共查询到20条相似文献，搜索用时 31 毫秒
1.
Ben Studebaker Lars Hollender Lloyd Mancl James D. Johnson Avina Paranjpe 《Journal of endodontics》2018,44(4):565-570
Introduction
Many endodontic treatment failures in maxillary molars result from missed second mesiobuccal (MB2) canals. An MB2 canal orifice is present in as many as 95% of maxillary molars, but these canals are not always located during endodontic procedures. Additional tools, such as cone-beam computed tomographic (CBCT) imaging, may be needed to locate these canals in maxillary molars. Hence, the aims of this study were to investigate the frequency of use of CBCT imaging during the treatment of maxillary molars and to evaluate the influence of its use on the detection of MB2 canals.Methods
Endodontic treatment records, digital intraoral radiographs (when present), and CBCT images from all maxillary first and second?molars treated at the University of Washington, Seattle, WA, between 2010 and 2014 (N?=?886) were reviewed. Statistical analysis was performed to assess differences between the groups.Results
Overall, an MB2 canal was found in 55.8% of the maxillary molars studied, and CBCT imaging assisted in detecting 11.7% of these canals. CBCT imaging was used in 16.5% of the cases treated and was used significantly more for retreatment cases. CBCT imaging was used preoperatively in 5.6% of cases, and the data show that significantly more MB2 canals were located when a preoperative CBCT image was available. More MB2 canals were located in first molars without full-coverage crowns.Conclusions
The data show that CBCT imaging is a valuable tool in locating MB2 canals. Based on the results of his study, the use of CBCT imaging could be warranted when treating maxillary molars. 相似文献2.
Brent M. Hiebert Kenneth Abramovitch Dwight Rice Mahmoud Torabinejad 《Journal of endodontics》2017,43(10):1711-1715
Introduction
The purpose of this study was to determine the prevalence of the second mesiobuccal canal (MB2) in 100 maxillary first molars using 3 independent methods and a combination method.Methods
One hundred extracted human maxillary first molars were collected. The teeth were mounted in the maxillary first molar extraction sockets of a human cadaver head. A cone-beam computed tomographic (CBCT) scan was taken of each tooth. Two radiology faculty independently evaluated the CBCT volume for the presence of an MB2 canal. Additionally, teeth were accessed. If a canal was not found, a preoperative CBCT scan was viewed followed by a second attempt to locate an MB2 canal. Lastly, the mesiobuccal root was dissected by grinding in a coronal plane.Results
A review of CBCT volumes found the presence of an MB2 canal 69% of the time. Accessing the tooth led to an MB2 detection of 78%. When a CBCT scan was viewed, this brought the access detection rate up to 87%. Coronal plane root grinding had an MB2 canal detection rate of 92%. Differences between each method were statistically significant.Conclusions
The results of this study show that an MB2 canal is present up to 92% of the time. Direct access of teeth found statistically significant more MB2 canals than viewing CBCT volumes alone (P = .032). Therefore, exposing every patient to a preoperative CBCT scan may not be appropriate. However, taking a CBCT scan when an MB2 canal is not found clinically can significantly increase the chances of finding an MB2 canal (P < .001). 相似文献3.
Jorge N.R. Martins Yongchun Gu Duarte Marques Helena Francisco João Caramês 《Journal of endodontics》2018,44(7):1096-1104
Introduction
Populations from different geographic regions and ethnic backgrounds may present differences in dental morphology. The aim of this study was to compare the differences in root and root canal configurations on Asian and white subpopulations using cone-beam computed tomographic imaging.Methods
Information from Asian and white patients was retrieved from 2 cone-beam computed tomographic imaging databases in China and Western Europe. Two calibrated observers collected data regarding the number of roots and Vertucci root canal system configuration for all groups of teeth. A total of 15,655 teeth were analyzed. The z test for independent groups was used to analyze differences between the groups. The significance level was considered at a P value < .05. Reliability tests were performed between observers.Results
Differences were noted in the number of roots per tooth in 6 groups of teeth. The Asian group showed a higher prevalence of single-root configurations in maxillary first premolars (83.2%) and mandibular second molars (45.4%) when compared with whites with 48.7% and 14.3%, respectively. Moreover, 3-rooted configurations in mandibular first molars were more common in Asians (25.9%) compared with whites (2.6%). Seventeen of the 20 analyzed roots had a higher prevalence of Vertucci type I configuration in Asians. Maxillary first molars with second mesiobuccal root canals were more commonly found in whites than in Asians (71.3% and 58.4%, respectively). A similar situation was found in maxillary second molars.Conclusions
The Asian ethnic group presented a higher prevalence of Vertucci type I configuration, whereas the white group displayed a higher number of multiple root canal system morphologies. A clinician should be aware of these differences when treating patients from these ethnic groups. 相似文献4.
