Analysis of lumbar pedicle morphology in degenerative spines using multiplanar reconstruction computed tomography: what can be the reliable index for optimal pedicle screw diameter?

Purpose

The measurement of transverse pedicle width is still recommended for selecting a screw diameter despite being weakly correlated with the minimum pedicle diameter, except in the upper lumbar spine. The purpose of this study was to reveal the difference between the minimum pedicle diameter and conventional transverse or sagittal pedicle width in degenerative lumbar spines.

Methods

A total of 50 patients with degenerative lumbar disorders without spondylolysis or lumbar scoliosis of >10° who preoperatively underwent helical CT scans were included. The DICOM data of the scans were reconstructed by imaging software, and the transverse pedicle width (TPW), sagittal pedicle width (SPW), minimum pedicle diameter (MPD), and the cephalocaudal inclination of the pedicles were measured.

Results

The mean TPW/SPW/MPD values were 5.46/11.89/5.09 mm at L1, 5.76/10.44/5.39 mm at L2, 7.25/10.23/6.52 mm at L3, 9.01/9.36/6.83 mm at L4, and 12.86/8.95/7.36 mm at L5. There were significant differences between the TPW and MPD at L3, L4, and L5 (p < 0.01) and between the SPW and MPD at all levels (p < 0.01).

Conclusions

The MPD was significantly smaller than the TPW and SPW at L3, L4, and L5. The actual measurements of the TPW were not appropriate for use as a direct index for the optimal pedicle screw diameter at these levels. Surgeons should be careful in determining pedicle screw diameter based on plain CT scans especially in the lower lumbar spine.     

Correlating preoperative imaging with intraoperative fluoroscopy in iliosacral screw placement

Background

Percutaneous iliosacral screw placement can successfully stabilize unstable posterior pelvic ring injuries. Intraoperative fluoroscopic imaging is a vital component needed in safely placing iliosacral screws. Obtaining and appropriately interpreting fluoroscopic views can be challenging in certain clinical scenarios. We report on a series of patients to demonstrate how preoperative computed tomography (CT) imaging can be used to anticipate the appropriate intraoperative inlet and outlet fluoroscopic views.

Materials and methods

24 patients were retrospectively identified with unstable pelvic ring injuries requiring operative fixation using percutaneous iliosacral screws. Utilizing the sagittal reconstructions of the preoperative CT scans, anticipated inlet and outlet angle measurements were calculated. The operative reports were reviewed to determine the angles used intraoperatively. Postoperative CT scans were reviewed for repeat measurements and to determine the location and safety of each screw.

Results

Preoperative CT scans showed an average inlet of 20.5° (7°–37°) and an average outlet of 42.8° (30°–59°). Intraoperative views showed an average inlet of 24.9° (12°–38°) and an average outlet of 42.4° (29°–52°). Postoperative CT scans showed an average inlet of 19.4° (8°–31°) and an average outlet of 43.2° (31°–56°). The average difference from preoperative to intraoperative was 4.4° (−21° to 5°) for the inlet and 0.45° (−9° to 7°) for the outlet. The average difference between the preoperative and postoperative CT was 2.04° (0°–6°) for the inlet and 2.54° (0°–7°) for the outlet.

Conclusion

There is significant anatomic variation of the posterior pelvic ring. The preoperative CT sagittal reconstruction images allow for appropriate preoperative planning for anticipated intraoperative fluoroscopic inlet and outlet views within 5°. Having knowledge of the desired intraoperative views preoperatively prepares the surgeon, aids in efficiently obtaining correct intraoperative views, and ultimately assists in safe iliosacral screw placement.

Level of evidence

IV, Retrospective case series.     

Learning curve of thoracic pedicle screw placement using the free-hand technique in scoliosis: how many screws needed for an apprentice?

Purpose

The purpose of this study is to evaluate the learning curve of thoracic pedicle screw (TPS) placement of an inexperienced apprentice in scoliosis with the free-hand technique.

Methods

The patients with scoliosis who underwent TPS inserted with the free-hand technique by the apprentice under the direction of a chief surgeon were included in this study. The TPS placement by the apprentice was evaluated by examining the assessed position in chronological subgroups of 30 screws. The TPS position was assessed on the postoperative computed tomography (CT) scan images using Zdichavsky grading evaluation system and pedicle breach. The rates of good and dangerous screw placement and the rates of pedicle breaches in each apprentice subgroup were compared with those in the chief surgeon group.

