Evaluation of leaching and ecotoxicological properties of sewage sludge-fly ash mixtures

The objectives of this work were the evaluation of sewage sludge stabilization by mixing with fly ash, the examination of the physicochemical properties of the produced materials and their leachates and the assessment of their environmental impact by the evaluation of the ecotoxic characteristics. Different ratios of fly ash and sewage sludge (1:1, 1:2, 1:3, 1:6, and 1:9) were mixed for 48 and 72 h. After mixing, the liquid phase of the produced materials was analyzed for total coliforms and Escherichia coli, while the solid residue was dried and tested for the leaching characteristics by the application of TCLP and EN 12457-2 standard leaching methods. Furthermore, the produced leachates were analyzed for their content of specific metals, while their ecotoxicological characteristics were determined by the use of toxicity bioassays, using the marine photobacterium Vibrio fischeri and the crustacean Daphnia magna. The phytotoxicity of sewage sludge-fly ash mixtures was also determined by utilizing seeds of three higher plants (one monocotyl and two dicotyls). The mixtures exhibited low metal leaching in all cases, while the ecotoxic properties increased with the increase of fly ash/sewage sludge ratio. The phytotoxicity testing showed increased root length growth inhibition.     

Polycyclic aromatic hydrocarbons and polychlorobiphenyls in wastewaters and sewage sludges from the Paris area (France)

Polycyclic aromatic hydrocarbons (PAHs) and polychlorobiphenyls (PCBs) were investigated during 1999-2000 in the sewerage system to the Seine Aval treatment plant which drains the Paris area (France). Contamination of sludges from storage chambers indicated a local origin typical of motor car traffic with PAH concentrations (Sigma16) ranging from 14 to 31 mg kg(-1) of dry weight, pyrene/fluoranthene ratios ranging between 1.12 and 1.48 and PCB concentrations (Sigma7) ranging from 0.07 to 0.65 mg kg(-1) of dry weight. In the same way, sludges from sand removal tanks displayed PAH values related to the importance of traffic whereas PCBs were rather characteristic of a diffuse origin. Among the five sewers entering the Seine Aval treatment plant, Clichy Argenteuil, which drains a large industrial area, was the most polluted one (PAHs as Sigma3, 10 kg year(-1); PCBs as Sigma7, 3.5 kg year(-1)). Seasonal variations were observed for PAHs with higher levels in winter in relation with the occurrence of combustion processes. Ninety-eight percent of the PAHs and 76% of the PCBs were extracted during the treatment plant processes, the primary clarifier of which retained 50% of the pollutants. Fluoranthene and PCB concentrations in the final dehydrated sludge (mean values) were 1.07 and 0.623 mg kg(-1) of dry weight, respectively. For PCBs, a significant correlation was found (r=0.668, P<0.001) between wastewater and dehydrated sludge concentrations. Yearly measured amounts of PAHs (Sigma3) were twice higher in sludges (76.3 kg) than in precipitations (37.7 kg) whereas those of PCBs (Sigma7) brought by total atmospheric fallout (17.6 kg) and sludges (21.1 kg) did not differ significantly.     

Solidification as low cost technology prior to land filling of industrial hazardous waste sludge

The aim of this study is to stabilize and solidify two different treated industrial hazardous waste sludges, which were selected from factories situated close to Alexandria. They were selected to ensure their safe transportation and landfill disposal by reducing their potential leaching of hazardous elements, which represent significant threat to the environment, especially the quality of underground water. The selected waste sludges have been characterized. Ordinary Portland Cement (OPC), Cement Kiln Dust (CKD) from Alexandria Portland Cement Company, and Calcium Sulphate as a by-product from the dye industry were used as potential solidification additives to treat the selected treated waste sludges from tanning and dyes industry. Waste sludges as well as the solidified wastes have been leach-tested, using the General Acid Neutralization Capacity (GANC) procedure. Concentration of concerning metals in the leachates was determined to assess changes in the mobility of major contaminants. The treated tannery waste sludge has an acid neutralization capacity much higher than that of the treated dyes waste sludge. Experiment results demonstrated the industrial waste sludge solidification mix designs, and presented the reduction of contaminant leaching from two types of waste sludges. The main advantages of solidification are that it is simple and low cost processing which includes readily available low cost solidification additives that will convert industrial hazardous waste sludges into inert materials.     

