fluorescence intensity was dose-dependent of the dsRNA, and exhibited a time-dependent decrease. To investigate its biological efficiency, noggin (antagonoist to BMPs) gene-silencing with siRNA (siRNA/Noggin) was examined by the amount of suppression of BMP-2-induced noggin expression and the level of performance of BMP, indicated by ectopic bone formation. Noggin gene expression induced by BMP-2 was suppressed by addition of siRNA/Noggin to the implant, and the ectopic bone formation induced by implants with both BMP-2 and siRNA/Noggin was significantly greater than those induced by implants with BMP-2 alone. These results indicate the efficacy of local delivery of siRNAs by PLA-DX-PEG polymer, which intensified bone-inducing effects of BMP and promoted new bone formation by suppressing gene expression of Noggin.     

缓释型重组人骨形态发生蛋白2/壳聚糖生物骨修复材料诱导骨形成

背景：重组人骨形态发生蛋白2在体内半衰期短、易降解代谢,达不到理想的骨再生效果。 目的：制备缓释型重组人骨形态发生蛋白2/壳聚糖生物骨修复材料,并观察其缓释性能、骨诱导活性。 方法：将重组人骨形态发生蛋白2与壳聚糖混合制备壳聚糖膜,涂覆于生物骨修复材料表面,ELISA方法检测其体外释药性能。茜素红染色检测缓释型人骨形态发生蛋白2/壳聚糖生物骨材料、重组人骨形态发生蛋白2生物骨材料、单纯骨填充材料诱导C2C12细胞骨钙蛋白的形成,观察其诱导成骨细胞能力。同时将3种骨修复材料植入清洁级KM小鼠股部肌袋内,2周后检测新生骨Ca2+离子含量,评价其异位骨诱导能力。 结果与结论：材料表面的壳聚糖膜分布均匀,负载的重组人骨形态发生蛋白2呈团簇状。重组人骨形态发生蛋白2/壳聚糖生物骨修复材料体外释药存在突释,前4 d释放量达总药量的50%,持续至12 d,释药量达到90%,第18天时释放完全。与单纯骨填充材料、重组人骨形态发生蛋白2生物骨材料相比,缓释型人骨形态发生蛋白2/壳聚糖生物骨修复材料诱导C2C12细胞向成骨晚期分化能力与异位骨形成能力显著增强(P < 0.05)。结果提示缓释型人骨形态发生蛋白2/壳聚糖生物骨修复材料缓释性能好,促进骨形成能力强。     

Histological characterization of the early stages of bone morphogenetic protein-induced osteogenesis

On the basis of currently available knowledge, we hypothesize that the initial bone formation, as induced by bone morphogenetic protein (BMP), is influenced by the chemical composition and three-dimensional spatial configuration of the used carrier material. Therefore, in the current study, the osteoinductive properties of porous titanium (Ti) fiber mesh with a calcium phosphate (Ca-P) coating (Ti-CaP), insoluble bone matrix (IBM), fibrous glass membrane (FGM), and porous particles of hydroxy apatite (PPHAP) loaded with rhBMP-2 were compared in a rat ectopic assay model at short implantation periods. Twelve Ti-CaP, 12 IBM, 12 FGM, and 12 PPHAP implants, loaded with rhBMP-2, were subcutaneously placed in 16 Wistar King rats. The rats were sacrificed at 3, 5, 7, and 9 days post-operative, and the implants were retrieved. Histological analysis demonstrated that IBM and Ti-CaP had induced ectopic cartilage and bone formation by 5 and 7 days, respectively. However, in PPHAP, bone formation and cartilage formation were seen together at 7 days. At 9 days, in Ti-CaP, IBM, and PPHAP, cartilage was seen together with trabecular bone. At 9 days, in FGM, only cartilage was observed. Quantitative rating of the tissue response, using a scoring system, demonstrated that the observed differences were statistically significant (Wilcoxon rank sum test, p < 0.05). We conclude that IBM, CaP-coated Ti mesh, FGM, and PPHAP provided with rhBMP-2 can indeed induce ectopic bone formation with a cartilaginous phase in a rat model at short implantation periods. Considering the different chemical composition and three-dimensional spatial configuration of the carrier materials used, these findings even suggest that endochondral ossification is present in rhBMP-2-induced osteogenesis, even though the amount of cartilage may differ.     

