Solid Lipid Nanoparticles (SLN) and Oil-Loaded SLN Studied by Spectrofluorometry and Raman Spectroscopy

Purpose Recently, colloidal dispersions made of mixtures from solid and liquid lipids have been described to overcome the poor drug loading capacity of solid lipid nanoparticles (SLN). It has been proposed that these nanostructured lipid carriers (NLC) are composed of oily droplets, which are embedded in a solid lipid matrix. High loading capacities and controlled release characteristics have been claimed. It is the objective of the present paper to investigate these new NLC particles in more detail to obtain insights into their structure. Methods Colloidal lipid dispersions were produced by high-pressure homogenization. Particle sizes were estimated by laser diffraction and photon correlation spectroscopy. The hydrophobic fluorescent marker nile red (NR) was used as model drug, and by fluorometric spectroscopy, the molecular environment (polarity) was elucidated because of solvatochromism of NR. The packaging of the lipid nanoparticles was investigated by Raman spectroscopy and by densimetry. The light propagation in lipid nanodispersions was examined by refractometry to obtain further insights into the nanostructural compositions of the carriers. Results Fluorometric spectroscopy clearly demonstrates that NLC nanoparticles offer two nanocompartments of different polarity to accommodate NR. Nevertheless, in both compartments, NR experiences less protection from the outer water phase than in a nanoemulsion. In conventional SLN, lipid crystallization leads to the expulsion of the lipophilic NR from the solid lipid. Measurements performed by densimetry and Raman spectroscopy confirm the idea of intact glyceryl behenate lattices in spite of oil loading. The lipid crystals are not disturbed in their structure as it could be suggested in case of oil incorporation. Refractometric data reveal the idea of light protection because of incorporation of sensitive drug molecules in NLC. Conclusion Neither SLN nor NLC lipid nanoparticles did show any advantage with respect to incorporation rate compared to conventional nanoemulsions. The experimental data let us conclude that NLC lipid nanoparticles are not spherical solid lipid particles with embedded liquid droplets, but they are rather solid platelets with oil present between the solid platelet and the surfactant layer.     

Nanostructured lipid carriers (NLCs) versus solid lipid nanoparticles (SLNs) for topical delivery of meloxicam

Abstract

Objective: The aim of this study was to develop nanostructured lipid carriers (NLCs) as well as solid lipid nanoparticles (SLNs) and evaluate their potential in the topical delivery of meloxicam (MLX).

Materials and methods: The effect of various compositional variations on their physicochemical properties was investigated. Furthermore, MLX-loaded lipid nanoparticles-based hydrogels were formulated and the gels were evaluated as vehicles for topical application.

Results and discussion: The results showed that NLC and SLN dispersions had spherical shapes with an average size between 215 and 430?nm. High entrapment efficiency was obtained ranging from 61.94 to 90.38% with negatively charged zeta potential in the range of ?19.1 to ?25.7?mV. The release profiles of all formulations exhibited sustained release characteristics over 48?h and the release rates increased as the amount of liquid lipid in lipid core increased. Finally, Precirol NLC with 50% Miglyol® 812 and its corresponding SLN were incorporated in hydrogels. The gels showed adequate pH, non-Newtonian flow with shear-thinning behavior and controlled release profiles. The biological evaluation revealed that MLX-loaded NLC gel showed more pronounced effect compared to MLX-loaded SLN gel.

Conclusion: It can be concluded that lipid nanoparticles represent promising particulate carriers for topical application.     

Cytotoxicity of Solid Lipid Nanoparticles as a Function of the Lipid Matrix and the Surfactant

Purpose. Assessment of the in vitro cytotoxicity of solid lipid nanoparticles (SLNs) as a function of lipid matrix (Dynasan 114, Compritol ATO 888), and stabilizing surfactant (poloxamers, Tween 80, soya lecithin, and sodium dodecyl sulphate). Comparison with other colloidal carriers should determine their potential use in the clinic. Methods. SLNs were produced by high pressure homogenisation. Cytotoxicity was assessed by measuring the viability of HL60 cells and human granulocytes after incubation with SLNs. Particle internalisation was quantified by chemiluminescence measurements. Results. The nature of the lipid had no effect on viability; distinct differences were found for the surfactants. Binding to the SLN surface reduced markedly the cytotoxic effect of the surfactants, e.g., up to a factor of 65 for poloxamer 184. The permanent HL60 cell line— differentiated from cells with granulocyte characteristics by retinoic acid treatment—yielded results identical to freshly isolated human granulocytes. In general, the SLNs showed a lower cytotoxicity compared to polyalkylcyanoacrylate and polylactic/glycolic acid (PLA/ GA) nanoparticles. Conclusions. Because the results are identical when using human granulocytes, differentiated HL60 cells can be used as an easily accessible in vitro test system for i.v. injectable SLN formulations. The SLNs appear suitable as a drug carrier system for potential intravenous use due to their very low cytotoxicityin vitro.     