Mutagens,toxicants, and other constituents in small city siudges in New York State

An analytical survey was conducted of sewage sludges from 15 small cities in New York State for mutagens, forty-four elements, polychlorinated biphenyls (PCBs) and radioactivity. Low levels of mutagenicity were detected in several of the samples. PCBs were very high in only one sample. A number of toxic elements were found at elevated concentrations in specific sludges but it is not possible to relate these to specific industrial sources with certainty. The concentrations of specific toxicants in five city sludges were above presently suggested federal guidelines for their suitability for land application. Gamma emission was comparatively low in all samples. The problems of analytical sampling and possible sources of specific constituents in sludge are discussed.     

A study of the leachate toxicity of metal-containing solid wastes using Daphnia magna

This paper examines the ecotoxicity of different actual inorganic wastes containing some potentially toxic metals commonly found in many industrial residues and the reduction in ecotoxicity obtained when the wastes are submitted to a solidification/stabilization process. The ecotoxicity was assessed as defined in the Spanish regulations on hazardous wastes, by means of the Daphnia magna Straus acute toxicity test applied to the toxicity characteristic leaching procedure (TCLP) waste leachate. On the basis of the EC50 values of the individual metals and the effect of the pH of the aqueous medium on D. magna, we have explored a method for estimating the toxicity of the TCLP waste leachate by calculating its EC50 value in the D. magna test. Although the method is only valid in cases in which a clear cause for the toxicity exists, the procedure described allows us to more completely explain the observed effects on the daphnids. The ecotoxicity of the residues after stabilization is less than that of the untreated waste, generally as a consequence of the reduction in metal leachability achieved by the immobilization treatment. The stabilization process was analyzed in terms of both the chemical and the ecotoxicological parameters, and the influence of leachate pH on the objectives of waste treatment is discussed.     

Analysis of Organic Pollutants in Sewage Sludges from the Valencian Community (Spain)

Seventeen sewage sludges were studied to analyse, with the minimum number of steps, the organic pollutants that the European Union proposes to be controlled for land application. The compounds determined were a selection of polycyclic aromatic hydrocarbons (PAHs); a selection of polychlorinated biphenyls (PCBs); di(2-ethylhexyl)phthalate (DEHP); nonylphenolic compounds, including nonylphenol (NP) and nonylphenol ethoxylates with 1 and 2 ethoxy groups (NP1EO + NP2EO); extractable organic halides (EOX); and linear alkylbenzene sulphonates (LAS) with an alkylic chain of 10 to 13 carbon atoms. The results were compared with the proposed regulatory limit values, and it was observed that NP + NP1EO + NP2EO and LAS exceeded the maximums in most samples, and DEHP exceeded some of them, whereas PAHs, PCBs, and EOX almost always went beyond the limits. The values obtained are similar to those from other countries, and it can be said that it is difficult to comply with the limits for NP + NP1EO + NP2EO and LAS in many of them, although this latter parameter was not considered in the study carried out by Leschber (2004) concerning the toxicity of sewage sludge. Statistical multivariant analysis was used to look for some relationship between the results of pollutants and the characteristics of the samples, and it was found that the ratio of NP1EO + NP2EO to NP was related to sludge treatment at the sewage plant. At the same time, it was seen that the higher values of organic pollutants belonged to digested sludges.     