Emmanuel João Nogueira Leal Silva Yuri Nejaim Amaro I.V. Silva Francisco Haiter-Neto Alexandre A. Zaia Nestor Cohenca 《Journal of endodontics》2014
Introduction
The aim of this study was to analyze and characterize root canal morphology of maxillary molars of the Brazilian population using cone-beam computed tomographic (CBCT) imaging.Methods
Patients referred for a CBCT radiographic examination for accurate diagnosis and treatment planning were enrolled in the study. A total of 620 healthy, untreated, fully developed maxillary first and second molars were included (314 first molars and 306 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) fused roots, and (4) primary variations in the morphology of the root canal systems.Results
First and second molars showed a higher prevalence of 3 separate roots, mesiobuccal, distobuccal, and palatal, with 1 canal in each root (52.87% and 45.09%, respectively). Two canals in the mesiobuccal roots represented 42.63% of teeth, whereas mesiobuccal roots of second molars presented 2 canals in 34.32%. The most common anatomic variation in the maxillary first molar was related to the root canal configuration of the mesiobuccal root, whereas the root canal system of the maxillary second molar teeth showed more anatomic variables.Conclusions
Mesiobuccal roots of maxillary molar teeth had more variation in their canal system than the distobuccal or palatal roots. The root canal configuration of the maxillary second molars was more variable than the first molars in a Brazilian population. CBCT imaging is a clinically useful tool for endodontic diagnosis and treatment planning. 相似文献5.
Gautam P. Badole Manjusha M. Warhadpande Pratima R. Shenoi Chandrakant Lachure Shital G. Badole 《Journal of endodontics》2014
Introduction
The complexity of the root canal system of maxillary molars presents a constant challenge in the diagnosis and treatment of these teeth. This case report describes the importance of a surgical operating microscope and cone-beam computed tomographic (CBCT) imaging.Methods
Root canal treatment of a left maxillary first molar with 3 roots and 7 canals was successfully performed. Seven canals were identified with the help of a surgical operating microscope and CBCT imaging. CBCT images also confirmed the 3 roots and 7 canals in the right maxillary first molar.Results
CBCT images confirmed a type IV canal pattern in the distal and palatal root, whereas the mesial root had a type VIII canal pattern.Conclusions
The use of a surgical operating microscope and CBCT imaging helps the clinician to diagnose unusual anatomy of a tooth and facilitate successful endodontic treatment. 相似文献6.
Jorge N.R. Martins Moataz-Bellah A.M. Alkhawas Zaher Altaki Gianmarco Bellardini Luiza Berti Carlos Boveda Antonis Chaniotis Daniel Flynn Jose Antonio Gonzalez Jojo Kottoor Miguel Seruca Marques Adam Monroe Hani F. Ounsi Peter Parashos Gianluca Plotino Magnús F. Ragnarsson Ruben Rosas Aguilar Fábio Santiago António Ginjeira 《Journal of endodontics》2018,44(11):1641-1649.e1
Introduction
Maxillary first molar second mesiobuccal (MB2) root canal prevalence may change among different populations. The aim of this study was to analyze the worldwide prevalence of the MB2 root canal and understand its possible relation with sex, age, side, and root configuration using in vivo cone-beam computed tomographic (CBCT) assessment.Methods
Observers from 21 regions were calibrated to achieve a similar CBCT assessment methodology and instructed to collect data from 250 maxillary first molars in previously existing examinations. Intra- and interrater reliability tests were performed. The sample size included 5250 molars and was defined by way of a preliminary trial. Data collected included MB2 presence, sex, age, side, number of roots per tooth, and mesiobuccal root configuration. The z test for proportions in independent groups was used to analyze the differences among subgroups. P < .05 was considered significant.Results
The worldwide CBCT-assessed MB2 prevalence was 73.8%, ranging from 48.0% in Venezuela to 97.6% in Belgium. The prevalence in males and females was 76.3% and 71.8%, respectively (P < .05). Significantly higher MB2 proportions were found in younger patients and 3-rooted molar configurations. The group intraclass correlation coefficient and the percentage of agreement for the MB2 presence were 0.95 and 0.91, respectively. The intrarater Cohen kappa value was above 0.61 for all observers.Conclusions
MB2 prevalence in the analyzed regions varied widely. The differences may be associated with specificities within each region but also patient demographics. Males, younger patients, and 3-rooted configurations were associated with higher MB2 proportions. 相似文献7.