Structural investigations on nanoemulsions, solid lipid nanoparticles and nanostructured lipid carriers by cryo-field emission scanning electron microscopy and Raman spectroscopy

Recently, colloidal dispersions based on solid lipids (solid lipid nanoparticles, SLN) and mixtures of solid and liquid lipids (nanostructured lipid carriers, NLC) were described as innovative carrier systems. A spherical particle shape is the basis of features such as a high loading capacity and controlled drug release characteristics due to smaller lipid-water interfaces and longer diffusion pathways when compared to thin platelets. The structures of SLN and the influence of oil load (NLC) on particle properties were investigated by photon correlation spectroscopy (PCS), laser diffractometry (LD), cryo-field emission scanning electron microscopy (cryo-FESEM), Raman spectroscopy and infrared spectroscopy (IR), and compared to a conventional nanoemulsion. PCS and LD data show similar size and size distribution for SLN and NLC (approximately 210 nm, polydispersity index approximately 0.15) and suggested a long term physical stability for the dispersions which had been stored for up to 12 months at different temperatures. Using cryo-FESEM droplets (for the nanoemulsion) and almost spherical particles for SLN and NLC were observed. Raman spectroscopy resulted in spectra for NLC that are weighted to the SLN spectra, suggesting an undisturbed crystal structure. Infrared spectra of the NLC are predominantly SLN in nature. Importantly the SLN bands are unshifted in the NLC spectrum indicating that the crystalline structure is unaffected by the presence of the oil.     

Solid Lipid Nanoparticles in Lymph and Plasma After Duodenal Administration to Rats

Purpose. To evaluate the uptake and transport of solid lipid nanoparticles (SLN), which have been proposed as alternative drug carriers, into the lymph and blood after duodenal administration in rats. Methods. Single doses of two different concentrations of aqueous dispersions of unlabelled and labelled SLN (average diameter 80 nm) were administered intraduodenally to rats. At different times, samples of lymph were withdrawn by cannulating the thoracic duct and blood was sampled from the jugular vein. Monitoring continued for 45 and 180 minutes, for unlabelled and labelled SLN respectively. The biological samples were analysed by photon correlation spectroscopy (PCS), transmission electron microscopy (TEM) and gamma-counting. Results. TEM analysis evidenced SLN in lymph and blood after duodenal administration to rats; the size of SLN in lymph did not change markedly compared to that before administration. The labelled SLN confirmed the presence of SLN in lymph and blood. Conclusions. The uptake and transport of SLN in the lymph, and to a lesser extent in the blood, were evidenced. The in vivo physical stability of SLN may have important implications in designing drug-carrying SLN.     

Development of topotecan loaded lipid nanoparticles for chemical stabilization and prolonged release

Topotecan is an important cytotoxic drug that has gained broad acceptance in clinical use for the treatment of refractory ovarian and small-cell lung cancer. The lactone active form of topotecan can be hydrolyzed in vivo, decreasing the drug’s therapeutic efficacy. Lipid encapsulation may promote in vivo stabilization by removing topotecan from aqueous media. Earlier reports of topotecan lipid nanoencapsulation have focused on liposomal encapsulation; however, the higher stability and cost-effectiveness of solid lipid nanoparticles (SLN) highlight the potential of these nanoparticles as an advantageous carrier for topotecan. The initial motivation for this work was to develop, for the first time, solid lipid nanoparticles and nanostructured lipid carriers (NLC) with a high drug loading for topotecan. A microemulsion technique was employed to prepare SLNs and NLCs and produced homogeneous, small size, negatively charged lipid nanoparticles with high entrapment efficiency and satisfactory drug loading. However, low recovery of topotecan was observed when the microemulsion temperature was high and in order to obtain high quality nanoparticles, and precise control of the microemulsion temperature is critical. Nanoencapsulation sustained topotecan release and improved its chemical stability and cytotoxicity. Surprisingly, there were no significant differences between the NLCs and SLNs, and both are potential carriers for topotecan delivery.     