给水处理中含砷污泥的浸出毒性和初步处置研究

目的研究混凝微滤工艺处理高砷饮用水所产生的铁盐和铝盐含砷污泥的浸出毒性,以及含砷污泥的处置与利用方法。方法采用中国国家标准方法和USEPA的TCLP方法检验了含砷污泥的浸出毒性,并采用水泥固化的方法对含砷污泥的处置进行了初步研究。将铁盐含砷污泥添加到路用基材中,探讨其废物利用的可能性。结果铁盐和铝盐含砷污泥TCLP方法浸出液中砷的浓度分别为118μg/L和420μg/L,高于国家标准方法的9.5μg/L和11.8μg/L,但两种方法测定的浸出毒性均低于危险废物浸出毒性的国家标准。普通硅酸盐水泥固化体的TCLP浸出液中砷浓度仅为污泥的10%左右,固化体的无侧限抗压强度分别为3.25MPa和0.76MPa,可以满足堆放要求。掺入少量铁盐含砷污泥的路用基材强度提高12%左右。结论给水处理中含砷污泥不属于具有浸出毒性的危险废物,水泥固化是处置含砷污泥的有效方法,将少量铁盐含砷污泥添加到路用基材中使含砷污泥得到了有效利用,又避免了可能出现的环境污染问题。     

Comparison of Polycyclic Aromatic Hydrocarbons Levels in Sludges from Municipal and Industrial Wastewater Treatment Plants

This study was carried out to investigate the concentrations and potential sources of the polycyclic aromatic hydrocarbons (PAHs) in sludge of 14 wastewater treatment plants (WWTPs). Sludge samples were collected from 2 municipal WWTPs, 11 industrial WWTPs, and 1 sanitary landfill leachate treatment plant within the city of Bursa, Turkey during the summer of 2008. Ultrasonication was applied for extraction and gas chromatography–mass spectrometry was used to analyze the PAH contents of the samples. Twelve of the 16 EPA-listed PAH compounds were determined. Total PAH concentrations (∑₁₂ PAHs) determined in all of the sludge samples ranged from 1,781 to 19,866 μg/kg dry matter (dm). The sum of 8 of the 11 EU PAHs varied between 1,481 and 17,314 μg/kg dm, and 3 of the samples exceeded the proposed EU limit for land application. One of the automotive industry sludges contained the highest level of PAHs, followed by one of the municipal sludges. The average sum of 5- and 6-ring PAH compounds in all of the sludge samples amounted to almost 65% of the total PAHs. The diagnostic ratios of specific PAHs were calculated to determine the dominant sources for the PAHs in the sludge samples.     

Analytical survey of elements and other constituents in Central New York state sewage sludges

Thirty-nine elements, polychlorinated biphenyls (PCBs), volatile N-nitrosamines and gamma emission were determined by several instrumental methods in sewage sludges from 24 communities in Central New York. Relatively high concentrations of certain elements or PCBs were found in sludges from specific communities. For example, antimony and certain rare earth elements used in glass manufacture were found at elevated levels in sludge from Corning, New York. Various volatile N-nitrosamines were found in all of the sludges in trace amounts. Gamma emission levels were relatively low in all sludges. One-third of the sludges would be classified as unsuitable for agricultural land application based on presently suggested federal guidelines for acceptable heavy metal or PCB concentrations in sludges. The question of the application of sludge to agricultural land is discussed.     

Assessment of the mutagenic potency of sewage sludges contaminated with polycyclic aromatic hydrocarbons by an Ames sludges for fluctuation assay

The mutagenicity of crude extracts and subfractions of two samples of a reference sewage sludge material and two sewage sludges from two wastewater treatment plants (WWTP), one urban and the other one urban mixed with industrial, was assessed using an Ames fluctuation assay based on 384-well microtiter plates with liquid cultures. Crude extracts of sludges were obtained by ultrasonic extraction with dichloromethane/methanol, and further column fractionation yielded two fractions, one of which containing mutagenic polycyclic aromatic hydrocarbons (PAHs). Quantitative analysis performed by gas chromatography-mass spectrometry gave sum concentrations of the 16 PAHs listed as priority pollutants by the U.S. Environmental Protection Agency at levels between 1,305 and 2,442 microg/kg. Subjecting crude extracts and column fractions to the mutagenicity assay with Salmonella strains TA98 and TA 100 provided good qualitative correlation between the presence of mutagenic PAH and the induction of gene mutations. In general, the crude extracts and the PAH-fractions induced positive responses in the assay with both bacterial strains on metabolic activation by S9 rat-liver homogenate, whereas direct-acting mutagens were not detectable. In the assay with the real sludge samples of two different WWTPs, TA98 proved to be more sensitive than TA100; however, similar sensitivities of the tester strains were observed for two reference sewage sludge materials of the same origin. The outcomes of the Ames fluctuation assay demonstrated its performance as a cost-effective and relatively rapid screening tool to assess the genotoxic potential of complex environmental samples.     

