Comparative analysis of fixation configurations and their effect on outcome after medial open-wedge high tibial osteotomy

PurposeThe purposes of this study were to analyze and compare 1) the postoperative fixation configurations, and 2) radiological and clinical outcomes between the new conceptual fixation device (LCfit) and the conventional locking plates.MethodsRetrospective comparative analysis of 304 cases who underwent open-wedge high tibial osteotomy with four different locking plate systems including the LCfit system was conducted. In analyzing the fixation configuration of each locking plate system, the plate position, the gap between plate and bone, screw angle, and screw length were evaluated from postoperative CT scans. The clinical outcomes and radiological parameters of four patient groups corresponding to the four locking plate systems were also compared.ResultsIn the analysis of the fixation configurations, the LCfit system showed more posteromedial plate position, decreased gap between plate and bone, reduced screw angle, and longer screw length compared to the other three locking plates. However, there were no significant differences in clinical outcomes and radiological parameters such as hip-knee-ankle angle, weight-bearing line position, medial proximal tibial angle, and posterior slope between the four groups.ConclusionThe newly designed fixation system (LCfit) for open-wedge high tibial osteotomy showed fixation configurations that have theoretical mechanical advantages over conventional anatomical locking plates. However, there were no significant differences in clinical outcomes and radiological parameters between LCfit and the other locking plate systems.Level of evidenceLevel III, retrospective cohort study.     

Minimally invasive surgery for young female patients with mild-to-moderate juvenile hallux valgus deformity

BackgroundWe aimed to compare the clinical and radiographic outcomes of minimally invasive surgery (MIS) and distal chevron metatarsal osteotomy (DCMO) for young female patients with mild-to-moderate juvenile hallux valgus deformity.MethodsWe retrospectively reviewed the radiographs and clinical findings of young female patients with mild-to-moderate juvenile hallux valgus who underwent MIS (25 feet) or DCMO (30 feet). In 12 of 25 MIS feet, 2.0-mm bio-absorbable pins were used as an additional fixation device crossing the osteotomy site, and 1.4-mm Kirschner wires were used in the remaining 13 feet.ResultsRadiographic and clinical parameters preoperatively and at the final follow-up were not significantly different between the 2 groups. There were no significant differences in the increments of hallux valgus angle (HVA), distal metatarsal articular angle, medial sesamoid position, first metatarsal length, metatarsal length index, or relative second metatarsal length. Two MIS subgroups according to the additional fixation device showed no significant differences in HVA, the first to second intermetatarsal angle lateral translation ratio, or plantar offset at the final follow-up.ConclusionsMIS for young female patients with mild-to-moderate juvenile hallux valgus deformity had similar radiographic and clinical outcomes compared to DCMO. Regarding additional fixation crossing the osteotomy site, both temporary Kirschner wires and absorbable pins showed no radiographic differences in terms of correction maintenance.Level of evidence: 3.     

Technique Tip: Medial prominence bone spur resection in the third-generation percutaneous Chevron-Akin Osteotomy Technique (PECA) for hallux valgus correction

The third-generation percutaneous chevron and Akin osteotomy (PECA) technique for surgical management of hallux valgus has shown improvement in clinical and radiographic outcomes. During this procedure, lateral translation and fixation of the first metatarsal head results in the formation of a bony prominence on the medial side of the distal aspect of the first metatarsal which can cause pain and discomfort to the patient. We describe two techniques to address this bony prominence; either i) excision osteotomy and removal of the fragment or ii) a dorsal closing wedge osteotomy retaining the bony fragment.Level of EvidenceLevel V, expert opinion     

Radiographic effects observed in the coronal view after medial malleolar osteotomy at total ankle arthroplasty in rheumatoid arthritis cases

