Flow perfusion culture of human mesenchymal stem cells on silicate-substituted tricalcium phosphate scaffolds

Autologous bone grafts are currently the gold standard for treatment of large bone defects, but their availability is limited due to donor site morbidity. Different substitutes have been suggested to replace these grafts, and this study presents a bone tissue engineered alternative using silicate-substituted tricalcium phosphate (Si-TCP) scaffolds seeded with human bone marrow-derived mesenchymal stem cells (hMSC). The cells were seeded onto the scaffolds and cultured either statically or in a perfusion bioreactor for up to 21 days and assessed for osteogenic differentiation by alkaline phosphatase activity assays and by quantitative real-time RT-PCR on bone markers. During culture, cells from the flow cultured constructs demonstrated improved proliferation and osteogenic differentiation verified by a more pronounced expression of several bone markers, e.g. alkaline phosphatase, osteopontin, Runx2, bone sialoprotein II, and bone morphogenetic protein 2. Cells and matrix were distributed homogeneously throughout the entire scaffold in flow culture, whereas only a peripheral layer was obtained after static culture. A viable and homogenous ex vivo bone construct with superior osteogenic properties was produced in dynamic culture and may provide a replacement for autologous grafts.     

Bone augmentation by bone marrow mesenchymal stem cells cultured in three-dimensional biodegradable polymer scaffolds

Poly-lactic-glycolic acid (PLGA) is a biocompatible as well as biodegradable polymer and used in various medical applications. In this study, we evaluated efficiency of the specially designed three-dimensional porous PLGA as a scaffold for bone augmentation. First, cell attachment/proliferation, differentiation, and mineralization of Fisher 344 rat marrow mesenchymal stem cells (MSCs) cultured on the PLGA scaffold were analyzed. Viable MSCs were impregnated into pore areas of the scaffold and a moderate increase of DNA contents was seen. High alkaline phosphatase, osteocalcin content, and calcium content of MSCs in PLGA scaffolds under osteogenic differentiation conditions were seen after 14 or 21 days of culture. Subsequently, we implanted the PLGA/MSCs composites on rat calvaria bone for 30 days. Newly formed bone was seen in only the composite PLGA/MSCs implantation group, which had been precultured under osteogenic condition. We also demonstrated that the newly formed bone originated from the donor composites. These results demonstrate that the three-dimensional PLGA scaffold can support osteogenic differentiation of MSCs, and the scaffold combined with osteogenic MSCs can be used for in vivo bone tissue augmentation.     

Osteogenic differentiation of human bone marrow stromal cells on partially demineralized bone scaffolds in vitro

Tissue engineering has been used to enhance the utility of biomaterials for clinical bone repair by the incorporation of an osteogenic cell source into a scaffold followed by the in vitro promotion of osteogenic differentiation before host implantation. In this study, three-dimensional, partially demineralized bone scaffolds were investigated for their ability to support osteogenic differentiation of human bone marrow stromal cells (BMSCs) in vitro. Dynamic cell seeding resulted in homogeneous cell attachment and infiltration within the matrix and produced significantly higher seeding efficiencies when compared with a conventional static seeding method. Dynamically seeded scaffolds were cultured for 7 and 14 days in the presence of dexamethasone and evaluated on biochemical, molecular, and morphological levels for osteogenic differentiation. Significant elevation in alkaline phosphatase activity was observed versus controls over the 14-day culture, with a transient peak indicative of early mineralization on day 7. On the basis of RT-PCR, dexamethasone-treated samples showed elevations in alkaline phosphatase and osteocalcin expression levels at 7 and 14 days over nontreated controls, while bone sialoprotein was produced only in the presence of dexamethasone at 14 days. Scanning electron microscopy evaluation of dexamethasone-treated samples at 14 days revealed primarily cuboidal cells indicative of mature osteoblasts, in contrast to nontreated controls displaying a majority of cells with a fibroblastic cell morphology. These results demonstrate that partially demineralized bone can be successfully used with human BMSCs to support osteogenic differentiation in vitro. This osseous biomaterial may offer new potential benefits as a tool for clinical bone replacement.     