Results

Thirty-eight patients with 311 TPS were retrospectively analyzed in our study. Of all screws, 154 pedicle screws were inserted by the apprentice, and were divided chronologically into five subgroups. The rates of dangerous placement performed by the apprentice in the first two subgroups were 26.7 and 23.3%, respectively, and were significantly higher than 9.1% by the chief surgeon (P < 0.05). Meanwhile, the breach rate was 46.6% in subgroup 1 and 50.0% in subgroup 2, and was significantly higher than 29.3% in chief surgeon (P < 0.05). Furthermore, after the first 60 TPS placements, the assessed rates in apprentice reached to a stable level, and no significant difference could be found among the subgroups (subgroup 3, 4 and 5) and the chief surgeon group (P > 0.05).

Conclusions

For an apprentice, an experience of at least 60 screw placements under the direction of an experienced surgeon is needed for inserting the TPS in scoliosis using the free-hand technique independently.     

Mid-term clinical results of minimally invasive decompression and posterolateral fusion with percutaneous pedicle screws versus conventional approach for degenerative spondylolisthesis with spinal stenosis

Introduction

In order to minimize perioperative invasiveness and improve the patients’ functional capacity of daily living, we have performed minimally invasive lumbar decompression and posterolateral fusion (MIS-PLF) with percutaneous pedicle screw fixation for degenerative spondylolisthesis with spinal stenosis. Although several minimally invasive fusion procedures have been reported, no study has yet demonstrated the efficacy of MIS-PLF in degenerative spondylolisthesis of the lumbar spine. This study prospectively compared the mid-term clinical outcome of MIS-PLF with those of conventional PLF (open-PLF) focusing on perioperative invasiveness and patients’ functional capacity of daily living.

Materials and methods

A total of 80 patients received single-level PLF for lumbar degenerative spondylolisthesis with spinal stenosis. There were 43 cases of MIS-PLF and 37 cases of open-PLF. The surgical technique of MIS-PLF included making a main incision (4 cm), and neural decompression followed by percutaneous pedicle screwing and rod insertion. The posterolateral gutter including the medial transverse process was decorticated and iliac bone graft was performed. The parameters analyzed up to a 2-year period included the operation time, intra and postoperative blood loss, Oswestry-Disability Index (ODI), Roland-Morris Questionnaire (RMQ), the Japanese Orthopaedic Association score, and the visual analogue scale of low back pain. The fusion rate and complications were also reviewed.

Results

The average operation time was statistically equivalent between the two groups. The intraoperative blood loss was significantly less in the MIS-PLF group (181 ml) when compared to the open-PLF group (453 ml). The postoperative bleeding on day 1 was also less in the MIS-PLF group (210 ml) when compared to the open-PLF group (406 ml). The ODI and RMQ scores rapidly decreased during the initial postoperative 2 weeks in the MIS-PLF group, and consistently maintained lower values than those in the open-PLF group at 3, 6, 12, and 24 months postoperatively. The fusion rate was statistically equivalent between the two groups (98 vs. 100%), and no major complications occurred.

Conclusion

The MIS-PLF utilizing a percutaneous pedicle screw system is less invasive compared to conventional open-PLF. The reduction in postoperative pain led to an increase in activity of daily living (ADL), demonstrating rapid improvement of several functional parameters. This superiority in the MIS-PLF group was maintained until 2 years postoperatively, suggesting that less invasive PLF offers better mid-term results in terms of reducing low back pain and improving patients’ functional capacity of daily living. The MIS-PLF utilizing percutaneous pedicle screw fixation serves as an alternative technique, eliminating the need for conventional open approach.     

Bilateral decompression using a unilateral pedicle construct for lumbar stenosis

Purpose

To determine the effectiveness of bilateral decompression via a unilateral approach using unilateral pedicle screw fixation for two-level lumbar stenosis with instability.

Methods

Between October 2006 and October 2010, 98 patients (61 men and 37 women) who had reached the three-year follow-up interval were treated with unilateral pedicle screw fixation at the authors’ institution. All patients underwent two-level transforaminal lumbar interbody fusion (TLIF), and the mean age was 59.6 years (range, 40–72). Visual analog scale (VAS) scores and Oswestry Disability Index (ODI) were used to assess the pre-operative and postoperative clinical results. Fusion status, the disc space height, and the whole lumbar lordotic angle were analysed for the radiological evaluation.