BackgroundWhen soft tissue balance is not acceptable at total ankle arthroplasty (TAA) for rheumatoid varus deformity, medial malleolar osteotomy has been performed. At the same time, the shape of the ankle joint changes after soft tissue balancing with such an osteotomy, however there is few information for the radiographic findings after the osteotomy. Thus, radiographic changes in the coronal view of such cases were investigated.MethodsJSSF-RA foot and ankle scale and SAFE-Q scores were determined along with pre/postoperative radiographic parameters of the ankle joint in 70 ankles (65 patients) with rheumatoid arthritis followed for a mean of 7.9 years (range, 2–16 years) after TAA. Seven ankles were excluded because those underwent lateral or lateral/medial malleolar osteotomy. Twenty-seven ankles underwent medial malleolar osteotomy, and compared with 36 ankles without osteotomy.ResultsAll ankles achieved bone union after medial malleolar osteotomy, and the tibial medial malleolus (TMM) angle was significantly decreased [30.3°–19.1°] following significant valgus correction [TC angle: −2.7° to 0.5°]. The gap due to medial soft tissue tightness was significantly improved by medial malleolar osteotomy [4.95° to 0.7°]. Lateral malleolar fractures sometimes occurred (19%: 5/27 ankles) at valgus correction, but they healed completely without any internal fixation.ConclusionMedial malleolar osteotomy was useful in rheumatoid varus ankle for not only controlling the soft tissue balance, but also providing a stabilized shape of the ankle joint. Lateral malleolar fractures were caused by valgus correction following medial malleolar osteotomy in some cases, but all fractures were completely healed without any internal fixation.     

Matched retrospective analysis of three different fixation devices for chevron osteotomy

Chevron osteotomy with consecutive fixation is a commonly performed operative treatment option for hallux valgus deformities. The present retrospective study aims to compare the clinical and radiological outcome of novel bioabsorbable magnesium screw fixation with metal screw and Kirschner wire fixation.Eighteen matched triplets were assembled according to the following criteria: female gender, age difference less than 5 years, date of operation within 4 months, difference in preoperative intermetatarsal angle less than 5°, and equal experience of the first and second surgeon. These patients, between 18 and 85 years of age and with a minimum follow-up period of 12 months, were invited to a follow-up examination, of which only 16 matched triplets of patients entirely kept the appointment. Thus, 48 feet of 44 patients were clinically evaluated using the American Orthopaedic Foot & Ankle Society scale, Foot Function Index, University of California and Los Angeles Activity Score, as well as a visual analogue scale for pain, satisfaction, cosmetic results, and functional impairment. Radiographical assessment included measuring intermetatarsal angle and first metatarsophalangeal angles. All occurring complications and revision surgeries were noted.Significant differences were observed for postoperative intermetatarsal angle between magnesium screw and pin fixation (p = 0.009). Moreover, patients receiving magnesium screw were significantly more prone to undergo the same procedure again (p = 0.03).In conclusion, if the advantages of bioabsorbable magnesium screws outweigh the drawbacks of increased costs and a higher surgical demand, this implant might serve as possible chevron osteotomy fixation method. Compression screws and Kirschner wires also show comparable satisfactory outcomes.Level of evidenceIII retrospective comparative study     

Complications and outcomes of the transfibular approach for posterolateral fractures of the tibial plateau

ObjectiveEvaluate complication rates and functional outcomes of fibular neck osteotomy for posterolateral tibial plateau fractures.DesignRetrospective case series.SettingUniversity hospital.PatientsFrom January 2013 to October 2014, 11 patients underwent transfibular approach for posterolateral fractures of the tibial plateau and were enrolled in the study. All patients who underwent transfibular approach were invited the return to the hospital for another clinical and imaging evaluation.InterventionTransfibular approach (fibular neck osteotomy) with open reduction and internal fixation for posterolateral fractures of the tibial plateau.Main outcome measurementsComplications exclusively related to the transfibular approach: peroneal nerve palsy; knee instability; loss of reduction; nonunion and malunion of fibular osteotomy; and functional outcomes related to knee function.ResultsTwo patients failed to follow-up and were excluded from the study. Of the 9 patients included in the study, no patients demonstrated evidence of a peroneal nerve palsy. One patient presented loss of fracture reduction and fixation of the fibular neck osteotomy, requiring revision screw fixation. There were no malunions of the fibular osteotomy. None of the patients demonstrated clinically detectable posterolateral instability of the knee following surgery. American Knee Society Score was good in 7 patients (77.8%), fair in 1 (11.1%), and poor in 1 (11.1%). American Knee Society Score/Function showed 80 points average (60–100, S.D:11).ConclusionThe transfibular approach for posterolateral fractures is safe and useful for visualizing posterolateral articular injury. The surgeon must gently protect the peroneal nerve during the entire procedure and fix the osteotomy with long screws to prevent loss of reduction.Level of evidenceTherapeutic level IV.     