Differential alkaline phosphatase responses of rat and human bone marrow derived mesenchymal stem cells to 45S5 bioactive glass

Bioactive glass is used as both a bone filler and as a coating on implants, and has been advocated as a potential osteogenic scaffold for tissue engineering. Rat-derived mesenchymal stem cells (MSCs) show elevated levels of alkaline phosphatase activity when grown on 45S5 bioactive glass as compared to standard tissue culture plastic. Similarly, exposure to the dissolution products of 45S5 elevates alkaline phosphatase activity and other osteogenic markers in these cells. We investigated whether human MSCs grown under the same laboratory conditions as rat MSCs would exhibit similar responses. In general, human MSCs produce markedly less alkaline phosphatase activity than rat MSCs, regardless of cell culture conditions, and do not respond to the growth factor BMP-2 in the same way as rat MSCs. In our experiments there was no difference in alkaline phosphatase activity between human MSCs grown on 45S5 bioactive glass or tissue culture plastic, in samples from five different orthopaedic patients, regardless of culture media composition. Neither was there any consistent effect of 45S5 dissolution products on human MSCs from three different donors. These results suggest that the positive effects of bioactive glass on bone growth in human patients are not mediated by accelerated differentiation of mesenchymal stem cells.     

Flow perfusion culture induces the osteoblastic differentiation of marrow stroma cell-scaffold constructs in the absence of dexamethasone

Flow perfusion culture of scaffold/cell constructs has been shown to enhance the osteoblastic differentiation of rat bone marrow stroma cells (MSCs) over static culture in the presence of osteogenic supplements including dexamethasone. Although dexamethasone is known to be a powerful induction agent of osteoblast differentiation in MSC, we hypothesied that the mechanical shear force caused by fluid flow in a flow perfusion bioreactor would be sufficient to induce osteoblast differentiation in the absence of dexamethasone. In this study, we examined the ability of MSCs seeded on titanium fiber mesh scaffolds to differentiate into osteoblasts in a flow perfusion bioreactor in both the presence and absence of dexamethasone. Scaffold/cell constructs were cultured for 8 or 16 days and osteoblastic differentiation was determined by analyzing the constructs for cellularity, alkaline phosphatase activity, and calcium content as well as media samples for osteopontin. For scaffold/cell constructs cultured under flow perfusion, there was greater scaffold cellularity, alkaline phosphatase activity, osteopontin secretion, and calcium deposition compared with static controls, even in the absence of dexamethasone. When dexamethasone was present in the cell culture medium under flow perfusion conditions, there was further enhancement of osteogenic differentiation as evidenced by lower scaffold cellularity, greater osteopontin secretion, and greater calcium deposition. These results suggest that flow perfusion culture alone induces osteogenic differentiation of rat MSCs and that there is a synergistic effect of enhanced osteogenic differentiation when both dexamethasone and flow perfusion culture are used.     

Osteogenic differentiation of rabbit mesenchymal stem cells in thermo-reversible hydrogel constructs containing hydroxyapatite and bone morphogenic protein-2 (BMP-2)

The aim of this study was to assess the efficacy of ectopic bone formation in a three-dimensional hybrid scaffold in combination with hydroxyapatite (HA) and poly(NiPAAm-co-AAc) as an injectable vehicle in the form of a supporting matrix for the osteogenic differentiation of rabbit mesenchymal stem cells (MSCs). Osteogenic differentiation of MSCs in the hybrid scaffold was greatly influenced by the addition of growth factors. When the osteoinduction activity of hybrid scaffold was studied following implantation into the back subcutis of nude mouse in terms of histological and biochemical examinations, significantly homogeneous bone formation was histologically observed throughout the hybrid scaffolds containing growth factor (BMP-2: bone morphogenic protein-2). The level of alkaline phosphatase activity and osteocalcin content at the implanted sites of hybrid scaffolds were significantly high for the perfusion group compared with those in static culture group. We conclude that combination of MSC-seeded hybrid scaffold containing BMP-2 was a promising method by which to enhance in vitro osteogenic differentiation of MSC and in vivo ectopic bone formation.     