Results

The ODI scores decreased significantly in both early and late follow-up evaluations and the visual analog scale (VAS) score demonstrated significant improvement in late follow-up (P < 0.01). The disc space height (P < 0.05) and the whole lumbar lordotic angle (P < 0.05) were increased at the final follow-up. Successful fusion was achieved in all patients.

Conclusion

Bilateral decompression via a unilateral approach using unilateral pedicle screw fixation for two-level lumbar stenosis with instability, which can maintain the lumbar lordosis and the disc space height, is an effective and less invasive method than with bilateral constructs.     

Evaluation of the accuracy of femoral component orientation by the CT-based fluoro-matched navigation system

Purpose

Accurate orientation of acetabular and femoral components are important during THA. However, no study has assessed the use of the CT-based fluoro-matched navigation system during THA. Therefore, we have evaluated the accuracy of stem orientation by CT-based fluoro-matched navigation.

Methods

The accuracy of stem orientation by CT-based fluoro-matched navigation was assessed by postoperative CT data. Furthermore, we compared the postoperative stem orientation with the intraoperative registration errors.

Results

The average antetorsion error of the stem (navigation records − postoperative CT) was −0.5° ± 5.2°. The stem valgus error was 0.4° ± 2.7°. The accuracy of the navigation record for the orientation of the stem valgus was dependent on the intraoperative registration errors.

Conclusions

The clinical accuracy of CT-based fluoro-matched navigation is adequate for stem alignment orientation, and the intraoperative verification of registration errors is valuable for checking the accuracy of stem orientation by navigation.     

Intra- and extra-articular planes of reference for use in total hip arthroplasty: a preliminary study

Purpose

Acetabular component malalignment in total hip arthroplasty can lead to potential complications such as dislocation, component impingement and excessive wear. Computer-assisted orthopaedic surgery systems generally use the anterior pelvic plane (APP). Our aim was to investigate the reliability of anatomical landmarks accessible during surgery and to define new potential planes of reference.

Methods

Three types of palpations were performed: virtual, on dry bones and on two cadaveric specimens. Four landmarks were selected, the reproducibility of their positioning ranging from 0.9 to 2.3 mm. We then defined five planes and tested them during palpations on two cadaveric specimens.

Results

Two planes produced a mean orientation error of 5.0° [standard deviation (SD 3.3°)] and 5.6° (SD 2.7°).

Conclusions

Even if further studies are needed to test the reliability of such planes on a larger scale in vivo during surgery, these results demonstrated the feasibility of defining a new plane of reference as an alternative to the APP.     

Supplemental S1 fixation for type C pelvic ring injuries: biomechanical study of a long iliosacral versus a transsacral screw

Background

A single iliosacral screw placed into the S1 vertebral body has been shown to be clinically unreliable for certain type C pelvic ring injuries. Insertion of a second supplemental iliosacral screw into the S1 or S2 vertebral body has been widely used. However, clinical fixation failures have been reported using this technique, and a supplemental long iliosacral or transsacral screw has been used. The purpose of this study was to compare the biomechanical effect of a supplemental S1 long iliosacral screw versus a transsacral screw in an unstable type C vertically oriented sacral fracture model.

Materials and methods

A type C pelvic ring injury was created in ten osteopenic/osteoporotic cadaver pelves by performing vertical osteotomies through zone 2 of the sacrum and the ipsilateral pubic rami. The sacrum was reduced maintaining a 2-mm fracture gap to simulate a closed-reduction model. All specimens were fixed using one 7.0-mm iliosacral screw into the S1 body. A supplemental long iliosacral screw was placed into the S1 body in five specimens. A supplemental transsacral S1 screw was placed in the other five. Each pelvis underwent 100,000 cycles at 250 N, followed by loading to failure. Vertical displacements at 25,000, 50,000, 75,000, and 100,000 cycles and failure force were recorded.

Results

Vertical displacement increased significantly (p < 0.05) within each group with each increase in the number of cycles. However, there was no statistically significant difference between groups in displacement or load to failure.