Untreated small posterior fragment of ankle fracture with early removal of syndesmotic screw is associated with recurrent syndesmotic instability

IntroductionThis retrospective study aimed to report outcomes of fixation of bi-malleolar or tri-malleolar fractures combined with syndesmotic injury with or without posterior malleolar fracture (PMF), and to ascertain whether syndesmotic screw removal at 6 to 8 weeks or 3 months postoperatively is more beneficial.MethodsWe retrospectively reviewed patients who received open reduction and internal fixation for bi-malleolar (without PMF) or tri-malleolar ankle fracture (with PMF) with syndesmotic injury between January 2013 and December 2017 with at least 24 months of postoperative follow-up. All patients suffered syndesmotic instabilities and were treated using a syndesmotic screw without PMF fixation. Patients with bi-malleolar fracture with syndesmotic screw removal at 6 to 8 weeks postoperatively were included in Group I, tri-malleolar fracture with syndesmotic screw removal at 6 to 8 weeks in Group II, and tri-malleolar fracture with syndesmotic screw removal at 3 months in Group III. Demographic data, clinical and radiographic outcomes were analyzed.ResultsA total of 113 patients were included (Group I, n=47; Group II, n=43; Group III, n=23). Average size of PMF was 14% in patients with tri-malleolar fractures (Groups II and III). No significant difference in ankle functional outcome among groups was observed. The recurrence rate of syndesmotic instability was 10.6% in Group I, 20.9% in Group II, and 8.7% in Group III. Although the difference in recurrence rates of syndesmotic instability among three groups was not statistically significant (P=0.264), Group II showed more interval change in tibiofibular clear space between initial postoperative radiographs and last follow-up radiographs (P=0.028) compared to the other two groups. Fracture union was achieved in all patients without screw breakage.ConclusionWe suggest that the better timing for syndesmotic screw removal is 3 months, instead of 6 to 8 weeks postoperatively, to reduce the risk of recurrence of syndesmotic instability for tri-malleolar fracture without posterior fragment fixation.Level of EvidenceLevel III- Case-control study.     

Determination of optimal screw number based on correction angle for main thoracic curve in adolescent idiopathic scoliosis

BackgroundReducing the number of screw insertions while maintaining good clinical outcomes can improve the efficiency and cost-effectiveness of scoliosis surgery. However, the optimal minimum number of pedicle screws remains unclear. This study searched for factors to estimate the fewest number of pedicle screws required between end vertebrae in relation to preoperative main thoracic curve flexibility.MethodsSixty-nine subjects (4 male and 65 female, mean age: 14.8 ± 2.5 years) who underwent skip pedicle screw fixation for Lenke type 1–4 or 6 curves and were followed for at least 1 year were enrolled. Intervention technique was selected according to the size and flexibility of the preoperative main thoracic curve. Surgery-related variables included pedicle screw number, rod material and diameter, and extent of Ponte osteotomy. The effect on postoperative correction angle (i.e., the difference between the preoperative supine position maximum bending and postoperative standing Cobb angles of the main thoracic curve) according to surgical intervention technique was estimated using multiple linear mixed regression models with the preoperative supine position maximum bending correction angle (i.e., the difference between the standing preoperative and supine position maximum bending Cobb angles) as a random effect.ResultsThe preoperative maximum bending correction angle was 8–42° and had a moderate negative correlation with postoperative correction angle (r = ?0.65, P < 0.01). Multivariate analysis revealed a 1.7° (95% CI 0.7–2.6; P < 0.01) correction gain per single-screw insertion and a 1.8° (95% CI 0.5–3.1; P < 0.01) gain per intervertebral level in Ponte osteotomy.ConclusionsThe number of pedicle screws necessary to correct main thoracic adolescent idiopathic scoliosis curves can be estimated by calculating correction gains of 1.7° per pedicle screw and 1.8° per Ponte osteotomy intervertebral level. Based on these results, it may be possible to reduce invasiveness and cost for patients requiring a smaller degree of correction.     