Modulation of osteogenic properties of biodegradable polymer/extracellular matrix scaffolds generated with a flow perfusion bioreactor

In this study, composite scaffolds consisting of both synthetic and natural components with controllable properties were generated by incorporating mineralized extracellular matrix (ECM) and electrospun poly(ε-caprolactone) (PCL) microfiber scaffolds. Mesenchymal stem cells (MSCs) were cultured on PCL scaffolds under flow perfusion conditions with culture medium supplemented with dexamethasone to investigate the effect of culture duration on mineralized extracellular matrix deposition. MSCs differentiated down the osteogenic lineage and produced extracellular matrix with different compositions of mineral, collagen, and glycosaminoglycan with distinct morphologies at various stages of osteogenesis. To determine whether the presence and maturity of mineralized extracellular matrix influences osteogenic differentiation in vitro, PCL/ECM constructs were decellularized to yield PCL/ECM composite scaffolds that were subsequently seeded with MSCs and cultured in the absence of dexamethasone. The presence of mineralized matrix reduced cellular proliferation while stimulating alkaline phosphatase activity with increasing amounts of calcium deposition over time. PCL/ECM composite scaffolds containing the most mature mineralized matrix resulted in the most rapid increase and highest levels of alkaline phosphatase activity and calcium deposition compared to all other scaffold groups. Therefore, we demonstrate that mineralized extracellular matrix generated under controlled flow perfusion conditions can impart osteogenic properties to an osteoconductive polymer scaffold, and that the maturity of this matrix influences osteogenic differentiation in vitro, even in the absence of dexamethasone.     

Effect of bone extracellular matrix synthesized in vitro on the osteoblastic differentiation of marrow stromal cells

Alternative materials for bone grafts are gaining greater importance in dentistry and orthopaedics, as the limitations of conventional methods become more apparent. We are investigating the generation of osteoinductive matrix in vitro by culturing cell/scaffold constructs for tissue engineering applications. The main strategy involves the use of a scaffold composed of titanium (Ti) fibers seeded with progenitor cells. In this study, we investigated the effect of extracellular matrix (ECM) laid down by osteoblastic cells on the differentiation of marrow stromal cells (MSCs) towards osteoblasts. Primary rat MSCs were harvested from bone marrow, cultured in dexamethasone containing medium and seeded directly onto the scaffolds. Constructs were grown in static culture for 12 days and then decellularized by rapid freeze-thaw cycling. Decellularized scaffolds were re-seeded with pre-cultured MSCs at a density of 2.5 x 10(5) cells/construct and osteogenicity was determined according to DNA, alkaline phosphatase, calcium and osteopontin analysis. DNA content was higher for cells grown on decellularized scaffolds with a maximum content of about 1.3 x 10(6) cells/construct. Calcium was deposited at a greater rate by cells grown on decellularized scaffolds than the constructs with only one seeding on day-16. The Ti/MSC constructs showed negligible calcium content by day-16, compared with 213.2 (+/- 13.6) microg/construct for the Ti/ECM/MSC constructs cultured without any osteogenic supplements after 16 days. These results indicate that bone-like ECM synthesized in vitro can enhance the osteoblastic differentiation of MSCs.     

Flow Perfusion Culture of Marrow Stromal Cells Seeded on Porous Biphasic Calcium Phosphate Ceramics

Calcium phosphate ceramics have been widely used for filling bone defects to aid in the regeneration of new bone tissue. Addition of osteogenic cells to porous ceramic scaffolds may accelerate the bone repair process. This study demonstrates the feasibility of culturing marrow stromal cells (MSCs) on porous biphasic calcium phosphate ceramic scaffolds in a flow perfusion bioreactor. The flow of medium through the scaffold porosity benefits cell differentiation by enhancing nutrient transport to the scaffold interior and by providing mechanical stimulation to cells in the form of fluid shear. Primary rat MSCs were seeded onto porous ceramic (60% hydroxyapatite, 40% β-tricalcium phosphate) scaffolds, cultured for up to 16 days in static or flow perfusion conditions, and assessed for osteoblastic differentiation. Cells were distributed throughout the entire scaffold by 16 days of flow perfusion culture whereas they were located only along the scaffold perimeter in static culture. At all culture times, flow perfused constructs demonstrated greater osteoblastic differentiation than statically cultured constructs as evidenced by alkaline phosphatase activity, osteopontin secretion into the culture medium, and histological evaluation. These results demonstrate the feasibility and benefit of culturing cell/ceramic constructs in a flow perfusion bioreactor for bone tissue engineering applications.     

Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering

It is of high clinical relevance in bone tissue engineering that scaffolds promote a high seeding efficiency of cells capable of osteogenic differentiation, such as human bone marrow-derived mesenchymal stem cells (hMSCs). We evaluated the effects of a novel polycaprolactone (PCL) scaffold on hMSC seeding efficiency, proliferation, distribution and differentiation. Porous PCL meshes prepared by fused deposition modeling (FDM) were embedded in matrix of hyaluronic acid, methylated collagen and terpolymer via polyelectrolyte complex coacervation. Scaffolds were cultured statically and dynamically in osteogenic stimulation medium for up to 28 days. Compared to naked PCL scaffolds, embedded scaffolds provided a higher cell seeding efficiency (t-test, P<0.05), a more homogeneous cell distribution and more osteogenically differentiated cells, verified by a more pronounced gene expression of the bone markers alkaline phosphatase, osteocalcin, bone sialoprotein I and bone sialoprotein II. Dynamic culture resulted in higher amounts of DNA (day 14 and day 21) and calcium (day 21 and day 28), compared to static culture. Dynamic culture and the embedding synergistically enhanced the calcium deposition of hMSC on day 21 and day 28. This in vitro study provides evidence that hybrid scaffolds made from natural and synthetic polymers improve cellular seeding efficiency, proliferation, distribution and osteogenic differentiation.     

A novel nanoparticle-enhanced photoacoustic stimulus for bone tissue engineering

In this study, we introduce a novel nanoparticle-enhanced biophysical stimulus based on the photoacoustic (PA) effect. We demonstrate that the PA effect differentiates bone marrow-derived marrow stromal cells (MSCs) grown on poly(lactic-co-glycolic acid) (PLGA) polymer films toward osteoblasts. We further show that the osteodifferentiation of the MSCs due to PA stimulation is significantly enhanced by the presence of single-walled carbon nanotubes (SWCNTs) in the polymer. MSCs, without the osteogenic culture supplements (0.01?M β-glycerophosphate, 50?mg/L ascorbic acid, 10(-8) M dexamethasone), were seeded onto plain glass slides, glass slides coated with PLGA, or glass slides coated with SWCNT-PLGA films and photoacoustically stimulated by a 527?nm Nd:YLF pulse laser, with a 200?ns pulse duration, and 10?Hz pulse frequency for 10?min a day for 15 consecutive days. The study had four control groups; three baseline controls similar to the three experimental groups but without PA stimulation, and one positive control where MSCs were grown on glass slides without PA stimulation but with osteogenic culture supplements. The osteogenic differentiation of all the groups was evaluated using quantitative assays (alkaline phosphatase, calcium, osteopontin) and qualitative staining (alizarin red). After 15 days, the PA stimulated groups showed up to a 350% increase in calcium content when compared with the non-PA stimulated positive control. Further, within the PA stimulated group, the PLGA-SWCNT group had 130% higher calcium values than the PLGA film without SWCNTs. These results were further corroborated by the analysis of osteopontin secretion, alkaline phosphatase expression, and qualitative alizarin red staining of extracellular matrix calcification. The results indicate that PA stimulation holds promise for bone tissue engineering and that the nanomaterials which enhance the PA effect should allow the development of biophysical rather than biochemical strategies to induce osteoinductive properties into tissue engineering scaffolds.     

Superior osteogenic capacity for bone tissue engineering of fetal compared with perinatal and adult mesenchymal stem cells