Lipid nanoparticles for chemotherapeutic applications: strategies to improve anticancer efficacy

Introduction: Chemotherapy remains the major form of treatment for cancer. However, chemotherapy often fails due to a variety of barriers, resulting in a limited intratumoral drug disposition. Recently, lipid nanoparticles (LNs, i.e., solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs)) have been shown to provide a favorable means for efficiently delivering drugs to tumor sites, while minimizing their side effects.

Areas covered: The delivery of drugs to tumors is restricted by a series of barriers, including the tumor abnormalities, strong adverse effects and poor specificity of cytotoxic drugs, and the induction of multidrug resistance (MDR). The present review summarizes the strategies using SLNs and/or NLCs to improve the anticancer efficacy of cytotoxic drugs, including passive targeting, active targeting, long circulating and MDR reversing. Specifically, the most significant in vitro and in vivo results on the use of SLNs and/or NLCs are highlighted.

Expert opinion: The future success of SLNs and NLCs for administration of cytotoxic drugs will depend on their ability to efficiently encapsulate and release drugs, the possibility for large-scale production, selective tumor cells targeting and increased antitumor efficacy with reduced tissue toxicity.     

Incorporation of the Model Drug Ubidecarenone into Solid Lipid Nanoparticles

Purpose. The impact of drug incorporation on melt-homogenized tripalmitin nanoparticles is investigated with ubidecarenone as a model drug. The dispersions are studied with respect to their drug loading capacity, localization and physical state of the drug as well as to potential changes of the nanoparticle properties due to interactions between drug and triglyceride matrix. Methods. The investigations were carried out using photon correlation spectroscopy, differential scanning calorimetry, synchrotron radiation X-ray diffraction, ultracentrifugation, and cryo- and freeze-fracture transmission electron microscopy. Results. Ubidecarenone can be incorporated into the dispersions in concentrations higher than 50% of the dispersed phase. The drug is associated with the nanoparticles such that small drug amounts are bound tightly to the carrier matrix while excess drug adheres as a liquid phase to the crystalline particles. Drug incorporation lowers the crystallization and melting temperature of the particle matrix and accelerates the transition of the triglyceride into the stable -polymorph after crystallization. Conclusions. Drug incorporation may significantly alter important physicochemical parameters of solid lipid nanoparticles. Slow release of ubidecarenone may only be possible for the fraction of drug which is tightly bound to the matrix while the liquid fraction should be rapidly released.     

纳米结构脂质载体的制备及性质研究进展

纳米结构脂质载体(nanostructured lipid carrier,NLC)是在固体脂质纳米粒基础上发展的脂质纳米粒,它由固体脂质和液态脂质混合制备而得。综述了NLC的制备方法、粒径形态、载药能力、晶型结构、稳定性及应用的研究进展。     

Body Distribution of Camptothecin Solid Lipid Nanoparticles After Oral Administration

Purpose. The aim of this study was to investigate the specific changes in body distribution of camptothecin (CA) through incorporation into solid lipid nanoparticles (SLN) by peroral route. Methods. Camptothecin loaded solid lipid nanoparticles (CA-SLN) coated with poloxamer 188 were produced by high pressure homogenization. The CA-SLN were characterized by transmission electron microscopy and electrophoretic mobility measurement. In vitro release characteristics of camptothecin from CA-SLN were studied at different pH media. The concentration of camptothecin in organs was determined using reversed-phase high-performance liquid chromatography with a fluorescence detector after oral administration of CA-SLN and a camptothecin control solution (CA-SOL). Results. Our results showed that CA-SLN had an average diameter 196.8 nm with Zeta potential of –69.3 mV. The encapsulation efficiency of camptothecin was 99.6%, and in vitro drug release was achieved up to a week. There were two peaks in the camptothecin concentration-time curves in plasma and tested organs after oral administration of CA-SLN. The first peak was the result of free drug and the second peak was indicative of gut uptake of CA-SLN after 3 hours. In tested organs, the area under curve (AUC) and mean residence time (MRT) of CA-SLN increased significantly as compared with CA-SOL, and the increase of brain AUC was the highest among all tested organs. Conclusions. The results indicate SLN could be a promising sustained release and targeting system for camptothecin or other lipophilic antitumor drugs after oral administration.     