Fixed angle plate fixation of comminuted patellar fractures

IntroductionComminuted patella fractures are uncommon and difficult fractures to manage. Multiple treatment modalities have been suggested, with little clinical data to support practice. Recent biomechanical and technical investigations have described successful plate fixation of comminuted patella fractures. The purpose of this study was to evaluate radiographic, clinical and functional outcome of comminuted patella fractures treated with a fixed angle locking plates. We believe stable fixation, which results in successful fracture union and functional recovery, can be achieved with this technique.Materials and methodsA retrospective review was performed at a single regional academic Level 1 trauma hospital. All comminuted patella fractures treated with a fixed angle locking plate (AO/OTA 34C2 and C3) over a six-year period were evaluated. Thirty-six patients were identified. Average length of follow up was 154 weeks (range 12–297 weeks). Twenty patients were available for functional outcome scoring. Primary outcome measures were: Knee Outcome Score (KOS), Lower Extremity Functional Scale (LES) and goniometer measured knee range of motion. Secondary outcomes evaluated the need for additional screw or cerclage fixation, reoperation for any reason, bothersome hardware, infection and nonunion.ResultsAverage KOS = 57.2 (20–74), average LES = 58.9 (15–80). Median extension = 0° (full extension), median flexion = 130°. Supplemental screws were used in 17/36 cases; cerclage used in 2/36 cases. Hardware irritation was noted in 4/20 patients, no patient requested elective hardware removal, one patient had failure of fixation and no nonunions were identified.ConclusionFixed angle plate stabilization of comminuted patella fractures is a viable technique for fracture fixation. Good to excellent return of knee function and low complication rates, including need for hardware removal, can be expected.     

Mini-Screws-Only Fixation Method for Small Fragments of Medial Malleolus Fractures

BackgroudOpen reduction and internal fixation is the standard treatment for a displaced medial malleolus fracture (MMFx), achieving ankle stability and bony union to prevent post-traumatic arthritis. Previous fixation techniques including tension band wiring and unicortical screw fixation are not optimal for fixation of small fragments in MMFx due to their small size and poor manipulability. Here, we describe a novel surgical method using mini-screws only for fixation of small fragments in MMFx.MethodsWe conducted a retrospective consecutive study of patients who underwent surgery using mini-screws for small fragment MMFx between April 2013 and March 2018. We reviewed the patients'' clinical characteristics and assessed the fracture features radiographically. Clinical outcomes were assessed by measuring the range of motion of both ankle joints and investigating symptomatic implants. We reviewed the radiographic outcomes of the medial malleolus and the functional outcomes using the Foot and Ankle Outcome Score (FAOS) at the last follow-up.ResultsNine patients were included in the study. The minimal follow-up period was 27 months. There was no incidental bone breakage during the procedure. All MMFx healed without reduction loss, nonunion, or implant failure at the last follow-up. Two patients had mild osteoarthritic changes of the ankle joint. The mean FAOS score of the patients was 80.99 (range, 65.44–98.42). No patients required removal of the hardware.ConclusionsFixation of comminuted fractures of the medial malleolus using mini-screws for young adult patients is a straightforward and simple technique. Safe fixation of the anterior and posterior colliculi reduces the risk of implant irritation symptoms that necessitate implant removal.     

Combination of Evans calcaneal osteotomy and STA-Peg arthroreisis for correction of the severe pes valgo planus deformity.

Twenty patients with 25 symptomatic severe flexible pes valgo planus were treated with a combined surgical technique. All patients underwent an Evans calcaneal osteotomy with allogenic bone graft and subtalar joint arthroreisis (STA-Peg) procedure. Adjunctive procedures as deemed necessary included Achilles tendon lengthening, navicular-cuneiform fusion, Lapidus first metatarsal cuneiform fusion, Cotton medial cuneiform plantarflexory wedge osteotomy with allogenic bone graft, plantarflexory medial cuneiform osteotomy, and excision of os tibiale externum. A retrospective pre- and postoperative radiographic evaluation revealed the following mean changes: lateral talo-first metatarsal angle, 16.9 degrees to -0.6 degrees; calcaneal cuboid abduction angle, 24.8 degrees-2.8 degrees; anterior posterior talocalcaneal angle, 25.3 degrees-15.4 degrees; talonavicular coverage angle, 22.7 degrees-5.2 degrees; calcaneal inclination angle, 10.6 degrees-18.6 degrees; talar declination angle, 32.4 degrees-16.4 degrees; lateral talocalcaneal angle, 18.3 degrees-5.2 degrees. A subjective questionnaire revealed that 100% of the patients stated they were satisfied or very satisfied with the surgery and achieved an average score of 93 based on a 100-point scale.     