Conclusions

Although intuitively a transsacral screw may seem to be better than a long iliosacral screw in conveying additional stability to an unstable sacral fracture fixation construct, we were not able to identify any biomechanical advantage of one method over the other.

Level of evidence

Does not apply—biomechanical study.     

Anterolateral approach using tibial tubercle osteotomy for total knee arthroplasty: can we predict failure?

Purpose

The purpose of this study was to identify predictive factors for the occurrence of complications in a consecutive series of patients who underwent step-cut tibial tubercle osteotomy (TTO) and subsequent screw refixation in primary total knee arthroplasty (TKA).

Methods

Using standardised conventional radiographs, critical parameters including TTO length and depth, proximal abutment width (OT), and orientation and placement of fixation screws were measured in 422 patients (mean age of 71 years and a follow-up time range of one to five years) with two screw fixations.

Results

Medial spatial orientation in the distal screw (11 %, p=0.046), the TTO length (<55.4 mm, p=0.013), the OT width (<14 mm, p=0.002) and the distance of the distal refixation screw from the TKA (<51.7 mm, p=0.003) were significant factors for the occurrence of complications.

Conclusions

Age, gender, comorbidities, height, weight and/or the body mass index had no significant influence on the occurrence of complications. The TTO-related complication rate was 3 %. Consideration of these key surgical factors leads to improved outcomes.     

Rheumatoid vertical and subaxial subluxation can be prevented by atlantoaxial posterior screw fixation

Purpose

Literature has described a risk for subsequent vertical subluxation (VS) and subaxial subluxation (SAS) following atlantoaxial subluxation in rheumatoid patients; however, the interaction of each subluxation and the radiographic findings for atlantoaxial fixation has not been described. The purpose of this study was to evaluate the effects of two different posterior atlantoaxial screw fixation on the development of subluxation in patients with rheumatoid atlantoaxial subluxation.

Methods

Between 1996 and 2006, rheumatoid patients treated with transarticular fixation and posterior wiring (TA) or C1 lateral mass–C2 pedicle screw fixations (SR) in the Nagoya Spine Group hospitals, a multicenter cooperative study group, were included in this study. VS, SAS, craniocervical sagittal alignment, and range of motion (ROM) at the atlantoaxial adjacent segments were investigated to determine whether posterior atlantoaxial screw fixation is a prophylactic or a risk factor for the development of VS and SAS.

Results

The mean follow-up was 7.2 years (4–12). No statistically significant difference was observed among the patients treated with either of the procedure during the follow-up period. Of 34 patients who underwent posterior atlantoaxial screw fixation, SAS was observed in 26.5 % during the follow-up period; however, VS was not observed. Postoperative C2–7 angle, and Oc–C1 and C2–3 ROM were significantly different between patients with and without postoperative SAS. The incidence of SAS was 38.9 % for TA and 12.5 % for SR; statistically significant differences were observed in the postoperative C1–2 and C2–7 angles, and C2–3 ROM.

Conclusions

Atlantoaxial posterior screw fixation may be an appropriate prophylactic intervention for VS and SAS if the atlantoaxial joint develops bony fusion following physiological alignment. Compared to TA, SR provided optimal atlantoaxial angle and prevented lower adjacent segment degeneration, thereby reducing SAS.     

Radiographic quantification of dynamic hip screw migration

Purpose

This study aimed to propose a technique to quantify dynamic hip screw (DHS®) migration on serial anteroposterior (AP) radiographs by accounting for femoral rotation and flexion.

Methods

Femoral rotation and flexion were estimated using radiographic projections of the DHS® plate thickness and length, respectively. The method accuracy was evaluated using a synthetic femur fixed with a DHS® and positioned at pre-defined rotation and flexion settings. Standardised measurements of DHS® migration were trigonometrically adjusted for femoral rotation and flexion, and compared with unadjusted estimates in 34 patients.

Results

The mean difference between the estimated and true femoral rotation and flexion values was 1.3° (95 % CI 0.9–1.7°) and −3.0° (95 % CI – 4.2° to −1.9°), respectively. Adjusted measurements of DHS® migration were significantly larger than unadjusted measurements (p = 0.045).

Conclusion

The presented method allows quantification of DHS® migration with adequate bias correction due to femoral rotation and flexion.

Electronic supplementary material

The online version of this article (doi:10.1007/s00264-013-2146-4) contains supplementary material, which is available to authorised users.     