Sediment Contamination of Residential Streams in the Metropolitan Kansas City Area, USA: Part II. Whole-Sediment Toxicity to the Amphipod Hyalella azteca

This is the second part of a study that evaluates the influence of nonpoint sources on the sediment quality of five adjacent streams within the metropolitan Kansas City area, central United States. Physical, chemical, and toxicity data (Hyalella azteca 28-day whole-sediment toxicity test) for 29 samples collected in 2003 were used for this evaluation, and the potential causes for the toxic effects were explored. The sediments exhibited a low to moderate toxicity, with five samples identified as toxic to H. azteca. Metals did not likely cause the toxicity based on low concentrations of metals in the pore water and elevated concentrations of acid volatile sulfide in the sediments. Although individual polycyclic aromatic hydrocarbons (PAHs) frequently exceeded effect-based sediment quality guidelines [probable effect concentrations (PECs)], only four of the samples had a PEC quotient (PEC-Q) for total PAHs over 1.0 and only one of these four samples was identified as toxic. For the mean PEC-Q for organochlorine compounds (chlordane, dieldrin, sum DDEs), 4 of the 12 samples with a mean PEC-Q above 1.0 were toxic and 4 of the 8 samples with a mean PEC-Q above 3.0 were toxic. Additionally, four of eight samples were toxic, with a mean PEC-Q above 1.0 based on metals, PAHs, polychlorinated biphenyls (PCBs), and organochlorine pesticides. The increase in the incidence of toxicity with the increase in the mean PEC-Q based on organochlorine pesticides or based on metals, PAHs, PCBs, and organochlorine pesticides suggests that organochlorine pesticides might have contributed to the observed toxicity and that the use of a mean PEC-Q, rather than PEC-Qs for individual compounds, might be more informative in predicting toxic effects. Our study shows that stream sediments subject to predominant nonpoint sources contamination can be toxic and that many factors, including analysis of a full suite of PAHs and pesticides of both past and present urban applications and the origins of these organic compounds, are important to identify the causes of toxicity.     

Accumulation of metals,polychlorinated biphenyls,and polycyclic aromatic hydrocarbons in sediments from the lower Passaic River,New Jersey

Thirteen sediment cores of 1.5–6 m depth were collected from the lower Passaic River in Newark, New Jersey and assayed for metals, total petroleum hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), and Aroclor^® and coplanar polychlorinated biphenyls (PCBs). Chronological profiles of chemical concentrations at specified depths and sediment accumulation rates in each core were determined by ¹³⁷Cs and ²¹⁰Pb radioisotope measurements. Temporal concentrations of these chemicals were compared to available benchmark sediment toxicity values to assess historic and current toxic hazards to aquatic organisms. Elevated concentrations of several metals, including copper, lead, mercury, nickel, and zinc, were found in surface and buried sediments at concentrations that greatly exceeded Long and Morgan (1991) Effects Range-Low (ER-L) and Effects Range-Median (ER-M) values. Aroclors^® 1242, 1248, and 1254 and several PAHs were also found at concentrations exceeding Long and Morgan (1991) benchmark toxicity values. In general, the highest metal and PAH concentrations were found in sediment deposited prior to the 1960s. Elevated PCB concentrations were found in sediment deposited between 1950 and 1980. The results indicate that the lower Passaic River is heavily contaminated due to recent and historical municipal and industrial discharges from local and up-stream sources. The primary sources of PCBs, PAHs, and metals appear to be discharges of industrial effluents either directly into the waterway or through combined sewer overflows. Additional inputs are probably from urban runoff entering through combined sewer overflows and storm drains.     