Distal radial osteotomy for malunion using non–bridging external fixation

Background and purpose?Symptomatic malunion of the distal radius is a common problem and is treated by distal radial osteotomy. Plating is commonly used but has a high rate of plate removal. This study is a report of the functional and radiographic outcome of a prospective series of distal radial osteotomies using non‐bridging external fixation.

Methods?23 patients with a median age of 60 (18-84) years underwent distal radial osteotomy using non‐bridging external fixation and bone grafting for dorsal malunion of a fracture of the distal radius. There were no cases of intraarticular malunion. Radiographic, functional, and patient‐assessed outcomes were assessed preoperatively and until 6 months after surgery.

Results?The mean preoperative dorsal angle of 20 (5-40) degrees was corrected to over 5 (0-15) degrees of volar tilt (p < 0.001) and the mean preoperative positive ulnar variance of 3.9 (0-8) mm was corrected to 2.5 (0-8) mm (p?=?0.005). Carpal alignment was restored in 22 of the 23 patients. 5 patients required simultaneous ulnar surgery, 1 required ulnar shortening, and 4 required modified Bower's procedures. By 6 months postoperatively, all measures of function except extension and key grip strength showed statistically significant improvements in their means. The SF36 showed statistical improvements in two domains, role physical and bodily pain. There were 2 patients with extensor pollicis longus ruptures and 13 with minor pin‐track infections.

Interpretation?Distal radial osteotomy for dorsal malunion of the distal radius using non‐bridging external fixation is a successful technique for correction of deformity and restoration of function, with the advantages of being less invasive and not requiring further surgery for removal of metalwork.     

Selective fixation of the medial malleolus in unstable ankle fractures

BackgroundWhilst the lateral malleolus appears to be crucial in controlling anatomical reduction of the talus, the role of the medial malleolus is less clear. Medial sided complications including infection, damage to local structures and symptomatic hardware are not without morbidity. This study compares the outcomes of patients with bimalleolar or trimalleolar ankle fractures who underwent fibular nail stabilisation with or without medial malleolar fixation.MethodsFrom a prospective single-centre trauma database, we identified 342 patients over a nine-year period who underwent fibular nail insertion to stabilise a bimalleolar or trimalleolar ankle fracture. Isolated lateral malleolar fractures were excluded. Demographic data, clinical outcomes, radiographic evaluation, return to work and sport, and patient reported outcomes, including Olerud-Molander Ankle Score (OMAS), EuroQol-5D (EQ-5D) and Manchester-Oxford Foot Questionnaire (MOXFQ) were collected.ResultsThis study included 247 patients with a mean age of 66.7 years (range, 25–96 years), of whom 200 were female (81%). Medial malleolar fixation was not performed in 54 cases (22%). There was no significant difference between groups with respect to failure of fixation (p = 0.634) or loss of talar reduction (p = 0.157). No patient required surgery for a symptomatic medial malleolar non-union. Medial sided complications occurred in 32 (16%) of the fixation group, of whom 20 (10%) required further surgery. At a mean mid-term follow-up of 4.8 years (range, 8 months – 9 years) there was no significant difference between the non-fixation and fixation groups with respect to the median OMAS (85 vs 80; p = 0.885) or median EQ-5D (0.80 vs 0.81; p = 0.846). Patient satisfaction was not significantly different between the two groups (85/100 vs 87/100; p = 0.410).ConclusionNon-operative management of the medial malleolar component of an unstable ankle fracture treated with a fibular nail may reduce the rate of post-operative complications without compromising the patient reported outcome.     

Ability of modern distal tibia plates to stabilize comminuted pilon fracture fragments: Is dual plate fixation necessary?