Muscle spasticity associated with reduced whole-leg perfusion in persons with spinal cord injury

Objective

To determine the association between peripheral blood flow and spasticity in individuals with spinal cord injury (SCI).

Design

A cross-sectional study with measurements of muscle spasticity and whole-limb blood flow in individuals with SCI.

Setting

University of Texas at Austin and Brain & Spine Recovery Center, Austin, TX, USA.

Participants

Eighteen individuals (14 males and 4 females) with SCI were classified into high (N = 7), low (N = 6), and no (N = 5) spasticity groups according to the spasticity levels determined by the modified Ashworth scale scores.

Interventions

Whole-limb blood flow was measured in the femoral and brachial arteries using Doppler ultrasound and was normalized to lean limb mass obtained with dual-energy X-ray absorptiometry.

Outcome measures

Limb blood flow and muscle spasticity.

Results

Age, time post-SCI, and the American Spinal Injury Association impairment scale motor and sensory scores were not different among groups with different muscle spasticity. Femoral artery blood flow normalized to lean leg mass was different (P = 0.001) across the three spasticity groups (high 78.9 ± 16.7, low 98.3 ± 39.8, no 142.5 ± 24.3 ml/minute/kg). Total leg muscle spasticity scores were significantly and negatively correlated with femoral artery blood flow (r = −0.59, P < 0.01). There was no significant difference in brachial artery blood flow among the groups.

Conclusions

Whole-leg blood flow was lower in individuals with greater spasticity scores. These results suggest that a reduction in lower-limb perfusion may play a role, at least in part, in the pathogenesis leading to muscle spasticity after SCI.     

Fatigue performance of angle-stable tibial nail interlocking screws

Purpose

Tibial nail interlocking screw failure often occurs during delayed fracture consolidation or at early weight bearing of nailed unstable fractures, in general when high implant stress could not be reduced by other means. Is there a biomechanical improvement in long-term performance of angle stable locking screws compared to conventional locking screws for distal locking of intramedullary tibial nails?

Methods

Surrogate bones of human tibiae were cut in the distal third and distal locking of the 10 mm intramedullary tibial nail was performed with either two angle stable locking screws or two conventional locking screws in the mediolateral plane. Six specimens per group were mechanically tested under quasi-static and cyclic axial loading with constantly increasing force.

Results

Angle stable locking screw constructs exhibited significantly higher stiffness values (7,809 N/mm ± 647, mean ± SD) than conventional locking screw constructs (6,614 N/mm ± 859, p = 0.025). Angle stable locking screw constructs provided a longer fatigue life, expressed in a significantly higher number of cycles to failure (187,200 ± 18,100) compared to conventional locking screw constructs (128,700 ± 7,000, p = 0.004).

Conclusion

Fatigue performance of locking screws can be ameliorated by the use of angle stable locking screws, being especially important if the nail acts as load carrier and an improved stability during fracture healing is needed.     

The rate of screw misplacement in segmental pedicle screw fixation in adolescent idiopathic scoliosis

Background and purpose

There are no reports in the literature on the influence of learning on the pedicle screw insertion. We studied the effect of learning on the rate of screw misplacement in patients with adolescent idiopathic scoliosis treated with segmental pedicle screw fixation.

Method

We retrospectively evaluated low-dose spine computed tomography of 116 consecutive patients (aged 16 (12–24) years, 94 females) who were operated during 4 periods over 2005–2009 (group 1: patients operated autumn 2005–2006; group 2: 2007; group 3: 2008; and group 4: 2009). 5 types of misplacement were recorded: medial cortical perforation, lateral cortical perforation, anterior cortical perforation of the vertebral body, endplate perforation, and perforation of the neural foramen.

Reslts

2,201 pedicle screws were evaluated, with an average of 19 screws per patient. The rate of screw misplacement for the whole study was 14%. The rate of lateral and medial cortical perforation was 7% and 5%. There was an inverse correlation between the occurrence of misplacement and the patient number, i.e. the date of operation (r = –0.35; p < 0.001). The skillfulness of screw insertion improved with reduction of the rate of screw misplacement from 20% in 2005–2006 to 11% in 2009, with a breakpoint at the end of the first study period (34 patients).