Introduction
The aim of this study was to determine the root and canal morphology of the mandibular first molars in a Korean population of Mongolian origin by retrospective analysis of a large number of cone-beam computed tomography (CBCT) images.Methods
A total of 976 subjects with bilateral mandibular first molars were examined by using in vivo CBCT methods. The number and configuration of roots, the number of root canals, and the canal configuration based on Vertucci's classification were determined.Results
Overall, 25.82% of examined molars had 3 roots, 73.51% had 2 roots, and 0.67% had 1 root. The incidence of fourth canal was 50.36%. A right-sided predominance was noted for extra distal roots (P < .001), whereas a left-sided predominance was observed for extra distal canals (P < .001). No significant sex-related differences were shown for their prevalence. The bilateral prevalence rate was 69.13% for extra distal roots and 78.08% for extra distolingual (DL) canals. In the mesial roots, type IV canal was the most frequent (76.86% for 2-rooted molars and 72.96% for 3-rooted molars). In the distal roots, type l was the most common (66.62% for 2-rooted molars and 99.40%–100% for 3-rooted molars). The incidence of 2 canals in distobuccal roots, first reported in this study, was 0.15%.Conclusions
Among mandibular first molars, there is a high prevalence of a separate DL root and/or a separate DL canal, and such molars commonly have 4 canals in the Korean population. CBCT is a useful tool for determining root and canal morphology. 相似文献8.
Ali Nosrat Prashant Verma M. Lamar Hicks S. Craig Schneider Ali Behnia Adham A. Azim 《Journal of endodontics》2017,43(11):1888-1896
A series of challenging cases with unusual canal anatomy in the palatal roots of maxillary first and second molars is presented. A review of the literature was done to elucidate the prevalence of anatomic variations in the palatal canal of maxillary first and second molars. An uncertain or indefinite radiographic appearance of the palatal canal, or eccentric deviation of the master cone or previous root canal filling was considered an indication of a bifurcated palatal canal. Five maxillary molars with a bifurcated palatal canal were identified. A MEDLINE database search was performed to identify studies on the palatal canal morphology of maxillary first and second molars. Data were categorized based on the methodology used in each study. The overall prevalence of anatomic variations in the palatal canal of maxillary first and second molars was less than 2%; however, anatomic variations occurred more frequently in certain ethnic groups, reaching up to 33% in maxillary first molars and up to 14% in maxillary second molars. This case series showed that even experienced endodontic clinicians can miss a bifurcated palatal canal if they are not aware of or overlook the hidden clues for these anatomic variations. The traditional assumption of an exclusively single-canal anatomy in palatal canals of maxillary molars needs to be changed, even though it is the most prevalent anatomy. The overall low percentage of more than 1 palatal canal in maxillary molars is disturbingly misleading, because in certain ethnic groups this prevalence can be considerably higher. 相似文献
9.