ObjectivesThe purpose of this study was to examine the screw trajectory of ten commercially available distal tibia plates and compare them to common fracture patterns seen in OTA C type pilon fractures to determine their ability to stabilize the three most common fracture fragments while buttressing anterolateral zones of comminution.HypothesisWe hypothesized that a single plate for the distal tibia would fail to adequately stabilize all three main fracture fragments and zones of comminution in complex pilon fractures.MethodsTen synthetic distal tibia sawbones models were used in conjunction with ten different locking distal tibia plate designs from three manufacturers (Depuy Synthes, J&J Co, Paoli, PA; Smith & Nephew, Memphis, TN; and Stryker, Mawa, NJ). Both medial and anterolateral plates from each company were utilized and separately applied to an individual sawbone model. Three implants allowing variable angle screw placement were used. The location of the locking screws and buttress effect 1 cm above the articular surface was noted for each implant using axial computed tomography (CT). The images were then compared to a recently published “pilon fracture map” using an overlay technique to establish the relationship between screw location and known common fracture lines and areas of comminution. Each of the three main fragments was considered “captured” by a screw if it was purchased by at least two screws thereby controlling rotational forces on each fragment.ResultsThree of four anterolateral plates lacked stable fixation in the medial fragment. Of the 4 anterolateral plates used, only the variable angle anterolateral plate by Depuy Synthes captured the medial fragment with two screws. All four anterolateral plates buttressed the area of highest comminution and had an average of 1.25 screws in the medial fragment and an average of 3 screws in the posterolateral fragment. All five direct medial plates had variable fixation within anterolateral and posterolateral fragments with an average of 1.8 screws in the anterolateral fragment and an average of 1.3 screws in the posterolateral fragment. The Depuy Synthes variable angle anterolateral plate allowed for fixation of the medial fragment with two screws while simultaneously buttressing the zone of highest comminution and capturing both the anterolateral and posterolateral fragments with five and three screws respectively. The variable angle anteromedial plate by Depuy Synthes captured all three main fracture fragments but it did not buttress the anterolateral zone of comminution.ConclusionIn OTA 43C type pilon fractures, 8 out of 10 studied commercially available implants precontoured for the distal tibia, do not adequately stabilize the three primary fracture fragments typically seen in these injuries. Anterolateral plates were superior in addressing the coronal primary fracture line across the apex of the plafond, and buttressing the zone of comminution. None of the available plates can substitute for an understanding of the fracture planes and fragments typically seen in complex intra-articular tibia fractures and the addition of a second plate is necessary for adequate stability.Level of evidenceLevel IV.     

后路椎弓根螺钉固定加经椎弓根注射型硫酸钙植骨治疗胸腰椎爆裂性骨折

目的观察经椎弓根注射型硫酸钙植骨对预防胸腰椎爆裂性骨折椎弓根钉固定失败的作用及意义。方法本组66例胸腰椎爆裂性骨折患者随机分成2组：A组（行短节段内固定并辅助经椎弓根注射型硫酸钙植骨）33例,B组（仅行短节段内固定）33例。平均随访16个月,在侧位X线片上测量Cobb角、伤椎后凸角以及伤椎相对高度,功能评定采用Greenough腰痛评分法（lowback outcome score,LBOS）。结果手术前、后2组间Cobb角、伤椎后凸角以及伤椎相对高度差异无统计学意义（P〉0．05）,而末次随访2组问Cobb角、伤椎后凸角以及伤椎相对高度差异有统计学意义（P〈0．01）。LBOS评分,A组优良率为85％（28／33）,B组仅为60％（20／33）。结论经椎弓根注射型硫酸钙植骨是降低内固定失败、减少伤椎高度丢失、后凸畸形等并发症的有效措施。     

Pediatric medial epicondyle fractures with intra-articular elbow incarceration

BackgroundIntra-articular incarceration of the epicondylar fragment occurs in 5–18 % of all cases of medial epicondyle fracture. It requires stable fixation to allow early motion, since elbow stiffness is the most common complication following medial epicondyle fracture. In this retrospective study, we report the clinical and functional outcomes and the complications that occurred following open reduction and screw fixation of medial epicondyle fractures with intra-articular fragment incarceration.MethodsThirteen children who had a fracture of the medial epicondyle with incarceration of the fragment in the elbow joint (type III) were surgically treated in our university hospital between 1998 and 2012. There were eight male and five female patients. The mean age at the time of injury was 13 years (range 9–16). Operative treatment consisted of open reduction and internal fixation with one or two 4.0-mm cannulated screws under fluoroscopic control.ResultsAll of the patients were clinically reviewed at an average follow-up of 29 months. The overall range of motion limitation was about 5° for flexion–extension and 2° for pronation–supination. The score was excellent in all patients (mean 96.3). Complications occurred in four (31 %) children: two cases of symptomatic screw head prominence, irritation with partial lesion of the distal triceps myotendinous junction in one patient, and median nerve entrapment syndrome in one patient.ConclusionsIn conclusion, open reduction and screw fixation yielded excellent clinical and functional outcomes for the treatment of medial epicondyle fractures with intra-articular fragment incarceration. However, particular attention is should be paid when treating these potentially serious injuries in order to minimize the risk of possible complications.