Lipid nanoparticles as carrier for octyl-methoxycinnamate: in vitro percutaneous absorption and photostability studies

The aim of the present study was the evaluation of lipid nanoparticles (solid lipid nanoparticles, SLN, and nanostructured lipid carriers, NLC) as potential carriers for octyl-methoxycinnamate (OMC). The release pattern of OMC from SLN and NLC was evaluated in vitro, determining its percutaneous absorption through excised human skin. Additional in vitro studies were performed in order to evaluate, after UVA radiation treatment, the spectral stability of OMC-loaded lipid nanoparticles. From the obtained results, ultrasonication method yielded both SLN and NLC in the nanometer range with a high active loading and a particle shape close to spherical. Differential scanning calorimetry data pointed out the key role of the inner oil phase of NLC in stabilizing the particle architecture and in increasing the solubility of OMC as compared with SLN. In vitro results showed that OMC, when incorporated in viscosized NLC dispersions (OMC-NLC), exhibited a lower flux with respect to viscosized SLN dispersions (OMC-SLN) and two reference formulations: a microemulsion (OMC-ME) and a hydroalcoholic gel (OMC-GEL). Photostability studies revealed that viscosized NLC dispersions were the most efficient at preserving OMC from ultraviolet-mediated photodegradation.     

Nanostructured lipid carrier versus solid lipid nanoparticles of simvastatin: comparative analysis of characteristics, pharmacokinetics and tissue uptake

Nanostructured lipid carrier (NLC) system of simvastatin was investigated for improvement in release, pharmacokinetics and biodistribution over its solid lipid nanoparticles (SLN). The NLC formulations prepared by solvent injection technique were optimized by 2(3) full factorial design. Optimized NLC was deduced on the basis of dependent variables that were analyzed using Design expert 8.0.2 software (Stat Ease, Inc., USA). Pareto charts and response surface plots were utilized to study the effect of variables on the response parameters. The optimized NLC was a suspension of nanosized homogeneous particles with significantly higher entrapment efficiency (>90%) and lower recrystallization properties (p<0.01) than SLNs. The pharmacokinetic parameters of Tc(99) labeled optimized NLC in mice, obtained using Quickcal software (Plexus, India) revealed 4.8 folds increase in bioavailability as compared to simvastatin suspension and 2.29 folds as compared to SLNs. Biodistribution study revealed preferential accumulation of NLC in the liver and this is advantageous because liver is the target organ for simvastatin. IVIVC studies demonstrated level A correlation between in vitro release and percent drug absorbed. This investigation demonstrated the superiority of NLC over SLN for improved oral delivery and it was deduced that the liquid lipid, oleic acid was the principal formulation factor responsible for the improvement in characteristics, pharmacokinetics and biodistribution of NLCs.     

Lipid nanoparticles with different oil/fatty ester ratios as carriers of buprenorphine and its prodrugs for injection

Buprenorphine is a promising drug for the treatment of chronic pain and opioid dependence. The aim of the present work was to evaluate the feasibility of lipid nanoparticles with different oil/fatty ester ratios for injection of buprenorphine. To improve the release properties and analgesic duration of the drug, ester prodrugs were also incorporated into the nanoparticles for evaluation. Linseed oil and cetyl palmitate were respectively chosen as the liquid lipid and solid lipid in the inner phase of the nanoparticulate systems. Differential scanning calorimetry (DSC) was performed, and the particle size, zeta potential, molecular environment, and lipid/water partitioning were determined to characterize the state of the drug/prodrug and lipid modification. The in vitro release kinetics were measured by a Franz assembly. DSC showed that systems without oil (solid lipid nanoparticles, SLNs) had a more ordered crystalline lattice in the inner matrix compared to those with oil (nanostructured lipid carriers, NLCs and lipid emulsion, LE). The mean diameter of the nanoparticles ranged between 180 and 200 nm. The in vitro drug/prodrug release occurred in a delayed manner in decreasing order as follows: SLN > NLC > LE. It was found that the release rate was reduced following an increase in alkyl ester chains in the prodrugs. The in vivo antinociception was examined by a cold ethanol tail-flick test in rats. Compared to an aqueous solution, a prolonged analgesic duration was detected after an intravenous injection of buprenorphine-loaded SLNs and buprenorphine propionate (Bu-C3)-loaded NLCs (with 10% linseed oil in the lipid phase). The Bu-C3 in NLCs even showed a maximum antinociceptive activity for 10 h. In vitro erythrocyte hemolysis and lactate dehydrogenase (LDH) release from neutrophils demonstrated a negligible toxicity of these carriers. Our results indicate the feasibility of using lipid nanoparticles, especially SLNs and NLCs, as parenteral delivery systems for buprenorphine and its prodrugs.     