Gianluca Plotino Luigi Tocci Nicola M. Grande Luca Testarelli Daniela Messineo Mario Ciotti Gary Glassman Ferdinando D'ambrosio Gianluca Gambarini 《Journal of endodontics》2013
Introduction
The aim of the present study was to use cone-beam computed tomography (CBCT) to analyze root canal anatomy and symmetry of maxillary and mandibular first and second molar teeth of a white population.Methods
A total of 201 patients who required CBCT examinations as part of their dental diagnosis and treatment were enrolled in the present study. Overall, 596 healthy, untreated, well-developed maxillary and mandibular molar teeth (161 maxillary first molars, 157 maxillary second molars, 117 mandibular first molars, and 161 mandibular second molars) were examined by CBCT to establish the symmetry in root and canal anatomy between right and left sides in the same patient by evaluating the number of roots and root canals and the root canal configuration.Results
Three separate roots with 3 separate canals was the normal anatomy of maxillary first and second molars. Most mandibular first and second molars had 2 separate roots, and the majority had 3 canals. In the present study, first molars, both maxillary and mandibular, exhibited greater asymmetry than the second molars. Maxillary first molars were found to be symmetrical in 71.1% of patients, whereas maxillary second molars were symmetrical in 79.6%. The remaining 28.9% and 20.4% of patients, respectively, showed asymmetry. Around 30% of the mandibular first molars and 20% of the mandibular second molars showed asymmetry.Conclusions
The results of the present study reported a percentage of symmetry that varied from 70%–81%. These variations in symmetry should be taken in high consideration when treating 2 opposite molars in the same patient, because their anatomy may be different in up to 30% of the cases. 相似文献10.
Introduction
Root canal treatment of maxillary molars presenting with complex root canal configurations can be diagnostically and technically challenging.Methods
Nonsurgical endodontic therapy of a left maxillary first molar with three roots and eight root canals was successfully performed. This unusual morphology was diagnosed using a dental operating microscope (DOM) and confirmed with the help of cone-beam computed tomography (CBCT) images.Results
CBCT axial images showed that both the mesiobuccal and distobuccal root contained a Sert and Bayirli type XV canal, whereas the palatal root showed a Vertucci type II canal configuration.Conclusions
The use of a DOM and CBCT imaging in endodontically challenging cases can facilitate a better understanding of the complex root canal anatomy, which ultimately enables the clinician to explore the root canal system and clean, shape, and obturate it more efficiently. 相似文献11.
Introduction
The present study aimed to anatomically assess mandibular posterior teeth using cone-beam computed tomographic (CBCT) imaging for endodontic surgery.Methods
A total of 170 CBCT scans were evaluated for anatomic variations of mandibular posterior teeth. All the scans were obtained using a Planmeca Promax CBCT unit (Planmeca, Helsinki, Finland) with exposure settings of 90 kVp, 12 mA, 12 seconds, and 0.3-mm resolution. All CBCT images were reconstructed by Romexis Viewer 3.8.2. software (Planmeca) on a 16-inch LCD monitor (22MP47HQ; LG, Seoul, South Korea), and axial, coronal and sagittal views were evaluated.Results
The thickest buccal cortical plate was observed over the distal root of second molars (12.30 mm) among the molar teeth and over the second premolar root (5.41 mm) among the premolar teeth. The thinnest buccal cortical plate was observed over both the first and second premolar roots (0.42 mm) and over the mesial root of the first molar (0.62 mm) tooth. A 20.38-mm section was removed for surgical access during buccal resection of the distal root of the left second molar, and the closest distance from the apex to the inferior alveolar canal was 0 mm.Conclusions
Adequate knowledge of the anatomic dimensions of teeth and their surrounding structures is imperative for endodontic surgery. Information concerning the root thickness of mandibular posterior teeth at the site of root resection (apical 3 mm), buccal cortical plate thickness, and the distance from the apex of each tooth to the inferior alveolar canal and mental foramen can guide the surgeon before and during surgery. 相似文献12.