Interpretation

We found a substantial learning curve; cumulative experience may have contributed to continued reduction of misplacement rate.Since its introduction by Suk et al. (1995), segmental pedicle screw fixation in adolescent idiopathic scoliosis (AIS) has undergone continuous development. The use of pedicle screws in the thoracic spine is not without risk, however, especially for neurovascular compromise. The rate of neurovascular complications associated with pedicle screw misplacement varies from 0% to 1.3% (Liljenqvist et al. 1997, Belmont et al. 2001 Suk et al. 2001, Coe et al. 2006, Upendra et al. 2008). Evolution of the operative techniques since 1995 (Suk et al. 1995, Kim and Lenke 2005, Kuklo et al. 2005, Lonner et al. 2006), our better understanding of the 3-dimensional nature of adolescent idiopathic scoliosis (AIS), and probably the advances in multidetector computed tomography (CT) technology—with the availability of modern CTs that enable dose reduction—have contributed to increasing use of the “pedicle screw-only construct” in the surgical correction of scoliosis.To our knowledge, there have been no reports in the literature on the learning curve regarding accuracy of screw placement. The rate of misplacement of thoracic pedicle screws, evaluated with CT, varies from about 6% (Di Silvestre et al. 2007) to 50% (Upendra et al. 2008). In all published reports on the accuracy of pedicle screw placement, the figures presented have shown the overall rate of misplacement while possible improvements in the skill of screw insertion over time have not been studied.We assessed whether a learning curve exists regarding the accuracy of screw placement in patients with AIS who are treated with segmental pedicle screw fixation.     

Ethnic differences in pedicle and bony spinal canal dimensions calculated from computed tomography of the cervical spine: a review of the English-language literature

Purpose

The aims of this study were to review published data on pedicle dimensions and bony spinal canal diameters calculated from CT examinations of the cervical spine through the English-language literature and analyze these data for ethnic disparities and similarities.

Materials and methods

The authors reviewed the literature on “pedicle” and “spinal canal” by conducting a bibliographic search using PubMed, Ovid MEDLINE, and Science Direct from January 1985 to December 2010. After evaluating all of the selected abstracts, we ultimately selected 19 studies involving living subjects: 12 studies on pedicle dimensions and 7 on spinal canal diameters. The four parameters, pedicle width (PW), pedicle transverse angle (PTA), anterior-posterior diameter of the spinal canal (APD), and transverse diameter of the spinal canal (TD), were analyzed at the relevant levels from C3 to C7. In addition, the values for pedicle dimensions and spinal canal diameters in the European/American populations were compared using the data from Asian populations as a baseline.

Results

The smallest mean PW was found at C4 in the male (5.1 mm) and female populations (4.1 mm); the largest mean PW was found at C7 in both male (7.7 mm) and female populations (7 mm). The PW in males was greater than in females at the majority of levels. The smallest mean PTA was found at C7 in both male (33.4°) and female populations (33°); the largest mean PTA was found at C4 in both male (53.2°) and female populations (52.1°). The overall PW, PTA, APD, and TD ratio of European/American to Asian populations was 91.4–98.8, 99.6–106.2, 110.7–122, and 100–108.3 %, respectively.

Conclusion

Although our cervical spine CT data were suggestive of possible ethnic differences in spinal canal morphology, our analysis failed to identify significant ethnic disparity in pedicle dimensions despite potential differences in physique between populations.     

Giant gallstone: A case report

Introduction

There is a high incidence of gallstones in the Chilean population.

Presentation of case

We report on a 57-year-old man who complained of abdominal pain in the right upper quadrant. Abdominal ultrasound indicated acute cholecystitis and a single, extremely large pear-shaped gallstone (16.8 cm long, and 7.8 cm at its widest point and 4.1 cm at its narrowest point). Its fresh weight (at operation) was 278.0 g and, after 4 years, its dry weight was 259.5 g. Emergency classical cholecystectomy was carried out successfully.

Discussion and Conclusion

We have been unable to find a report of a larger gallstone in the English or Spanish language medical literature.     

The anatomic study of clival screw fixation for the craniovertebral region

Purpose

To study the anatomic parameters related to clival screw and establish reference data concerning the craniovertebral fixation technique.