Feeding inhibition in the soil collembolan Folsomia candida as an endpoint for the estimation of organic waste ecotoxicity

Despite the increasing quantities of organic wastes that are being reused in soils, there are few studies that focus on the selection of bioassays for the ecotoxicological risk assessment of organic wastes to soils. In the present study, differences in feeding inhibition in the soil collembolan Folsomia candida were evaluated as an ecotoxicological endpoint for the assessment of risk to soils amended with polluted organic wastes. Seven organic wastes (dewatered sewage sludges, thermally dried sewage sludges, composted sewage sludges, and a thermally dried pig slurry) were tested. These wastes had different origins, treatments, and pollutant burdens, and were selected as a representative sample of the wide variety of wastes currently generated. A clear dose response was observed for this parameter, with an increase in percentage of individual feeding inhibition with increased doses of organic wastes. More significantly, feeding inhibition correlated highly with mortality and reproduction inhibition in the different wastes. Composted sludges displayed the lowest toxicity, followed by thermally dried sludge and dewatered sludge. Thermally dried pig slurry showed the highest toxicity for feeding, with lower median effective concentration (EC50) values than the lowest dose tested. Among waste physicochemical parameters and pollutants, low organic matter stability appeared to be the main predictor of potential adverse effects on soil fauna, because it correlated significantly with feeding inhibition and mortality. Furthermore, feeding inhibition tests were run over a short exposure time (less than 7 d), which, together with the results obtained, makes this bioassay a good screening tool for organic waste toxicity.     

The Tenax fraction of PAHs relates to effects in sewage sludges

In the present study a toxicity evaluation (Heterocypris incongruens, OstracodToxKit FTM Test) was carried out for ten municipal sewage sludges in relation to polycyclic aromatic hydrocarbon (PAH) contents in these sludges. PAHs content in the sewage sludges was determined by a vigorous extraction method and solid phase extraction with Tenax-TA. The main aim of the evaluation was establishing whether it was possible to determine the negative influence of PAHs in the sewage sludges on H. incongruens mortality and growth inhibition using the Tenax-TA method. H. inconguens showed increased growth inhibition and mortality when exposed to all sewage sludges. Significant relationships were noted between the content of some Tenax-TA PAH fractions and the total organic carbon content, cation exchange capacity and concentration of Ca²⁺ ions. The toxicity was proportional to Tenax-TA concentrations and was not governed by the total concentration found in the sewage sludge.     

Semifield testing of a bioremediation tool for atrazine-contaminated soils: evaluating the efficacy on soil and aquatic compartments

The present study evaluated the bioremediation efficacy of a cleanup tool for atrazine-contaminated soils (Pseudomonas sp. ADP plus citrate [P. ADP?+?CIT]) at a semifield scale, combining chemical and ecotoxicological information. Three experiments representing worst-case scenarios of atrazine contamination for soil, surface water (due to runoff), and groundwater (due to leaching) were performed in laboratory simulators (100 × 40 × 20 cm). For each experiment, three treatments were set up: bioremediated, nonbioremediated, and a control. In the first, the soil was sprayed with 10 times the recommended dose (RD) for corn of Atrazerba and with P. ADP?+?CIT at day 0 and a similar amount of P. ADP at day 2. The nonbioremediated treatment consisted of soil spraying with 10 times the RD of Atrazerba (day 0). After 7 d of treatment, samples of soil (and eluates), runoff, and leachate were collected for ecotoxicological tests with plants (Avena sativa and Brassica napus) and microalgae (Pseudokirchneriella subcapitata) species. In the nonbioremediated soils, atrazine was very toxic to both plants, with more pronounced effects on plant growth than on seed emergence. The bioremediation tool annulled atrazine toxicity to A. sativa (86 and 100% efficacy, respectively, for seed emergence and plant growth). For B. napus, results point to incomplete bioremediation. For the microalgae, eluate and runoff samples from the nonbioremediated soils were extremely toxic; a slight toxicity was registered for leachates. After only 7 d, the ecotoxicological risk for the aquatic compartments seemed to be diminished with the application of P. ADP?+?CIT. In aqueous samples obtained from the bioremediated soils, the microalgal growth was similar to the control for runoff samples and slightly lower than control (by 11%) for eluates.     