Navid Akbarzadeh Anita Aminoshariae Navid Khalighinejad J. Martin Palomo Ali Syed James C. Kulild Ghazal Sadeghi Andre Mickel 《Journal of endodontics》2017,43(11):1797-1801
Introduction
The present study aimed to determine the incidence and anatomic variation of the middle mesial (MM) canal in mandibular permanent first molars using cone-beam computed tomographic imaging and to evaluate the association between the presence of MM canals and anatomic landmarks of the pulp chamber floor in the mesial root.Methods
In this in vivo cross-sectional study, 210 CBCT scans of mandibular fist molars from 210 patients were included. CBCT scans were evaluated in 3 sections, and the following data were collected for further analysis: identification of the MM canal, the distance between the mesiobuccal (MB) and mesiolingual (ML) orifices, the presence of any isthmus between the MB and ML orifices, and the MB and ML root canal system (RCS) configurations. Binary logistic regression was performed to assess the effect of pulp floor anatomic characteristics as an independent variable on the outcome variable (the presence of an MM canal).Results
The overall prevalence of the identification of an MM canal regardless of age was 14.7%. Mandibular first molars with an isthmus between the MB and ML RCS configurations were almost 5 times more likely to show an MM canal (P < .05, odds ratio [OR] = 4.9). The MB-ML intraorifice distance was inversely associated with the presence of an MM canal (P < .05, OR = 0.73). Patients less than 42 years old were 4 times more likely to have an MM canal in their CBCT scans compared with patients older than 42 years old (P < .05, OR = 3.9).Conclusions
The suggested anatomic landmarks of the pulp chamber floor could act as a reliable predictive factor for the presence of an MM canal. This knowledge of anatomic clues may serve to better direct endodontists in locating an MM canal, which could prevent excessive removal of tooth structures. 相似文献13.
Objective
To investigate the bilateral concurrence and relationships between distolingual (DL) roots and DL canals of the mandibular first molars and second mesiobuccal (MB2) canals of the maxillary first molars using cone-beam computed tomography (CBCT).Methods
A total of 150 CBCT images showing all mandibular and maxillary first molars were retrospectively investigated in a South Korean subpopulation. The patient age, sex, positions of first molars, and presence of roots and canals were assessed. The frequency, bilateral concurrence of DL roots, DL canals, and MB2 canals, and concurrent relationship of DL roots or DL canals with MB2 canals were investigated. Data were analyzed using Fisher’s exact test and odds ratios from binary logistic regression.Results
The prevalences of DL roots, DL canals, and MB2 canals were 24.7, 42.7, and 56.0 %, respectively, and showed significant bilateral concurrence. A concurrent relationship between DL roots and MB2 canals was not demonstrated, whereas the presence of a DL canal was significantly correlated with the presence of an MB2 canal on the same side.Conclusions
The presence of a DL root of the mandibular first molar, a strong ethnic characteristic, could not predict the presence of an MB2 canal of the maxillary first molar. The correlation between DL canals and MB2 canals on the same side and the significant bilateral concurrence, whether present or absent, of DL roots, DL canals, and MB2 canals can aid clinicians in the prediction of additional canals in the first molars. 相似文献14.
目的：运用锥形束CT（CBCT）观察中国人群双侧上颌第一、第二磨牙的牙根和根管系统的解剖形态,为临床根管治疗提供依据。方法：选择200名患者的双侧上颌第一、第二恒磨牙（上颌第一恒磨牙354颗、上颌第二恒磨牙360颗）的CBCT扫描数据,使用NNT软件分析上颌第一、第二恒磨牙的牙根数、根管数、根管分型以及双侧对称情况。结果：上颌第一、第二磨牙主要为三根（99.44%和84.44%）。上颌第二磨牙的单根和双根较多见（15.28%）,其根管系统形态复杂,在根尖区有融合趋势。上颌第一磨牙的根管系统主要为3根四根管（78.97%）。上颌第二磨牙的三根管和四根管发现率接近（分别为47.37%和51.64%）。上颌第一磨牙的近颊根管系统主要根管分型为：Ⅳ型（57.79%）、Ⅱ型（19.83%）和Ⅰ型（15.58%）。上颌第二磨牙的近颊根管系统主要根管分型为：Ⅰ型（48.14%）、Ⅳ型（30.43%）和Ⅱ型（17.39%）。上颌第一、第二磨牙的远颊根和腭根主要为单根单根管,存在少量和罕见的变异。上颌第一、第二磨牙近颊根的根管数目和根管分型左右对称。结论：上颌第一磨牙近颊根管系统变异普遍存在,MB2根管为其主要的变异形式。上颌第二磨牙牙根数目和根管形态变异类型多,单根牙和双根牙的根管走向复杂多变。CBCT可以为识别根管形态提供准确依据。 相似文献
15.