Level of evidence

Therapeutic IV.     

Comparison of Functional and Radiographic Outcomes Between Two Fixation Methods for Extended Trochanteric Osteotomy in Revision Total Hip Arthroplasty: A Retrospective Cohort Study

BackgroundTo compare the functional and radiographic outcomes between two fixation methods for extended trochanteric osteotomy (ETO) in revision total hip arthroplasty (rTHA).MethodsIncluded in this study were 64 patients who underwent ETO in rTHA using either claw-plate fixation (claw-plate group, n = 31) or cable-alone fixation (cable group, n = 33) in our hospital from 2008 to 2020. The functional and radiographic results and complications were compared between the groups during a mean follow-up period of 64 and 78 months.ResultsThe Harris hip score and visual analogue scale at the last follow-up improved significantly in both groups, showing no significant statistical difference between the two fixation methods. In the cable group, the mean abductor lever arm, the proximal migration, and medial migration in the affected hip were significantly decreased compared to those in the contralateral normal hip (P < .05), whereas in the claw-plate group no significant statistical differences were observed between two sides. No or slight limping occurred in 25 patients (81%) in the claw-plate group and 16 patients (48%) in the cable group (P = .007). A multiple logistic regression demonstrated that claw-plate fixation could reduce the incidence of postoperative moderate-to-severe limping.ConclusionBoth claw-plate fixation and cable-alone fixation could improve the functional performance of rTHA with ETO, whereas claw-plate fixation could offer superior biomechanical results and gait improvement as compared with cable-alone fixation.     

Revisiting the original Akin technique: A comparative analysis of radiographic outcome

BackgroundThe Akin osteotomy is widely used to correct the hallux valgus and different fixation techniques have been proposed. Currently most of these procedures coexist, with disagreement on which offers the best results. The aim of this study is to compare the radiological outcome of the original Akin’s technique with one in which a staple was used to stabilize the osteotomy. We also assessed whether other factors unrelated to the osteosynthesis could influence the radiological outcome.MethodsWe retrospectively reviewed data from 118 patients who underwent a scarf and Akin osteotomy. In 60 patients the Akin osteotomy was fixed with a staple and in 58 cases no staple was used. Hallux valgus angle (HVA), distal articular set angle (DASA), interphalangeal angle (IPA) and tibial sesamoid position were measured. The presence of lateral cortex disruption of the phalanx was also included in the analysis.ResultsSix variables significantly influenced the radiological results of the Akin osteotomy: preoperative HVA, IPA and tibial sesamoid position, laterality, postoperative cortical disruption and use of a staple.ConclusionOurs results suggest that the original Akin’s technique seems to offer equal or better results than a variation in which a staple is added to stabilize the osteotomy.Level of evidenceThis is a level III retrospective case-control study.     

Cotton Osteotomy in Flatfoot Reconstruction: A Review of Consecutive Cases

The Cotton osteotomy or opening wedge medial cuneiform osteotomy is a useful adjunctive flatfoot reconstructive procedure that is commonly performed; however, the outcomes are rarely reported owing to the adjunctive nature of the procedure. The Cotton procedure is relatively quick to perform and effectively corrects forefoot varus deformity after rearfoot fusion or osteotomy to achieve a rectus forefoot to rearfoot relationship. Proper patient selection is critical because the preoperative findings of medial column joint instability, concomitant hallux valgus deformity, or degenerative joint disease of the medial column might be better treated by arthrodesis of the naviculocuneiform or first tarsometatarsal joints. Procedure indications also include elevatus of the first ray, which can be a primary deformity in hallux limitus or an iatrogenic deformity after base wedge osteotomy for hallux valgus. We undertook an institutional review board-approved retrospective review of 32 consecutive patients (37 feet) who had undergone Cotton osteotomy as a part of flatfoot reconstruction. All but 1 case (2.7%) had radiographic evidence of graft incorporation at 10 weeks. No patient experienced graft shifting. Three complications (8.1%) were identified, including 2 cases with neuritis (5.4%) and 1 case of delayed union (2.7%) that healed with a bone stimulator at 6 months postoperatively. Meary's angle improved an average of 17.75°, from ?17.24°± 8.00° to 0.51°± 3.81°, and this change was statistically significant (p < .01). The present retrospective series highlights our experience with the use of the Cotton osteotomy as an adjunctive procedure in flatfoot reconstructive surgery.