Polycyclic Aromatic Hydrocarbons and Polychlorinated Biphenyls in Topsoils of Harbin, China

Levels of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) in 17 topsoil samples collected in and around the city of Harbin, an industrial center in Northeast China for decades, are presented. Total concentrations (ng/g dry weight [dw]) ranged from 17 to 3,260 (mean: 508) for PAHs and 0.30 to 6.17 (mean: 1.63) for PCBs. As expected, large differences of the concentration levels of PAHs and PCBs in topsoil were found among the samples from urban, suburban, and background/rural sites. Total PCB and PAH concentrations were higher in industrialized areas than those at the other sites, with a ratio of up to one order of magnitude, possibly indicating the urban source of these chemicals. The PAH profiles were similar among samples, with high percentages of high molecular weight (HMW) PAHs and domination of four-ring PAHs. Compositions of PCB homologues showed that tri-CBs and tetra-CBs were abundant in all soil samples. There was also a higher abundance of low molecular weight (LMW) PCBs and lower abundance of HMW PCBs at background sites than other areas, indicating the urban fractionation phenomenon. Pyrogenic origins were the dominant PAH sources in surface soil at most urban sites, whereas petrogenic origins were the major PAH sources in surface soil at all the rural and background sites. The TEQ concentrations (pg/g dw) of all four dioxin-like PCBs (CBs 77, 81, 105, and 118) were 0.009 for humans and mammals, 0.005 for fish, and 1.42 for birds. Strong correlations were found between PAH and PCB concentrations and soil organic matter and, also, between PAH and PCB concentrations.     

Tidal Creek and Salt Marsh Sediments in South Carolina Coastal Estuaries: II. Distribution of Organic Contaminants

Twenty-eight tidal creeks along the South Carolina coast were sampled during the summer of 1995 to determine the levels of sediment contamination including organic chemicals (i.e., polycyclic aromatic hydrocarbons [PAHs], polychlorinated biphenyls [PCBs], and DDT and its metabolites) associated with different types and varying levels of watershed development (i.e., industrial/urban, suburban, forested, and salt marsh). Organic analysis utilized high-performance liquid chromatography (HPLC) with fluorescence detection and capillary gas chromatography–ion trap mass spectrometry (GC-ITMS) for PAHs, and gas chromatography with electron capture detection (GC-ECD) for pesticides and PCBs. Results indicated that creeks with industrial/urban watersheds had significantly higher concentrations of PAHs, PCBs, and DDT compared with creeks with suburban and forested (reference) watersheds. The suburban watershed class of creeks had concentrations of half the PAH analytes and the total PCBs which exceeded the concentrations found in the forested watershed class of creeks. The spatial distribution of organic contaminants was evaluated in four of these tidal creek–salt marsh systems representing urban/industrial, suburban, and forested watersheds, from the creek channel to the adjacent uplands. The distribution of organic contaminants within each representative creek was not concordant with the total organic carbon or the clay content of the sediment. The representative industrial/urban creek-marsh system, Diesel Creek, had the highest concentration of PAHs in the creek channel and the highest concentration of PCBs and DDT on the marsh surface, primarily in the upper portion of the system. The representative suburban creek-marsh system, Shem Creek, had elevated levels of both PAHs and PCBs throughout the entire system. This system also had one site with a total PAH concentration of 324,000 ppb and a total DDT concentration that was 20–100 times higher than the other sites. One of the representative forested creek-marsh systems, Rathall Creek, had low levels of the three organic contaminants except for one sampling site that had PAH concentrations a factor of 10 higher than the other sites. The other representative forested creek-marsh system, Long Creek, had low levels of PAHs and PCBs, but elevated levels of DDT were observed, particularly in the upper portion on the marsh surface. The results of this study suggest that (1) anthropogenic alteration of the land cover in the watersheds of tidal creek–salt marsh systems may increase the organic contaminant loadings in the sediment, and (2) tidal creek–salt marsh sediments, particularly in the creek channel, are repositories and potentially conduits of organic contaminants from the upland environment to the deeper estuarine areas. Received: 8 December 1998/Accepted: 1 April 1999     

Toxicity of Sediment Collected Upriver and Downriver of Major Cities Along the Lower Mississippi River