Introduction
Root fusion is an anatomic variation in maxillary second molars (MSMs); however, the nature of this canal morphology as it relates to its root anatomy has not been fully clarified. The purpose of this study was to investigate the relationship between features of fused roots and root canal anatomy in MSMs using micro–computed tomographic imaging.Methods
One hundred eighty-seven extracted MSMs were scanned with the μCT50 (Scanco Medical, Bassersdorf, Switzerland), and their root and canal morphology was classified and analyzed using the classifications proposed by Yang and Vertucci. The number and position of canals that merged were recorded and compared among different root fusion types.Results
One hundred eight (57.75%) MSMs had 3 separate roots, and 79 (42.25%) had fused roots. Of the 79 fused roots, 22 showed partial canal merging, and 6 had complete canal merging. Canal merging was found with teeth with 3-root fusion more often than in those with 2-root fusion (P < .05). Of 28 merged canals, 16 occurred between mesiobuccal and distobuccal canals and 9 among mesiobuccal, distobuccal, and palatal canals.Conclusions
MSMs with fused roots may present a complicated root canal system as a result of canal merging. 相似文献16.
Yu-Chiao Wu Wan-Chien Cheng Pei-Wei Weng Ming-Pang Chung Chi-Chun Su Ho-Sheng Chiang Yi-Wen Cathy Tsai Chi-Hsiang Chung Yi-Shing Shieh Ren-Yeong Huang 《Journal of endodontics》2018,44(5):711-716.e1
Introduction
The aim of this study was to assess the prevalence of complicated root canals in permanent mandibular central incisors (PMCIs) and its correlation with the presence of a distolingual root (DLR) in permanent mandibular first molars (PMFMs) using cone-beam computed tomographic imaging in a Taiwanese population.Methods
A total of 400 patients (800 pairs of PMCIs and PMFMs) were qualified for further analysis. The prevalence of DLRs in PMFMs along with root canal configurations of PMCIs were assessed at subject and tooth levels. Multivariable logistic regression analysis was used to evaluate the correlation between the root canal configurations of PMCIs with the existence of DLRs in PMFMs.Results
The prevalence of PMFMs with DLRs and complicated root canal configurations in PMCIs was 23.0% and 15.6%, respectively. A significant difference in age (<50 years vs ≥50 years) was found for complicated root canal configurations in PMCIs. The most prevalent root canal system in PMCIs was Vertucci type I (84.4%) followed by type III (13.5%). A positive correlation between the presence of DLRs in PMFMs and complicated root canal configurations in PMCIs was noted. After adjusting for categoric variables including sex, age, and side, the odds ratios for the occurrence of complicated root canal configurations of PMCIs in the unilateral DLR group and the bilateral DLR group compared with the non-DLR group were 2.13 and 2.53, respectively.Conclusions
The concurrent appearance of DLRs in PMFMs and complicated root canal morphology in PMCIs is prominent in Taiwanese individuals. 相似文献17.
Xuan HAN Haibing YANG Guoju LI Lin YANG Cheng TIAN Yan WANG 《Journal of applied oral science : revista FOB》2012,20(5):563-567
As is commonly understood, the root canal morphology of the maxillary molars is
usually complex and variable. It is sometimes difficult to detect the distobuccal
root canal orifice of a maxillary second molar with root canal treatment. No
literature related to the distobuccal root canals of the maxillary second molars has
been published.