Mesenchymal stem cells (MSCs) from human adult bone marrow (haMSCs) represent a promising source for bone tissue engineering. However, their low frequencies and limited proliferation restrict their clinical utility. Alternative postnatal, perinatal, and fetal sources of MSCs appear to have different osteogenic capacities, but have not been systematically compared with haMSCs. We investigated the proliferative and osteogenic potential of MSCs from human fetal bone marrow (hfMSCs), human umbilical cord (hUCMSCs), and human adult adipose tissue (hATMSCs), and haMSCs, both in monolayer cultures and after loading into three-dimensional polycaprolactone-tricalcium-phosphate scaffolds.Although all MSCs had comparable immunophenotypes, only hfMSCs and hUCMSCs were positive for the embryonic pluripotency markers Oct-4 and Nanog. hfMSCs expressed the lowest HLA-I level (55% versus 95%-99%) and the highest Stro-1 level (51% versus 10%-27%), and had the greatest colony-forming unit-fibroblast capacity (1.6x-2.0x; p < .01) and fastest doubling time (32 versus 54-111 hours; p < .01). hfMSCs had the greatest osteogenic capacity, as assessed by von-Kossa staining, alkaline phosphatase activity (5.1x-12.4x; p < .01), calcium deposition (1.6x-2.7x in monolayer and 1.6x-5.0x in scaffold culture; p < .01), calcium visualized on micro-computed tomography (3.9x17.6x; p < .01) and scanning electron microscopy, and osteogenic gene induction. Two months after implantation of cellular scaffolds in immunodeficient mice, hfMSCs resulted in the most robust mineralization (1.8x-13.3x; p < .01).The ontological and anatomical origins of MSCs have profound influences on the proliferative and osteogenic capacity of MSCs. hfMSCs had the most proliferative and osteogenic capacity of the MSC sources, as well as being the least immunogenic, suggesting they are superior candidates for bone tissue engineering.     

Cell-derived matrix coatings for polymeric scaffolds

Cells in culture deposit a complex extracellular matrix that remains intact following decellularization and possesses the capacity to modulate cell phenotype. The direct application of such decellularized matrices (DMs) to 3D substrates is problematic, as transport issues influence the homogeneous deposition, decellularization, and modification of DM surface coatings. In an attempt to address this shortcoming, we hypothesized that DMs deposited by human mesenchymal stem cells (MSCs) could be transferred to the surface of polymeric scaffolds while maintaining their capacity to direct cell fate. The ability of the transferred DM (tDM)-coated scaffolds to enhance the osteogenic differentiation of undifferentiated and osteogenically induced MSCs under osteogenic conditions in vitro was confirmed. tDM-coated scaffolds increased MSC expression of osteogenic marker genes (BGLAP, IBSP) and intracellular alkaline phosphatase production. In addition, undifferentiated MSCs deposited significantly more calcium when seeded onto tDM-coated scaffolds compared with control scaffolds. MSC-seeded tDM-coated scaffolds subcutaneously implanted in nude rats displayed significantly higher blood vessel density after 2 weeks compared with cells on uncoated scaffolds, but we did not observe significant differences in mineral deposition after 8 weeks. These data demonstrate that DM-coatings produced in 2D culture can be successfully transferred to 3D substrates and retain their capacity to modulate cell phenotype.     

Adult Stem Cell Driven Genesis of Human-Shaped Articular Condyle

Uniform design of synovial articulations across mammalian species is challenged by their common susceptibility to joint degeneration. The present study was designed to investigate the possibility of creating human-shaped articular condyles by rat bone marrow-derived mesenchymal stem cells (MSCs) encapsulated in a biocompatible poly(ethylene glycol)-based hydrogel. Rat MSCs were harvested, expanded in culture, and treated with either chondrogenic or osteogenic supplements. Rat MSC-derived chondrogenic and osteogenic cells were loaded in hydrogel suspensions in two stratified and yet integrated hydrogel layers that were sequentially photopolymerized in a human condylar mold. Harvested articular condyles from 4-week in vivo implantation demonstrated stratified layers of chondrogenesis and osteogenesis. Parallel in vitro experiments using goat and rat MSCs corroborated in vivo data by demonstrating the expression of chondrogenic and osteogenic markers by biochemical and mRNA analyses. Ex vivo incubated goat MSC-derived chondral constructs contained cartilage-related glycosaminoglycans and collagen. By contrast, goat MSC-derived osteogenic constructs expressed alkaline phosphatase and osteonectin genes, and showed escalating calcium content over time. Rat MSC-derived osteogenic constructs were stiffer than rat MSC-derived chondrogenic constructs upon nanoindentation with atomic force microscopy. These findings may serve as a primitive proof of concept for ultimate tissue-engineered replacement of degenerated articular condyles via a single population of adult mesenchymal stem cells.     