The Lower Mississippi River contributes significantly to the biodiversity and ecological stability of the alluvial valley, but agricultural, industrial, and municipal developments have historically impacted environmental quality of the river. Toxicity of sediment and sediment pore water was used to assess the current effects of major cities on sediment quality along the Lower Mississippi River. Composite sediment samples were collected from four sites upriver and four sites downriver of five major cities: Cairo, IL; Memphis, TN; Vicksburg, MS; Baton Rouge, LA; and New Orleans, LA. Acute toxicity was determined by exposing Hyalella azteca to solid-phase sediment for 10 days with two water renewals per day and to sediment pore water under static conditions for 96 h. After the initial tests, animals were exposed to ultraviolet light for 16 h. Sediments were analyzed for organics (organochlorine pesticides, PCBs, organophosphate insecticides, and PAHs) and metals (Cr, Cu, Pb, Mn, Ni, Zn). With the exception of upriver from Memphis, solid-phase sediments were not toxic to H. azteca. Pore water from sediments collected upriver of Memphis also showed slight toxicity. Exposure of H. azteca to ultraviolet light did not increase the toxicity of the sediment or pore-water samples, indicating a lack of toxicity from PAHs that are photoactivated by ultraviolet light. Chemical analyses did not reveal any contaminant levels of concern in the sediments. Based on toxicity testing and chemical analyses, quality of sediments collected from the Lower Mississippi was good, with the exception of sites sampled upriver of Memphis. Received: 3 June 1997/Accepted: 22 December 1997     

An Evaluation of the Toxicity of Contaminated Sediments from Waukegan Harbor, Illinois, Following Remediation

Waukegan Harbor in Illinois was designated as a Great Lakes Area of Concern due to high concentrations of sediment-associated polychlorinated biphenyls (PCBs). The objective of this study was to evaluate the toxicity of 20 sediment samples collected after remediation (primarily dredging) of Waukegan Harbor for PCBs. A 42-day whole sediment toxicity test with the amphipod Hyalella azteca (28-day sediment exposure followed by a 14-day reproductive phase) and sediment toxicity tests with Microtox(R) were conducted to evaluate sediments from Waukegan Harbor. Endpoints measured were survival, growth, and reproduction (amphipods) and luminescent light emission (bacteria). Survival of amphipods was significantly reduced in 6 of the 20 sediment samples relative to the control. Growth of amphipods (either length or weight) was significantly reduced relative to the control in all samples. However, reproduction of amphipods identified only two samples as toxic relative to the control. The Microtox basic test, conducted with organic extracts of sediments identified only one site as toxic. In contrast, the Microtox solid-phase test identified about 50% of the samples as toxic. A significant negative correlation was observed between reproduction and the concentration of three polynuclear aromatic hydrocarbons (PAHs) normalized to total organic carbon. Sediment chemistry and toxicity data were evaluated using sediment quality guidelines (consensus-based probable effect concentrations, PECs). Results of these analyses indicate that sediment samples from Waukegan Harbor were toxic to H. azteca contaminated at similar contaminant concentrations as sediment samples that were toxic to H. azteca from other areas of the United States. The relationship between PECs and the observed toxicity was not as strong for the Microtox test. The results of this study indicate that the first phase of sediment remediation in Waukegan Harbor successfully lowered concentrations of PCBs at the site. Though the sediments were generally not lethal, there were still sublethal effects of contaminants in sediments at this site observed on amphipods in long-term exposures (associated with elevated concentrations of metals, PCBs, and PAHs).     

The fate of phenolics in wastewater — Determination by direct-injection GLC and Warburg respirometry

The effects of phenol, cresol isomers, and chlorinated phenols on the respiration of activated sludges have been studied using Warburg techniques. The biodegradability of these materials under simulated treatment conditions in activated sludge was also determined. It was found that less than 10 mg/liter concentrations of phenol and chlorophenols, while being biodegraded, proved toxic to sludges unacclimated to phenolics. The toxic effects of the cresols were not so severe for the sludges tested.Phenolic analysis in these studies was accomplished employing GLC techniques with a new column packing, dinonylphthalate on Chromosorb G. This chromatographic technique was shown to be effective in rapidly identifying phenolic materials in activated sludge, treatment plant effluents, and industrial discharges: the separation of all isomers tested, exceptm- andp-chlorophenol, was possible using this technique.