Intranasal delivery of nanostructured lipid carriers,solid lipid nanoparticles and nanoemulsions: A current overview of in vivo studies

The management of the central nervous system (CNS) disorders is challenging, due to the need of drugs to cross the blood‒brain barrier (BBB) and reach the brain. Among the various strategies that have been studied to circumvent this challenge, the use of the intranasal route to transport drugs from the nose directly to the brain has been showing promising results. In addition, the encapsulation of the drugs in lipid-based nanocarriers, such as solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs) or nanoemulsions (NEs), can improve nose-to-brain transport by increasing the bioavailability and site-specific delivery. This review provides the state-of-the-art of in vivo studies with lipid-based nanocarriers (SLNs, NLCs and NEs) for nose-to-brain delivery. Based on the literature available from the past two years, we present an insight into the different mechanisms that drugs can follow to reach the brain after intranasal administration. The results of pharmacokinetic and pharmacodynamics studies are reported and a critical analysis of the differences between the anatomy of the nasal cavity of the different animal species used in in vivo studies is carried out. Although the exact mechanism of drug transport from the nose to the brain is not fully understood and its effectiveness in humans is unclear, it appears that the intranasal route together with the use of NLCs, SLNs or NEs is advantageous for targeting drugs to the brain. These systems have been shown to be more effective for nose-to-brain delivery than other routes or formulations with non-encapsulated drugs, so they are expected to be approved by regulatory authorities in the coming years.KEY WORDS: Nose-to-brain delivery, Intranasal administration, Nanostructured lipid carriers, NLC, Solid lipid nanoparticles, SLN, Nanoemulsions, In vivo studies, Pharmacokinetic, Pharmacodynamics     

Polymorphic behaviour of Compritol®888 ATO as bulk lipid and as SLN and NLC

Compritol®888 ATO (glycerol behenate) is widely used as a pharmaceutical excipient in the field of solid dosage forms due to its lubricating properties. It is an amphiphilic material with a high melting point (～70°C) and, therefore, it can also be used to prepare aqueous colloidal dispersions. The aim of this paper is to study the suitability of Compritol®888 ATO for the production of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for the entrapment of a lipophilic model drug. This study assesses the crystalline structure of the bulk lipid, as well as the changes that occur in its crystal lattice with the addition of ‘impurities’, such as oil (α-tocopherol) and drug (ketoconazole), using DSC and X-ray diffraction analysis before and after thermal stress. Aqueous SLN and NLC dispersions were produced using an appropriate surfactant/co-surfactant system and their physicochemical stability was assessed by PCS, LD, DSC and by WAXS. It was found that the crystalline lattice of Compritol®888 ATO is composed of very small amounts of the unstable α polymorphic form characteristic of triacylglycerols, which disappears after thermal stress of bulk lipid. Mixing oils and drug molecules which are soluble in this lipid decreased its lattice organization and, thus, was revealed to be suitable for production of lipid nanoparticles containing ketoconazole. However, particle growth could not be avoided during shelf life.     

Influence of the Formulation for Solid Lipid Nanoparticles Prepared with a Membrane Contactor

Solid lipid nanoparticles (SLN) were introduced in the 1990s as an alternative to microemulsions, polymeric nanoparticles, and liposomes. The SLN are reported to have several advantages, i.e., their biocompatibility and their controlled and targeted drug release. In this paper, we present a new process for the preparation of SLN using a membrane contactor to allow large scale production. The lipid phase is pressed, at a temperature above the melting point of the lipid, through the membrane pores allowing the formation of small droplets. The lipid droplets are then detached from the membrane pores by the aqueous phase flowing tangentially to the membrane surface. The SLN are formed by the following cooling of the preparation below the lipid melting point. The influence of the aqueous phase and lipid phase formulations on the lipid phase flux and on the SLN size are studied. It is shown that SLN are obtained with a lipid phase flux between 0.21 and 0.27 m^3/h.m², SLN size between 175 and 260 nm. The advantages of this new process are demonstrated to be its facility of use and its scaling-up ability.     