Methods

Morphometric measurement of the clivus and the surrounding anatomic structures were obtained on 41 dry bone specimens. Then, 2-D CT reconstruction of the craniovertebral region of 30 patients (19 men and 11 women, ranging in age from 20–64 years with an average age of 38.8 years) were performed to measure the safety range for a 3.5-mm screw placement. Nine entry points were evaluated. Finally, one male fresh cadaver specimen (age 46 years) was dissected to observe the craniovertebral region.

Results

The clivus faces the basilar artery, the V ~ XII cranial nerves, the pons, and ventral medulla oblongata at its intracranial surface. The longitudinal diameter of extracranial clivus was 25.87 ± 2.64 mm. The narrowest diameter of the clivus was 12.84 ± 1.08 mm, the distance between the left and right hypoglossal canal was 32.70 ± 2.09 mm at its widest part. The distance between the left and right structures, the maximum value was 49.31 ± 4.16 mm at carotid canal, the minimum value was 16.54 ± 2.04 mm at the occipital condyle. The measurement of clival screws placement simulation via 2-D CT reconstruction images shows the maximum upper insertion angle of three components the optimal entry points, the candidate points, the limit entry points was 130.19°, 125.23° and 85.72°, and the total mean screw length was 7.57, 10.13 and 15.6 mm at the vertical entry angle, respectively.

Conclusions

Clival screw placement is a viable option for craniovertebral fixation. There is a safe scope for the screw length and angle of the screw placement. And, these parameters obtained in the present study will be helpful for anyone contemplating the use of clival screw fixation.     

Late infections after dynamic stabilization of the lumbar spine with Dynesys

Introduction

Dynamic stabilization of the spine was developed as an alternative to rigid fusion in chronic back pain to reduce the risk of adjacent segment degeneration. Dynamic neutralization system (Dynesys, Zimmer CH) is one of the most popular systems available, but some midterm studies show revision rates as high as 30 %. Some late infectious complications in our patients prompted us to review them systematically. Propionibacterium recently has been shown to cause subtle infections of prosthetic material.

Materials and methods

Here, we report on a consecutive series of 50 Dynesys implants. In a median follow-up of 51 months (range 0–91), we identified 12 infectious and 11 non-infectious complications necessitating reoperation or removal of the implant in 17 patients.

Results

Material infections occurred after a median of 52 months (2–77) and were due to Propionibacterium alone (n = 4) or in combination (n = 3) in seven out of 11 patients. Clinical presentation combines new or increasing pain associated with signs of screw loosening on conventional X-rays; however, as many as 73.5 % of patients present some degree of screw loosening without being at all symptomatic of infection.

Conclusion

The high rate of late infections with low-grade germs and the frequency of screw loosening signs made us suspect a lack of integration at the bone-screw interface. Surgeons should be suspicious if the patient presents a combination of new or increasing pain and signs of screw loosening, and aggressive revision is recommended in these cases.     

Posterior approach lumbar and thoracolumbar hemivertebra resection in congenital scoliosis in children under 10 years of age: results with 3 years mean follow up

Introduction

The authors present 15 cases of congenital scoliosis with lumbar or thoracolumbar hemivertebra in children under 10 years of age (mean age at the time of surgery was 5.5 years). Patients were treated by posterior hemivertebra resection and pedicle screws two levels stabilization or three or more levels stabilization in the case of deformity above or under hemivertebra or for severe curve deformities.

Materials and methods

All operated patients had worsening curves; mean follow up was 40 months. The mean scoliosis curve value was 44° Cobb, and reduced to a mean 11° Cobb after surgery. The mean segmental kyphosis value was 19.7° Cobb, and reduced to a mean −1.8° Cobb after surgery. We did not consider total dorsal kyphosis value as all hemivertebras treated were at lumbar or thoracic lumbar level. No major complications emerged (infections, instrumentation mobilization or failure, neurological or vascular impairment) and only one pedicle fracture occurred.

Results

Our findings show that the hemivertebra resection with posterior approach instrumentation is an effective procedure, which has led to significant advances in congenital deformity control, which include excellent frontal and sagittal correction, excellent stability, short segment arthrodesis, low neurological impairment risk, and no necessity for further anterior surgery.

Conclusion

Surgery should be considered as soon as possible in order to avoid severe deformity and the use of long segment arthrodesis. The youngest patient we treated, with a completed dossier at the end the follow up was 24 months old at the time of surgery; the youngest patient treated by this procedure was 18 months old at the time of surgery.