共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
3.
4.
Eric T. Ricchetti Michael S. Khazzam Patrick J. Denard David M. Dines T. Bradley Edwards Vahid Entezari Richard J. Friedman Grant E. Garrigues Robert J. Gillespie Brian M. Grawe Andrew Green Armodios M. Hatzidakis J. Gabriel Horneff Jason E. Hsu Andrew Jawa Yuxuan Jin Peter S. Johnston Joseph P. Iannotti 《Journal of shoulder and elbow surgery / American Shoulder and Elbow Surgeons ... [et al.]》2021,30(4):736-746
5.
6.
7.
Ahmed Haleem Phelopater Sedrak Chetan Gohal George S. Athwal Moin Khan Bashar Alolabi 《HSS journal》2022,18(2):219
Background:Hybrid glenoid components in total shoulder arthroplasty (TSA) utilize both polyethylene and metal components to provide short-term stability and long-term biologic fixation through bone ingrowth.Questions/Purpose:We sought to systematically review the literature for studies that assessed outcomes of TSA performed using hybrid glenoid components.Methods:PubMed, Medline, Cumulative Index to Nursing and Allied Health Literature (CINAHL), and Embase were searched systematically for articles measuring clinical and patient-reported outcomes and rates of complication and revision following TSA using a hybrid glenoid component.Results:Seven studies with 593 shoulders were included in this review. The mean age of patients was 65 ± 1 years, and 46% of the population was male. Mean follow-up was 50 months (4.2 years). The overall complication rate was 7% and rate of revision was 2.5%; glenoid radiolucency was present in 33% of shoulders at mean follow-up of 50 months. Mean improvements in forward elevation, external rotation, internal rotation score, and abduction were 49°, 28°, 2 points, and 42°, respectively. Mean improvements in Constant, American Shoulder and Elbow Surgeons (ASES), and University of California, Los Angeles (UCLA) scores were 36 points, 52 points, and 17 points, respectively.Conclusion:Our review found that TSA using hybrid glenoid components results in low rates of complication and revision at early follow-up. Long-term studies are warranted to understand more fully the role of hybrid glenoid components in TSA. 相似文献
8.
9.
Min-Su Kim Yong Girl Rhee Joo Han Oh Jae Chul Yoo Kyu-Cheol Noh Sang-Jin Shin 《Clinics in Orthopedic Surgery》2022,14(1):119
BackgroundThe purpose of this study was to evaluate the clinical and radiologic outcomes of reverse total shoulder arthroplasty (RTSA) using a small glenoid baseplate in patients with a small glenoid and to analyze the contributing factors to scapular notching.MethodsA total of 71 RTSAs performed using a 25-mm baseplate were evaluated at a mean of 37.0 ± 3.3 months. Shoulder function was evaluated using American Shoulder and Elbow Surgeons (ASES) score, visual analog scale (VAS) for pain, Single Assessment Numeric Evaluation (SANE) for satisfaction, and active range of motion. Scapular neck angle (SNA), prosthesis-scapular neck angle (PSNA), peg glenoid rim distance (PGRD), and sphere bone overhang distance (SBOD) were measured to assess the effects on scapular notching.ResultsShoulder function (ASES: 39.4 ± 13.8 preoperative vs. 76.2 ± 9.5 at last follow-up, p < 0.001), VAS for pain (6.1 ± 1.8 vs. 1.7 ± 1.4, p < 0.001), SANE for satisfaction (7.0 ± 11.8 vs. 83.4 ± 15.3, p < 0.001), and active forward flexion (115.6° ± 40.1° vs. 141.6° ± 17.2°, p < 0.001) were significantly improved. The mean diameter of the inferior glenoid circle was 26.0 ± 3.0 mm and the mean glenoid vault depth was 24.0 ± 4.5 mm. Scapular notching was found in 13 patients (18.3%) and acromial fracture in 2 patients (2.8%). There were no significant differences in preoperative SNA and PSNA at postoperative 3 years between patients with and without scapular notching (101.6° ± 10.5° and 110.8° ± 14.9° vs. 97.3° ± 13.3° and 104.9° ± 12.4°; p = 0.274 and p = 0.142, respectively). PGRD and SBOD were significantly different between patients with scapular notching and without scapular notching (24.8 ± 1.6 mm and 2.6 ± 0.5 mm vs. 21.9 ± 1.9 mm and 5.8 ± 1.9 mm; p < 0.001 and p < 0.001, respectively).ConclusionsRTSA using a 25-mm baseplate in a Korean population who had relatively small glenoids demonstrated low complication rates and significantly improved clinical outcomes. Scapular notching can be prevented by proper positioning of the baseplate and glenosphere overhang using size-matched glenoid baseplates. 相似文献
10.