Osteogenic differentiation of bone marrow stromal cells on poly(ε-caprolactone) nanofiber scaffolds

Nanofiber poly(ε-caprolactone) (PCL) scaffolds were fabricated by electrospinning, and their ability to enhance the osteoblastic behavior of marrow stromal cells (MSCs) in osteogenic media was investigated. MSCs were isolated from Wistar rats and cultured on nanofiber scaffolds to assess short-term cytocompatibility and long-term phenotypic behavior. Smooth PCL substrates were used as control surfaces. The short-term cytocompatibility results indicated that nanofiber scaffolds supported greater cell adhesion and viability compared with control surfaces. In osteogenic conditions, MSCs cultured on nanofiber scaffolds also displayed increased levels of alkaline phosphatase activity for 3 weeks of culture. Calcium phosphate mineralization was substantially accelerated on nanofiber scaffolds compared to control surfaces as indicated through von Kossa and calcium staining, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Increased levels of intra- and extracellular levels of osteocalcin and osteopontin were observed on nanofiber scaffolds using immunofluorescence techniques after 3 weeks of culture. These results demonstrate the enhanced tissue regeneration property of nanofiber scaffolds, which may be of potential use for engineering osteogenic scaffolds for orthopedic applications.     

Comparing hydroxyapatite with osteogenic medium for the osteogenic differentiation of mesenchymal stem cells on PHBV nanofibrous scaffolds

Having advantageous biocompatibility and osteoconductive properties known to enhance the osteogenic differentiation of mesenchymal stem cells (MSCs), hydroxyapatite (HA) is a commonly used material for bone tissue engineering. What remains unclear, however, is whether HA holds a similar potential for stimulating the osteogenic differentiation of MSCs to that of a more frequently used osteogenic-inducing medium (OIM). To that end, we used PHBV electrospun nanofibrous scaffolds to directly compare the osteogenic capacities of HA with OIM over MSCs. Through the observation of cellular morphology, the staining of osteogenic markers, and the quantitative measuring of osteogenic-related genes, as well as microRNA analyses, we not only found that HA was as capable as OIM for differentiating MSCs down an osteogenic lineage; albeit, at a significantly slower rate, but also that numerous microRNAs are involved in the osteogenic differentiation of MSCs through multiple pathways involving the inhibition of cellular proliferation and stemness, chondrogenesis and adipogenesis, and the active promotion of osteogenesis. Taken together, we have shown for the first time that PHBV electrospun nanofibrous scaffolds combined with HA have a similar osteogenic-inducing potential as OIM and may therefore be used as a viable replacement for OIM for alternative in vivo-mimicking bone tissue engineering applications.     

Bone Tissue Engineering Using Human Mesenchymal Stem Cells: Effects of Scaffold Material and Medium Flow

We report studies of bone tissue engineering using human mesenchymal stem cells (MSCs), a protein substrate (film or scaffold; fast degrading unmodified collagen, or slowly degrading cross-linked collagen and silk), and a bioreactor (static culture, spinner flask, or perfused cartridge). MSCs were isolated from human bone marrow, characterized for the expression of cell surface markers and the ability to undergo chondrogenesis and osteogenesis in vitro, and cultured for 5 weeks. MSCs were positive for CD105/endoglin, and had a potential for chondrogenic and osteogenic differentiation. In static culture, calcium deposition was similar for MSC grown on collagen scaffolds and films. Under medium flow, MSC on collagen scaffolds deposited more calcium and had a higher alcaline phosphatase (AP) activity than MSC on collagen films. The amounts of DNA were markedly higher in constructs based on slowly degrading (modified collagen and silk) scaffolds than on fast degrading (unmodified collagen) scaffolds. In spinner flasks, medium flow around constructs resulted in the formation of bone rods within the peripheral region, that were interconnected and perpendicular to the construct surface, whereas in perfused constructs, individual bone rods oriented in the direction of fluid flow formed throughout the construct volume. These results suggest that osteogenesis in cultured MSC can be modulated by scaffold properties and flow environment.     