The effect of a fibrin-fibronectin/beta-tricalcium phosphate/recombinant human bone morphogenetic protein-2 system on bone formation in rat calvarial defects

In spite of good prospects for bone morphogenetic proteins (BMP) applications, an ideal carrier system for BMPs has not yet been identified. The purpose of this study was to evaluate the osteogenic effect of a fibrin-fibronectin sealing system (FFSS) combined with beta-tricalcium phosphate (beta-TCP) as a carrier system for recombinant human bone morphogenetic proteins (rhBMP-2) in the rat calvarial defect model. Eight-millimeter critical-size calvarial defects were created in 100 male Sprague-Dawley rats. The animals were divided into five groups of 20 animals each. The defects were treated with rhBMP-2/FFSS, rhBMP-2/FFSS/beta-TCP, FFSS and FFSS/beta-TCP carrier control or were left untreated as a sham-surgery control. Defects were evaluated by histologic and histometric parameters following a 2- and 8-week healing interval (10 animals/group/healing intervals). The FFSS/beta-TCP carrier group was significantly greater in new bone area at 2 weeks (p<0.05) and new tissue area at 2 and 8 weeks (p<0.01) relative to the FFSS carrier group. New bone and new tissue area in the rhBMP-2/FFSS/beta-TCP group were significantly greater than in the rhBMP-2/FFSS group at 8 weeks (p<0.01). On histologic observation, FFSS remnants were observed at 2 weeks, but by 8 weeks, the FFSS appeared to be completely resorbed. rhBMP-2 combined with FFSS/beta-TCP produced significantly more new bone and new tissue formation in this calvarial defect model. In conclusion, FFSS/beta-TCP may be considered as an available carrier for rhBMP-2.     

Experimental studies on bone induction using low-molecular-weight poly (DL-lactide-co-glycolide) as a carrier for recombinant human bone morphogenetic protein-2

An appropriate carrier acting as a slow delivery vehicle for the BMPs is required for maximal clinical effectiveness of these bone-inductive proteins. The purpose of this study was to evaluate a low-molecular-weight PLGA copolymer as a synthetic, biodegradable carrier for rhBMP-2 implantation in vivo. Two, 10, or 50 microg of recombinant human BMP-2 were mixed with 10 mg of a poly (DL-lactide-co-glycolide) (PLGA) 50:50 copolymer and implanted into the calf muscles of Wistar rats. Soft X-ray analysis and histologic examination indicated that new bone formation occurred at all rhBMP-2-implanted sites within 3 weeks after implantation. Correlation of rhBMP-2 concentration with the amount of bone induction was confirmed by specific alkaline phosphatase activity and calcium content assay. In vitro analysis indicated that 78.5% of the PLGA copolymer was degraded to smaller molecular weight material after 14 days in PBS solution. It is suggested that rhBMP-2 was released in an active form at the implant site during the degradation of the copolymer, resulting in the induction of new bone formation. Thus this low-molecular-weight PLGA copolymer material represents a promising delivery vehicle for BMPs, and possibly other growth factors, around dental and orthopedic implants.     

重组人骨形态发生蛋白2-肝素-人工骨复合材料的骨诱导活性

背景：已有将重组人骨形态发生蛋白2应用于骨再生及修复的报道,但由于其在生物体内半衰期短而导致诱导骨形成的能力受到限制。 目的：制备具有较好缓释效果的重组人骨形态发生蛋白2-肝素-人工骨复合材料,并检测其缓释性能及骨诱导活性。 方法：通过高效液相色谱法检测重组人骨形态发生蛋白2-肝素复合物对于酶解的保护作用。将重组人骨形态发生蛋白2与肝素溶液混匀后复合于人工骨材料表面,ELISA方法检测其体外释药性质,茜素红染色法检测其诱导成骨细胞的能力,应用小鼠体内实验评价其异位骨诱导能力。 结果与结论：成功制备了具有良好缓释效果的重组人骨形态发生蛋白2-肝素-人工骨复合材料,具有较强的诱导骨钙蛋白及异位骨形成能力。     

Healing of segmental bone defects in rats induced by a beta-TCP-MCPM cement combined with rhBMP-2.

A beta-tricalcium phosphate-monocalcium phosphate monohydrate (beta-TCP-MCPM) cement was evaluated as an effective carrier of recombinant human bone morphogenetic protein-2 (rhBMP-2) in rat femoral critical-size defects. Hard cement cylinders (4 x 5 mm) impregnated with two different doses of rhBMP-2 (1.26 or 6.28 microg) were implanted into each defect, and the results were compared with those in rats that had implantations of cylinders only. Implantation of the 6.28 microg dose of rhBMP-2 caused a large bone shell to form around the defect, resulting in osseous union in all cases within 3 weeks. Except for beta-TCP granules, the cement was resorbed and replaced by bone tissue at 6 weeks. A torsion test at 9 weeks showed that the failure torque and bone stiffness had recovered 99% and 141%, respectively, compared with the intact contralateral femur. The defects that received 1.26 microg of rhBMP-2 resulted in 40% union and 41% of the failure torque at 9 weeks. However, no instances of union were observed in the defects implanted with cylinders only. In conclusion, the beta-TCP-MCPM cement was shown to be effective as a rhBMP-2 carrier. Combined with rhBMP-2, this cement was rapidly resorbed and completely healed the defects.     