《Seminars in Arthroplasty》2023,33(1):94-104
BackgroundAugmented reverse shoulder arthroplasty (RSA) implants restore glenohumeral joint alignment in cases of asymmetric glenoid wear. However, no consensus has been reached on whether the use of metallic augmented RSA baseplates and bone graft reconstruction are equivalent in terms of implant fixation and risk of implant loosening. Therefore, the purpose of this study was to compare 2 augmented RSA designs by assessing the amount of interfacial micromotion generated under realistic physiological loading.MethodsFinite element analysis models of 9 scapulae with Walch-type B2 or B3 glenoid morphology were virtually implanted with both a metallic augmented baseplate (AUG-RSA) and using the angled bony increased-offset RSA procedure (BIO-RSA). Simulation of physiological loading was performed on each of the 18 finite element analysis models. The relative tangential and normal micromotion at the implant-to-glenoid interface was compared in each anatomical quadrant.ResultsThe AUG-RSA and angled BIO-RSA showed similar magnitudes of micromotion in most anatomical quadrants of the glenoid. Within the superior quadrant, AUG-RSA displayed a higher magnitude of mean and maximum tangential micromotion (mean: 16.6 ± 2.4 μm, P < .000; maximum: 35.1 ± 5.3 μm, P < .000). The proportion of the posterior quadrant experiencing >50 microns of micromotion was also statistically greater with AUG-RSA (5.8 ± 2.5 %, P = .047).ConclusionBecause of its statistically greater micromotion and portions of contact exceeding the accepted 50-micron threshold, the AUG-RSA may be more likely to have inhibited bone on-growth. However, the clinical importance of these differences remains unclear. 相似文献
11.
12.
13.
14.
15.
《Seminars in Arthroplasty》2017,28(3):134-139
Total shoulder arthroplasty has been shown to generate good to excellent results for patients with osteoarthritis and a functioning rotator cuff. However, a major complication after primary total shoulder arthroplasty is loosening of the glenoid component, which has been shown to be commonly associated with glenoid retroversion. This article highlights the importance of correcting the glenoid version and reviews various techniques, such as eccentric reaming, posterior bone grafting, reverse shoulder arthroplasty, and augmented glenoid implantation to address glenoid retroversion in the setting of total shoulder arthroplasty. 相似文献
16.
17.
Carlo Felice De Biase Giovanni Ziveri Marco Delcogliano Francesca de Caro Stefano Gumina Mario Borroni Alessandro Castagna Roberto Postacchini 《International orthopaedics》2013,37(10):1949-1955
Purpose
The current models of reverse shoulder arthroplasty (RSA) expose the procedure to the risk of scapular notching, possibly leading to loosening of the glenoid. We compared the clinical and radiographic results obtained with a concentric or eccentric glenosphere to assess whether the eccentric design might give better clinical results and avoid or decrease the risk of scapular notchingMethods
Of our patients, 31 underwent RSA using a concentric glenosphere (group A), while 29 had an eccentric glenosphere (group B). Postoperatively, patients were followed-up at one to 12 months and annually thereafter, with the mean being 33 months in group A and 27.5 in group B. In both groups the minimum follow up (F-U) was 24 months. Preoperatively and at each F-U starting from six months, patients were assessed using the Constant score. On radiographs, prosthesis scapular neck angle (PSNA), distance between scapular neck and glenosphere (DBSNG) and peg-glenoid rim distance (PGRD) were calculated. The severity of notching was classified in four grades.Results
In group A the mean Constant score increased by 30 points compared to the preoperative score and the active ROM increased considerably. At latest F-U, the mean PSNA, DBSNG and PGRD were, respectively, 87°, 3.4 mm and 19.8 mm. Glenoid notching was present in 42 % of cases. In group A, the mean Constant score increased by 34 points and the mean ROM was better than in group A. The average PSNA, PGRD and DBSNG were, respectively, 92°, 21.2 mm and 4.3 mm. Radiographs showed no inferior scapular notching.Conclusions
The eccentric glenosphere yielded better clinical results than the concentric glenosphere and was associated with no scapular notching. 相似文献18.
19.
Alec A. Macaulay R. Michael Greiwe Louis U. Bigliani 《Clinics in Orthopedic Surgery》2010,2(4):196-202
Rotator cuff deficient arthritis of the glenohumeral joint, especially cuff tear arthropathy, has proved a challenging clinical entity for orthopaedic surgeons ever since Charles Neer originally detailed the problem in 1983. Understanding has improved regarding the pathophysiology and pathomechanics underlying cuff tear arthropathy. Surgical reconstruction options can lead to excellent outcomes for patients afflicted with these painful and functionally limited shoulders. Humeral hemiarthroplasty and reverse total shoulder arthroplasty have jumped to the forefront in the treatment of cuff tear arthropathy. As studies continue to look at the results of these procedures in cuff tear arthropathy, existing indications and treatment algorithms will be further refined. In this article the history and pathophysiology of cuff tear arthropathy are reviewed. Additionally, the clinical findings and results of surgical reconstruction are discussed. 相似文献