Solution-mediated effect of bioactive glass in poly (lactic-co-glycolic acid)-bioactive glass composites on osteogenesis of marrow stromal cells

A previous study demonstrated that the incorporation of bioactive glass (BG) into poly (lactic-co-glycolic acid) (PLGA) can promote the osteoblastic differentiation of marrow stromal cells (MSCs) on PLGA by promoting the formation of a calcium-phosphate-rich layer on its surface. To further understand the mechanisms underlying the osteogenic effect of PLGA-BG composite scaffolds, whether solution-mediated factors derived from composite scaffolds/hybrids can promote osteogenesis of marrow stromal cells was tested. The dissolution product from PLGA-30%BG scaffold stimulated osteogenesis of MSCs, as was confirmed by increased mRNA expression of osteoblastic markers such as osteocalcin (OCN), alkaline phosphatase (ALP), and bone sialoprotein (BSP). The three-dimensional structure of the scaffolds may contribute to the production of cell-derived factors that promoted distant MSC differentiation. Thus PLGA-BG composites demonstrate significant potential as a bone-replacement material.     

Student Award for Outstanding Research Winner in the Ph.D. Category for the 9th World Biomaterials Congress, Chengdu, China, June 1-5, 2012: The interplay of bone-like extracellular matrix and TNF-α signaling on in vitro osteogenic differentiation of mesenchymal stem cells

As an initial step in the development of a bone tissue engineering strategy to rationally control inflammation, we investigated the interplay of bone-like extracellular matrix (ECM) and varying doses of the inflammatory cytokine tumor necrosis factor alpha (TNF-α) on osteogenically differentiating mesenchymal stem cells (MSCs) cultured in vitro on 3D poly(ε-caprolactone) (PCL) microfiber scaffolds containing pregenerated bone-like ECM. To generate the ECM, PCL scaffolds were seeded with MSCs and cultured in medium containing the typically required osteogenic supplement dexamethasone. However, since dexamethasone antagonizes TNF-α, the interplay of ECM and TNF-α was investigated by culturing na?ve MSCs on the decellularized scaffolds in the absence of dexamethasone. MSCs cultured on ECM-coated scaffolds continued to deposit mineralized matrix, a late stage marker of osteogenic differentiation. Mineralized matrix deposition was not adversely affected by exposure to TNF-α for 4-8 days, but was significantly reduced after continuous exposure to TNF-α over 16 days, which simulates the in vivo response, where brief TNF-α signaling stimulates bone regeneration, while prolonged exposure has damaging effects. This underscores the exciting potential of PCL/ECM constructs as a more clinically realistic in vitro culture model to facilitate the design of new bone tissue engineering strategies that rationally control inflammation to promote regeneration.     

Adhesion of mesenchymal stem cells to polymer scaffolds occurs via distinct ECM ligands and controls their osteogenic differentiation

The osteogenic potential of mesenchymal stem cells (MSCs) cultured on poly(lactide-co-glycolide) (PLGA) or poly(caprolactone) (PCL), two widely used polymeric biomaterials that have been reported to differentially support osteogenic differentiation, was compared in these studies. Here we report that MSCs cultured in 3-D PLGA scaffolds for up to 5 weeks significantly upregulate osteocalcin gene expression levels. By contrast, osteocalcin expression was markedly downregulated in 3-D PCL-based constructs over the same time course. We hypothesized that differential adsorption of extracellular matrix (ECM) proteins present in serum-containing culture medium and subsequent differences in integrin-mediated adhesion are responsible for these differences, and tested this hypothesis using thin (2-D) polymeric films. Supporting this hypothesis, significant amounts of fibronectin and vitronectin deposited onto both materials in serum-containing osteogenic media, with type-I collagen present in lower amounts. Adhesion-blocking studies revealed that MSCs adhere to PCL primarily via vitronectin, while type-I collagen mediates their attachment to PLGA. These adhesive mechanisms correlated with higher levels of alkaline phosphatase (ALP) activity after 2 weeks of monolayer culture on PLGA versus PCL. These data suggest that the initial adhesion of MSCs to PLGA via type-I collagen fosters osteogenesis while adhesion to PCL via vitronectin does not, and stress the need for an improved molecular understanding of cell-ECM interactions in stem cell-based therapies.