Objective
To investigate the position of the distobuccal root canal orifice of the maxillary second molars in a Chinese population using cone-beam computed tomography (CBCT).Material and methods
In total, 816 maxillary second molars from 408 patients were selected from a Chinese population and scanned using CBCT. The following information was recorded: (1) the number of root canals per tooth, (2) the distance between the mesiobuccal and distobuccal root canal orifice (DM), (3) the distance between the palatal and distobuccal root canal orifice (DP), (4) the angle formed by the mesiobuccal, distobuccal and palatal root canal orifices (∠ PDM). DM, DP and ∠ PDM of the teeth with three or four root canals were analyzed and evaluated.Results
In total, 763 (93.51%) of 816 maxillary second molars had three or four root canals. The distance between the mesiobuccal and distobuccal orifice was 0.7 to 4.8 mm. 621 (81.39%) of 763 teeth were distributed within 1.5-3.0 mm. The distance between the palatal and distobuccal orifice ranged from 0.8 mm to 6.7 mm; 585 (76.67%) and were distributed within 3.0-5.0 mm. The angle (∠ PDM) ranged from 69. 4º to 174.7º in 708 samples (92.80%), the angle ranged from 90º to 140º.Conclusions
The position of the distobuccal root canal orifice of the maxillary second molars with 3 or 4 root canals in a Chinese population was complex and variable. Clinicians should have a thorough knowledge of the anatomy of the maxillary second molars. 相似文献18.
Introduction
The knowledge of root canal anatomy is essential to ensure a successful outcome of surgical and nonsurgical root canal treatment. The aims of this article were to present 2 cases of maxillary molars with 3 mesiobuccal root canals and to review the available literature on this anatomic variation.Methods
The first case described a nonsurgical root canal treatment of tooth #16 in a 29-year-old man with the aid of a dental operating microscope. In the second case, an extracted maxillary right first molar was scanned by a micro–computed tomographic system and reconstructed 3-dimensionally using modeling software.Results
In both cases, the mesiobuccal root had 3 canals (type 3-2 in case I and type 3-3 in case II), whereas the distobuccal and palatal roots had a single canal. The literature review showed that the overall incidence of 3-canaled mesiobuccal roots in maxillary molars ranged from 1.3%–2.4% and that the most common root canal configuration was type 3-2.Conclusions
Clinicians should always anticipate the presence of extra canals in maxillary molars and use all the available tools to locate and treat these. 相似文献19.
Yeun Kim Seok-Woo Chang Jong-Ki Lee I-Ping Chen Blythe Kaufman Jin Jiang Bruce Y. Cha Qiang Zhu Kamran E. Safavi Kee-Yeon Kum 《Clinical oral investigations》2013,17(6):1541-1546
Objectives
Detailed information of complex anatomical configuration of mesiobuccal (MB) root is essential for successful endodontic treatment in maxillary first molars. The aims of this study were to investigate the configuration types present in multiple-canalled MB roots of maxillary first molars using micro-computed tomography (μCT) and to evaluate whether further modification to current configuration classifications are needed for in-depth morphology study of MB root canal system.Materials and methods
One hundred and fifty-four extracted human maxillary first molar MB roots were scanned by μCT (Skyscan) and their canals were reconstructed by 3D modeling software. Root canal configurations were categorized according to the classifications proposed by Weine and Vertucci. Canal configurations that did not fit into both classifications were categorized as non-classifiable.Results
One hundred and thirteen (73.4 %) MB roots had multiple canals. The most predominant canal configuration was Weine type III (two orifices and two foramens). Thirty-three (29.2 %) and 20 (17.7 %) MB roots had non-classifiable configuration types that could not be classified by the Weine and Vertucci classification, respectively. Three configurations (types 1–3, 2–3–2–3–2, and 2–3–4–3–2) were first reported in maxillary first molar MB roots.Conclusions
The present μCT study provided an in-depth analysis of canal configurations of the MB roots of maxillary first molar and suggests that additional modification of current configuration classifications may be needed to more accurately reflect the morphology configurations of MB roots.Clinical relevance
Clinicians should consider the complex canal configurations of the maxillary first molar MB roots during surgical or nonsurgical endodontic procedures. 相似文献20.
Yu-Chiao Wu Yi-Wen Cathy Tsai Wan-Chien Cheng Pei-Wei Weng Chi-Chun Su Ho-Sheng Chiang Ming-Pang Chung Chi-Hsiang Chung Yi-Shing Shieh Ren-Yeong Huang 《Journal of endodontics》2018,44(10):1492-1499.e1