重组人骨形态发生蛋白2/骨修复材料的制备与性能

BACKGROUND: It has become a hotspot to prepare the bone repair material that exhibits natural bone structure and is used in combination with biological factors. OBJECTIVE: To prepare the recombinant human bone morphogenetic protein-2 (rhBMP-2)/bone repair material, and to evaluate its capacities of release, activity and ectopic osteoinduction. METHODS: A collagen-binding domain was added to the N-terminal of native rhBMP-2 that allowed bind to collagens in the bone repair material. Then, rhBMP-2/bone repair material was obtained through freeze-dried method. The releasing ability of rhBMP-2 in vitro was assayed by ELISA. C2C12 cell lines were loaded to the composite material with 0.25, 0.5 and 1 µg rhBMP-2, respectively. Afterwards, alkaline phosphatase activity was detected at 72 hours. The composite materials with 0, 2, 5 and 10 µg rhBMP-2 were implanted into the quadriceps of Sprague-Dawley rats, respectively. Alkaline phosphatase activity and the newly formed bone were detected at 2 and 4 weeks after implantation. The CY-7-labeled composite material was implanted into the quadriceps of Sprague-Dawley rats to observe its stability. RESULTS AND CONCLUSION: Substantially no rhBMP-2 from the rhBMP-2/bone repair material was released within 45 days. The alkaline phosphatase activity of C2C12 was in a rise with the increased concentration of rhBMP-2. The stability of the composite material in vivo was better, the alkaline phosphatase activity and ectopic bone formation increased as the concentration of rhBMP-2 rose. To conclude, the rhBMP-2/bone repair material preserves the stability of rhBMP-2, and improves ectopic osteoinduction ability.     

Repair of a proximal femoral bone defect in dogs using a porous surfaced prosthesis in combination with recombinant BMP-2 and a synthetic polymer carrier

Total hip arthroplasty (THA) has become an almost standard procedure for the treatment of various hip lesions. However, one of the limitations has been the mechanical loosening of the prosthesis, a condition termed peri-prosthetic osteolysis. Consequently, at revision surgery, various grades of bone defect are often noted. Alternative approaches aimed at overcoming this problem have included a special design of the revision prosthesis and allo- or autogeneic bone grafting in combination with or without biomaterials. In a further attempt to address the loosening of the prosthesis, we have combined human bone morphogenetic protein-2, produced by DNA recombination (rhBMP-2) with a new synthetic biodegradable polymer (poly-D,L-lactic-acid-para-dioxanone-polyethyleneglycol block co-polymer; PLA-DX-PEG). We present data on the efficacy of the rhBMP-2 laden prosthesis to reconstruct a bone defect in a canine model. In this model, medial half of the proximal femur was surgically resected to create a bone defect that was repaired with the rhBMP-2/PLA-DX-PEG composite. Twelve weeks after implantation, the original bone defects in the rhBMP-2 treatment groups had been repaired. Thus, this type of 'hybrid' prosthesis may provide a new modality to repair bone defects or restore lost bone mass encountered in revision arthroplasty.     

Mandibular bone repair by implantation of rhBMP-2 in a slow release carrier of polylactic acid--an experimental study in rats

The aim of the present study was to test the hypothesis that human recombinant bone morphogenic protein 2 (rhBMP-2) implanted in a slow release carrier of polylactic acid (PLA) can repair a non-healing defect in the rat mandible and maintain the thickness of an augmented volume. p-DL-lactic acid discs were produced and loaded with 48 and 96 microg rhBMP-2 and inserted into non-healing defects of the mandible of 45 Wistar rats. Fifteen rats received implants with 96 microg rhBMP-2 (Group 2), 48 microg rhBMP-2 (Group 1) and blank implants without BMP (Group 0) each on one side of the mandible. Unfilled defects of the same size on the contralateral sides of the mandibles served as empty controls. After 6, 13 and 26 weeks, implants of each group were retrieved from five animals each and submitted to flat panel detector computed tomography. Bone formation and thickness of augmentation was assessed by computer-assisted histomorphometry. In Group 2 significantly more bone was produced than in Group 1. Implants of Group 1 induced significantly more bone than the blank controls only after 6 weeks, whereas the difference was not significant after 13 and 26 weeks. Differences between Group 2 and Group 1 were clearly significant after 26 weeks. The thickness of bone tissue was maintained in Group 2 whereas it decreased in Group 1 and was negligible in Group 0. It is concluded that the PLA implants with 96 microg rhBMP-2 were able to bridge a non-healing defect in the rat mandible and maintained the thickness of an augmented volume. However, continuous supply of osteogenic signals appears to be required to compensate for adverse effects during polymer degradation.