Hydrophobic ion pairing as a strategy to improve drug encapsulation into lipid nanocarriers for the cancer treatment

Introduction: Incorporation of anticancer drugs with low lipophilicity in lipid nanocarriers is usually low, which limits the utilization of this strategy in cancer therapy. However, the complexation of these drugs with lipophilic ion pairs containing ionizable groups has been reported to improve their incorporation in nanocarriers such as solid lipid nanoparticles (SLNs), nanostructured lipid nanocarriers (NLCs), and nanoemulsions (NEs). Therefore, those nanocarriers have shown an increase in efficacy and lower toxicity compared with the free drugs, particularly if the counter ion utilized has anticancer activity.

Areas covered: This review covers, from 1999 to the present, the utilization of the hydrophobic ion pair (HIP) approach to enhance the encapsulation of anticancer drugs in lipid nanostructured delivery systems, SLN, NLC, and NE; the benefits achieved; and challenges to improve the anticancer therapy.

Expert opinion: The HIP strategy has consistently demonstrated enhancement of the encapsulation efficiency in NLCs associated with increased anticancer activity of drugs such as doxorubicin, all-trans retinoic acid, methotrexate, vincristine and others. From this point on, conducting further physicochemical characterization studies of the formed ion pair as well as proceeding with the in vivo efficacy, toxicity and pharmacokinetics studies are expected.     

Atomic Force Microscopy Studies of Solid Lipid Nanoparticles

Purpose. Solid Lipid Nanoparticles (SLN) are an alternative carrier system for the controlled delivery of drugs. In most cases prednisolone loaded SLN show a biphasic release behaviour. The initial phase is characterised by a fast drug release, which is followed by a sustained drug release over several weeks. Methods. The particles are produced by high pressure homogenisation of a lipid (e.g. compritol, cholesterol) dispersed in an aqueous surfactant solution. In this study atomic force microscopy was used to image the original unaltered shape and surface properties of the particles. The crystallinity of the nanoparticles was investigated by differential scanning calorimetry. Results. The AFM investigations revealed the disc like shape of the particles. From differential scanning calorimetry data it can be concluded that the particle core is in the crystalline state. Additionally it was proven that the particles are surrounded by a soft layer. Conclusions. Thus it is conceivable that the fast initial drug release during in vitro dissolution tests takes place by drug release of the outer non-crystalline layers of the particles. The following sustained drug release can be assigned to the predisolone release of the inner crystalline particle layers.     

Solid lipid nanoparticles and nanostructured lipid carriers--innovative generations of solid lipid carriers

The first generation of solid lipid carrier systems in nanometer range, Solid Lipid Nanoparticles (SLN), was introduced as an alternative to liposomes. SLN are aqueous colloidal dispersions, the matrix of which comprises of solid biodegradable lipids. SLN are manufactured by techniques like high pressure homogenization, solvent diffusion method etc. They exhibit major advantages such as modulated release, improved bioavailability, protection of chemically labile molecules like retinol, peptides from degradation, cost effective excipients, improved drug incorporation and wide application spectrum. However there are certain limitations associated with SLN, like limited drug loading capacity and drug expulsion during storage, which can be minimized by the next generation of solid lipids, Nanostructured lipid carriers (NLC). NLC are lipid particles with a controlled nanostructure that improves drug loading and firmly incorporates the drug during storage. Owing to their properties and advantages, SLN and NLC may find extensive application in topical drug delivery, oral and parenteral administration of cosmetic and pharmaceutical actives. Cosmeceuticals is emerging as the biggest application target of these carriers. Carrier systems like SLN and NLC were developed with a perspective to meet industrial needs like scale up, qualification and validation, simple technology, low cost etc. This paper reviews present status of SLN and NLC as carrier systems with special emphasis on their application in Cosmeceuticals; it also gives an overview about various manufacturing techniques of SLN and NLC.     

蓝萼甲素固体脂质纳米粒的制备及理化性质研究

目的:制备蓝萼甲素固体脂质纳米粒,并对其理化性质进行研究。方法:用乳化-溶剂挥发法制得蓝萼甲素固体脂质纳米粒,并对其粒径、形态、表面电位、包封率、体外释药性质等进行研究。结果:所得蓝萼甲素固体脂质纳米粒的粒径分布均匀,平均粒径为(190±10·3)nm,Zeta电位为—31·2mV,平均包封率为(50·45±0·804)%;药物体外释放符合Higuchi线性方程,具有显著缓释作用。结论:固体脂质纳米粒可作为蓝萼甲素新型缓释给药系统。